How To Use Our Website!

Рет қаралды 1,314

Жыл бұрын

In this video we explain how to use our webstore, and access the various features and resources we have available for scooter tuners!

Пікірлер: 54

@rf8294 Жыл бұрын

i have an aerox with mhr replica kit 70, mhr replica exhaust and the 19 dellorto. With what size main jet should i start tuning?

@scooterstreetau Жыл бұрын

Air box- 96. Range will be 76-84.

@Maupa812 Жыл бұрын

hello, i am currently working on my aprilia sr50r (carb) and i just wanted to know if the Malossi Digitronic will fit in a 2015 model? since it was made for 2018- models with the euro4 restrictions

@scooterstreetau Жыл бұрын

The Digitronic ECU PN. 5518130B will only fit engine of this prefix: CA81M. The earlier than 2018 version is different and has a specific set of electronic controllers.

@Isaac-pm1px 6 ай бұрын

hi would u know if the complete clutch and torque kit for the Jog 50 yous have on Ur site the same for the older model Jog (cy50 1994) model

@scooterstreetau 6 ай бұрын

Yes👍👍

@insaneboiii-uy1qx 3 ай бұрын

Hey man i have piaggio nrg mc3 2004 and its going about 60kmh and reving 7000rmp so should i buy a unrestricted cdi or change main jet

@scooterstreetau 3 ай бұрын

Try an exhaust and then change the jet, rollers and springs. If it is hitting the rpm limit yes go for the unlimited CDI.

@roke36k 7 ай бұрын

Please tell me you have upgraded parts for TNT Roma . It’s not a brand name scooter so I’m stuck in a pickle trying to find racing parts cheers

@scooterstreetau 7 ай бұрын

I believe them to be the same as the PGO engine, Minarelli (yamaha).

@ballstank3904 Жыл бұрын

Highly recommend these guys !!!

@scooterstreetau Жыл бұрын

Thanks 😆😆

@gersondelima3836 Жыл бұрын

Hey had a question you guys ship to the USA?

@scooterstreetau Жыл бұрын

@LauLauisnotreal 10 ай бұрын

Hey there, I have a piaggio zip 50 ac and I’ve installed a leovince tt pipe derestricted with the rollers that come in the kit and a 65 main jet, the problem is when i accélèrerez from bottom end to power band the scooter bogs down pretty bad, I don’t think it’s running lean because even with the choke on it still bogs down and I have no idea what could it be, additionally I’ve noticed some weird vapour or smoke in my gas tank when I take the cap off

@scooterstreetau 10 ай бұрын

You must tune until you tune it at the best function. Tuning the exhaust could take 5 minutes or 5 hours, don't stop until it is great at acceleration and improved top speed. 65 sounds rich.

@LauLauisnotreal 10 ай бұрын

@@scooterstreetau I think I’ve got it figured out, when I bought the scooter the carburettor and reeds ate the filter and I think that damaged my reeds in the process it had quite a long power band even before I put the pipe on so I think I should definitely check that before moving on, I’ll drop some updates I hope I can get some help with this I don’t have the money to splurge lol

@scooterstreetau 10 ай бұрын

@@LauLauisnotreal Check the entire fuel and air system if this has happened.

@LauLauisnotreal 10 ай бұрын

@@scooterstreetau it’s been all cleared out since, hmm it is bizzare when it’s cold and is on choke it will take off perfectly than run rich and when it heats up it will have a slow takeoff than run good I’ve fiddled with the air/fuel screw but It doesn’t seem to change anything, maybe a bigger pilot jet ?

@scooterstreetau 10 ай бұрын

@@LauLauisnotreal Is the choke closing to 100%? Has there been any modification that require a retune of the carby?

@DaveAngelic 11 ай бұрын

Hello Scooter Street, i see you are responding to all comments so i would like to ask you a question that's not related to this video. I bought 2000. Piaggio Typhoon 50 XR, one owner, bone stock with 5000 kms. I serviced it and i plan to drive it like that for aprox. 2 months just to get comfortable with scooter. My question is, if you were in my situation, what would your first 3 mods be? (Just saying, i don't want 70 cc kit since it's air cooled, i would like to get more performance from 50cc while keeping it reliable at the same time). Sorry if there are gramatic errors, your channel is great and big hello from Croatia!

@scooterstreetau 11 ай бұрын

Zdravo, dobrodošli. You have beautiful English👍. I would check everything on the engine and frame to make ensure all parts are working to a high standard, no leaks, no wear, rusted or damaged parts. Check list: Cables, filters, screws, bolts and moving engine systems. Once you are satisfied than look to buy a performance exhaust (suitable for 50cc) and include variator or rollers and clutch or clutch spring set. You will also need a main jet kit for the carby. Fit and tune all of these. I would consider this the first step for a clean sensible upgrade.

@DaveAngelic 11 ай бұрын

@@scooterstreetau Wow that was fast 😄 Thank you, and thank you for fast response. Belt and oil pump belt were changed (OEM Piaggio), rollers and sliders also, vacuum pump, air filter, fuel hose.I was told that everything else was completely fine.. Man who was servicing it removed restrictions from original exhaust, variator and carburetor and changed carb jet to 56 (if i remember corectly). Top speed is now aprox. 40 mph, before it barely went 31. Is there something to improve or is this maximum wihout performance exhaust and variator? I'm sorry to bother you, you've probably heard this question at least 1000 times🙂

@scooterstreetau 11 ай бұрын

@@DaveAngelic Realistically the improvements that you have now would be very satisfying. Adding extra parts would not really enhance the performance but only the looks. Derestricting the exhaust and fine tuning the transmission is where your gains are made. Thanks and take care👏

@unstoppablerex9534 Жыл бұрын

Hello, I have a problem with the scooter, namely the scooter was going over 85 km/h before the car accident. Since I assembled the scooter after the car accident (the machine was not touched) the scooter does not want to go over 70, I opened the variator and saw that the belt goes up to 3/ 4 variators and on the side the clutch has about 0.5 cm to climb even higher I checked the case, it was eaten from the sides, it fell from 16.6 to 16.1, I don't know what to do next..

@scooterstreetau Жыл бұрын

Remove and replace the damaged/broken parts.

@drmramos1867 Жыл бұрын

Sir what roller i'm goin to change if i want to increse top speed of scooter? Stock roller weight 17g.

@scooterstreetau Жыл бұрын

Hello, The system does not work in that way, unfortunately. If the current rollers are not optimal then yes changing the roller set to another weight will make a difference. This is the battle, working out which weight is optimal for your current set up. So trial and test different weight to see what changes are made.

@drmramos1867 Жыл бұрын

@@scooterstreetau sir no need to change clutch spring & center spring only the roller, lighter roller than the stock?

@scooterstreetau Жыл бұрын

@@drmramos1867 👍

@Octavian17 Жыл бұрын

Can i use a DR evo 70 with stock small bearing for aprilia sr 50?

@scooterstreetau Жыл бұрын

We will always use a new small end bearing when changing a piston. General rule is if upgrading one upgrade the other associated parts to eliminate a weak point.

@Octavian17 Жыл бұрын

@@scooterstreetau how do i know what bearing i need?

@scooterstreetau Жыл бұрын

@@Octavian17 Where do you buy your parts?

@Octavian17 Жыл бұрын

@@scooterstreetau scooterattack

@scooterstreetau Жыл бұрын

@@Octavian17 When you purchase the kit ask them for a recommendation of the bearing, they will have the best idea which suits their kits.

@abdidabdi Жыл бұрын

I have a 1992 zip. I have dr70, yasuni z, 17.5 carb, sport airfilter. Everything is orginal. What should i upgrade or add to my setup to make the scooter go faster (top speed)?

@scooterstreetau Жыл бұрын

Upgrade the cylinder, Exhaust and carby to start. You can do this 1 item at a time to keep the budget happy☺️

@abdidabdi Жыл бұрын

@@scooterstreetau wich one whould make the biggest diffrence now? (top speed)

@scooterstreetau Жыл бұрын

@@abdidabdi It really depends on your plan. You should choose all the parts you want and stick to the plan. Until all are changed you will not feel the full power potential. Until then just upgrade the exhaust, then cylinder carby together.

@abdidabdi Жыл бұрын

@@scooterstreetau do you think i should buy the yasuni r or the mk2 stage6?

@abdidabdi Жыл бұрын

Or do you have any other recomendations

@fotis3068 Жыл бұрын

Hey man, great videos. I have a question that isn't related to this video. I have an Aprilia SR 50 motard 2T 13' and i want an exhaust. I would like a Giannelli shot V4 but idk which one is compatible for this model. Also if this exhaust doesn't exist i was aiming for a leovince tt or an extra v2, what do you recommend me? Thanks for the response in advance.

@scooterstreetau Жыл бұрын

Thank you for watching and comment✌️. If you are staying with the 50cc engine go for the Leo TT, Yasuni Z or similar for what is available in your area.