Hey guys I wanted to do this video first and let everyone know about the memory situation with the HP Omen 30L - Intel Z490 base configuration. Below are the instructions to use XMP profiles on the 30L, also a link to HP Community forums with a lot of the discussions on the subject:
HP Community - h30434.www3.hp.com/t5/Gaming-...
Affiliate Memory 16GB kits tested to work:
Balistix RGB 3600mhz - amzn.to/33YxKqe
HyperX Fury RGB 3200mhz - amzn.to/2E6d5We
HyperX Fury RGB 3600mhz - amzn.to/347rpbZ
Corsair RGB 2666mhz CL16 - amzn.to/2FmdHHS
All Omen 30L Intel Z490/10th Gen processors owners, here is some very valuable information if you decided to configure your new Omen 30L with only 8GB or ram with the idea to add your own ram kits later and save some money.
There are several threads with customers with that exact same issue that I am having, we spent a lot of money on the new 30L and opted out of the very expensive ram that HP is offering with the idea to upgrade by ourselves, after all the Omen is marketed towards enthusiast that are expected to do a lot of upgrades and changes on their own, unfortunately we all found out the hard way that the memory upgrade is almost impossible, unless we buy a very expensive ram from HP directly ($158 for a single 8GB HyperX Fury RGB, excluding shipping and tax!!!), naturally most people would try to find a way to get their own ram in, but the way HP has done it, is only ram modules approved by them and with specific identification numbers are accepted to be recognized by the Omen Command Center in order to get control over the overclocking abilities and RGB lightning control.
After spending days with HP support, sales, parts sales, community and testing myself, I found a solution, a very easy one for everyone that wants to throw their own ram kit and activate their Intel XMP profile! Mind you first that HP's Bios is locked and there are no controls over XMP profiles, also you are still not going to be able to control the RGB, which to me is a less of a problem.
OK, on to the solution, all you need to do is go ahead and install Intel's own - Extreme Tuning Utility, or also known as Intel XTU, it can be found directly on Intel's website, use your Google skills and it will come up right away. Step by step below:
- All you need to do after installing it is to run it
- Go to the memory section
- If your memory kit supports Intel XMP, you will see the profiles there
- Select the proper profile (in my case XMP1 3200mhz, CL16/18/18 for HyperX Fury RGB)
- Accept the selection and reboot your computer
- After the reboot you will have your memory's XMP profile activated and running at the proper speed.
- If you want, you can go ahead and uninstall the Intel XTU, and the profile will still be active and working (fully tested, that's what I did myself)
- At the end enjoy your freshly upgraded Omen 30L with the XMP and timings that are intended by the manufacturer for your memory!
A few side notes:
The ram provided by HP doesn't use XMP, even if you overclock it via HP OCC, it only used JDEC and timings that are not even close to the XMP, for example my 8GB stick is rated at 18/21/21 at 1.2 volts, but after Overlocking with HP OCC, the timings are running at 22/22/22/52 and JDEC profile - all that easily verifiable with CPU-Z.
After using the Intel XTU and activating the XMP profile of the new or the old (stock) ram, everything works as intended by Kingston with the proper timings, again verified by CPU-Z
That is it, I hope that I saved all of you a lot of headaches and countless hours of testing.
Also HP I saved you a lot of money, as I am sure most people will be frustrated with this major flaw and return their computers to you without even wasting their time.
Word of advise to HP, just give a simple slider for the people that buy your otherwise beautiful new Omen series, that would enable or disable the XMP profile, it will be just enough, we can all avoid future problems this way.
And final words for people that consider configuring and buying their own Omen 30L - make sure to select the type and amount of memory that you need, yes it would be a little bit more expensive, but this way you can avoid all of the above, don't make the same mistake as me or all the other customers that decided to save some money!
Support me directly with a small coffee!
www.buymeacoffee.com/Hardware...