How The VW 2.0T FSI Fuel Pump HPFP Fails

Рет қаралды 146,342

Күн бұрын

Пікірлер: 310

@dylanrowan6626 4 жыл бұрын

Charles I did mine on my 06 Jetta about a year ago at 235k and man was it bad. New cam and pump went in and what a difference. Still going strong about to break 250k on original engine!

@briansmobile1 6 жыл бұрын

What a great resource for those with an FSI!

@ajoh30871 8 жыл бұрын

Wow this is on point. I just put my 08 Passat KOMFORT WAGEN in the shop for the exact problem. However the dealer said that because it was so severe, they also had to replace the cam, timing components and the head. When my pump failed due to the cam follower, parts of the spring had broken off and caused extreme engine damage. It sounded horrible. Thx for posting.

@kasperkosminen2679 3 жыл бұрын

So this is what just broke my camshaft! Thank you

@kart1241 4 жыл бұрын

Just blew this and I knew better! So mad at myself... had the follower riding around in the car even. Now I need to rebuild the pump with the upgraded bits cause it wore through the spring retainer into the plunger, cam, and I had a crap load of glitter in the oil for who knows how long.... tragic. Check these things!!!!

@kart1241 4 жыл бұрын

I never heard extra noise btw, so check it anyway.

@f2bclown 9 жыл бұрын

Thank you for the video! Do you have one for the Low pressure fuel pump?

@plumber802 6 жыл бұрын

I had no idea this part could fail.Thanks for taking the time to post up this vid. Oh and I gave you a thumbs up for a truly LEGIT beard!

@HumbleMechanic 6 жыл бұрын

Thank you. :)

@apizzaparty 7 жыл бұрын

ive owned my car since 55k miles. its now at 120k i was able to get about 25k out of my follower before i started to sleep less at night. now..i have to replace it every oil change interval 5k miles because i decided to get an upgraded hpfp. fun stuff. totally worth it though. good video!

@apizzaparty 7 жыл бұрын

ps. i have a 2006, how hard is it to convert to the 2007+ soft line?

@jamesbarratt593 7 жыл бұрын

Why because you have an upgraded high pressure fuel pump, do you have to change the follower so often?

@edcivicsi3435 8 жыл бұрын

Can u make a video of rebuild a fsi turbo engine 2.0 like taking apart and putting it back together.

@07gtteaser 7 жыл бұрын

Hey Charles question, I have a 08 TSI 2.0 Jetta, I recevied a code indicting a speed position sensor. Where could I locate that on the engine. Thanks in advances, Great videos by the way super helpful¡¡¡

@EdwinLopez-dh9wu 2 жыл бұрын

EW@@@a

@GvEFX 9 жыл бұрын

Great informative video

@robertwest9643 9 жыл бұрын

This was awesome! Very helpful!

@HumbleMechanic 9 жыл бұрын

Robert Jon West Glad to help :)

@lorddragoono 5 жыл бұрын

Thanks again Charles. You are such a great guy.

@nikespex 8 жыл бұрын

I had a came follower that was punched through (2006 A4 2.0T). The dealer has repaired this under extended warranty. What is the risk that metal bits from the failure might cause future problems?

@SteveRobReviews 9 жыл бұрын

Good info - 👍

@Tigger2022 7 жыл бұрын

I know I may be going out on a limb here, but would you say there is any permanent solution to this cam follower catastrophe? I find that checking my cam follower periodically could cause future damage to the pump bolts by wearing out the threads and removing the bolt from the banjo head fuel line isn't quite fun. I also have been doing some research and I found that there is a "2.0TSI roller cam conversion" for the "FSI"models. Would you say it's any good?

@V10PDTDI 9 жыл бұрын

Hi Charles have you seen any failure on the gen 2 with timing chain and roller lifter on the HPFP I personally never seen any yet .?

@HumbleMechanic 9 жыл бұрын

V10PDTDI Seen lots of the CCTA first gen timing chain HPFP failures. Nothing with the brand new stuff

@fasdude38 8 жыл бұрын

Hi Charles. Does this issue apply to the 2011 Audi TT? I'm looking at buying a used one and was wondering if there is anything mechanically that I should be worried about with their EA888 engine.

@geirmyklebust 7 жыл бұрын

Is this failure also concerned 1.6 FSI, ('06 Audi A3 1.6 FSI)?? it suddenly does not start up.

@lendellkatwaroo7371 7 жыл бұрын

This is awesome information, does this info apply to 1.6 2006 VW beetle?

@ZodiacKnight80 7 жыл бұрын

Awesome video thank you!

@MrSlowpokee 5 жыл бұрын

Nice video! very concise and thorough. I had experienced hesitation during WOT. Replaced fuel filter 1st then plugs and finally coil on plugs. Car ran great for a few days then Got an engine code P0089 which led me to this video. Thanks for sharing as I'm not in the dark with where to go next.

@dividingdan 2 жыл бұрын

dude i have the same issue right now, did you ever get it fixed?

@MrSlowpokee 2 жыл бұрын

@@dividingdan replaced leaky plastic tube on one of the emission controls. EGR pump valve was stuck as well. Sold the car shortly after. Good luck with your issues

@edwardjohnson3681 6 жыл бұрын

Great videos. I wanted some input to a problem I'm having with my 2012 GTI. The car will lose power during very hot days 95+ degrees outside after driving for a while. It will lose power while accelerating then recovers after a few seconds. Basically scaring the crap out of you at highway speeds. When reading the OBD2 I pulled a P2293 code, P0087 code and a 01038 code. This does not happen a lot, what could this be?

@demerathclark 5 жыл бұрын

This could be the [fuel control module] located under the rear seat cushion on the in-tank fuel pump. These modules tend to overheat if they are old, heat and a dirty fuel filter can contribute to this problem, as well as leaking or restricted fuel supply lines from the in-tank pump to the filter, or from the filter to the HPFP. You may also have a dirty strainer on the in-tank low pressure pump. After removing the seat cushion and inspecting, if you decide to replace the in tank pump, control module, and filter, I would siphon the tank, put a few gallons of water in the tank so that you have a good amount to flush the crap out. I use a paint mixing bit on a power drill to swirl the water and mild detergent soap inside the tank, siphon to water out and wipe the tank clean, allow it to dry before adding clean premium fuel, and change the fuel filter. The filter has 3 hoses, one hose you will notice a blue ring or tab on the fitting, if you depress that tab (pushing it in)while pulling straight out, the fittings pop right off. For the one fitting on the out side of the filter you would need to release the bracket holding the filter so that you can access the tab, otherwise it's at the top of the fitting and hard to see.

@aigoodteacher 8 жыл бұрын

My 2005 golf gti had a power lost problem while driving at 160km/h, I have checked the cam follower and it completely broken, then I changed the cam follower and I still had the power lost problem. After a month I bought a brand new HPFP, when I tried to replace the pump and I found that the cam follower was broken again in only 500km. Finally, I changed the pump and the cam follower but the car still losing power at 180km. Do you think the camshaft need to replace as well?

@VWGTI2013 9 жыл бұрын

Hey would the VAGCOM from Ross Tech work to check if I have a fuel pump problem?

@m6h24 6 жыл бұрын

Can you make a video of the cam seal replacement on a tsi? Mine is leaking and I have no idea how to do this job

@izalco1968 7 жыл бұрын

Love your videosBro', I do learn a lot from you, Thank you so much!!

@HumbleMechanic 7 жыл бұрын

+walter aguilar thank you. :)

@robertzuzek2678 8 жыл бұрын

It takes 15 minutes to replace, the cam follower was ok (repalced it anyway), the pump just crapped out. If the follower is failing there is much more going on, i.e. junk camshaft. The new followers are titanium, and the aftermarket pumps will kill a stock camshaft, so be careful...

@ellis346 5 жыл бұрын

Great video. I have just bought a gti 06 tfsi. I knew about the common problem and went to replace the cam follower straight away and found my cam follower had broken through. My high pressure fuel pump is also worn and cam lobe stratched up. It’s been running ok, will replace the fuel pump. Not sure if I need the cam shaft replaced though? Thanks guys you rock

@HumbleMechanic 5 жыл бұрын

Probably need a cam if it’s worn all the way through

@ellis346 5 жыл бұрын

Thank you for the reply, really appreciate it man. The cam lobe was quite scratched up. I would post a photo I took if I could so everyone could see and yourself. You could imagine the look on my face as I pulled out the broken cam follower 😩😩😩 the high pressure fuel pump definitely looked worn down and uneven

@roybamford8698 3 жыл бұрын

Hi mate just got a question can you use the roller type plungers tappet on a golf mk5 tfsi hi pressure fuel pump instead of the flat style follower ?? If that makes sense

@labrite34 9 жыл бұрын

thanks for the explanation. question: should I lube the outside of the new cam follower in oil, or would you suggest assembly paste? and should the inside of the cam follower (making contact with the HPFP) be dry?

@dylanrowan6626 4 жыл бұрын

You can use assembly lube or engine oil for assembly. None of the parts that aren’t visible after installed should ever go in dry. It wouldn’t hurt to lube whole plunger assembly and HPFP O ring that seals into the pump slot.

@toddcoates5584 4 жыл бұрын

Thank u for your videos. Very professional for the diy.very descriptive .thanks

@joemartines5208 3 жыл бұрын

I would like to ask if you know how much pressure the higher side of the fuel pump on a 2009vw Passat 2.0liter

@dandresser1105 8 жыл бұрын

I have a 2006 Passat with a 3.6 The HPFP runs off a timing chain gear with a cam. I'm getting the typical codes and hearing a noise from the timing chain side. Do you think that gear/cam is the root of the problem? Thanks

@Ozzaphellah 9 жыл бұрын

Hey good work on the euro cars I'm having boost issues with my A4 2.0T FSI and was wondering if you can point me in the right direction Im about 7 psi low boost I know there's 2 fuel sensors on the rail, the maf and map sensor but also the sensor on the hpfp The problem is that I don't have a check engine light on my dash When stopped at a light I noticed that sometimes the car jumps and then moves but that's about it Was just wondering any if these sensors were bad which one would thro a check engine light and which one wouldn't? Or any thoughts on this Would appreciate

@pipotol 6 жыл бұрын

clear, precise and sympathic !! thank you !!

@HumbleMechanic 6 жыл бұрын

+pipotol thanks so much

@DaGr8t1 7 жыл бұрын

Hey! I have an automatic 2010 VW CC with 108K miles on it. My check engine light recently came on and I got a diagnosis and it coded P2015 "Intake manifold runner position sensor/switch circuit range/performance bank 1". Afterwards, my engine also began to stall and shut off and right before it would shut off the battery icon would pop up on the dash. I replaced the battery and I am still having this issue with the car stalling and shutting off. Sometimes I have to get a jump in order to get it moving, sometimes getting a jump doesn't work at all. Is this a common issue or something that you have seen before? If so how do I go about getting it fixed and about how much do you thing it would cost me?

@enemy2921 3 жыл бұрын

Hey Charles big fan. I had a check engine light on my 2.0T FSI for P12A2 Fuel rail pressure sensor. After making some other repairs like torn pcv and diverter valve as well as coils and spark plugs, the code has gone away. Is there any need for me to check the cam follower if I have no check engine lights? The car was not taken care of before I bought it.

@Ardian1988 7 жыл бұрын

Hi, cool video very helpful. I recently purchased an Audi a4 2006 2.0T Quattro. The check engine light come on with code P0089. The mechanic who happens to be a german auto specialist at the initial stage said he checked the hpfp and cam follower cam shaft and it looked fine. They replaced the sensor on the hpfp, after a day the light came back on same code. Now he said its that hpfp. I can notice the car does have a little hesitation from idle and if you gently press the accelerator it jumps to second gear. I was told this is normal as its a turbo i dnt notice power reduction the car has power but it does have a slightly louder noise than normal. I am going in next week to replace hpfp and cam follower. What are your thoughts. And also are fsi engines louder i went to audi and test drove a audi a4 2012 and it sounds like my 2006 but a little quieter. Thanks

@razorback_king 2 жыл бұрын

Hi Humble Mechanic, Just recently relocated to AZ and driving in extremely hot weather (116 degrees). The car started to cut out, but didn't stall several times today. It did this for a few days, and then today, about 10 times. Today was the first day it threw the P0089 engine code. I am wondering if I actually have a problem to be concerned about, or I just shouldn't be driving around in 116 degree temps. Love to hear your thoughts. I just don't want to get stranded. Thanks! (2006 vw Jetta 2.0t)

@DiegoSepu95 7 жыл бұрын

to measure the fuel pressure to check if fuel pump is good is in the HPFP gage?

@leo72s30 7 жыл бұрын

hey Charles love your vidoes, Im a tech at a shop and a b7 audi came in with a valve cover leak, Mitchell said at was a 6 hour job and a special tool was needed to lock the cams... so they shiped it and i dint get to do the job:(. I have never done a valve cover on one of those... i just want to know if it that is really what haves to be done. if so. i will need to get that tool cause i plan on up graring my own b5 avant for a b7 avant. thank u for all the good content and keep up the good work brotha. 🖒

@develop0096 Жыл бұрын

Hi Charles, are you aware of any HP/Mechanical Fuel Pump related issues with mk7.5 GTI? One of the two bolts that hold the HPFP in place on my 2019 GTI has some how disappeared. Gone! I noticed this after the HPFP started making noise. I know these things vibrate a lot, but I am still a bit skeptical that the bolt was able to vibrate loose past the engine cover on it's own. Have you even heard anything like this before? Maybe the dealerships now check the HPFP, and maybe during my 20,000 mile service the tech forgot to put the bolt back? Now I am concerned that the driving done with only a single bolt holding the HPFP in place could have caused damage to the Follower or Cam.

@Joey-uy7nk 8 жыл бұрын

Hey I have 06 mkv gti fsi engine and i noticed that whenever I drive the car for more than an hr on a hot day and ac on the car seems to stall or lose power for a couple of seconds while driving. Then its back to normal but if i continue to drive it the same thing occurs once again. I have already replaced the coil packs, spark plugs, the cam follower was changed 3 months ago and the pump was still in good condition. What do you think the problem could be?

@moisestellez4363 5 жыл бұрын

I have the same problem did you fixed ????

@dylanrowan6626 4 жыл бұрын

Mine does this also. Sometimes rarely will throw a check engine light. Has something to do with electronic throttle and the PCM. I have yet to figure out if that’s actually the case with my car I am still trying to figure it out. Only does it when it’s hot out, never did that until I moved to Florida.

@fattonalili2221 3 жыл бұрын

I need help, between axx and bwa, do they share same fuel pump or not?

@Max34557 3 жыл бұрын

I have a 2008 Mk5 GTI with engine code BWA, is this still an issue with my engine?

@sakuratradersjapan6251 6 жыл бұрын

2007 2.0 fsi touran,When diving along and just touching the gas car jerks and misses and if you give it gas it goes away.any ideas? any help is much appreciated.cheers

@rorenzcaeservenaunekaramat8421 5 жыл бұрын

Hi, quick question I got a fuel pressure regulation 00476 error code could it be the HFP pump going bad?

@HumbleMechanic 5 жыл бұрын

It could be, or it could be on the low side of the fuel system

@jonathanclarkewater 9 жыл бұрын

Great video! I thought, oh no, another common problem for mine but I have the TSI engine 2.0 turbo so I won't get this fault.............will I?

@HumbleMechanic 9 жыл бұрын

jonathanclarkewater When the TSI fails, it is generally jump the pump. I have a video on that pump coming out soon

@WorethV12 2 жыл бұрын

Hello! My car won't start without touching gas for the first time every morning. Starts great after that for the rest of the day. The cam follower was changed. Could it be the hpfp? No errors. Also, no vacuum leaks.

@GrafsGarage3 5 жыл бұрын

2008 fsi Passat ran out of gas, p0089 and p2293 codes. Sometimes the car runs well and drives fine, then if it sits for a short period of time (20 mins in store) it wont start. Should I replace the HPFP? Or Module in the gas tank?

@chrisSVT 6 жыл бұрын

I just picked up an 08 Wolfsburg and never knew this. I'll go and check this tomorrow to make sure it's okay (mine has 108k on it and is stock). I have no CE light and the car pulls quite strong.

@HumbleMechanic 6 жыл бұрын

Good call on checking. It’s easy and can save $$$

@gavgav2006 4 жыл бұрын

Hi there, an EA111 owner from Europe, 1.4 TSI engine CAVE specifically. I might have a HPFP fail but still trying to diagnose. I don't have any error code at all. Engine stalls on idle, AFR is 10.7:1 which is very rich but on the other hand I don't have any power loss at all, no missfires when pushing it to the limits. What I also have on the other hand is backfires and oil smells gasoline. Have you ever had similar concerns? Thank you

@tyronecabrera2572 4 жыл бұрын

I replaced the high pressure fuel pump and it started briefly then I turned it off and let it sit over night and in the morning it wouldn't start. It did turn over and fuel is traveling through thepump but no start. What do you think it could be

@lorenzobeckmann3736 6 жыл бұрын

Thanks very much for your Top 5 Failures video; it brought me here. I've a 2011 CC 2.0T (standard CC) from the Top 5 Failure video I thought you are talking of ALL 2006-2011 TSI 2.0T engines. @2011 has INDIRECT INJECTION; watching this video you speak of DIRECT INJECTION. Easy enough to believe that the same problem exists for indirect AND direct. Not yet seen in my hand a camshaft, but to look at this and other videos the HPFP cam lobe appears to be a separate part removable from the end of the camshaft (certainly well attached/shrunk and with key, perhaps end keeper (not seen?) ?Can one change camshaft HPFP lobe while camshaft remains?

@JD-AlphaMedia 7 жыл бұрын

Hi Charles, great video! A+! On my 07Passat 2.0T FSI, after a brief inspection i found the cam follower to be broken, there's a hole all the way thru and the center piece metal is gone most likely into the cylinder heads and the HPFP itself has a little chewed up on the edge of the piston, where it touches the cam (due to broken follower). I know not good signs at all, but the upgrade internal kits are about 500 bucks from places like Autotech I found that insanely expensive for just a few piece of metal piston..I'm wondering If I can just get away with just replacing the piston from another used pump? and put a new cam follower, and replace the cam? How can I tell if my camshaft is damaged from this, just look out for scratches and the uneven wear on the cam lobe? Or what you've heard until here is enough for you to call it a bad cam and go ahead and replace it anyways. I'm also wondering about that broken metal piece out of the follower, where should I look for that?? Thanks in advance!!

@headstrong6523 7 жыл бұрын

John D what ever came of this? I have the same issue and wonder how long the car will last without replacing the minimally worn cam lobe.

@hondaman900f 4 жыл бұрын

Me too. Found mine all chewed up. Did you ever have issues thereafter with the metal pieces/debris from the broken follower?

@msknuked 8 жыл бұрын

i have a vw jetta gli 2.0T my timing belt rip and my valve bendes and took my head to rebuild after i put my car back together there a weird knocking and a misfiring on thw 4th cylinder and it does the same thing you said it feel like there no power but it will still drive. what can it be

@Pdubforever1 8 жыл бұрын

thanks for thi video im in the middle of a diagnosis of a no start I think its fuel related.

@thomasgarcia4426 7 жыл бұрын

I have a p0089 code saying fuel pressure regulator, could this be the cause? 2006 A3 2.0t, I just checked and the black paint is worn off the follower, I'll replace that but do I need to replace the regulator that sits under the tank? Soo many chats about this code and people just replacing pumps and filters with no solution. Any feedback is appreciated.

@leigh051985 6 жыл бұрын

Hi, have you seen the pump fail internally causing low pressure? I inspected the cam love and recently changed the follower. 1 week later I got a p0087, the high pressure was reading 19 to 23 bar. Is

@amansangha85 5 жыл бұрын

Hi did you find the problem?

@Mosstachio 3 жыл бұрын

My 2013 golf R had a fuel pressure code that went away after I replaced the fuel filter. Around 5 days later the light came back on, took it to the dealership same day, had no power suddenly. Turned out the cam follower got jammed in the housing, tore up the cam shaft, cam shaft ate the fuel pump through the spring retainer, and as far down the shaft as it could basically. Luckily I had just gotten the vehicle a couple months prior, and my gf talked me into getting the warranty 😅

@Mosstachio 3 жыл бұрын

Bad dealership though. They knew the follower had a lot of wear when they replaced the intake manifold (runner flap control arm was snapped off, requiring whole manifold to be replaced), and they said nothing about it and did nothing about it. They also didn't even change the oil after they replaced the cam follower housing, fuel pump, and camshaft. They definitely didn't take it apart a bit further to remove the metal scraps that were ground off either.

@darrylwilson7600 4 жыл бұрын

Question: I've replaced fuel filter, fuel pump control modular, low pressure fuel pump, ran good for 21 miles, next morning while warming it up it die's, still has a mind of its own, starts, runs, on and off, hot or cold. Any ideas?

@kenbaranda 2 ай бұрын

I took my dad’s 2006 a3 8p that had a p0171 and turned out the cam follower had a hole in it. We dont want to put too much money into it but still love the car. Would you suggest just getting a new follower, hpfp, and cleaning out the timing cover?

@rick.galvez.youtube 3 жыл бұрын

Is there a video or article about fails things to Reset after a VW Car is in a car accident front and/or rear crashes, related to fuel cut off switch or relays. Pls help

@simmonsbo 8 жыл бұрын

hi ,I have audi A4 2.0 Turbo, 06 how do I get the cam housing off and how may bolts

@_multiverse_ 7 жыл бұрын

Mine failed, vw Canada does not have a warranty extension for this issue. The retention nib on the hpfp was starting to get worn through, the camshaft seemed fine so I replaced the pump and the follower. Gunna check on it in 2000 km or so to see if the follower is still in good shape.

@guillermohernandez7559 9 жыл бұрын

hi, I have a 2008 jetta 2.0t tsi cbfa .I have replaced the hpfp the lpfp the fuel pressure sensor the intake manifold the pcv .but it is shutting off on me (the car that is). if I loosen the 17mm nut on the fuel line to release the pressure in the fuel rail the car will start only for a short time and then shuts off. It also has that cherpping sound coming from the engine bay. do you have any idea what it might be? I'm thinking the fuel injectors or a vacuum leak .

@Paul1PA 5 жыл бұрын

2006.5 GTI MK5 with P2540 (Low Pressure Fuel System Circuit Range). Only 50K miles and runs perfect despite CEL. Would replacing the FPCM be a good place to start?

@dylanrowan6626 4 жыл бұрын

Paul1PA Check your thrust sensor. And also check the cam follower... could very well be worn at only 50k miles especially if it is an early revision part. Mine was really bad I had to replace the cam, fuel pump, follower, and other parts that I decided to replace while I was in there .

@timgriffin4562 3 жыл бұрын

I have a 2015 passat TSI 1.8L with code po087, is inspecting the high pressure pump the same as the one in the video

@inthere2it 6 жыл бұрын

where in NC are you located?

@odellaudio2810 5 жыл бұрын

Hey I asked a question about no power fealt like clutch slip. And got the codes and this is it thank god. But the scar is gonna make me change the dag fluid also.

@iamneo1690 Жыл бұрын

Does the cam follower affect TDI engines?

@resureccion1320 6 жыл бұрын

Hi humblemechanic thank for all the help you have provided us. My vw cc 2011 has a problem out of no where is shot off and I though it was the HPFP and I order the part from the DEUTSCHE AUTO PART and i was really hoping it was that but it turns out was not and still does turns off when am driving it and it does not show check engine light. I took it to a certified mechanic and since the check engine light is not on the scanner can not read it. Any idea from where is the problem? Thank you

@sedydaud 9 ай бұрын

hey man. did you find out?so what is the problem actually?

@marcsasot4846 Жыл бұрын

I have a 2010 Scirocco R with a EA113 265HP and I was looking for the engine manual, where can I get it? I’ve been looking for it but I cant find it

@hergianfrea6797 2 жыл бұрын

Hey need help, buying a 2017 GTI, DEALER claims the check engine light is on and takes a little longer starting because owner before installed a high pressure fuel pump. Can you shed light on this? Why install one? Would this cause check engine light? And hesitation starting, like did not fire right up cranked a few seconds longer then and other vehicle i ever seen.

@RodrigoGarcia-hr9qp 7 жыл бұрын

Hi i have a tsi 2.0t and all ready change a camshaft position sensor, because it was the code i was having from the computer but my hard starting issue is there.

@jamesbarratt593 7 жыл бұрын

Hard starting can be sticking valves i heard and not correct timing. Just rebuilt an fsi engine myself, and heard that when doing the revision

@Peylix 7 жыл бұрын

I check my follower every 10k being Stage 2+. I would say 15k tops. 20k (tuned) is just too long imo. I've had my 08 GTI since 2011 and I'm on my 3rd follower.

@HumbleMechanic 7 жыл бұрын

Not a bad idea at all. for stock I think even 30k is fine if you're on the update follower. But tuned.... Yea 15k is perfect

@pipotol 6 жыл бұрын

do u know which site provide vw passat B6 TSi follower? thx

@historyboy08 7 жыл бұрын

I bought my 2007 Passat Wagon at 95k and one the road home, the CEL came on. Found that it was this issue. I had to go to the stealership several times until they could get the damn code. Luckily I was able to get it done for free under the extended warranty. If not, it would have cost me well over $1500 :/

@thehiatusprt 6 жыл бұрын

I have upgrade my HPFP for a high performe one, the Evo Technik by Autotech. But I'm getting an engine fault flash light. Do you have any thoughts on this?

@HumbleMechanic 6 жыл бұрын

wha tis the code?

@thehiatusprt 6 жыл бұрын

HumbleMechanic "too rich on fuel"

@markmacdonald188 4 жыл бұрын

If it not mapped for the new volume it will flag a code.

@chakatx 7 жыл бұрын

hi , if the follower have a hole but the fuel pump looks good , no engine light, car runs good. do i have to replace something else ? thank you.

@HumbleMechanic 7 жыл бұрын

+Cezar Fuccile the camshaft needs to be replaced. Also take a VERY good look at the pump. Odds are it's damaged

@chakatx 7 жыл бұрын

HumbleMechanic that is a very bad news . I just bought that car and I didn't know about this fail. thank you.

@headstrong6523 7 жыл бұрын

HumbleMechanic same situation here.. What's a ballpark price on replacing an intake cam? I can see some minor wear on the cam lobe, but not sure if it's worth a 4k investment or just sell it.

@michaelhenriks9405 6 жыл бұрын

What can happen if you do not replace it (did not check it yet but have no symptoms)

@jonathanzamora2234 2 жыл бұрын

Ey how u doin man i have a 06 passat with 2.0 tsi and its giving me p0004 any advice on that

@strawberryhill4307 7 жыл бұрын

Alright, so today my sister let me drive her gti to run some errands(she rarely lets me drive it) and of course the first thing I did was try to hit boost but it never even made it above 0 psi, so the first thing that came to mind was a boost leak. I pulled the codes and they were all related to fuel pressure (p2293,p0089,p0087) so would a bad cam follower cause a no boost problem? also multiple misfires came up.

@strawberryhill4307 7 жыл бұрын

yes, yes it can. I'm guessing her car went into some kind of limp mode. changed the follower (worn all the way down to a huge hole) took it for a spin and it built boost again. only one problem. when I took the follower out I found a piece of metal that looks like a valve spring retainer lock, pretty sure that's bad. HM, have you ever seen a retainer lock come out of the cam lobe??

@abirch2014 8 жыл бұрын

What are some of the symptoms of a bad cam follower? Went to the dealer and they wouldn't even check it because they said my aftermarket air filter ruined the MAF.

@HumbleMechanic 8 жыл бұрын

Almost always a MIL. Sometimes low power too.

@sampson663 8 жыл бұрын

+HumbleMechanic need help getting diesel out of my tiguan need so advice should I take it to mechanic or do it myself

@luisroman9459 3 жыл бұрын

Question i have a 08 2.0t audi pull the dip stick out while car runs it wants to stall changed the pcv valve

@tommunday829 7 ай бұрын

Hi Humble Mechanic, I have been having some problems with a 2009 2.0 TSI Scirocco. The car started to juddering on idle. The fault came up saying all of the injectors had failed ( apart from one which had previously been replaced ). My mechanic could not replicate the fault, he has had VW specialists come out and they can’t find the fault either. They put this down to a wet ECU. I’m due to pick up the car today after it being away for almost a month, having the fault still not be fixed. I’m thinking, do you think it could be the HPFP causing this fault, and how would I test for this being the case? Thankyou :)

@telmolapas 8 жыл бұрын

Hi Charles i love your show i have a fuel pressure problem in a 2.0 tfsi bwa engine code and i have a P2294, P0654, P0444 i replace the cam follower and tank fuel pump and fuel filter but i always have this codes what you think? hpfp sensors? after all this problem i can hear the tank fuel pump but not anymore thank you cheers from Switzerland

@josenaranjo2811 4 жыл бұрын

Did you ever find out what was wrong ?

@tiagogoncalves8330 5 жыл бұрын

I have that failure in my car. I ve replaced the cam follower, the old one had a hole, my HPFP doesen t seem to be damaged like the one you showed. It still has the error. Do i have to replace the camshaft and the HPFP? Thanks

@dylanrowan6626 4 жыл бұрын

Tiago Goncalves Most likely

@Maybederrepente 4 жыл бұрын

i have p0089 fuel regulator could this be my problem?? audi a42006 2.0

@lammeolebile2782 6 жыл бұрын

Hi HM. Is it possible that the pump and follower could be damaged whilst the lobe is just fine? Replaced the HPFP and the Cam follower without replacing the Camshaft and the car is running just fine, i'm just wondering what the dangers could be.

@HumbleMechanic 6 жыл бұрын

With no damage to the cam, I doubt it. But it may not be bad enough to cause an issue.

@lammeolebile2782 6 жыл бұрын

HumbleMechanic Thanks Charles

@DaytonCarCare 4 жыл бұрын

Can anyone send me (or tell me where) a photo of the order inwhich the 4 washers lay on top of each other under the two bolt sensor on the FSI HPFP?

@lilde66 8 жыл бұрын

Hi I have VW Passat B6 axz 3.2L v6 24v and I have error with the low fuel pressure regulation, Fuel pressure outside specification. I have vibrations on the engine. The error code 12555

@lorddragoono 4 жыл бұрын

I have a p2293 code and I changed the hpfp, cam, cam follower and the sensor on it. It still has alot of power but I still have the code. The Inspection is now expired and I cant drive the car. Any help would be awesome. Have spent over 1k trying to figure this out.

@natej622 5 жыл бұрын

I have a 2006 Audi A4 2.0T non quatro. Started dying at idle occasionally. Code p0087. Replaced hpfp and both thrust sensors attached as well as the regulator on top and cam follower...now it's rocket from 0-40 but after that it's a slug... almost as if turbo is cutting out. And now, after replacing all of that...I have the codes P2293 and P0089...I'm baffled. Please help, I've only had this car for 3 months and have sunk over 2k into already 😕 what could the problem be? Do you I could have the wrong sensor? I heard about the changes and recalls... please help I love the car but the wife is saying get rid of it...😔

@Gamingontrack 3 жыл бұрын

After a long run when I stop my skoda superb 1.8 petrol for long time and then I tried strat. ....it cranked but wont start ....but when i removed the front soft pipe line from hfpp and then strong petrol pressure realsed from the hfpp and my car star immediately ....please please please reply

@garyshaw8449 6 жыл бұрын

do you absolutely have to replace the camshaft if you do the tappet or cam follower? that part is expensive

@HumbleMechanic 6 жыл бұрын

+Gary Shaw if there is damage to the cam you will want to replace it

@lonewolfe7343 Жыл бұрын

My Audi s3 8p, if left for a couple of days doesn't start, the engine or starter doesn't turn, it's just dead but the check engine light comes on as does brake fault lights, it starts after leaving the ignition on for a few mins, or pumping the gas pedal.... Could that be due to low fuel pressure and HPFP or its cam fail..? Thanks

@castin5244 5 жыл бұрын

I took the HPFP off my GTI before I even bought it. In a gas station parking not. Took all of 10 minutes. Check your cam follower people. and do it often.

@HumbleMechanic 5 жыл бұрын

That is awesome!

@rudypicha5689 7 жыл бұрын

Thanks Humble Mechanic, all great/very helpful videos. my question is: once the cam follower wears through, where do the little metal parts that wore off end up going? the cam follower metal flakes/hpfp spring retainer? where does this stuff go? into the engine? if mine was covered under extended warranty, should I be concerned that I have metal flakes floating around in my engine?

@ivanvega2821 10 ай бұрын

Can this cause a P1250 and P0300 codes on a 2010 CC?

@joshuawelch9701 3 жыл бұрын

will my car throw a code when the cam lobe gets warn? im experiencing like a fuel cut issue under load , usually on highway and going up hills, can hear a rattle/chatter when it happens, ive replaced my follower a few times since ive had my car , also just did my rear chain and tensioner. but im not getting any codes.

@jodynaidoo4050 2 жыл бұрын

Hi Bud, have you managed to get your problem sorted ?

@joshuawelch9701 2 жыл бұрын

@@jodynaidoo4050 well that problem I did lol. Now got cam/crank code I’m trying to sort out. The problem was actually spark plugs.