I changed ALL of my tools to FESTOOL 🤑🤑🤑

Рет қаралды 10,247

2 жыл бұрын

While creating super high-end Arcade machines with super high end-parts, I used to use rather cheap starter-level Bosch Green and Metabo tools. Even though they did their job, now it is time to step up the game and change ALL of my tools to Festool.
Key reasons are improved dust collection and higher/better accuracy.
In this video, I take you to Festools Main Office in the Netherlands and you can see me buy the new gear as a huge table saw, plunge router, plunge cut saw, cordless drill, mitre saw and much much more!
----------
- NO SAUSAGES WHERE HARMED DURING FILMING ON LOCATION -
----------
Note: Although I am an official Festool partner now and DID get a great deal, this video is NOT sponsored in any way, and I choose all the tools out of my own interest, knowledge, and experience. Ow, and I also DID pay for them ;-)
-----------------------------------------------
Festool website:
www.festool.com
-----------------------------------------------
Tools and gear I use now:
-----------------------------------------------
- Kapex KS60 mitre saw SET
- TPC18/4 Cordless Percussion Drill SET
- CXS Cordless Drill SET
- OF1010-R Router SET
- TDK-80 Table Saw SET (Saw Stop Tech)
- TS55FEBQ Plunge Cut Saw
- Cleantec CTL26 Dust Extractor
- FS1400 2KP Guide Rail
- FS1080 2 Guide Rail
- DTS400 Delta Sander
- ES-ETSC 125 3,1 I-Plus Cordless Edge Sander
----------------------------------------------
Building your own Arcade?
I do sell the design sets for each of the builds. Or, I can make custom CAD designs for you. Contact me at thedanielspies-at-gmail.com for this
----------------------------------------------
Getting Stuck building your Arcade?
Feel free to contact me by leaving a message in the description. I read and respond to all of them :-)
----------------------------------------------
Why Festool?
I was actually planning to switch to Makita due to their competitive pricing and large amount of battery-operated tools. After getting so many tips that I also should also check-out Festool, I bought a small Festool CXS drill and really really liked it. Adding to the fact that everybody I know in the industry uses at least several Festool machines, the final choice was made.

Пікірлер: 43

@andyhello23 2 жыл бұрын

Great to see you finally went and got a proper dust extractor, its amazing the difference it makes, even cheap ones can make a big difference. Nice to see you got all these tools, so you can refine your work to even more exact levels. Hopefully you will take advantage of all your new tools, to show us more tutorials on building arcade machines of all types. You have a great knack of doing these things, and it would be great if you use your new tools for such tutorials. Your imagination in designing and making new concept arcade machines, is very good. Thanks for your videos, and like everyone else, i am happy for you, you got your new festool tools, to show us more of your unique skills in these videos. A person like you deserve to treat yourself to such nice tools. Will be great to see you do more tutorial videos showing off these new tools, on your new designs of your arcade machines. Cheers again. Most of us cannot afford festool, but in reality we do not need such quality, but its so nice that you and your channel have treated yourself to these tools. Will be great to see what you design and create next, hopefully you will make more tutorial videos showing of your new tools, and there precision, and dust free.

@cda3715 2 жыл бұрын

Nice. Very happy for you. Can’t wait to see what you make next.

@TheDanielSpies_Arcades 2 жыл бұрын

Thanks 😊 ☺️☺️

@Piglet6256 2 жыл бұрын

Deze zag ik al aankomen Daniel :D, sweet stuff!

@ejtaylor73 2 жыл бұрын

Like a kid in a candy store!!!! Very nice, looking forward to your 1st project with all these new tools, and as you figure out what all they can do, I expect to see some absolutely unbelievable projects. Using new toys to make new toys LOL.

@TheDanielSpies_Arcades 2 жыл бұрын

Thanks Eric 🙏🏼 will try not to disappoint 😄

@RICOFURNITURE 2 жыл бұрын

try to do that here in Norway , only one company sells festool , extremally expensive and you can forget about demonstration . They have few pieces on display that you can`t even plug in and if you are interested in something you have to order it.

@TheDanielSpies_Arcades 2 жыл бұрын

Ow that is sad to hear..

@RollCorruption 2 жыл бұрын

I dream of the day I can afford a single Festool item :D perhaps if they release some screws.

@TheDanielSpies_Arcades 2 жыл бұрын

Not everything they make is expensive, try to buy their CXS drill, not expensive and really well made. 👍🏽

@KrisCoolmod 2 жыл бұрын

Wow ! A Dream come true ! You will build like a Boss Your ready now for Retrobeast Cabinet By the way nice Tesla. Have the Model Y. Love it Great day and continue your great work Kris

@TheDanielSpies_Arcades 2 жыл бұрын

Thanks, Looking forward to your drive!!

@KrisCoolmod 2 жыл бұрын

@@TheDanielSpies_Arcades Ho yes my friend i will ship my Amazing Retrobeast Setup 👍😄

@alexrobles7744 2 жыл бұрын

wow.. adults toy store run.. Jelly. Did you get the shaper origin? I am so curious what you would use it for. You know when you made it big when you partner with quality tool makers.

@TheDanielSpies_Arcades 2 жыл бұрын

Hi Alex, did not get the shaper origin yet, but I will definitely get it in the future 🤩

@sylehu7056 2 жыл бұрын

Hi Daniel, I just noticed out that you were building also for customer. May I ask you if there is a place I could get information onto your offers? I do have a Krisscoolmod build and I am now looking for a proper cabinet or pedestal similar to yours

@TheDanielSpies_Arcades 2 жыл бұрын

Sure, you can email me: thedanielspies-at-gmail.com to chat about commission builds 👍🏽

@CriSaturn 2 жыл бұрын

I am your new friend and subscriber from Italy. Hey Daniel stay motivate dream and do It bigger Arcade team! 🇮🇹💙🕹️... So exite seeing your new projects come to realize.

@donannis 2 жыл бұрын

Heya Daniel.. no worries, I used cheap tools in my builds.. My problem is I don't know how to make good videos.. lol. You have the video creation down very well ;)

@TheDanielSpies_Arcades 2 жыл бұрын

And I love your builds! ;-) thanks again, Daniel

@farbraum-innenausbau 2 жыл бұрын

Welcome to the Festool community. 😉

@TheDanielSpies_Arcades 2 жыл бұрын

Haha thanks 🙏🏼

@NolTee2 2 жыл бұрын

As they say.. Well wear mate!

@rdeh1678 2 жыл бұрын

Metabo tools are not cheap tools but festool are very expensive

@troyqueen9503 Жыл бұрын

Enjoy your next level of life

@dcreationwoodworking3495 Жыл бұрын

😊💚💚💚🤘

@debandmike3380 Жыл бұрын

see, I thought as you were driving off in your Tesla the next shot will be you at a car dealership trading it in for a little piece of garbage but a huge wad of cash in your hands as you headed off to festool.

@TheDanielSpies_Arcades Жыл бұрын

Hilarious idea. I will need to do that if I will start buying #woodpecker tools 🤪🙈

@debandmike3380 Жыл бұрын

skip the woodpeckers they are just overpriced status tools. twice I was ready to buy from them and then they annoyed me during the checkout and shipping process and I just canceled I'm done with them. They may have good tools but they are not very well managed.

@l.i.twoodworks9028 2 жыл бұрын

Key word partnered up Means he will not pay what we have to pay for the same tool. No disrespect but this is the new trend.

@TheDanielSpies_Arcades 2 жыл бұрын

True, but note that I have chosen this brand by myself and was already purchasing tools from them prior to any agreement. 😃

@Caddrawings579 Жыл бұрын

heeft toch voordelen vrijgezel 😅

@TheDanielSpies_Arcades Жыл бұрын

100% haha, groeten uit Dordrecht

@simonlang2001 2 жыл бұрын

Left the drill, got the domino, even the,small one, a far more useful tool, joins buts, corners, materials, sheetgoods, together, much tighter faster, cleaner, even the small one a sds drill is far better than that fess drill or gone with the milwaukee cabinet drill kit m12.

@TheDanielSpies_Arcades 2 жыл бұрын

The Domino for sure is on my wishing list. As for the drill, when drilling in brick 🧱, this drill is much better than an sds drill as this has too much force. That is why I choose it 😊

@rdeh1678 2 жыл бұрын

That is not a drill it's a impact gun

@salttrader4113 Жыл бұрын

Correct, have one of those too, not a ton of use unless im working on my car or need an anchor in a wall.

@mushie8447 2 жыл бұрын

Mafell makes a lot of the saw machines, so why buy a overpriced Festool, why you can by the original, same with the clamps from Festool, they are made by Bessy....Love the rotex machines from Festool, but not everything...

@TheDanielSpies_Arcades 2 жыл бұрын

What if your favorite color is green? 😜😂

@johna3806 2 жыл бұрын

I'm s carpenter. Festool is a pain in the ass. Most over rated tools and over priced. I listened toy other employees bitch daily.

@TheDanielSpies_Arcades 2 жыл бұрын

I only have myself as employee and this guy kept asking for Festool. Festool this, Festool that…I finally agreed on buying these tools for him. As long as he is happy… 🤣😅