How to setup the Boss VE20 vocal performer (part 1)

No video

How to setup the Boss VE20 vocal performer (part 1)

Рет қаралды 19,432

Жыл бұрын

The complete Boss VE 20 bocal performer foot pedal setup tutorial part 1.
How to adjust the microphone volume, how to turn on or off phantom power, how to setup the outputs, how to remove low frequency mic hum and ambient noise, how to set the looper mode, how to adjust the display brightness and how to set the key scale for harmonies.

Пікірлер: 34

@MarqueeMarkVI 8 ай бұрын

This is the way a tutorial should be done. No baggage or life story added.

@IbandUK 8 ай бұрын

@Marqueemarkus Thanks 😀👍

@arlene_mora 24 күн бұрын

AMEN!!!!!!

@karansguitar Жыл бұрын

Thank you so much for this video.. Waiting for the next part.. I really want to learn about creating harmonies on VE-20

@IbandUK Жыл бұрын

@karansguitar I'm glad you found my video helpful, Harmonies is coming soon 😃👍

@dr.jerilynvogelsang3922 4 ай бұрын

Well, I guess I've been using it "not quite" the way it is intended! TY for clarification.

@IbandUK 4 ай бұрын

@dr.jerilynvogelsang3922 😀👍

@Leejay.Poichuk 10 ай бұрын

is it possible to have reverb active and with one stomp ad radio effect?

@PattysPipes 8 ай бұрын

This is great! Thank you!

@IbandUK 8 ай бұрын

@PattysPipes I'm glad you found my video helpful 😀👍

@ASIABM Жыл бұрын

👏👏 tnx man.. Frm Dubai

@IbandUK Жыл бұрын

@ASIABM 😀👍

@ferdelacruz9593 2 ай бұрын

Thanks LAD “ Phillppines❤

@IbandUK 2 ай бұрын

@ferdelacruz9593 😀👍

@yack1415 5 ай бұрын

Is there any way this can harmonize only major chords, or keep the intervals identical from note to note. I don't want it to follow the key I set it to. I want to be able to sing D and have it sing a D major chord, then when I move to a Bb I want it to sing Bb major, and 2 of those notes don't fit into the key of D. Is there a way you can set part 1 to be a major third always, and part 2 to be always a perfect fifth? I can't be restricted to diatonic backup vocals. How can I get this thing to harmonize D, D/C, Bb, A all major chords as I sing the roots?

@IbandUK 5 ай бұрын

@yack1415 If all the chords are not in the same key, you would need to be able to set harmony to chromatic but the boss Ve20 does not have that option for harmonies (only for pitch correction). The only workaround I can see would be to setup different presets in different keys and set the Ve20 foot switches to preset mode and use the foot switches to switch between presets as required, which would probably be too complicated.

@jeanpat8946 8 ай бұрын

Very clear ! Perfect

@IbandUK 8 ай бұрын

@jeanpat8946 Thanks 😀👍

@luizgomesrn Жыл бұрын

Very good video! A question: can I turn on this pedal on my keyboard? It's just that my keyboard has a microphone input, and its speakers are very good, so I don't need a mixer or an active box. But my keyboard doesn't have a harmonizer. So I wanted to turn on the microphone on the Boss pedal, and the pedal on the keyboard. Is it possible? Will the effects come out on the speakers of the keyboard? Note: my keyboard is a Yamaha SX700

@IbandUK Жыл бұрын

@luizgomesrn Thanks 😀👍 To use the Ve20 with your keyboard you would need to plug your mic into the Ve20, then plug the output from the Ve20 into your keyboards mic input (so the Ve20 output is sent to your keyboards speakers). There is no way to control the Ve20 remotely so you would need to use the Ve20 foot switches to change patch/fx.

@luizgomesrn Жыл бұрын

@@IbandUK thank you. Greetings from Brazil 🇧🇷

@rafaelrahfa 11 ай бұрын

part 2 ???

@jakoboutzen9543 Жыл бұрын

Im playing the saxophone and would like to use the VD20 to be able to use the foot pedal to swtich between basic reverb setting for when Im doing riffs in the band and a setting with extra reverb and higher volume for when im doing solo - need the foot pedal as my hands are busy working the saxophone. Need to be able to swith back and forth. Is that possible? :-)

@IbandUK Жыл бұрын

@jakoboutzen9543 Hi, to do this you would need to set up two sound patches, each one with a different reverb level, then hold down the harmony food switch for 3 seconds to switch the pedals to sound patch mode. Now you can use the 2 foot switches to change between the two sound patches, so effectively change the reverb level.

@ir.1s_sshi Жыл бұрын

Hey can u make a tutorial on how to remove breath/air noises which are caught in the recording in bandlab? Lots of love

@IbandUK Жыл бұрын

@ir.1s_sshi OK 😀👍

@Joseph124269 Жыл бұрын

Can I switch between two different effects while using one microphone for saxophone and singing and then turn off the effects while talking into the mic?

@IbandUK Жыл бұрын

@Joseph124269 In normal mode, the left foot switch switches by pass mode on/off (fx on/off) and the right foot switch turns a chosen fx on/off. In program select mode the left and right foot switches move back (left) and forward (right) through the programs. So, if you use program mode, you could set up three programs, one with no fx and the another two with different fx setups. If these three programs are consecutive (say programs 60, 61 and 62), you could then use the foot switches to move between the three programs with just one or two taps of the foot.

@Joseph124269 Жыл бұрын

@@IbandUK sounds great 👍. Thank you 😊.

28 күн бұрын

Hello, if both my guitar and microphone are connected to the Boss and 20, can I turn off the loop function on my microphone and apply the loop function only to my guitar?

@IbandUK 26 күн бұрын

The Ve20 only has one input, so mic and guitar would need to connect to the same input with no way to isolate either within the Ve20. So both would be recorded into a loop. You could record a guitar loop while not singing into the mic and that would obvious only record the guitar. Then sing along to the guitar loop.

25 күн бұрын

@@IbandUK thank you☺️