Impression Techniques for Implant Dentistry -Step by Step Splinted open tray Impression technique

Рет қаралды 57,393

2 жыл бұрын

Demonstration & Post-Production: Dr Joephin Soundar MDS
Technical Assistance : Dr Niaz Ahammed MDS
Background music: Dr Aldrin Jerry MDS (Oral Pathology)
A self explanatory Demonstration video for dental students/Practitioners about Impression techniques for implant dentistry - Splinted open tray technique
Also watch:
Impression Techniques for Implant Dentistry - Step by Step Open tray Impression technique
• Impression Techniques ...
Impression Techniques for Implant Dentistry -Step by Step Splinted open tray Impression technique
• Impression Techniques ...
Impression Techniques for Implant Dentistry - | step by step | Closed tray Impression technique
• Impression Techniques ...

Пікірлер: 28

@kaa13 6 ай бұрын

Some difficulty lies in keeping the soft tissues around the implant free of "Dura Lay" flowing so the impression light material can flow freely without being hindered by resin excess...if that occurs in such a sector like 16 17 18 , that can be quite difficult to have a good control of it...maybe putting some modeling wax there avoiding the resin excesses to flow around the Implant-transfert connexion area, easily removable after the resin has been set, can help.

@implantreeinternationalden3296 2 жыл бұрын

Excellent demo

@swamydhasrajaian2882 Жыл бұрын

Great work..

@smartdentistry 2 жыл бұрын

Excellent....

@2minuteDOCTOR 5 ай бұрын

YOU WON MY HEART . :) .. TOO GOOD .

@user-gb2po8fp9i 10 ай бұрын

Very nice

@gaurighatnekar9257 2 жыл бұрын

Finally I understood how this works!! Great demo!

@Prosthodontricks 2 жыл бұрын

Glad it helped!

@samridhikakkar4027 2 жыл бұрын

really very helpful!

@dr.jinojoy2984 6 ай бұрын

Superb well explained

@Prosthodontricks 5 ай бұрын

Glad you liked it

@aswins322 Жыл бұрын

❤

@SkyRocketShooter Жыл бұрын

Well we need to understand why we are doing this.. to make it super accurate implant position in the model for restoration. This will allow the abutment and prosthesis go in the most accurate way with the engaging hex inside. My question is how much angle of implant it can compensate to make custom abutments with screw retained prosthesis. If the implant angle is not as parallel then may need to go for multi angle abutment and do the same thing like in the video. If mistakes happens and pros does not fit then it is very expensive to fix for the lab work..

@Prosthodontricks 10 ай бұрын

Actually its depends on number of implants.. if single implant are angulated then it can be managed with a normal angulated abutment till 30degree.. but in case if multiple implant are angulated then you have to use multiunit abutment for management.

@elsayedabdelmaaboud Жыл бұрын

but I could make this in side mouth i speake about floss&wax is it easy?

@Prosthodontricks Жыл бұрын

yes..:) practice makes your work easy and perfect.

@nihalg23 Ай бұрын

Which gloves do you use here

@Prosthodontricks Ай бұрын

its a black nitrile gloves available in market..

@rajeshakula7209 3 ай бұрын

why sectioning pattern resin required? please clear it

@mohsenganji4923 3 ай бұрын

As we use a huge volume of Duralay here' polymerization shrinkage of Duralay resin during setting may be occurred so we should split it just before taking impression by a disc or hotted knife and fill the gap again to neutralise shrinkage.

@Prosthodontricks 3 ай бұрын

hi Rajesh, adding bulk of pattern resin will create curing shrinkage that will add stress on splinting with will lead minor changes in position of splinted impression coping during removal of impression from the patient mouth. that will affect the quality of final impression. to relive the stress we have to split the splinting with small disk or burs and re-splint it with a small amount of resin material. this will prevent these adverse effect..

@ashouhdy Жыл бұрын

i ve found a faster easier way for chairside , make resin sticks outside with many lenghts , when the patient comes put the pickups, measure the distance between them , take the appropriate stick readymade trim it as you want then just weild/splint it to the cylinder like attachment/connector 🙂

@Prosthodontricks Жыл бұрын

Of-course yes :), splinting with floss incorporated will give more strength for your resin framework. it will avoid unnecessary loosening and breaking of splinted impression post.

@caner1810 11 ай бұрын

Use composite instead of floss

@Prosthodontricks 10 ай бұрын

yes we can use composite for splinting in some simple cases.. but it has some limitation: light curing is not possible if we add composite in bulk leads to breakage of splinting.. if isolation is not properly done bonding and splinting fail..