Infiniti G37 // 700 Plus WHP // Stock Motor

Рет қаралды 9,456

7 ай бұрын

Join us as we discuss what it takes to make 700 whp on the stock VHR engine in this 2008 Infiniti G37
.
Be sure to contact us for a build similar to this or any product or service for your Infiniti / Nissan
.
www.sohomotorsports.com

Пікірлер: 70

@demigodq6083 6 ай бұрын

See this is the direction I should have took, instead of spending all that money going FBO

@GTR24 6 ай бұрын

What all did you buy?

@demigodq6083 6 ай бұрын

@@GTR24 everything you can to be full bolt on

@dustinvq37 6 ай бұрын

Sell it and buy a kit

@demigodq6083 6 ай бұрын

@dustinvq37 that's the plan in 2024. Most of my FBO parts will be able to run with a turbo. Intakes and headers will be for sale.

@dustinvq37 6 ай бұрын

@@demigodq6083 sell the headers, injectors, intakes, fuel pump if you got a 340. keep the exhaust. I’m contemplating selling my ported mainfolds too and just running stock

@diceloc441 6 ай бұрын

Seeing nik look like a child in a toy store in the car that they built is a beautiful thing. Keep it up guys

@SOHOMotorsports 6 ай бұрын

We love what we do ❤️

@redline350zHR 6 ай бұрын

@@SOHOMotorsportsso do we 🤩🤩

@v36vhr 6 ай бұрын

@SOHOMotorsports with the 2014+ vhr engine would you still recommend replacing the gallery gasket before going boost?

@SOHOMotorsports 6 ай бұрын

@v36vhr it is not going to hurt as we have seen some 14 plus motors have the issue where the gaskets are ok, but the hardware starts to back out.

@v36vhr 6 ай бұрын

@@SOHOMotorsports especially with solid motor mounts ect the added vibration can definitely loosen bolts. Thanks that's good to know, I'm saving up for your kit.

@user-vk9fo8uo9w 6 ай бұрын

Sounds good af 🔥

@v36coupe43 6 ай бұрын

Pleaseeeeeeee make turbo kit for g37x coupe and sedan 😔😢 im tired of getting gapped 😂

@vivi_75 6 ай бұрын

When are you guys gonna show a video of your Stage 2 VQ37 crate motors?

@grahamnostalgia1 6 ай бұрын

Nice!!!

@SirPongSanity 6 ай бұрын

Homie uploaded a SC tune in a turbo car 🫣😈 good build 🫡

@SOHOMotorsports 6 ай бұрын

😂😂

@Harper22653 6 ай бұрын

Good luck with that.

@TheMostHighh 6 ай бұрын

Is there any turbo kits for a g37x coupe

@KozeHoops1 6 ай бұрын

I’m just curious what kind of gas mileage does the car get?

@Moses-seed 6 ай бұрын

Can this set up be done on a Q70 3.7 instead of a supercharger?

@EyeFullBlooD 6 ай бұрын

Great Video which shows promise. Was anything done to the trans? I'm looking to do the same with my 370GT ( G37 ) Sedan which has a 7AT Trans, however with a Mid Mount setup. I have ordered a Fast Intentions Flex Plate, to help with this. could you foresee any issue, if my goal is reach 550-600 HP, as long as the torque numbers are low, that should be alright.

@SOHOMotorsports 5 ай бұрын

nothing was done internally to the transmission as it is a stock VHR manual of which can handle a good amount of power. Your thought process is correct with your build as you have all the necessary items to be able to achieve your horsepower goal.

@douglasbooker1794 Ай бұрын

So what was the cost range/investment for these upgrades?

@MrSlim636 4 ай бұрын

What was the total cost of this build including installation?

@thestonedhippo 13 күн бұрын

Prob 25

@skylerreed3879 4 ай бұрын

So can we get a price range on the setup? I just picked up a 2011 g37 and am considering making it a sleeper. Maybe not to the degree shown here, but I am curious what kind of cha-ching$ it's going to take.

@SOHOMotorsports 4 ай бұрын

Yes, we can definitely provide a price range, shoot us an email.and we can get it to fit your horsepowr goals 🤝🫡 Support@sohomotorsports.com

@joshedwards1591 2 ай бұрын

What was his cost out the door for the everything you did

@natephillips6890 6 ай бұрын

@SOHOMotorsports does this turbo kit fit the 2014 Q50 3.7?

@matt1271 6 ай бұрын

they only have supercharger kits for 3.7 q50s

@dannyrodriguez3233 Ай бұрын

Good information on how to get the much horse power but, nothing about how much this will cost. I think everyone would like to know how much it's going to cost for this mods .. I guess they don't want to scare you.

@craig67212 2 ай бұрын

Where is the q50 turbo kit

@GTR24 6 ай бұрын

Can a stock VQ37 (2015 model) handle 700whp or is this a unique situation?

@SOHOMotorsports 6 ай бұрын

If the torque is kept low, it can handle it 🫡

@GerardoBautista-gm5vu 5 ай бұрын

I would like to do this on my 08 g37 but live on the other side of the country, is it possible for me to transport it to you? If so would you be able to build it from bone stock?

@SOHOMotorsports 5 ай бұрын

Yes! we have a number of clients who transport their vehicles to us. Shoot us an email at support@sohomotorsports.com and we can discuss the build you are looking to do!

@wrkls_ 6 ай бұрын

Im in NC and have a 2014 Q60 S Coupe 7AT 120k og miles 30k on the engine. I currently have an Invidia Gemini FI non res HFC and am currently running Z1 post maf intake hoses with afe power magnum flow pro dry s drop in filters. What constitutes a tune? I may be knocking on the door of FI. 😈

@SOHOMotorsports 6 ай бұрын

👀

@ElEl-nk5lr 6 ай бұрын

If it was Megamind it would blow up 😆

@anthonyyoung3929 6 ай бұрын

Where is a shop located in Maryland or Virginia? That do what you do.

@SOHOMotorsports 6 ай бұрын

We are in north carolina, you can always transport your vehicle to us 👀

@MrTerror196 6 ай бұрын

What AR was this for the g35-1050?

@SOHOMotorsports 6 ай бұрын

1.01

@2spechitter 6 ай бұрын

Top mount vs mid mount, which is better?

@dustinvq37 6 ай бұрын

Mid

@Sonickart 6 ай бұрын

mid mount is arguably the most efficient type of kit with the shortest path from headers to turbo (excluxing twin turbo manifolds), easier installation too by far, no modifying power steering lines n stuff,, the up and downpipes don't have to travel up and down the engine bay, but the scavenge pump for the oil is kinda lame, and location is iffy cause technically you can get colder air, but is more susceptible to puddles and water down there depending on if you run an intake pipe or not, i had a mid mount kit with an intake pipe that gets air up from around the motor mount area, and you also can't show off a mid mount cause as far as anyone knows by looking at your engine bay, you got cold air intakes lol, if i had the money i'd've gone with a top mount, but mid is easy to fab and install and "technically" more efficient but the upper limits of both types of kit well surpass the torque limitations of stock vq engines anyway.

@gupallday4483 6 ай бұрын

Can that kit fit 3.7 q50

@SOHOMotorsports 6 ай бұрын

We have not verified fitment on a q50 yet

@willb7758 6 ай бұрын

Well hurry up I need to buy 😅

@SONDAEY 6 ай бұрын

How much would this cost?

@magmaapex3218 6 ай бұрын

Bro this is atleast like 20k in parts and labor

@SONDAEY 6 ай бұрын

@@magmaapex3218 sheesh 😥.... lowkey wanna put a B58 in a Q 😅

@redline350zHR 6 ай бұрын

Too bad they never answer this question or even give an estimate as a comment reply. Unfortunately

@jaredromero5114 6 ай бұрын

Black on black but grey/beige headliner smh my head. Why Nissan? Whyyy?

@SOHOMotorsports 6 ай бұрын

Bc nissan 😂

@redline350zHR 6 ай бұрын

Dude i say the sameeeee thing with my 350z….i need to do black suede headliner

@gupallday4483 6 ай бұрын

Dam 700whp..go vq is better than vr 30

@2seep 6 ай бұрын

A vr30 does 750whp with 585lbft of torque and much cheaper to do so, no modification neccesary.

@Sneezeaddicts 25 күн бұрын

@2seep true, Vr30 will make more when is Vr vs VHR tranny. But the 6 speed 370 and G's are starting to get to the 800whp with just an upgraded clutch and it's cheaper than having to build the tranny on the Q50/Q60's. I like both platform, but the 3.7 manuals seem to be a great turbo route.