THANKS FOR SUPPORTING THIS GREAT PRODUCT!!! Crown Stop Fences by FastCap - www.fastcap.com/product/Crown-Stop-Fence

Just dropping a comment to say I love your videos overall. As a carpenter for 8 years I have learned a lot, but I still have a lot to learn. Got through an apprenticeship doing a lot of framing, roofing, siding, drywall, and some trim. Finish work is what I enjoy the most and I hope to one day do it with the same quality and efficiency as you do. Your videos have helped me so much already, and I'll be trying to get through them all one day. Keep it up!

Man my wife is gonna ban me from watching your videos😂😂😂. This is definitely a production upgrade.

Fast Cap is a great innovator that continues to impress. Now, as others have pointed out, they need to develop similar fences for other major brands / saws. .

Love this. I always had my crown stop in the front so I had to dedicate the time to only doing crown, because cutting on the flat was not available until I removed it. Great tool. I would buy these for sure as a finish carpenter using my miter saw every day.

Definitely worth it for a professional trim carpenter. The extra efficiency you would gain makes it a no brainer.

If people reply to this comment, what saw would you like to see us make next. We will use this feedback to determine which saw we do next. Thanks everyone. Scott Fontana

I thought you were going to say $450.00 or something. 150.00 isn’t bad at all if you’re a professional. They’ll pay for themselves many times over real quick . I love it that the stops stay with the tool. You’ll never have to search for them if they were to get misplaced.

I dont need one but you make me want one

Outstanding job explaining everything.

Love it..can’t wait to order some,of course through your link! You need to be compensated for the xtra time it takes for sharing your knowledge..thanks Spencer

Thank you, Spencer great video!!!

Thanks foe the info!! Just orderd a set for my Dewalt!

This is a fantastic product. Great job on the video Spencer 👍

Thanks for sharing this product with us got to have them

Man I literally ordered it a few minutes into this video😂😂. Gotta love FastCap.

Good video. Great explanation as always.

Great informative overview of the crownstop fence Spencer! This was a nearly perfect product when it was submitted to fastcap initially a while ago and was improved even more with feedback from the beta test tradesman group over a few months of testing to get those wishlist features in there (higher fence height, better knobs, and a few other tweaks.) I've all ready chucked my factory fences in the trash. Great add on for the Dewalt saw line up. I think there is only one of the many dewalt saws that you have to watch how close you set the stops to the blade as that particular model (carpenterone3's has that saw) must have a different stop block in the receiving part of the factory fence slot. Easy fix to just trim/grind it for that specific model. Great video!

Buying these! Was eyeing kizen but didn’t like the narrow crown stop. Really like the elongated crown stop on these. I’m sold

I purchased them about 3 months ago and love it. Well worth the money if you’re a pro.

*Welcome back*

I had to sand mine to get them to slide smooth too. That was no biggie. One of my favorite aspects was that the fence was perfectly square to the base on both sides. The original fence was off, leaning back more than 1/16 .

Game changer💯👏👏👏👏👏

Thanks!

Been looking at the Kizen fence for a while now, but just didn't want to spend the $450. It's much more versatile though, and I don't use stop blocks for miter cuts very often. I think I'll order a set of these, as the crown stops are the main thing I need.

Just put in my order!

Was looking for details on the outfield support tallies L & R with your stop block assembly looks intriguing

Well….I know what my wife is getting me for Christmas ! Thanks to you….😂

No brainer,total game changer

If Woodpecker sold them they might deem it equitable to trade for your truck straight up! One thing about these operations is they do not mind taking your money.

I think they will be worth every penny!

I wonder if they make it for the New 12 inch Makita miter saw?

These are great. The Kizen fence has a similar crown stop which I believe is a bit more versatile HOWEVER the trade off is that the Kizen is quite thick in comparison. Will be interested to see if Fastcap starts making these for other saws.

Fast cap please make these for Festool Kapex!!

That's the same problem I had when I got mine but after sanding it fits like a glove

Have you any problem with the tool belt? Advise for a pain back thanks

I use the Kizen fence which has pins that are removable, so you can bounce back and forth to cutting base vertically or anything else without losing your crown setup. It would be a no go for you though because it adds thickness.

The stock sliding fence doesn't remain square after I tighten the nut. Are the aftermarket units square after you install them and tighten the back nut? Thanks

Thanks for the review. I bought mine as soon as Fastcap had them available. I had the same problem with the left side fence. Had to file it down a bit, then it worked fine. I also noticed they sit out just a bit from the fixed fence and found them to lean in a bit more compared to the factory fence. Am thinking of trying to file them to correct them. Do yours sit in correctly or do you have the same problem? Otherwise I like them, using mostly for cabinet crown.

Those look like a must have! Do they only work on DeWalt saws? I'm a trim carpenter as well, but currently using the Bosch miter saw

I like the extended custom base platform do you have any plans that you would be willing to share? I'd like to build one like it for my saw.

Too late to share the link to your video on wainscot where you demonstrated the pivot point concept?

Take my money

Wondering if you can think of any advantages of using the stops on the fence rather than the crown stop on the base of the saw. Thinking of building myself some miter wings and want to know if I should router out a crown stop jig in them. Thanks Spencer

How do they flush up with the bottom of the fence once you tighten them up? The right side factory fence on my saw tips the top back a light sixteenth when you tighten it up and there is really no way to shim it.

Will these fit my ridge 12 sliding saw

Kind of confusing but interesting.

As a cabinet installer cutting prefinished trim. It's very difficult to find a good square saw out of the box,and can take a lot of time to get bed/table/back in plane and at 90°. Are they machined properly? A prefinished outside corner separates the diy,from a professional.

👍👍

Are these square (coplanar really, and square to the table) with the low fence? Otherwise seems like a great upgrade to EZ fence

Will they make it fthe 716!??

They may appear pricey, but you make money with them everyday and save time = investment.

Is there a way to modify them to fit DWS716XPS?

Too bad they only have them for dewalt

You're going to make me swap out my three Makita LS1013's for a 12-inch Dewalt miter saw if you keep content like this coming down the pike! 🤣

Does this fit on the new cordless?

you would think dewalt would just build this from the start... hint hint dewalt

Too much maybe to ask a saw manufacturer for flip up crown stops that are built into the base of the saw. Flip up for crown and down and recessed out of the way - for base or flat stock. Possibly building this feature yourself into your wings might be an interesting project. Crown stops at the saw base are going to provide more consistent cuts than crown stops at the fence IMO. Of course shorties will not reach a stop on the wings but that’s a good time to just use a pencil mark on the base of the saw. And now for a little bit of a rant. What I liked best about this video is that you filmed it in front of the trump border wall. You get a close look at the mismatched heights of the lower line of the entire “bulk head”. Any idea why it drops in that one section. Still looks like a mistake that the architect, designer or framer should have picked up on. The interior design elevation drawings (from the slat wall video) shows the intent for that line to be continuous over the support columns. But field conditions show otherwise. Somebody should own that one, IMO. Hard to rant about anything on this channel but I try.

Does Under Armor send you stuff?

I get the idea, but as a woodworker of 15 plus yrs.. some of these things are overkill imo..ive been screwing on a peice of wood to the fence for yrs..yes the pivot point moves but just use a tape meausure..and it also works as a zero clearance ..none of those aftermarket fences are zero clearance..please dont become a sales man even if they send you free stuff..ive never used anything like that ever so i dont see any need..bit to each there own..

Value value value

Not to salty in my opinion. But maybe a little bland🥹🥹