Install Auto Bed Leveling Probe: CR TOUCH or BL TOUCH on Creality ENDER 3 PRO

Install Auto Bed Leveling Probe: CR TOUCH or BL TOUCH on Creality ENDER 3 PRO - ABL 3D Printer

Рет қаралды 57,066

Жыл бұрын

‪@GreggAdventure‬ walks you through, the entire install (including Firmware) of a CR-TOUCH (or BL Touch) on a Creality Ender 3 PRO, 3D Printer. This will also apply to an Ender 3 V2, and Ender 3 MAX
Help this Channel continue to exist: Use my Links:
Amazon: amzn.to/2miGQq9
Creality: shrsl.com/424l2
Bambu Lab: shrsl.com/46lky
Anycubic: shrsl.com/4gssz
Biqu/BTT: shrsl.com/4l9jz
Sovol: shrsl.com/4l9k2f
Sunlu: www.sunlu.com?sca_ref=4022320.F0sV6y4ht9
Send a TIP: Click the "💗THANKS" button, or Venmo.com/gregg-cerenzio
Become a Member, by clicking "JOIN", or this link:
/ @3drundown
Learn with me!
My 3D Printing Udemy Course:
3DRUNDOWN.COM
CURARUNDOWN.COM
BAMBURUNDOWN.COM
Support me via Patreon: patreon.com/3drundown
Upgrade your FDM Printers:
Get The Smart Kit Here: amzn.to/328eBDr
Get Cloud box, here: amzn.to/33fePJd
Get a Logitech Webcam Here: amzn.to/3JUpFFI
Get a CR-TOUCH Here: amzn.to/3oWhrnK
Capricorn Boden Tube: amzn.to/3FABHBp
Creality Official Metal Extruder: amzn.to/3JBeguj
Nozzle Cleaning Kit: amzn.to/3JsK307
Razor Tool, for easy Stubborn Print Removal: amzn.to/3pQ7Jnr
Find me on Facebook: / 3drundown
Find me on Instagram: / 3drundown
My Udemy Course: 3DRUNDOWN.COM
Find me on Etsy: GAETSY.COM
#3drundown #3dprinter #cura

Пікірлер: 195

@3DRundown Жыл бұрын

Have I helped you? Help ME, continue to help others: Consider a TIP, or my Patreon: www.paypal.me/cerenzio / www.venmo.com/gregg-cerenzio Support me via Patreon: patreon.com/user?u=73422599 Use my Amazon Affiliate Link when shopping: Amazon: amzn.to/2miGQq9

@durango5281 3 ай бұрын

I appreciate your conciseness and description of screws and the different views, when I followed a tutorial to build the Ender 3 he started to forget to tell you what screws to use half way through and he also didn’t show a great view of what he was doing

@durango5281 3 ай бұрын

I looked at your other vids and you have an under appreciated channel you just earned yourself another sub

@3DRundown 3 ай бұрын

Thanks much. My style is SO tedious, and a ton of work, but, I do think it pays off. When I watch something, to learn, I want every detail. It drives me nuts to be pausing, and rewinding, and jumping through hoops, when something I need, is breezed over, so, I think of that, when I shoot, and go over EVERY DETAIL. It's nice to see it appreciated. :)

@3DRundown 3 ай бұрын

I work so hard at this. I am hoping, one day, things will pick up.....

@Lucius66266 6 ай бұрын

I cannot tell you how many videos I’ve watched trying to figure out what I’m doin or where something was wrong. Your video is the only one that clarified my issues and I cannot thank you enough for this tutorial, keep up the good work!

@3DRundown 6 ай бұрын

Sweetsauce

@stoja10 9 ай бұрын

you have earned a follow. this was one of the best tutorials i have had to follow. waiting for firmware to finish install :)

@brainpilot973 Жыл бұрын

I just followed your instructions and had to say how much I appreciate your video. That was awesome! Thanks.

@3DRundown Жыл бұрын

Sweetsauce 🤜🏼🤛🏼

@ethanbadger2084 16 күн бұрын

Incredible instruction. You leave no room for question my man, well done.

@3DRundown 16 күн бұрын

That's the plan brother. Thanks so much. Your words mean allot. :)

@overlordchin 11 ай бұрын

Thank you for this very straight forward guide on installation and firmware update.

@glenmcwhorter 11 ай бұрын

Very clear, easy to follow instructions, thanks!

@lukesmith1519 10 ай бұрын

I love how clear and thoughtful you are with how you present your instructions.

@3DRundown 11 ай бұрын

Join this channel to get access to perks, such as priority message replies: kzfaq.info/love/bUb8QjvZiimB-8sN6oDl9Qjoin

@RotaFury 5 ай бұрын

Been trying to upgrade motherboard and add a cr touch for a few days now and this really really helped. So far best vid ive found and easy to follow along! Got got to get my level right and ill be watching your vid on that next

@3DRundown 5 ай бұрын

Have I helped you? Help ME continue this channel with some support: TIP: Click the "💗THANKS" button Become a KZfaq Member, by clicking "JOIN" Support my Patreon: patreon.com/3drundown Use my Affiliate Links when Shopping: Amazon Link: amzn.to/2miGQq9 Creality: shrsl.com/424l2 Bambu Lab: shrsl.com/46lky Sunlu: sovol3d.com?sca_ref=2756755.r8WNQiJdNf Sovol: www.sunlu.com?sca_ref=4022320.F0sV6y4ht9 Support me via my Course: 3DRUNDOWN.COM

@d3w4yn3 7 ай бұрын

At 5:13, I thought this was being narrated by Gene Wilder, but then, maybe not. This is a perfect video, no fluff, but yet, you didn't leave out anything and included a couple of useful tips that I keep forgetting about no matter how many times I make some kind of a modification to one of my printers. Well done, good Sir, well done!!!

@3DRundown 7 ай бұрын

🙌🏼🙌🏼🙌🏼 "You get NOTHING. You LOSE"! 😂😂

@realtalkcreates 10 ай бұрын

thank you so much for the help you made my cr touch easy to install ill be looking for your other video asap

@robertpelland5649 10 ай бұрын

Clear, precise, and easy to understand. Thank you for your time.

@sotomp35 Жыл бұрын

Thanks fixed one of my issues now with the leveling issues.

@dammson5749 Жыл бұрын

Man! Big thanks!!! I tried for hours

@3DRundown Жыл бұрын

Epic! Happy to Tag-Team and get that done. Stay tuned for more on the 3 PRO, and hit that "SUPER THANKS" Button. :P

@justinmiller4128 9 ай бұрын

very very precise and helpful, cheers mate

@3DRundown 9 ай бұрын

@flyback_driver 7 ай бұрын

Thanks man, I just changed my driver board from the 4.2 to the quieter one (can remember the nomenclature). I completely forgot how to do this when i installed the probe over a year ago.

@user-vc7my3eb2r 8 күн бұрын

Amazing tutorial, thx for being very thorough.

@3DRundown 7 күн бұрын

Tedious, but I think worth it.... Welcome. 🙏🏼

@shanedublin27 8 ай бұрын

Thank you, helped out a lot!

@3DRundown 8 ай бұрын

Very welcome!

@chickenbomb30 Жыл бұрын

Thanks for the video, it helped a lot! One thing to note, on the BL touch a solid red light means it's working normally. It threw me off at first lol!

@3DRundown Жыл бұрын

Yes indeed. That is an odd choice. It's the blinking you don't want

@jw200 Жыл бұрын

Yeh, more logical would be green for OK and failure/error RED

@msahinkamci Жыл бұрын

Thanks!

@hadbanger0118 Жыл бұрын

Thanks mate helpdesk a lot but when do you upload the Video with the rest of the Installation?

@hadbanger0118 Жыл бұрын

Okay forget it I found it its the Video bevore😂😂

@CrazyDino698 Ай бұрын

I have the regular ender 3 what firmware should I use because I don’t have the control section on my printer and nothing shows up when I use the put the firmware in I tried using the pro 32 bit one you showed and nothing happened so I tried using the the regular ender 3 32 bit for V4.2.2 and still nothing

@ZbysioR 9 ай бұрын

great video.

@3DRundown 9 ай бұрын

Thanks much

@shanelaycock1884 7 ай бұрын

Ive followed you instructions and also add to my gcode for the mesh lwveling but un sure what to do next

@3DRundown 7 ай бұрын

I got you, follow this: kzfaq.info/get/bejne/p8V9jLyLl83LcY0.html

@Noble6. 7 ай бұрын

Thank you for the reassurance. I very much was scared. 2:26

@3DRundown 7 ай бұрын

I don't blame you. Get comfy working with your hot end. It's a necessary evil. You be fine. 💯💯

@shotzonyou 6 ай бұрын

I'm very thankful for modern tech. Everything worked great from assembly to firmware until the screen was in Chinese. Easy google translate threw camera and I was able to switch back to English. There is prob a way to have English as primary if I edit the Bin file but I'm to lazy to learn that one right now. Now off to watch how to actually level the thing. :) Great vid. 👍

@3DRundown 6 ай бұрын

Your firmware should absolutely be defaulted to English. Also, I use this firmware on my Three E3MAX (donate $2 for access. Worth it): marlin.crc.id.au/

@3DRundown 6 ай бұрын

Let's level her: kzfaq.info/get/bejne/p8V9jLyLl83LcY0.htmlsi=le0g-V1iAR26yhWF

@BisonWorkshop 8 ай бұрын

hey man, great video. but theres a problem. you didnt tell us where to adjust the bed springs. i seen another video where he got 4 bushings with his cr touch i did not get those in my cr touch. so now i cant home it or get the bed to be at the correct height. and home is now in the middle of the bed instead of left front corner. please help.

@3DRundown 8 ай бұрын

Here you go: How to Level, Set Z Offset, and Make ABL Mesh, on an Ender 3 MAX or PRO with CR Touch & BL Touch kzfaq.info/get/bejne/p8V9jLyLl83LcY0.html

@carlosa.ascencio4148 6 ай бұрын

Great video. Thanks! Do you happen to have a video with firmware instructions when installing a BIGTREETECH SKR Mini Motherboard with touchscreen? Everywhere I've searched many people are having problems with BLTouch and/or motherboard not working correctly. Thanks again in advance.

@3DRundown 6 ай бұрын

I'm a HUGE fan of the Ender 3 MAX. I have 3 of them. However, I only use Creality hardware on them, so, sadly, I do not.... However, they work great with the CR-TOUCH, and Creality Mainboard. However, I do not use Creality Firmware.

@crochetwithmouse8160 6 ай бұрын

I can't find where to plug in my wires. My motherboard is a different version. It is a 1.1.4

@Henfredemars 9 ай бұрын

My screws just won't reach the thread. By watching your video I see that my screws are too short compared to what you're using. Getting closer!

@AgneloSladen Ай бұрын

I lost power during the firmware update, does that mean my board is fried or is there anything I can do to fix it? It just sits on a blank screen when powered on

@3DRundown Ай бұрын

Rename the file and try again. It will only read a file name once

@chilson88 6 ай бұрын

Yet another great video, I really like the fact that your videos are at a more human level not at level 1000 making me pause the video several times to see the last step. One quick question, is it possible for the fans not to cool the horned as efficiently with the new ABL plat attached. Could the ABL attachment plate be secured over the fan shroud? I’ll be installing my ABL in the morning

@3DRundown 6 ай бұрын

Do as as shown here. Keep in mind the air flow to the nozzle comes out a little duct at the bottom of the fan. Also, thank you.... I like to speak to peeps like a HUMAN. I hate having to rewind, pause, freeze frame. Wtf he do there!? So... my painful pacing is intentional. :)

@chilson88 6 ай бұрын

@@3DRundown thanks for the information. I was recently gifted a used ender 3pro. It has some slight issues and has been sitting in a closet for over two years. I have found your videos the most useful and easy to understand. I have several saved in a playlist from things like what to check and fix along with upgrades/mods I’ll be doing.

@paulbumgardner4158 6 ай бұрын

Hey just having some trouble with updating the firmware. I confirmed that I have a 4.2.2 and downloaded that but it isn't automatically updating and I can't figure out why.

@3DRundown 6 ай бұрын

Use a different card. 32gb or smaller Formatted in Fat32 Bin file on the root directory. Rename the file. Any new name. In the machine while off. Turn it on

@Nightshade0329 Жыл бұрын

I have an ender 3 pro and I am getting the "no tf card error " after installing the creality firmware. This seems to be a common issue I am seeing online but I haven't found a good fix yet. My SD card is formated correctly and has all of the files in the correct spot/format as well. I have reformated and wiped the SD seceral times with no luck. From my understanding of what I have read online this may be a creality firmware issue. Any tips/videos on how I could fix this?

@3DRundown Жыл бұрын

Step 1: Use a different card. Sometimes these machines reject cards. Also, the stock card is garbage. I use these on all my machines: amzn.to/40JGxqm Be sure to format in FAT32, and use 32gb or less. Pop the card in, and manually save settings with the firmware. That may help trigger the machine to recognize the card.

@nsmstrikers5820 Жыл бұрын

Mine is just showing a blue screen

@isaacwoulf4722 6 ай бұрын

My ender 3 has the option "configure" instead of "control" and it doesnt have the bltouch or bed leveling options after following your instructions

@3DRundown 6 ай бұрын

Did you install the firmware version that supports the touch? Make sure of that

@CoBobo100 4 ай бұрын

Does it matter if i have an all metal hot end, direct drive and the silent stepper motherboard?

@3DRundown 4 ай бұрын

nope. Should def have an abl

@CoBobo100 4 ай бұрын

@@3DRundown alright... I'm stumped, I bought this ender 3 pro with the micro swiss hotend already installed it has the v4.2.7motherboard on it and I was told that it has custom firmware already on it. I just got my CR touch installed and cant seem to figure out how to enable it. I have only been doing research for an hour but it would be helpful for some insight from someone who knows better than me!

@3DRundown 4 ай бұрын

The firmware MUST support BL-TOUCH or CR-TOUCH (they use the same firmware). If you don't have a TOUCH, the firmware will NOT support the Touch. So, since you didn't have one, the firmware needs to be changed. This place has great firmware: marlin.crc.id.au/

@roekie6221 Жыл бұрын

im having problems with getting the firmware on my printer! and with what app do you open the file cause i got it on notepad and it doens't work! and i think thats the problem. pleaze help!🙏

@roekie6221 Жыл бұрын

love the vid tho!❤

@3DRundown Жыл бұрын

Just copy the .bin to the root directory of a memory card that is 32gb or less, format in Fat32

@3DRundown Жыл бұрын

Pop it in, turn the machine on

@user-rk7yg8qs6o 6 ай бұрын

I’m very nervous it changed everything into Chinese or Japanese I’m not to sure which and I don’t know how to remove the firmware but the light on the cr touch is purpleish color

@3DRundown 6 ай бұрын

Hi. I replies to this, with a link, but now I don't see it.... did you see it?

@zayedson711 6 ай бұрын

Scroll down to the one before last is the language

@user-rk7yg8qs6o 6 ай бұрын

@@3DRundown no

@muffinspree 5 ай бұрын

@3DRundown can I have the link?

@tetterest 7 ай бұрын

Your wires are going to chaffe where they exit the motherboard housing. There's a reason Crealty put double insulation on that harness like that.

@3DRundown 7 ай бұрын

Nope. Endless hundreds of hours on this machine. Good as new. Made many $1000's on it

@GeoSmithSr8 10 ай бұрын

Hey @3DRundown I was wondering if these steps also work on the original ender 3

@3DRundown 10 ай бұрын

Hesitant to say. It MAY be. The ender 3 is pretty old. The PRO, 100% works with it. Comes down to the board. Gotta see what board you have

@chaseswope512 8 ай бұрын

Did you have any success? I’m having trouble getting my printer to install the software? I too have the original ender 3

@matthasecoster4266 Жыл бұрын

My board is labled Creality 3d 1.1.3. What should I do?

@3DRundown Жыл бұрын

This is a very old board. You should be able to install the 1.1.4 Firmware on it. I have not used that board myself

@user-hi9dj2ub7g 6 ай бұрын

I installed the cr auto level (creality ender 3) and now the filament doesn't stick to the bed. I think it's TOO far away from the bed. And if i move it it stays on the same level

@3DRundown 6 ай бұрын

You need to set your Z-OFFSET

@3DRundown 6 ай бұрын

Follow this video: kzfaq.info/get/bejne/p8V9jLyLl83LcY0.htmlsi=Cz1iZjp4gJ5Mc_w_

@mteverett4894 Жыл бұрын

Thank you! But my printer seems to stop mid print and freeze now

@3DRundown Жыл бұрын

After Probe install? Check all your wiring. What Firmware are you running

@mteverett4894 Жыл бұрын

@@3DRundown yes after the probe install. All the wiring looks fine. Marlin Version 1.1.2

@HOTDOGGAMING Жыл бұрын

when I put the sd card in with the new firmware, the screen remains blue and nothing happens

@3DRundown Жыл бұрын

Did you wait a bit? Sure it's the right FW for the Right Main board version? 4.2.2 or 4.2.7Use a different card with just the FW on it.

@montgomerybagwell3270 Жыл бұрын

Need some help here. Followed instructions, when i inserted chip in machine and turned it on it stayed at the blue blank screen before ender logo for about 10 minutes before i shut it off and turned it back on. It seems to have updated beacuse i have the options but it now will register that the card is inserted on home screen but will say no FT card. Yes ive tried 3 cards now 8g, 16g, and 32g and all formated to FAT32. Any help will be appreciated because i cant seem to fix this issue at all, even tried reinstalling it.

@3DRundown Жыл бұрын

32g Fat 32 should work. Did you try a different card? Do you have at least one GCODE file on the card?

@montgomerybagwell3270 Жыл бұрын

@3D Rundown yes I've tried 3 different cards, and i have tried original gcode test print, and another gcode.

@coreycadwell967 7 ай бұрын

I am currently having the same issue@@montgomerybagwell3270

@viewtifulroy 7 ай бұрын

Well I see I forgot to uninstall my z stopper. So far no one has told me to do that part. I'll try it tonight with a test print.

@3DRundown 7 ай бұрын

Yup. It's gotta go. Z offset is now controlled at the firmware level. Endlessly better. 💯

@realtalkcreates 7 ай бұрын

whats the firmware to remove the cr touch firmware my cr touch isnt acting right at all lol

@3DRundown 7 ай бұрын

Can remove it and install a Z-Stop Switch and non Abl firmware. But don't do that. Sus out your Touch issue

@bilalqazi2336 Жыл бұрын

Hey everyone please correct me if I’m wrong I am still very new to this, but isn’t the wiring to the mother board backwards? Granted my BL TOUCH is a duplicate and not the original , my printer was freaking out on display and feint burning smell was coming . I checked the board and nothing seemed to be damaged but it works now that I flipped the wiring . Please help

@3DRundown Жыл бұрын

Your knockoff may have the colors of the wires backwards.

@bilalqazi2336 Жыл бұрын

@@3DRundown that could be it , thank you for the amazing guide , I got everything to work except the extruded lever snapped some how now I gotta wait till tomorrow to fix that and test

@3DRundown 11 ай бұрын

They always break. Gotta go metal

@joshbrewster42 Жыл бұрын

Followed all the instructions in your video (great explanation of everything by the way) and now have the BLTouch and leveling options available to me on my Ender 3 Pro but also have a really glitched out LCD screen. Any idea on what happened here? I confirmed I have a 4.2.2 board.

@3DRundown Жыл бұрын

Feels like something could be Shorting somewhere. I would turn it off, and check all the tiny little connectors at the board. Be sure they seated ok.

@3DRundown Жыл бұрын

Also. Stock firmware sucks. Go here: marlin.crc.id.au/

@MrLigerzero1 Жыл бұрын

@@3DRundown how do i put this onto my 3d printer....its giving me a hex file instead of a bin file

@danpo2008 3 ай бұрын

does this work similarly or the same on other printers that are similar to ender 3? in this case the voxelab aquila c2? as i cant find any tutorials for it

@3DRundown 3 ай бұрын

Hi, yes, this should work fine. I think a BL-TOUCH is more common on the Aquila, but, a CR-TOUCH and BL-TOUCH run off the same firmware. As long as you wire it up properly, you'll be good to go. Just be sure to use firmware that support BL-TOUCH. Again, that firmware will also support CR-TOUCH

@danpo2008 3 ай бұрын

@3DRundown hi thank you for the quick reply but after watching the video i wend and checked my motherboard and couldn't find a connector that i would connect it to

@3DRundown 3 ай бұрын

Bummer. Search that board on Google, to be sure. If anyones done it, there will be a Reddit thread on it, for sure

@danpo2008 3 ай бұрын

@@3DRundown how do i find out how its called?

@danpo2008 3 ай бұрын

@3DRundown hi again today ive tried to buy the a1 mini combo in the uk but i can only find 2 providers for it 1 obviously the official website and another one but both of them reject my payment and flags my order as "high risk" know anything i could do?

@villigance264 8 ай бұрын

I dont know what im doing to be compleatly honest. I dont know how a CR touch works and your printer has a compleatly different software to what i have. I saw the ender 3 pro software on a standard ender 3 printer so im not sure if I should upgrade the printer software to a pro or leave it as it is as i dont have the correct options for the CR touch

@3DRundown 8 ай бұрын

Which machine do you have? Consider my course. I walk you through everything. Https://www.3drundown.com

@villigance264 8 ай бұрын

@@3DRundown I got an ender 3

@woodsman9427 24 күн бұрын

is there away to disable the CR Touch after installing it? cause i took the G29 GCode and i put my switch back on but it is not homing properly

@3DRundown 24 күн бұрын

I wouldn't. There is no reason to remove the CR-Touch. You lose ABL, and more critical, you lose Z-Offset control. Keep the Touch. Also, don't use G29 You'd need to revert back to a non Touch Firmware.

@woodsman9427 24 күн бұрын

@@3DRundown what should I use for G29 then?

@3DRundown 23 күн бұрын

Nothing. Do a manual ABL and save. Only do it again, if needed. Use M420 S1, after G28

@3DRundown 23 күн бұрын

kzfaq.info/get/bejne/o7Gmptdn1tbPgKs.html

@deejay6983 11 ай бұрын

My screen got distorted after following everything. Is there a fix?

@3DRundown 11 ай бұрын

Did u resolve this

@Ziplock9000 6 ай бұрын

S did you ever do part 2?

@3DRundown 6 ай бұрын

Hi, I ended up not continueing the E3 PRO series of videos, due to time restraints, but, I DO have a part 2, using the Ender 3 MAX, which is identicle, only larger, follow that one: kzfaq.info/get/bejne/p8V9jLyLl83LcY0.htmlsi=M8M-72Hpl11oyACJ

@funnyboy1544 9 ай бұрын

So got it all installed on the card but the printer seems to not be updating. It just has its normal settings. Its the ender 3 not the pro.

@3DRundown 9 ай бұрын

Use a different card. 32gb or less, format fat32. Rename the firmware file to anything else

@funnyboy1544 9 ай бұрын

@@3DRundown I got it working. I ended up choosing a firmware for the ender 3 with BL touch instead of the ender 3 pro. Thank you!

@k0n836 Жыл бұрын

Thanks, but my printer doesn't store the settings.

@3DRundown Жыл бұрын

Of course it does. Which printer, which firmware, and what's your process

@chefspaghetti9198 Жыл бұрын

I need a little help i did all the steps and got to turning on my printer and the screen just stays blank what should i do

@3DRundown Жыл бұрын

Is this after doing the firmware? What happens if you unplug the touch?

@chefspaghetti9198 Жыл бұрын

@@3DRundown it was after i installed the cr touch and put the firmware in the root file then turned on my printer that it just stayed on a blue screen. and if i try to unplug the touch it still stays blank

@3DRundown Жыл бұрын

Feels like the firmware didn't take. Possibly wrong version? Make sure it's the BLTOUCH (or cr) firmware, and matches the Board version on your machine

@chefspaghetti9198 Жыл бұрын

@@3DRundown sorry i forgot to respond but yeah the firmware just wasn't working so i had to use vscode and make my own to flash but i have it working now

@wolfsquatch 5 ай бұрын

Why dont you need the z stop switch anymore?

@3DRundown 5 ай бұрын

Because Z Offset is now set in the firmware, using the CR-Touch.

@wolfsquatch 5 ай бұрын

@@3DRundown awesome that's what I was thinking but I wanted to make sure before I bought one, thank you!

@3DRundown 5 ай бұрын

This is a huge upgrade, as you can now make minute software adjustments, for that perfect Z-Height, rather than having to physically move a switch, which is archaic.

@alekhmarion 6 ай бұрын

4.2.2

@unfixinggaming4961 4 ай бұрын

Mine is red what do I do

@3DRundown 4 ай бұрын

Solid Red? Not working? Elaborate

@LPdeltaT 5 ай бұрын

I dont have that port

@3DRundown 5 ай бұрын

Yours maybe an ender 3, and not a pro? Or perhaps older model with older mainboard

@dparty4 5 ай бұрын

I did all of this and my screen won't turn on now 😔 idk what I did wrong

@3DRundown 5 ай бұрын

Likely the wrong firmware. Flashing back to stock should get the screen back on, then can try again. Be sure using BL TOUCH firmware, and for the right machine, and board.

@dparty4 5 ай бұрын

@@3DRundown I have the right one for the main board and it has a setting for the bl touch. But I don't have the stock firmware anymore. My main board is 4.2.7, will it be an issue if I go back to the stock firmware if I can find it? I upgraded my board yesterday

@jasongooden917 14 күн бұрын

mine says BL touch but not bed leveling

@3DRundown 14 күн бұрын

Elabortate?

@ethanpullaro7433 6 ай бұрын

Help!! My screen is blank its just blue, what do i do

@3DRundown 6 ай бұрын

Sounds like a potential wrong firmware. Use a Different card. 32gb or less. Format in fat32. Put the firmware on it. Machine OFF: Put the card in machine, turn machine on.

@ethanpullaro7433 6 ай бұрын

@@3DRundown its in fat32 and only has the file you put on. It still only shows blue. my file shows a windows explorer icon does that make a difference?

@3DRundown 6 ай бұрын

The icon shouldn't matter. However, the machine will not read the same file name more than once. So, try this: RENAME THE FILE. Any change. even just adding a #

@ethanpullaro7433 6 ай бұрын

@@3DRundown got the screen on but now it says no tf card

@Thawney Жыл бұрын

aww, Im gonna need to buy a 32 bit board lol

@3DRundown Жыл бұрын

Installed mine on the board it came with. Have you checked yours to be sure what it is?

@Thawney Жыл бұрын

@@3DRundown yeah I got my ender in like, 2018 when it was still a "groundbreaking new budget printer". Didn't even know they came with 32 bit boards I thought only the newer ones did! Mines 8 bit lol

@jasongooden917 16 күн бұрын

Too bad you can’t just attach the z stop to the nozzle head upside down

@3DRundown 16 күн бұрын

Z-Stops are junk

@aldoenslin4376 7 ай бұрын

Hi there everyone can someone help me with the files bcs I did everything he did except for me insted of the file that i need to copy there is a video of 6 seconds long, can someone please help me with that.

@3DRundown 7 ай бұрын

Not following. What file do you need?

@3DRundown 7 ай бұрын

The firmware is on Creality.com

@aldoenslin4376 7 ай бұрын

The file i need to drag to the card is a video instead of a file like with you

@aldoenslin4376 7 ай бұрын

@@3DRundownI did everything acording to you but when i got to the last step of transfering or copying the file to the SD card i saw that the file is a video

@3DRundown 7 ай бұрын

You are looking for a .BIN file.

@user-rk7yg8qs6o 6 ай бұрын

please help

@3DRundown 6 ай бұрын

Elaborate:

@lightning7527 3 күн бұрын

My dosent even start now

@ellabarker9346 3 күн бұрын

Did you make sure that u didn’t unplug anything from the motherboard when you put in the auto leveler?

@lightning7527 3 күн бұрын

Only the z stop the screen just lights up blue and nothing more

@3DRundown 3 күн бұрын

Likely the Firmware. Be sure to install an abl firmware properly

@ellabarker9346 3 күн бұрын

@@3DRundown oh btw tysm man this helped so much also it’s great to see someone who actually explains all the details in depth that must take forever but it helps so so so much you’re literally the only person I can find who actually does that and always gets a reliable angle tysm :)

@3DRundown 3 күн бұрын

OMG, it's incredibly tedious and time consuming. A video like this, takes me like 3 days of shooting and editing. I also hope it's worth it in the end... So, hearing things like this means allot to me. So does a "Super Thanks" 😜😜

@chacaman Жыл бұрын

Dude amazing, but clean your hands and nails...

@3DRundown Жыл бұрын

No thanks. I'm busy making piles of $$ painting for @greggadventure, so, I'd sooner stop shooting these Videos, than worry about paint on my hands. Which is fine by me. I don't need this channel. I make more in one day, on @GreggAdventure, than I make in a month on this channel.

@valp0gaming976 19 күн бұрын

you skammas nvr work

@3DRundown 19 күн бұрын

Douchebagsayswhat?

@3DRundown 19 күн бұрын

PS: My gaming channel has more views than yours. 3 Million. 😂😂🤣😂

@rossboyack7434 8 ай бұрын

STOP your video turned my printer into a brick now i have no software on iitand its a BULE SCREEN OF DEATH STOP your video turned my printer into a brick now i have no software on it and its a BULE SCREEN OF DEATH

@3DRundown 8 ай бұрын

Lol. You copy/paste your fake rant twice.

@user-rk7yg8qs6o 6 ай бұрын

I’m very nervous it changed everything into Chinese or Japanese I’m not to sure which and I don’t know how to remove the firmware but the light on the cr touch is purpleish color

@3DRundown 6 ай бұрын

possibly installed wrong language firmware? Should be able to change it back to english with a little poking around, if familiar where the settings usually are. Purple is ok

@user-rk7yg8qs6o 6 ай бұрын

@@3DRundown ok it’s better but like what does it even do it just touches the bed like 15 times and goes back to the middle of the bed I’m thinking about removing it if it doesn’t work

@3DRundown 6 ай бұрын

Sounds like it's working. I would watch my videos on how it works and how to use it