Install Guide for the 6.7L Powerstroke Pusher Race / Off-Road Intake System

Рет қаралды 222,568

4 жыл бұрын

WHAT YOU CAN EXPECT
Independently dyno tested and proven 150F EGT drop on stock turbo and stock fueled trucks; bigger gains can be expected with higher performance applications
0.5-1 MPG gains
Increased turbo spool
Tested & proven for compound turbo system level boost pressures
Note: This product is not emissions compliant and requires custom tuning. Off-road and race use only.
WHAT CUSTOMERS ARE SAYING
Supreme Diesel, in Jacksonville, FL is no stranger to Powerstroke upgrades. They worked with us on testing the product throughly prior to launch. Their comments - "Pusher Intakes meshed with our core beliefs from day one; fit, finish, and function. Being an innovator of our industry is no easy task, their new intake system for the 6.7L Powerstrokes has totally redefined what we have come to expect from this type of product. These kits not only leave very little to be desired as far as clearing fuel and spool times, but also keep the Pusher Standard high with quality parts and ease of installation. We can not wait to see what the future holds as we continue to push the limits with such and amazing company!"
FEATURES
- Replaces the entire anemic factory intake manifold, plastic cold side charge tube and cold air intake assembly
- The Pusher Intake Manifold delivers maximum and perfectly equalized air flow to each cylinder head
- Both the Pusher cold side charge tube and cold air intake are routed via the shortest most efficient flow path
- A TIG welded aluminum upper filter box utilizes the very effective factory lower filter box and ducting from the grill to create a true cold air intake. A tinted plexiglas window and the use of the factory filter minder allows you to monitor the condition of the air filter.
- The Pusher 45 CAL Air Filter utilizes the same materials and design as the 50 CAL filters tested and proven in all of the Pusher compound turbo systems
- The entire system is constructed around mandrel-bent steel tubing with CNC-machined sensor ports and flanges for an insanely rugged system designed and built to last the life of your truck
- Includes all new HD silicone connections, full stainless T-bolt clamps, gaskets, hardware, and a CCV reroute kit for a 100% complete bolt on install
- Fully TIG welded with precise settings to achieve optimum penetration without compromising air flow
- Tested for over two years with Pusher's North American dealer network to ensure this is the best intake system available
- Compatible with all of the soon to release Pusher turbo systems, 2015+ factory turbos and most fixed geometry turbo upgrades, please call us for the latest compatibility list
- Stocked in six powder coated color options for same business day shipping on most orders. - - - - Custom colors available, please contact us for a quote
Visit our website for more information.
pusherintakes.com/
2017-19 Ford 6.7L Powerstroke
pusherintakes.com/pusher-inta...

Пікірлер: 276

@zakbrown969 3 жыл бұрын

If only every mechanic was as gentle as this man 😂

@ThrottleOut250 4 жыл бұрын

Super clean kit. I got the AMDP kit, Canadian made local to me. I like the way this uses the air box a lot.

@sakoboomer2420 Жыл бұрын

Great video Bud! Very helpful. I am hoping to get mine installed today!

@252tippin Жыл бұрын

After watching this video I'm impressed how much nicer this kit is than others I've seen, with excellent video instructions . I'm going to the web site now to look for my year model 😁

@scottellis8964 2 жыл бұрын

The best tutorial video on a 6.7 I’ve ever watched ! My pusher kit will be here this week so thanks for the video 👊🏼💪🏻

@maj2995 2 жыл бұрын

Dude was it a bitch because im struugling

@volbster2 2 жыл бұрын

Very cool! You said "Makes it run so much better" Lets here it! Start it up!

@nabielsuleiman7039 2 жыл бұрын

Great video very informative very thorough and very clean cut easy to do

@phiberoptik192 2 жыл бұрын

OMG, I want to install this whole kit on my truck so bad.

@davidortiz1869 3 жыл бұрын

Awesome install video,... well done!!!

@pusherintakes 3 жыл бұрын

Thanks!

@logansalazar3651 2 жыл бұрын

Amazing just amazing I bought the mpd kit just like this and this kit comes with everything the mine didn’t so many details in consideration here with the gaskets to the manifold that’s huge and a bracket for the dip sticks that’s amazing

@pusherintakes Жыл бұрын

Appreciate you taking the time to note the differences for everyone reading

@motofish596 4 жыл бұрын

Cleans up the look of the engine and fixes the the cold side problem 👏🏽👏🏽👏🏽

@AlexanderDeppa 17 күн бұрын

Yeah I'm dealing with that right now on my 19. Gonna swap for something like this I think.

@Oheada 2 жыл бұрын

very clean look. bout to pull the trigger and order a 2022 F250, will be trading in my 2018 Ram 2500. Definitely will want this on the new truck.....very nice.....so nice....

@cameljockey10 Жыл бұрын

Great job man, GOD bless. thank you.

@KennyB9871 Жыл бұрын

Great video! 🙌🙌

@jonlebon7106 Жыл бұрын

When you install the upper intake with the bolts in the flange, to be careful not to drop the bolt accidentally I’d advise to put a piece of tape over the bolt to hold it place

@joesilvasr9733 Жыл бұрын

VERY nice system 👍

@TONYCARROLL-mm3lu Ай бұрын

love the bandaid ! im also a fellow aircraft mechanic, and former IA, self employed then and run a 95% Ford diesel shop her in east Tn, I figured a daughter had fixed your finger up lol im fixing to order a bunch of stuff from you for my '16 f350, and hope to get a good association started so i can pass on to my customers

@pusherintakes 28 күн бұрын

Awesome, shoot us an email at info @ pusherintakes.com and we can get you some distributor paperwork if you like what you see after you get your goodies for your F350.

@Abacogardens 4 жыл бұрын

Great Video! Makes me want to buy a New Ford!

@just_one_opinion 3 жыл бұрын

So I installed one this weekend, Watching this installation is a must, lots of good tips, also DEEP socket set and wobble connectors are a must., There are couple of things that stumped me like taking the crank breather and adding the dump in the wheel well. Unroll the rubber boot on crank breather tube where it is attached to the lower aluminum intake, there are 3x plastic clips you need to get out of a groove in order to pull it. Only issue I have is the fit on the tube from the 90deg boot from intercooler to ram horn manifold. It is not good on my 17 F350. Tube is too long and it stretches the boot more than it should. Finish looks really good under the hood. There is no extra turbo whistle, and it is only marginally louder than stock. I see no performance gain but I am only running 33 psi max (80 hp tow tune) versus the stock setup. This should be a good setup for high boost setups. If you have the cash I recommend this product.

@pusherintakes 2 жыл бұрын

Hey, thank you very much for both your thorough and honest review / feedback, as well as your participation in answer others questions as an existing owner of one of our systems. It's much appreciated. Some of your comments are worth chatting about - if you have the time, give us a call at 772.212.9290 and we'll go over them. Ask for Jacob or Elizabeth. Thanks!

@elimartin5105 Жыл бұрын

Do you have to have an egr delete to install this??

@spartanoverlanding300 Ай бұрын

Just got my set for my 18, now I just need to find the time to put them in…. Need a sick day from work I think…

@PowerStrokeTechTalkwARod 3 жыл бұрын

We need to get Powerstroke Tech Talk w/ARod's truck hooked up!!! What yall got for his 2020 application. We would like to do a review install. His subscribers would go bonkers

@georgehuerta1990 3 жыл бұрын

This may be a dumb question but what is the purpose of all this piping compared to the stock piping I’ve just purchased F350

@zach7086 3 жыл бұрын

@@georgehuerta1990 if you noticed his egr is somewhere in a landfill, he probably is also tuned with a “muffler delete”. When you are tuned like that if you dont have better piping for turbo, intercooler, and intake one of those pipes are bound to blow

@RhinoAg 3 жыл бұрын

Love your channel

@just_one_opinion 3 жыл бұрын

@@zach7086 which happens with more boost, you got it

@therealjosemirelesjr.5726 3 жыл бұрын

Wished I would had saw this kit before ordering gdp piping kit theirs don’t even come with the cac temp sensor port. And have clearance issues with after market fuel filters.

@Threedog1963 Жыл бұрын

Looks great! Do you need to have a custom tune afterwards?

@pusherintakes Жыл бұрын

Yes, this off-road / race system does require custom tuning. If you're looking for an on-road solution, check out this system, no tunes required: ➡️ kzfaq.info/get/bejne/h7GEoJyTtJamnGQ.html

@jasonschaeffer72 4 ай бұрын

Wouldn't it be beneficial to Ceramic coat the tubes like Headers to keep the intake air cooler. Just curious 🤔

@RobertKohut 3 жыл бұрын

Nice!!

@pusherintakes 3 жыл бұрын

Thanks!

@TrentsGarage 4 жыл бұрын

Looking at your kits on your website for the 2015-2016 6.7 and was wondering if you logo on the cold side pipe is a sticker?

@pusherintakes 4 жыл бұрын

Yes it is. We send two stickers with each purchase (one green, one chrome). Many of our customers take one and put it on the actual system, but it's up to the customer. We definitely like the look on the system, but we're a little biased. ;-)

@jeffautrey1409 5 ай бұрын

After you have removed all of the components, how much further would it be to replace the CP4 pump?

@jesuswong5932 2 жыл бұрын

Any tuning required for this installation kit ??

@glennbreaux4270 2 жыл бұрын

Will this work on a stock set up with no tunes and no deletes? Thinking about doing this set up on my 2011 F350 SRW

@plumbbuild6517 3 жыл бұрын

Does pusher plan to make one to fit 2021 F250 6.7 powerstroke, or do they already have them

@kalani1963 4 жыл бұрын

Great video, but where does the re-routed CCV hose go to? Where shitas it tie into? Just did the egr delete on a 2013 F350. I want to delete the intake plenum, both top and bottom as shown here. I have the Sinister cold air intake, do you sell an extension piece for that or do i have to bite the bullet and buy the longer 1pc intake. Thanks in advance.

@pusherintakes 4 жыл бұрын

This system is only compatible with aftermarket turbos (or a 2015+ turbo) on the 2011-14 trucks. If you had that, to answer the CCV question, the parts included in this kit would allow you to plumb to an external catch can or vent to atmosphere. The owner of the truck in the video choose to vent to atmosphere. If that doesn't make sense give us a call - 772.589.8385 - thanks!

@phillip5505 4 жыл бұрын

So on the subject of tuning, will this be compatible with my gpr delete tune thru ez lynk or would I need to dyno my truck? Seems like I wouldn't get much out of it without a specialized tune

@user-maxim_79 3 жыл бұрын

You won't notice any gains. No tuning needed! For $1600 you could buy real horse power.

@mikeyoung718 Жыл бұрын

will this work if batter has been moved to the back like it was in the 16?

@williamspelker9347 2 жыл бұрын

I need the part number for a 2013 F450 Lariat Crew Cab Dually 4x4 with EGR Cooler (Las Vegas) Sierra Gold Transport

@robertle9526 4 жыл бұрын

How much this kit cost? And a labor cost if you can do it for my F450 2017. Please advise. Great video. Thanks

@elizabethallenbaugh5223 4 жыл бұрын

Thanks Robert - the kit runs $1449 powder-coated and shipped (US). We don't do installs here at the factory, we recommend using your preferred local diesel shop. Let us know if you have any more questions, thanks!

@coldalaskan007 3 жыл бұрын

question, I am running an SB air intake and relocate kit, do you make these kits to work with that air intake? if not, what suggestions do you have so I don't have to swap my battery back to front of this air box, my air intake sits where the battery does in this picture

@pusherintakes 3 жыл бұрын

Hey, call us and we can discuss your options. 772.212.9290

@RA-gk5zg 4 жыл бұрын

Looks great. Do you have before and after dyno data?

@pusherintakes 4 жыл бұрын

Thanks! We don't have performance data yet (other than testimonial data) - it's something we're working on now. And while we appreciate a good dyno session as much as the next guy, we'll use a flow-bench to get the data, which will show exact airflow gains (versus a dyno which reflects the overall setup of the individual truck, not just our parts). In the meantime, here are some reviews from customer's who have already purchased - head over to our site to read more: "Great upgrade, very easy to install! Noticed slight improvement in fuel economy, maybe .5-1MPG. Also a noticeable increase in the turbo response and the best part it sounds awesome!" "Having installed almost every brand Ford 6.7L intake system there is on these trucks from 2011-2019 by far the best performing and all around intake system is Pusher Intakes. Not just the quality of the machining and craftsmanship, the precise fitment, and overall results are the. best. there. is! From lower EGTS, to better results from just ordinary driving or hooked up to a 40ft gooseneck loaded down for work, the Pusher Intakes Ford 6.7L intake system is by far the best on the market."

@user-maxim_79 3 жыл бұрын

Which means zero HP TQ gains noticed!

@just_one_opinion 3 жыл бұрын

@@user-maxim_79 Every tune and setup is different. This setup is better for over stock boost (shit plastic upper intake) and gets rid of crankcase oil and EGR filth going back in. Does that help you?

@jray9o 4 жыл бұрын

What are the torque specs for the bolts on the intake plenum?

@pusherintakes 4 жыл бұрын

8 ft-lb. We also recommend doing a hot re-torque to account for the powder coat softening during the first few heat cycles.

@gcolo98 3 жыл бұрын

I need to get one I broke 4 hose, that small hose nipple on the riser that comes from the heater core 14’ F350

@sqsproductions7192 3 жыл бұрын

I broke the same thing hahah. Removing the egr takes patience. As I learnt afterwards lol

@SparkysGarage 3 жыл бұрын

Filter is cleanable or do you replace it?

@pusherintakes 3 жыл бұрын

Fully cleanable 👍🏻We also sell a branded sock for those who want an extra level of protection.

@alwilliams32 2 жыл бұрын

What if I have an S&B intake with a battery relocation kit installed already?

@zak_daddy8456 Жыл бұрын

Not sure if you ever got your question answered but I’m planning on installing the 15-16 kit on my 18 and I’m leaving the S&B battery relocate tray in place so I can have the open style intake

@alwilliams32 Жыл бұрын

@@zak_daddy8456 Is there any modifications needed for that 15-16 kit to fit on your 18?

@statelinedieselperformance5077 11 ай бұрын

You will have to buy a factory battery box

@Lightning546 Жыл бұрын

I like the way this intake system looks, just wish it was available in yellow.

@pusherintakes 11 ай бұрын

Thanks! We do offer it in bare metal (natural finish) for anyone who wants a custom color done by a powder coater local to them.

@Lightning546 11 ай бұрын

@@pusherintakes: Thanks, the red is very close to the color of my truck (Race Red). Your intake system is now on the upgrade list after a couple of more Banks toys go on the truck.

@brendaehrhard9038 2 жыл бұрын

As your cold air intake filter is it dry or wet ? Which one be better ? And cost for extra one ? I have 2019 F350.

@pusherintakes Жыл бұрын

Our filters are made with media that can be oiled, but they are not pre-oiled. We don’t recommend oiling unless you are in a very dusty environment and need the regular extra support of the oil to catch the really fine particles. (If you do oil, make sure to use a cleaning and oil kit from a reputable brand, and take care to follow application instructions carefully to prevent over-oiling.) Replacement filters are $78.50.

@traxxi2003 2 жыл бұрын

Love the looks of this kit but I’m curious to know if other than the cool looks are there any performance benefits to have on a otherwise factory emissions equipped truck?

@just_one_opinion 2 жыл бұрын

It wont clear your stock factory emmssions equiped truck. Are you trolling?

@jonlebon7106 Жыл бұрын

@@just_one_opinion why would that be trolling? It’s a legit question

@rayc5255 Жыл бұрын

10 months later also interested if there are any performance gains

@vincentgonzales3312 11 ай бұрын

@@rayc5255you do know you can just search up a video on it right u BOZO🤡🤡🤡

@TONYCARROLL-mm3lu Ай бұрын

BTW was it a safety wire tail or an angle cut zip tie that cut ya ? the old Pipers were tied with a string like material best i remember that was before zip ties tho

@pusherintakes 28 күн бұрын

Can't remember this specific day, but it seems every part of the stock Powerstroke is out to get you sometimes.

@billymann5325 4 жыл бұрын

What exactly is every part in this video that you installed so that I can order everything you installed for my 2015 F-350 powerstroke

@pusherintakes 4 жыл бұрын

Sorry for the slow reply - missed some KZfaq notifications. This video covers the Intake System (www.pusherintakes.com/Pusher-Intake-System-2015-16-Ford-6-7L-Powerstroke-p/pfp1516is.htm) and the Hot Side (www.pusherintakes.com/Pusher-Charge-Tube-for-2015-Ford-6-7L-Powerstroke-p/pfp15xxhp.htm) - Call us with any questions - 772.589.8385

@billymann5325 4 жыл бұрын

What kind of HP gain should you expect?...wondering if it's worth purchasing for the $$$

@pusherintakes 4 жыл бұрын

HP gains vary so much from individual trucks (due to varying configurations) so we hesitate to give specific numbers, but everyone can count on a proven 150F EGT drop on stock turbo and stock fueled trucks; bigger gains can be expected with higher performance applications + 0.5-1 MPG gains + increased turbo spool. This system also has been tested and proven to handle compound turbo system level boost pressures.

@dannyrbailey 3 жыл бұрын

Do you guys offer a kit like this if I have my battery relocated to where the intake is and the intake to where the battery is?

@pusherintakes 3 жыл бұрын

We don't at this time, unfortunately.

@mxm3904 2 жыл бұрын

Get a SPE kit, lets you use any intake you want

@500sandwmag 2 жыл бұрын

What is the best way to take care of the air cleaner when it needs to be maintained?

@pusherintakes Жыл бұрын

Here's a quick write up on how we recommend cleaning our Pusher CAL air filters: pusherintakes.com/articles/how-to-clean-your-pusher-404550cal-air-filter/

@armandomaldonado1559 6 ай бұрын

What is the cost on all this? I think it's a good system.

@steveholloway8576 3 жыл бұрын

I have a 2015 6.7 COMPLETELY STOCK , would I need a tuner or tunes to run this setup?

@just_one_opinion 2 жыл бұрын

yes

@jonlebon7106 Жыл бұрын

Very interested in this for my 22, I know it breathes better but when it comes to HP and torque what’s an estimated gain over stock, I have no tunes, it’s all emission controlled

@pusherintakes Жыл бұрын

Check out our new product drop of an emissions compatible intake system that'll work on your 22 - 66% airflow increase on the manifold, 15% on the turbo inlet. ➡️ kzfaq.info/get/bejne/h7GEoJyTtJamnGQ.html

@jonlebon7106 Жыл бұрын

@@pusherintakes man this is awesome! No tune required? It seems all the emissions will stay in tact. If so I’m ordering today!

@pusherintakes Жыл бұрын

@@jonlebon7106 Not this one, this is our race system. Follow this link for our emissions compliant intake system - kzfaq.info/get/bejne/h7GEoJyTtJamnGQ.html

@WildTines 3 жыл бұрын

Do I need to be tuned? And gone through the coveted weight loss program for this setup?

@ismaelmarquez9434 3 жыл бұрын

Yep

@just_one_opinion 3 жыл бұрын

You saw the EGR cooler gone right? That said....those damned inside snappy bolts UGH!

@gregd8038 3 жыл бұрын

What about the crank case vent tube. Where did you install it?

@pusherintakes 3 жыл бұрын

Hi Greg, our system comes with a complete CCV reroute. If you want to learn more about how it's installed, give us a shout at 772.212.9290. Thanks!

@tamischifflinrealtortami334 Жыл бұрын

Question for you, how does this system work it appears you delete the throttle plate assembly and actuator with the lower intake so do you now control the throttle actuation without this?

@pusherintakes 10 ай бұрын

Those functions are all electronically controlled in these trucks. The throttle valves are just part of the emissions system; for these race systems they are no longer needed.

@enkilugal3282 2 жыл бұрын

What is available for the 2022 F-250 6.7L Powerstroke? fuel system, air supply, turbo system, etc...

@pusherintakes Жыл бұрын

Hi Enki, check our latest product drop that expands our offering for the 2022 Powerstrokes here - kzfaq.info/get/bejne/h7GEoJyTtJamnGQ.html

@FlerdaMan Жыл бұрын

do you guys have a non emissions version of this system for the new 2022s? I checked your website and only found the 17-19 version and if not will the 17-19 work on a 2022 powerstroke

@pusherintakes Жыл бұрын

Our Race version for the 2020+ isn't out quite yet, but will be this year.

@frankgianotti5413 4 жыл бұрын

Do you sell that CCV kit separately?

@pusherintakes 4 жыл бұрын

We don't have it listed on the site separately yet, but if you give us a call we can answer any questions and complete a phone order. 772.589.8385

@riffelsrifles2981 3 ай бұрын

Just installed the pusher intake kit on my 2016 F350 6.7 powerstroke and now my MAF AND THROTTLE is reading 0 yes zero even when driving. Creating DTC CODE P00BD. How can I correct this????? Thank you for your help and time.

@pusherintakes 3 ай бұрын

The first step if you have this issue is to check that the MAF is installed the correct direction and plugged in properly. Please verify this and shoot us an email or call if you need further assistance and we will help you work through it.

@krisreid6647 2 жыл бұрын

I'm confused, you removed the throttle body but didn't reinstall it. What am I missing?

@pusherintakes Жыл бұрын

Since this is a race system that requires a tune that no longer utilizes the throttle body it's not reinstalled. To look at our on-road option that does use the throttle body check this one out: kzfaq.info/get/bejne/h7GEoJyTtJamnGQ.html

@jandblawncare8570 Жыл бұрын

Is this kit available for a 22 F450 w/6.7L? I didnt see anything on your site, thanks

@pusherintakes Жыл бұрын

Not yet, for the 2020+ we currently have replacements for both the hot and cold side charge tubes; but....full intake system coming soon. 😎

@cjchico 2 жыл бұрын

Can I use my S&B Intake box + filter with this kit instead of the open filter?

@someguy4476 Ай бұрын

Nope. You have to get a different part from the jack ass’ over at SPE.

@acelaserandcncjpm8510 3 жыл бұрын

Why don't you guys start the truck after??

@mex700g8 4 жыл бұрын

What does all these up grades do to the life span of the turbo and engine.

@pusherintakes 4 жыл бұрын

These upgrades make the truck more efficient, it runs cooler, etc - definitely improves the longevity of the turbo and engine.

@matthewkadey9063 3 жыл бұрын

How do you install the air filter if you do not have a stock air box?

@pusherintakes 3 жыл бұрын

Depends on your model year and aftermarket box - what do you have? You can give us a call at 772.212.9290 for faster replies, thanks!

@brendaehrhard9038 Жыл бұрын

Question , How long does it take to remove the factory system out ? No video's say...

@pusherintakes Жыл бұрын

It's definitely the hardest part of the process, takes about twice as long as the install itself. Depending on experience, it's typically about 3 hours. Jacob (in the video) can do it in one hour, but he's been pulling these 6.7L systems apart on a regular basis for several years. (Also keep in mind these systems are for race vehicles that have already been modified for race use, so if your truck is stock you have some work to do prior to beginning the installation of our this system.)

@user-gg9qi4mz5b 6 ай бұрын

I have a 2019 F-250 that's been deleted. What would need to be done once the throttle valve is taken off?

@pusherintakes 6 ай бұрын

For off-road trucks that are tuned like yours, the throttle valve has been rendered inactive by the tune. Nothing additional is required when you add our race system. (The throttle valve is not the same thing as a throttle body, although they are commonly confused; the throttle valve on these trucks are strictly an emissions system tool).

@diamondgtransport5181 3 жыл бұрын

We keep breaking clamps. I tell them they have the wrong clamps cz they are wire clamps. Whats do you think?

@pusherintakes 3 жыл бұрын

I'm not sure what you're referring to - please call us if you are inquiring about our products specifically - 772.212.9290

@MrBowhunter24 3 жыл бұрын

Can you send me the link so I can get this for my 2018 f250. Also do I need a tuner for this or does this use all factory sensors. Thankyou

@pusherintakes 3 жыл бұрын

Link: www.pusherintakes.com/Pusher-Intake-System-2017-19-Ford-6-7L-Powerstroke-p/pfp1719is.htm

@pusherintakes 3 жыл бұрын

This product is not emissions compliant and is for off-road use only. It would need a tune. Call us with any further questions, thanks! 877.967.5652

@showynnakdazz 4 жыл бұрын

Will this work with a sandb cold air intake box?

@pusherintakes 4 жыл бұрын

Not if it's a model where the battery / cold air intake box has been swapped.

@NicManGun 3 жыл бұрын

what about those who have a different intake like the S7B intake where it moved the battery?

@pusherintakes 3 жыл бұрын

They unfortunately aren't compatible. Right now we recommend putting the stock box and tray back in with our system and selling the S&B to recoup some of your money. The factory lower box and ducting work great.

@mxm3904 2 жыл бұрын

Get an SPE kti

@COMNAY100 3 жыл бұрын

Will this be compatible with the KC Turbo stage 2 whistler?

@pusherintakes 3 жыл бұрын

As long as they kept the external geometry of the turbo the same as factory (which it looks like they did) you should be good.

@Kram2462 4 жыл бұрын

Will this still work on a truck that doesn’t have the egr removed?

@pusherintakes 4 жыл бұрын

Not it will not. This product is not emissions compliant and requires custom tuning. It is for off-road use only.

@Poor_ManTruck 3 жыл бұрын

@@pusherintakes "offroad"

@dustinbeers7514 3 жыл бұрын

Are you guys planning on a emissions compliant version that are compatible with the EGR still in place?

@dudestuff1557 4 жыл бұрын

I wish he would’ve started it to hear the difference in the sound it makes. Does the turbo whistle become louder with this!

@motovid3865 4 жыл бұрын

He cant it has special upgrades

@ronniesorters8200 4 жыл бұрын

You do good clean work Bro... and you have patients... you do good work... where are you located and do you have parts in stock... I have the same truck you're working on .

@laboredm 5 ай бұрын

This is a race and off road change. Would this be good for if you were just hauling a camper around and want more power and better gas mileage.

@pusherintakes 5 ай бұрын

If your truck is emissions intact and you're looking for the benefits of this system while keeping your truck intact, our Powerflow Intake System flows the same and is emissions compliant, CARB certified. You can learn about it here: kzfaq.info/get/bejne/h7GEoJyTtJamnGQ.html

@rickketchumn4458 3 жыл бұрын

On the 2016 ford power stroke does the filter go it the air box to

@pusherintakes 3 жыл бұрын

Hey Rick, the factory air box doesn't have room for a conical filter the size of ours, so we designed it to be open.

@Chris72401 4 жыл бұрын

What does this do for EGT's? Anything?

@pusherintakes 4 жыл бұрын

Sorry for the mega-slow reply: This system has been independently dyno tested and proven to give a 150F EGT drop on stock turbo and stock fueled trucks; bigger gains can be expected with higher performance applications.

@DieselQ Жыл бұрын

stupid question but i dont understand how does it run without intake valve

@pusherintakes 10 ай бұрын

If you're asking about the throttle valve - that piece of equipment is strictly for the emissions system, which isn't utilized in this race / off-road system. Since it's not being used we remove it. The actually throttle system is all electronically controlled and not linked to the throttle valve.

@nabielsuleiman7039 2 жыл бұрын

When you did the CCV downplay it why did you leave the filter on why didn’t you do that delete and remove the filter does it matter if the filter is on there does the crane case still breathe with that filter on it even though you did the bypass

@pusherintakes 2 жыл бұрын

The factory filter is operational with our system, it's needed to help filter out the oil in the crankcase air.

@nabielsuleiman7039 2 жыл бұрын

If it’s operational like you say I understand but why do they have those SPE he deletes where you have to remove it and run the hose drain down and they have that also other piece that is like a metal filter type of thing because I was told to delete the whole thing and let the drain hose down with a valve on top of the parts under the filter CCV filter

@randallrojas3586 4 жыл бұрын

Hey I'm planning to buy a 2014 6.7 can u send me a link of wish kit do you recommend me to buy also I'll like those pipes and a different color can you do that or I have to paint that with the color I want thank you

@pusherintakes 4 жыл бұрын

We offer six different powder coat colors - you can see them here. www.pusherintakes.com/Pusher-Intake-System-for-6-7L-Powerstroke-in-2011-p/pfp1114is.htm This kit is a good place to start, call us if you want details. We'd need to know more about your goals for the truck in order to provide suggestions. 772.589.8385

@johnkimball2268 4 жыл бұрын

What is the inner diameter of your intake pipe?

@pusherintakes 4 жыл бұрын

2.87, apologies for the slow reply. Let us know if you have any further questions!

@Sum0BBQ 4 жыл бұрын

Will this fit the 2020s?

@pusherintakes 4 жыл бұрын

No, there are similarities but the 2020s filter was moved which prevents this from being a bolt-on system for them.

@Dammotorsports 2 жыл бұрын

Do you have anything like that for the 2020s

@pusherintakes 2 жыл бұрын

So far only up to the 19s

@elimartin5105 Жыл бұрын

Do you have to have anEGR delete before you can add this kit.

@pusherintakes Жыл бұрын

Yes, this is our race configuration. If you're looking for an EGR compatible system, check out ➡️ kzfaq.info/get/bejne/h7GEoJyTtJamnGQ.html

@rigo112t 4 жыл бұрын

Does it fit to the stock turbo I got it deleted already

@pusherintakes 4 жыл бұрын

Our system is compatible with all 2015+ factory turbos and most fixed geometry turbo upgrades for the 2011-14s. If you have an 11-14, please call us for the latest compatibility list.

@n54nation 2 жыл бұрын

Is it possible to get just the coldside setup?

@pusherintakes 2 жыл бұрын

Cold side intercooler tube, or cold air intake? Yes on the first, not at this time on the second.

@NycCitizen Жыл бұрын

Will this work on a stock 6.7 or does it require a deleted vehicle?

@pusherintakes Жыл бұрын

This is our race intake system, and it is for off-road vehicles only. If you're interested in an intake system that works on stock trucks, check out our Pusher Powerflow Intake System here: kzfaq.info/get/bejne/h7GEoJyTtJamnGQ.html

@danepedregon 11 ай бұрын

Do the bolts need blue lock tight

@pusherintakes 10 ай бұрын

We recommend teflon tape with the ⅛" NPT port plugs.

@tonyg4546 2 жыл бұрын

Are there any performance gains? Gas mileage gains? I am strongly thinking about buying your complete kit for my 2019 super duty.

@pusherintakes 2 жыл бұрын

Hi Tony, apologies for the slow reply. This system has an independently dyno tested and proven 150F EGT drop on stock turbo and stock fueled trucks; you'll see even bigger gains with higher performance applications. On mileage our customers are averaging 0.5-1 mpg improvement. You'll also have a noticeably increased turbo-spool. And since you have a 19, if you choose to one day really set your truck up with our compound system, this system will work perfectly with it, as it was designed specifically for compound turbo system level boost pressures. Give us a call with any more questions! 772-212-9290

@patriot1636 4 жыл бұрын

Is a tune required to use this kit or can you run this kit with the stock tune as a bolt on and go kit?

@pusherintakes 4 жыл бұрын

This product is not emissions compliant and requires custom tuning. It is intended for off-road and race use only.

@floutdoorstv7914 3 жыл бұрын

does this void warranty? my truck has less than 500 miles on it and already want to start swapping things in

@just_one_opinion 3 жыл бұрын

Did you know that unless it is proven that aftermarket part caused a failure warranty must be upheld. Hope this answers your question.

@floutdoorstv7914 3 жыл бұрын

@@just_one_opinion I heard of that, im in florida and theirs a law tht states that the dealer also cant turn down warranties because i do all my own services. The finance manager tried to sell me on a maintenance package stating that if i do my own oil changes it voids the warranty. First thing i wanna do is intake and eventually delete it but ive hear that if i tune it the dealership will know even if stock tune is installed for warranty repairs.

@just_one_opinion 2 жыл бұрын

@@floutdoorstv7914 Any dealer can turn you down, for any reason. that is true.

@bigjim11566 3 жыл бұрын

Like how cleans up engine bay, but is this a you must be deleted to use?

@pusherintakes 3 жыл бұрын

This is an off-road use only system; it's not emissions compliant.

@teambeforeself6839 4 жыл бұрын

What about relocating battery

@pusherintakes 4 жыл бұрын

In our testing, we found relocating the battery is unnecessary for single turbo trucks. The lower factory box and ducting to it are more than adequate for a single turbo truck.

@PowerStrokeTechTalkwARod 3 жыл бұрын

Sounds like i need 2 do a review of your products on my channel!! What yall got 4 my 2020!?!!? Email or DM me!!

@pusherintakes 3 жыл бұрын

We don't have anything for the 2020s yet - they changed just enough that we'll need to re-work the majority of our components on this system. Stay tuned though - 🤙🏽

@williamsantiago7303 29 күн бұрын

I just saw a video where a customer was complaining how this kit doesn't fit like it suppose to and he showed several Chinese parts in this kit. I was considering this kit, but after what I saw, I'm not dealing with that. I'm tired of forking over my dollar too China.

@pusherintakes 28 күн бұрын

Our steel is USA steel, our designs are USA, our production is USA, our stainless t-bolt clamps are USA. Our silicone couplers are made in Mexico, and they are super heavy duty / commercial grade and we have no problemo with supporting our neighboring country. Our machined parts are USA steel and aluminum, from USA suppliers. If the video you watched had a complaint, siting the cause as "made in China" would not be the origin of the cause. If you'd like our response to the video, just send us the link so we can let you know our thoughts on when / how that install went wrong.

@Dieselnm101 4 жыл бұрын

What is egr plate is that?

@pusherintakes 4 жыл бұрын

That was an unbranded system that was previously installed on the truck by the customer. We do not sell EGR equipment.

@Lord-Snowflake 7 ай бұрын

Your customer is so worried about air flow, but didn't relocate the second battery,,, interesting

@troy9616 Жыл бұрын

Will this kit work with stock 2014 turbo?

@pusherintakes Жыл бұрын

No, at this time we don't have any intake manifold that works with the stock 11-14 turbo. We do offer hot and cold side charge tubes that are compatible.