Bambu Studio | Adding and Removing Custom Supports

Рет қаралды 10,987

Күн бұрын

Hi everyone, it's Chris here from It's Mead Made! In this video, I'm diving deep into the world of 3D printing supports with Bamboo Studio. Are you struggling with too many supports or too few, causing your prints to fail? Then this video is perfect for you. I'll guide you through painting on supports, optimizing model orientation to use fewer supports, and the best techniques for removing them. I’m also thrilled to share that we’ve hit 50,000 subscribers-thank you for being part of this amazing journey! Whether you're new to 3D printing or looking to refine your skills, join me for valuable tips and tricks to enhance your printing efficiency and save on filament. Let’s get started and make your 3D printing smoother and more successful!
Get Your Bambu Printer & Parts Here:
shareasale.com/r.cfm?b=228215...
(Affiliate Link helps the channel and costs you nothing)
JOIN THE FREE KZfaq COMMUNITY DISCORD
🔴 / discord
JOIN MY PATREON HERE:
🔴 / itsmeadmade
00:00:00 - Introduction:
00:00:44 - Celebrating 50,000 subscribers.
00:01:35 - Importance of model orientation.
00:02:19 - Demonstrating orientation effects with models.
00:03:36 - Bamboo Studio tutorial for support optimization.
00:08:34 - Additional examples of support manipulation.
00:12:37 - Thank You!
00:13:00 - Strategic support placement discussion.
00:15:08 - Manual support painting in Bamboo Studio.
00:18:56 - Further support adjustments and settings.
00:24:22 - Introduction to section view for support detection.
00:27:10 - Closing

Пікірлер: 34

@PeterAgostiniJdcap26 3 ай бұрын

🎉 congratulations Chris your one of the go to people on this stuff 😎👍

@Borgdrone0001 3 ай бұрын

Omg! I just realized I've watched all your videos, but forgot to subscribe! Ive learned so much from you. Thank you good sir!!

@ItsMeaDMaDe 3 ай бұрын

That’s awesome thanks for the sub and the support!

@davidzizza 2 ай бұрын

One thing I think needs addressing in your excellent presentation, and that it the "Auto-Orient" function found on the left side of the control strip. It may solve many of the questions surrounding the best orientation for each item on the bed or minimally be easier for newbies to manage. It would be interesting to do a comparison and see how it stands up to manual orientations.

@Darkbirdy Ай бұрын

As a new Bambu user (P1S) who is fairly new to 3D printing in general, these videos have been absolutely invaluable in learning the software and how to work with it. I've watched each on the TV with OneNote open on my laptop, taking extensive notes. One thing I hope you'll cover in the next video: Infill. Bambu has a huge number of infill options, and I know that some are better for speed, others for strength, but which ones and when has been really tough to figure out. A video similar to your support options video would be an excellent addition to this series.

@robmcdonald6808 3 ай бұрын

50,000?!??! That’s awesome congratulations sir you deserve it 👍🏻🎉🎉🎉

@SaiLentKnight 3 ай бұрын

Great tips delivered clearly! 🙌

@aberodriguez4149 3 ай бұрын

Congrats Sir !!! 👍

@BhavashJ 3 ай бұрын

Congrats on 50K subs! Thank you for this vast knowledge you've provided.

@brent_the_programmer9108 3 ай бұрын

This is the video I've been waiting for. Thank you!

@madmedic466 23 күн бұрын

Thanks for all the info. Your videos are super helpful!!!

@steve30b 3 ай бұрын

fantastic video. thankyou chris..

@AsdasdAsdasd-xq1nr 2 ай бұрын

Very good and on-hands conclusive help.. thanks❤

@homemovies751 20 күн бұрын

Just excellent! I bought a dozen STLs (that I think was positioned for a resin printer? - I have a Bambu X1C) and the "native" positioning seemed very odd and some of my prints were awful. Your tips help a lot (although some STLs will still need a lot of delicate prep work.).

@jendrarambharos4379 3 ай бұрын

Congratulations! You're my favorite 3d printing how-to channel! Also, not sure if something changed in your audio gear, but your audio sounded more boomy and had some harshness with a tight echo, like sound was bouncing off of hard walls. Your previous video audio sounded much cleaner. Either way, great vid and congrats again!

@ItsMeaDMaDe 3 ай бұрын

Thanks!! Yeah my regular mic broke and I was using something else. Trying to get it back to what it was for the next vid.

@MWE-693 2 ай бұрын

Awesome Playlist, please keep them coming on Bambu Studio. Add another subscriber & multiple👍's!

@ItsMeaDMaDe 2 ай бұрын

Thank you! Will do!

@goatelope7539 Ай бұрын

Thank you for all of your support

@ItsMeaDMaDe Ай бұрын

Your welcome!

@Bornmong 2 ай бұрын

Thank you

@dmsmoke261 Ай бұрын

Thank you for the instruction. It has been a valuable way for me to learn to use the Bambu Lab 3d printer and slicer. Is there a way to customize the BRIM? I am trying to print a model where only one small area 2-3 mm is not adhering to the print bed. The small area repeatedly "breaks" off from the bed and model, but the rest of the model adheres well.

@Red_Rubber_Duck 3 ай бұрын

I cut my hand open removing supports this morning. Release that new video asap dooood

@ItsMeaDMaDe 3 ай бұрын

Oh man I’m sorry to hear that one tip to help now is get a pair of cut resistant gloves and wear them when removing supports.

@Red_Rubber_Duck 3 ай бұрын

@@ItsMeaDMaDe would a padded helmet help me as well?

@PeterAgostiniJdcap26 3 ай бұрын

Use pliers straight and bent only

@pridedyanky Ай бұрын

Also could be different just between the 1p and 1s and the orientation of the cooling onto the print.

@gordonrain7152 2 ай бұрын

Great video...@ timestamp 17:10 how would I accomplish rotating the object whilst the object is showing the suggested support points in red? I've tried it under support 'painting' but the rotate function is disabled....again, great video.

@PeterAgostiniJdcap26 3 ай бұрын

How do you use the puzzle icon in bambu studio? Ty Chris