John Deere 7000 Planter Row Marker Hydraulic Cylinder Repair

Рет қаралды 12,157

Stinson Farms

3 жыл бұрын

Rebuilding the row marker cylinder on a John Deere 7000 planter. What all is involved?

Пікірлер: 26

@markymark9197 Ай бұрын

Nice and helpful video! Thank you! Nice truck btw

@crslyrn 3 жыл бұрын

Nice work on the marker repair. Thanks for taking the time to give us an idea of how to make that repair. Take care.

@stinsonfarms6724 3 жыл бұрын

Thanks for watching. I sure appreciate it.

@isaiahshaffer Жыл бұрын

Thanks! Our local hydraulic shop said the cylinder was welded together and not repairable, it felt good to see how it came apart and take it back and say “here put some seals in it” 😂

@stinsonfarms6724 Жыл бұрын

Glad I could help!! When I made this repair, I was just kind of figuring it out as I went. Way simpler that I expected. Good luck getting yours repaired!

@TheRobertralph 2 жыл бұрын

Thank you for making this video. I have issues with my row markers. I have the manual. But, this makes it wayyyy easier to understand.

@stinsonfarms6724 2 жыл бұрын

Glad it helped. When I started taking it apart I really didn't know what I would get into. Kinda learn as you go. Thanks for watching!!

@TheRobertralph 2 жыл бұрын

@@stinsonfarms6724 I just finished my rebuild. I sanded off the rust and old paint and re-painted it, too. Nobody is going to see it but I enjoyed doing this. Thanks for the help.

@stinsonfarms6724 2 жыл бұрын

@@TheRobertralph I would like to paint mine. I just bought new tires for it. Glad the video was helpful. Thanks so much for supporting the channel!!

@gleanerk 3 жыл бұрын

I’m glad you got it fixed . Hope you’ll speak to the rain to come here

@stinsonfarms6724 3 жыл бұрын

Thanks. Chance of rain again today. I'll do what I can to send it your way. Thanks for watching.

@joebullock9724 2 жыл бұрын

Thank you for the video. I have to take mine apart tomorrow because 1 of my markers dropped and won't come up.

@stinsonfarms6724 2 жыл бұрын

Hope it was helpful. That was my first time working on the markers. Had to learn as I went. Not as bad as I expected. Thanks for watching!!

@TAHDAHFarm 3 жыл бұрын

Looks good. Check on the operation of the markers. Before is separated the lift from the marker, the markers would raise up 1st then the planter would come up. Mine also weighs a lot more being 6 rows and the tanks for fertilizer. It you have 2 remotes, it is not hard to separated and It makes it nice to be able to have the markers up at times.

@stinsonfarms6724 3 жыл бұрын

Thanks. I had thought about the 2 remote idea. Both tractors have 2 so that is an option. I was a little surprised the markers are so slow about coming up. But I am happy they at least work.

@davidchristensen9960 16 күн бұрын

how did you get the hydraulic line out?

@TheRobertralph 2 жыл бұрын

6:36 How did you overcome the little piece that was holding it in? Did you have to push it aside?

@stinsonfarms6724 2 жыл бұрын

There is enough room for it to slide by and come out. You have to make sure the block that way hanging is centered in the bracket. It should have enough play in it to slide over a little if it catches on the mounting block. Thank You!

@johnwebb7167 Жыл бұрын

Just the video I needed to see! Do you know how long the long cable for the marker is supposed to be? I am having to redo my cables due to ripping off one of my markers.

@stinsonfarms6724 Жыл бұрын

Sorry, I don't know how long the cables are. Glad it helped. I was just figuring things out as I went. Thanks for watching!!

@brianrounds9824 3 жыл бұрын

I found a similar leak in mine this week, but coming from the steel line in the frame. Unfortunately, I can't get a replacement part quickly. I don't use the markers, so I was thinking about capping the hydraulic line that comes off the main cylinder (which raises and lowers the planter) and goes into the frame. Do you think that would cause any issues?

@stinsonfarms6724 3 жыл бұрын

Sorry just now seeing this. I don't think clamping the line would cause any issues at all. I was thinking of doing the same thing if it was something I couldn't fix quickly and just not use the markers. Thanks for watching!!

@brianlengel Жыл бұрын

Some guys tilt their marker disks inward, but yours are outward. Do you know if it makes a difference?

@stinsonfarms6724 Жыл бұрын

Mine work great like they are. I don't know how they would work tilted the other way. Thanks for watching!!

@jonathanmunguia1887 Жыл бұрын

a question the planter P7000 sows sorghum I would appreciate your answer

@stinsonfarms6724 Жыл бұрын

I do not plant Sorghum with the 7000. I don't have the right meters for sorghum. I have a plate type planter that I plant sorghum with. The meters I have with the 7000 would plant way too heavy. Thanks!