Junkyard Built 110cc Shifter Mini Bike Gets Finished + SENT!

Рет қаралды 125,532

2 жыл бұрын

Our Scat Cat custom 110cc pit bike powered mini bike gets finished up in today's episode of CarsandCameras, and we send it around the CarsandCameras Grand Prix! We change the gearing for more top speed, giving us a top end of around 34 MPH, we install a rear brake, and more. This Scat Cat vintage mini bike has awesome looks, and it rides great too!
Thanks for Watching!
Facebook: goo.gl/VR6mh2
Instagram: bit.ly/3T8njaF
----------------Go Power Sports Parts Used in Today’s Video---------------
Tell them CarsandCameras sent you at checkout:
Mega Moto mini bike rolling chassis kit: bit.ly/3c2XGBs
212cc swap on Mega Moto: • FAST Mini Bike Engine ...
228cc swap on Mega Moto: • 23HP Flat Tracker Mini...
Go Power Sports: bit.ly/3QKyODE
Get $100 off any Langmuir Systems Crossfire CNC plasma table using this link, or use code CARSANDCAMERAS at checkout: store.langmuirsystems.com/disc...
Join the CarsandCameras Pit Crew: / @carsandcameras
Subscribe to our PODCAST channel: / @atthewheelwithcarsand...
NEW MERCH: www.cars-cameras.com/
Equipment we use: www.amazon.com/shop/carsandca...
The following video features activities performed in controlled environments by knowledgeable persons. DO NOT attempt to duplicate, re-create, or perform the same or similar activities at home, as personal injury or property damage may result. CARS AND CAMERAS, the persons shown in this video and ANY CONTRIBUTOR, ARE NOT LIABLE FOR ANY such injury or damage. ALL CARSANDCAMERAS CONTENT IS FOR ENTERTAINMENT PURPOSES ONLY.
Cars and Cameras makes no representation about the sufficiency of any safety precautions and equipment used in this video.

Пікірлер: 398

@Adventure_Van_Upgrades 2 жыл бұрын

"some days your the windshield ........and some days your the bug" could be charles's new sticker design :)

@chrisgenovese8188 2 жыл бұрын

Charles always has nuggets of sticker quotes!

@memorris2 2 жыл бұрын

Im ready for the t-shirt!!!!! Charles quotes for the win hahaha

@sonny1721 2 жыл бұрын

I’d buy it

@southernredneck2428 2 жыл бұрын

“Some days your the windshield, and some days your the bug” Charles is hilarious 😂

@Hitycooking 2 жыл бұрын

kzfaq.info/get/bejne/adBkfLKavauddYk.html

@dukiemoto8676 2 жыл бұрын

Charles says “ I can’t work in these conditions” 😂 you guys are the best!👍

@No1karez 2 жыл бұрын

Charles buddy, you really make cars and Cameras just that much cooler and you're like Ike and John's little brother. I tell ya I get a little worried when I see either of you boys on those sketchy little bikes so please all of y'all stay safe!! Also big congratulations on a great event at mini mayhem, I can never get enough of those mayhem vids

@TheFuzzyhippo 2 жыл бұрын

I love the intros so much. The one liners and fantastic editing just crack me up everytime 🤣

@Hitycooking 2 жыл бұрын

kzfaq.info/get/bejne/adBkfLKavauddYk.html

@williamlee1429 2 жыл бұрын

"I can't work under these conditions. Me and that tree had words." LMAO.

@CarsandCameras 2 жыл бұрын

I love how unique this bike is! What mini bike build should we do next?

@beagsoutdoorextreme 2 жыл бұрын

Yall should do the same as what you did with the Side Winder but use a Predator 670.

@zacknovell3249 2 жыл бұрын

id like to see a mini boke with a riding mower diff so its a trike type deal

@georgegomez5767 2 жыл бұрын

Congratulations on second place it was awesome event and nice the made dinner for everyone

@TonyyFast 2 жыл бұрын

I'd personally enjoy an all eltric build, using that razor mx650! Would be sick

@nicholascervone4734 2 жыл бұрын

🤔 with the sprocket adapter I'm surprised you didn't weld nuts on the backside of it to make a quick change adapter.

@shanehaws3828 2 жыл бұрын

Divide the time board up into 2 wheel, 3 wheel and 4 wheel categories so you can have top 10 of each!

@bigjay123 2 жыл бұрын

Id want a quad/thumb throttle instead of crank. Idk just me if your keeping it slower.

@corbingray9330 2 жыл бұрын

That's actually a really good idea😂

@Hitycooking 2 жыл бұрын

kzfaq.info/get/bejne/adBkfLKavauddYk.html

@shanehaws3828 2 жыл бұрын

@@bigjay123 wth does your comment have to do with what I said about splitting up the time board?

@sandmanbub 2 жыл бұрын

I wish more people had Charles's outlook. Glad he's become part of the team.

@Hitycooking 2 жыл бұрын

kzfaq.info/get/bejne/adBkfLKavauddYk.html

@Hammerguy88 2 жыл бұрын

"Some times you're the windshield, some times you're the bug." -Dire Straits Nice reference!!!!!

@kevinsellsit5584 2 жыл бұрын

Charles, "I guess it's worth keeping you". The expression on Ike's face (11:02) was classic! You better watch out Ike, it sounds like Charles is planning a Stock buy-out and going for a majority shareholder position. Damn kids these days.

@zacknovell3249 2 жыл бұрын

you guys got me into building cool stuff like this, im working on a mini ike and a full sized cafe racer, im only 15 its so much better than video games fr

@oliververnon6966 2 жыл бұрын

They did the same thing to me. When I first started watching, I thought minibikes were just for people who aren't good enough to ride a dirt bike, but now I realize that they're just cool. I'm building one too with a 3.5 horse Briggs. Gonna be slow as hell, but should be a fun project. Good luck on yours!

@joeradman6608 2 жыл бұрын

I'm only 10 and love doing all sorts of restorations

@edwardweisenburg16 2 жыл бұрын

THANK YOU for flying DOCTOR ISSAC AIR !!!!! Awesome 👍😎

@whatsinanamethatthecaptive577 2 жыл бұрын

Lower the tire pressure on those rigid frames to 10-15 lbs and it will help some. Love all the one liners in this video! Charles: I can't work in these conditions! and Sometimes you're the windshield and sometimes you're the bug. John: (speaking of himself) Ever since those new people moved in, there has been a lot of screaming in the woods. This is why I am subscribed to this build channel and no others: the builds are great, but John, Isaac and Charles, you make the channel for me!

@klintpfiester4728 2 жыл бұрын

Charles was a freaking great addition to this channel

@blackbartbartholomew7122 2 жыл бұрын

Y’all need to feed Chuck a few more cheeseburgers. He’s gonna blow away!

@r.j.7898 2 жыл бұрын

Every vehicle Ike tests always sounds like it gains more horsepower soon as he gets on🤣!! 💥

@hornmonk3zit 2 жыл бұрын

When drilling you gotta peck at it and use oil to keep it cool and prevent binding.

@guardlife 2 жыл бұрын

Charles is turning out to be a dope addition to the channel, brain farts and all 💯💪🏾👍🏽

@anesthetized7053 2 жыл бұрын

charles coming in too hot on the final corner is my spirit animal

@bs4dfocus 2 жыл бұрын

With drill presses, drilling through hard metal = Slowest setting is the best way. Slow the drill down for harder metals.

@JonathanWhoever 2 жыл бұрын

A lot of consumer level presses, "low speed" is still way to fast for steel. I have access to a milling machine. It can go nice and slow, or really fast. Bits last a lot longer too.

@bengineering3d 2 жыл бұрын

22:30 I paused and saw Issacs time before any of you! Thanks Charles!!

@bobmanzi7712 2 жыл бұрын

great stuff , thanks. The build was sweet nice job guys.

@nassarsprojects4280 2 жыл бұрын

You guys should bring back the drift mower cuz you got the dirt track now you just need the mower

@braaaaaains 2 жыл бұрын

lol Like 3 dang brothers, John's just in the middle trying to keep the peace.

@DetroitMicroSound 2 жыл бұрын

Springer saddle!!!! Btw, really glad to see the good amount of safety gear, Ike... Need to see just a little bit more on everybody else at C&C. Look at it this way: Advocate for safety, and your influence could save lives. -Including your own.

@jimburgess9205 2 жыл бұрын

Great build, gentlemen.

@DeltaNineProductions 2 жыл бұрын

It was a real treat to meet you three in Texas last weekend. Keep doing what you do.

@JohnHill-jm7tm 2 жыл бұрын

You guys are having just to much fun 🤣. This Old Man loves your videos. 🛵🧔💝💝💝

@Lucerne9 2 жыл бұрын

Charles hand in the background at 11:53 just screamed "what else am I supposed to say"

@CZ350tuner 2 жыл бұрын

Honda licenced the semi-automatic shifter clutch ("Slick Shift") mechanism from Jawa, in 1967, paying royalties on all models sold with this feature. All Jawa & CZ 2 stroke road, trials & trail motorcycles have featured a semi-automatic shifter clutch mechanism from 1957 to 2021. I ride a CZ 2500 twin and it's a great feature to have, especially when the clutch cable breaks.

@lotuselanplus2s 2 жыл бұрын

Triumph also out with the Slick Shift back in 1957 to 1958,, look it up.

@MiniBikeMike 2 жыл бұрын

Honda had bikes with semi-auto trans well before 1967.

@uncleducksindustries5375 2 жыл бұрын

I had a great time meeting all of you at GPS actually it was best time I had especially talking to Charles he has a great personality they all did but he's really funny I would have loved to talk more but I'm sure y'all get pestered enough. anyways stay safe and keep on keepin on y'all!!

@faroironandcustoms6577 2 жыл бұрын

Nice job guys!!

@jamesperry2366 2 жыл бұрын

Best channel on KZfaq!! Love you guys

@keithschneidly3922 2 жыл бұрын

Enjoyed the memories.

@twocvbloke 2 жыл бұрын

"And on that terrible disappointment..... " - Nice Grand Tour reference there at the end... :P

@antoniorivera6187 2 жыл бұрын

Wow awesome mini bike guys looks great 👍🏻👍🏻👍🏻👍🏻stay safe guys

@stevenwall9599 2 жыл бұрын

Love the content guy's! Keep up the good work! And God bless.

@lonegunn9250 2 жыл бұрын

Keep up the good work. I hope Ike made full recovery from his injury. Speaking of that,when are you revisiting the 4 wheel monster that tried to kill Ike? 😬

@Nunya_Bidnez 2 жыл бұрын

Some WD or PB on that drill press goes a long way in the fight to keep bits sharp. Just a tip from an old timer. Honestly soap and water is best as it in non flammable.

@Z_732 2 жыл бұрын

Yep.. I rob the wife's dish soap and squirt a little in the spray bottle.

@Hitycooking 2 жыл бұрын

kzfaq.info/get/bejne/adBkfLKavauddYk.html

@jayeagle8363 2 жыл бұрын

I love how charles is one of the boys now 👍🇨🇦

@gabebennett8013 2 жыл бұрын

You guys have awesome continent. I extremely enjoy watching you guys, keep up the good video work

@kennethdispain1807 2 жыл бұрын

Still pretty awesome guys

@specialt9744 2 жыл бұрын

Looking good!!

@specialt9744 2 жыл бұрын

Lol that's me on the yellow four-wheeler

@WaterfrontJustin 2 жыл бұрын

Ike's haircut looks exactly like Will Farrel in Night at the Roxbury I loved that movie.

@plasticbutcher 2 жыл бұрын

Another great video guys, I need an engine like that for my mini chopper Stay safe and keep up the great work Rick

@mccathernfamilyprojectsandadv. 2 жыл бұрын

That bike looks pretty fun.

@lookwhatimadetv4480 2 жыл бұрын

cool build

@EJ-74 2 жыл бұрын

Pretty cool 😎

@victoryakelley7290 2 жыл бұрын

Isaac ride'n the hell out of it 💯💯🔥🔥

@lloydbaker7099 2 жыл бұрын

Great content

@matersworkshop6123 2 жыл бұрын

Now I would loved to have seen you guys riding that bike at the GPS 180!! It was great to finally meet you

@justinfurman9267 2 жыл бұрын

i love all of your vids, that being said you got me excited about that mini bike kit so i went to the link to find out its not the suspension fork like the one you show lol dangit

@keithnewman9043 2 жыл бұрын

haha love the top gear ending XD

@Toby9103 2 жыл бұрын

16:51 is it just me or are clicks like that really satisfying when wrenching? damn over 1mill subs congratulations guys really deserved :)

@sexkrazedpanda 2 жыл бұрын

I grew up on a 4trax 70. The Honda semi autos are my jam.

@hunterwestberry5366 2 жыл бұрын

Love the videos man keep up the creations

@hunterwestberry5366 2 жыл бұрын

Me and a buddy of mine mounted a Honda trx200s on a Colman 300 frame the thing rips but we can’t find a carburetor for it that works the best it’s very picky

@Stucknarutt 2 жыл бұрын

"Haircut" part was the best !

@jonathanhawkins3269 2 жыл бұрын

I just realized who Isaac looks like with his new haircut Will Ferrell from night at the Roxbury lol

@deannapoli5750 2 жыл бұрын

Minibike mafia!

@shotsrodder 2 жыл бұрын

Love the haircut 😂👍

@robertjean659 2 жыл бұрын

Like to see that mini out on the road where it is smooth.

@JB-ro3sz 2 жыл бұрын

Maybe its not that the machines are faster but that you guys get better every time you makew a lap.

@leskobrandon538 2 жыл бұрын

Sling blade haircut rocking it

@hiltbuilt9837 2 жыл бұрын

Ike looked like will Ferrell in night at the Roxbury with his hair cut😅🤘

@kurtd8396 2 жыл бұрын

Thing has some good looking proportions. Sketchy? Couldn't imagine.

@jimmywilson1388 2 жыл бұрын

Charles said some… I can’t work under these conditions…😂🤣😭 I’m dead…💀

@trevorhill7044 2 жыл бұрын

I’ve got a challenge for John. Try and cut an entire sprocket from scratch with the Cross fire Pro.

@chickennugget2931 2 жыл бұрын

Easy to cut, hard to get your profile on your tooth. They don’t really have tooling to do it consistently

@bengineering3d 2 жыл бұрын

That’s what I thought he was going to do. Get a premade contour and add a cutout for the hub. Long plasma cuts make for some good footage!

@Hitycooking 2 жыл бұрын

kzfaq.info/get/bejne/adBkfLKavauddYk.html

@CarsandCameras 2 жыл бұрын

It would be really tricky to get the pitch good enough to work. Plus then the edges need to be tapered which I gues can be done by hand. I haven’t done enough research but I’ll try sometime

@colvinwellborn 2 жыл бұрын

You'd need to cut a sprocket from high carbon or alloy steel and heat treat it. A mild steel sprocket would wear out almost instantly.

@pro_moderngamer4943 2 жыл бұрын

thank you for the video i have had a horrible day

@956DannyM 2 жыл бұрын

“Uh yeah man back in the 60’s” Lmfao!!!!

@westie4ageturbo.749 2 жыл бұрын

The biff today charles v everyone scratch that, charles v everything today On point!

@kermitskustoms 2 жыл бұрын

Well boys.......... Ya did it

@jrflatearth1373 2 жыл бұрын

Ike looks like Will Ferrell in "Night at the Roxbury" 😆😄

@TreySlayPlay23 2 жыл бұрын

Apparently the haters don't seem to realize that Isaac has been a mechanic for years so whatever tool you consider the right tool for the job isn't always the one that you have at your fingertips if it does the trick that's all that matters find some positivity in your life and quit hating on the man for the way he does it it gets Built For Your Entertainment

@michaelakers8698 2 жыл бұрын

Now ya need to make a Springer front end for it and put a solo seat with springs under it👍👍

@jameswagner5444 2 жыл бұрын

Hey man I love the channel!!

@Dan_Kornfeld 2 жыл бұрын

You guys need to build a three wheeler to fat tire two wheeler conversion! Keep doing what you do!

@davolbc 2 жыл бұрын

Charles if you continue to talk to Isaac like that he is going to test your bug windshield theory with you and a windshield lol.

@stoddern 2 жыл бұрын

Charles is really looking for a smack bottom from Ike! LOL

@79tazman 2 жыл бұрын

The boy was headed straight for the rhubarb LOL!!!

@g0ldensample21 2 жыл бұрын

At 4:30 you look like me when i'm high and trying to do things LOL

@hensleyshobbies-doug7761 2 жыл бұрын

It kinda reminds me of a Fox Scrambler, in a way, well the spoke wheels anyways. And the frame too, kinda.? But what I remember the Fox Scrambler we had when I was a kid, it had suspension all the way around. My old man bought that at Kmart back then.

@reivax6368 2 жыл бұрын

ayyy 1,000,000 subs

@rapidfire-0680 Жыл бұрын

Build a suspension for the scat cat minibike, it would be easy to do, and put a Honda XR or an XL 100 or 125cc Motor on it, that would be mint !

@donaldburkhard7932 2 жыл бұрын

Get a scissor lift to roll on vehicles and lift how you want, also put wheel holder in front for bikes. I agree with Charles that a right foot brake be better.

@clintonfaraon9646 2 жыл бұрын

0:05 daaaamn, why did Charles have to do ike dirty like that?😂

@randylee1047 2 жыл бұрын

I feel like im watchin an alternate universe where i just have way more time lol. Wanted to do the same. Still mite with a solid axle go kart and a floor shifter.

@gardoctorgdk9083 2 жыл бұрын

Those holes on the rear dropouts are where you connect the shocks to the seat for rear suspension

@xcalibur8320 2 жыл бұрын

Ike’s haircut reminds me of the Night at the Roxbury.

@Jako8557 2 жыл бұрын

"I can't work under these conditions" 😆😆✨

@lefterispafiliarhs6097 2 жыл бұрын

In Greece we put lifan 110 on our bikes, it's the best engines at low budget!

@bobadam7021 2 жыл бұрын

TopGear and Jeremy Clarkson send out immediate cease and desist letters for that last segment.

@davidowen888 2 жыл бұрын

Scat Cat Rough Rider 🤯

@calebwilliams2369 2 жыл бұрын

Great video as usual always entertaining. Can you please tell me what program you are using for your crossfire pro plasma cutter. Keep up the fantastic work guys.

@taoutdoorstorieswithterrya5411 2 жыл бұрын

Looks like Ike feel asleep in the barber chair. Lol. Thanks.

@Buck1954 2 жыл бұрын

Stock Honda Mini-trail 70's went 45mph out of the box with a 4spd. The rear sprocket was a lot smaller as I recall.

@themoelman 2 жыл бұрын

wooooo - watching later!

@SuperBongface 2 жыл бұрын

you guys need to start using that plasma table to start cutting your own custom gears and gear ratios for all your builds...please?! P.S. Make sure to cut the tooth profiles for the gears for max linear power transfer efficiency from crankshaft to road. I'd love the opportunity to work with you guys. Much love on all your work and rock tf on witch your bad selves~Rage