Karcher Surface Cleaner Bearing Replacement (Skill level = 1 Beer)

Рет қаралды 7,478

3 жыл бұрын

This is a video that will guide you through replacing the bearing for a Karcher Surface cleaner. Everything talked about is listed below. #millerlite
Karcher Surface Cleaner:
www.amazon.com/gp/product/B01...
Bearings: 6003ZZ 17mm x 35mm x 10mm
amzn.to/3EVq4HO
Snap Ring Tools:
www.amazon.com/gp/product/B07...
T-Shirts:
northerntropics.store/

Пікірлер: 16

@MrMattDat Жыл бұрын

VERY nicely done! Your old snap-ring pliers are perfect. One tip, a bit of grease in reassembly can only help get those new bearings in place! Thank you.

@bwash6249 11 ай бұрын

Awesome, just completed the bearing replacement. Thanks for the detailed video. 🔥

@JR007x 3 жыл бұрын

Outstanding, thank you for the follow-up vid to the original! Parts added to my cart.

@duanemckitterick3450 2 жыл бұрын

Mine looks just like yours but the brand name mine is Tool Daily. Having a hard time trying to find which bearing to get for mine and was wondering in you know if they are universal. Thanks, and nice digs.

@SebastianBalos 2 жыл бұрын

I really don't know if they would be universally used. If you are having a hard time figuring it out online id take the current bearing out and measure it. if you click on the amazon link in the description of this video, it will take you to a page where there are several sizes to pick from. the ones i used were 6003ZZ 17mm x 35mm x 10mm. Or just take a gamble and order this one and return it to Amazon if it doesn't work. measuring is probably easier tho. Cheers!

@dianesnider5109 2 жыл бұрын

Great video Sebastian. Do you know how long the bearings last before you have to change them?

@SebastianBalos 2 жыл бұрын

Its really hard to say in hours. The WD40 extends the life as well.

@furrykidz Ай бұрын

Any idea what the size of the snap rings are? Ours were so rusty they snapped before they came out.

@SebastianBalos Ай бұрын

I dont know the exact size but perhaps this will help with your issue. amzn.to/45t1mtH

@jonhines9962 3 жыл бұрын

I have one and most of the time when I run it it’s making my pressure washer surge. Gives full pressure then nothing then full pressure then nothing etc. The nossels are clean so I can’t figure out why it’s surging. Pressure washing runs fine no matter what only with the surface cleaner. I have a gas powered 2,400 psi karcher. Do you have any suggestions?

@anthonycassata5152 4 ай бұрын

Good video minus the language and terminology of your tools. Those look like a pair of snap-on snap ring pliers I bought when I worked at the dealer 46 years ago. They are very good pliers. If you come across some 90 degree ones, that may help in the removal the next time you replace the bearing again.

@lucasgorman2488 2 жыл бұрын

Where do I get bearing

@SebastianBalos 2 жыл бұрын

Link in the description

@joshleib9272 3 жыл бұрын

No grease?

@SebastianBalos 3 жыл бұрын

You can add grease if you want but i find that it washes out pretty quick. I get that it sounds like a terrible idea but i resort to using plain jane WD40 when the bearing starts to slow in the middle of a job. Cheers!