A friend of mine spray-painted it with matt black he did his trims bumpers everything and it came out great and it was 2 years ago. Just food for thought.

Impressive you did this with a beer in your hand the whole time hahhahaha My bad trait is believing I can do this now after watching LOL you did great

Man your work to me is masterful

That is a very lightly used garage. If you are a car guy meaning you do your own work this is a nightmare waiting to happen.

I wouldn't put more gravel in, buy fire brick. measure 4.5 in below your cap stone and mease the thickness of the brick you choose and fill the difference with sand and dry set them. you may need to have a layer of garden cloth to keep the sand from settling. the floor will tuck under your cap stone . They will make for an easy cleanout. . It looks great, good design and build.

I've been dealing with this issue since I bought my 2017 Camaro brand new. Took the car to two different dealerships and the said they found nothing wrong with the car that I just needed to drive it more and the issue should go away. Now my car is no longer under warranty and I'm afraid I'm going to be stuck with a $600 bill to have my transmission flushed. Thank you for the info on the GM bulletin.

Nice tutorial, solves my problem. Cheers!😅

Is it going into v4 mode??

The DE powder is supposed to be there. but when it gets plugged up, it cant clean/filter any more. You can take the top manifold off and clean the grids individually. This is recommended at least 1x-more like 2-3 times a year. But your filter is big vs your pool, so. Another thing I have seen done, is taking the filter cap off, and doing backflush while you hose it. Can be messy if water can collect in the area. BTW, I too am no expert either, and I am at the point of getting algea back after shocking it out. What is the chemical levels you keep for your pool to stay algae free? I know running the pump is the #1 way to keep algea away as water remains being filtered and moving.

Is it brighter or not? You missed one main point. Cheers!

How do you have a 12v feed? How new is your pool? When did they start making pools with LED as a standard?

Im not sure about the type of flooring America has but in the uk it is not a good idea to glue flooring down or grout it as the wood needs to able to expand and retract during cool and hot whether unless im missing something neat and tidy job just curious if its gunna last for 10 to 15 years as they should

how much was the counter top without the labor? Just for the bar side...avg?

Hallo Sab, my question, I have MS6, and maximum pressure is 6 bar. But why ms6 only get 2,4 bar??? Happen after safety instruction fault. Any related with neca ?? Or you have comment? Please..

How do you seal the stone around the sink faucet? Do you leave the faucet attached or does the sealer stain the faucet at all?

A piece of green uni strut works great for removing those plugs

I don’t think it was overkill to drop the pan n clean it. It helped you get it flushed out quicker, and a clean pan is better than a dirty pan. Glad it worked!

Hey, thank you for your video. But I am hoping you can help me with a little different problem. I had a Briggs and Stratton surface cleaner that only works with machines of 2400 PSI and above. I used it with my old Gas machine of 2800 PSI(I am a homeowner and did not need a higher PSI for my small property.). I always had trouble starting the gas machine so I purchased an electric Craftsman 2100 PSI from a local hardware store and now that Briggs and Stratton surface cleaner will not turn with the lower PSI electric machine. So I bought a new surface cleaner from eBay and on the first outing it did a bad job. It was leaving circular marks. The seller said to clean the nozzles that it must have gotten dirt in them from the gun and wand. But it was the first time I was using it? How can that be? So he recommended I use that wire tool to clean out the jet nozzles. But when I squirt water after that the water does NOT come out the other end. I do not need it for a large project and I was hoping that this easy-to-use electric washer will work with this lower surface cleaner that is MADE for the PSI on this electric machine. Here is the item I purchased from eBay take a look--( 15" Pressure Washer Surface Cleaner Pressure Washer Extension Scrubber 3200PSI US $36.99 Sold by: interstatesuppliesandservicesuser ID I am frustrated. Can you advise? I also am looking at another machine with a higher PSI but I never heard of this product- maybe you can advise on this one- if it is better than my craftsman I will be able to use my BRIGGS and Stratton surface cleaner because it works with the higher PSI machine. ( (PowRyte Electric Pressure Washer Foam Cannon 4 Different Pressure Tips)-- Is this a solid machine that will be better than my Craftsman electric. OR can you tell me if Craftsman Electric is a good machine as is and just to get a better surface cleaner that will work with a low PSI machine.. here is my Craftsman unit---(CRAFTSMAN Electric Pressure Washer, Cold Water, 2100-PSI, 1.2 GPM, Corded (CMEPW2100) Thank you for listening. I am frustrated.

Love it Dude. Fucking Awesome. I am going to do the same.

so if i decide to buy a used Nissan frontier 2004 -2010 i need to make sure i bypass the Trans Cooler and buy after market like this ? Tru-Cool LPD 4588 Automatic Transmission Cooler 19,000 GVW LPD4588 Fluid Oil True-Cool OC

Using a Vette as a worktable??

Did you prep it?

Potty mouth!!

Any idea what the size of the snap rings are? Ours were so rusty they snapped before they came out.

I have a 2016 (base) Stingray automatic. Had been experiencing the transmission "shutter" as you call it. In actuality, in cruise control "D' mode (not manual) at road speed (60-70), you would see the tach jump up and then back down about 200 rpm every 7 or 8 seconds...and yes, it felt like you were hitting construction joints in the roadway. No noises...no violent car moves. When put in "manual" mode it will not do this. What I have found is that GM in their wisdom to make all the gas mileage from the LT1 that they could, caused issues with the trans. It cycles in and out from 8-cylinder...to 4-cylinder mode. My fix...I had a mechanic update the firm ware to "cut-off" the 4-cylinder mode totally. Mine stays in 8-cylinder all the time now and I no longer have the shutter issue. I do not use "eco" mode at all...never did. Next thing to do....I'm having the transmission flushed and filter changed to Mibil 1. That should help the trans overall.

im dizzy watching this

I bought my 2016 Z06 new in September 2015 and have never had any issues! My seventh vette and by far the best. I do have the new trans fluid because my dealer called me and said to do it at no charge.

Please stop spinning.

Great video, super helpful and much appreciated! 👍

Hey man is it still going strong?

Your first clue should have been when you blew up your 12v bulb in the house.

THANK YOU so much for this. We are trying to decide to remove ours. Perfect and great job !!!!

Dude, don't film when your buzzed.... Could not watch this as we kept spinning and spinning... and spinning...Thank you for the buzz!

I really enjoyed the cursing. As a Paratrooper Combat Veteran, I needed to hear some cursing today and it felt good lol

Yam - aha 😂 I never knew so many people pronounce these major brand names incorrectly.

Lol arnidfoea

I saw the old rainbow hampton bay carousel ceiling fan

Mine is a 2012 mk3 focus 1.0 ecoboost zetec s

Easiest way I got to those sensors is through the top. I laid on top of intake bank 1 you wont be able to see it but u can feel it same thing with the driver side camshaft sensor did it through the top. Only crankshaft sensor I had to take off tire and plastic water shield. Work for me for some reason my camshaft sensor bank 2 driver side keeps going out bought 1 from AutoZone and it still threw out PO345 camshaft sensor bank 2. Tomorrow gonna exchange the new one I just bought hopefully the new will work

Hmmm, I think I could have 2 beers and still accomplish this…😂

Very nice work, but you wasted money on the green tape..... plain old masking tape would have worked the same.... js.......... again, nice work.....

why not pack the bearing with red grease and the same on the nylon bushings of the EZ clean.

So mutch fucking wires in the furnace

Thanks for updating. The main thing about such products is durability. That's for the price we pay.

That’s pretty cool!!

How did you get a perfect 90 degree cut with a sawsall?

I was about to buy an EZ or Ryobi from someone local on Craigslist. Saw your video, complete with Amazon connection for both the Karcher surface cleaner and bearings. Went with that. Maybe it was the humor and beer, or the straight farm language...Many thanks.

Drink everytime he says hybrid!

Boo who.....

Came for the trim coat watched the Pulsar most of the time 😂