Episode 3 of the Kawasaki ZX9R project, in this episode I perform a compression test and finish removing all the electricals including the wiring loom.
Пікірлер: 12
@gormanspacemarine10 күн бұрын
Good luck too, Ive recently done a zx7r with a jumpy gearbox, bent selector fork. zx9 is like exactly the same looking at its guts.
@2TLifesTV2 ай бұрын
nice build brother! cheers
@pb2222216 ай бұрын
I couldnt tell, did you have the throttle all the way open when doing the compression test? With the throttle closed it can cause low readings. I had a Vtwin that read fine on one cylinder but low on the other. With the throttle open the low cylinder started reading normal. The other cylinder had a big crack in the intake boot so the number didnt change on it.
@motocrad6 ай бұрын
Hi, I tried it both with and without the throttle open, it didn't seem to make much difference 😞 That is interesting about your VTwin 🤔 All the best.
@myz06rocks8 күн бұрын
Let me know if you’re not past the point of no return or if you have any questions. I’ve had my 2001 for years and completed much of this work. FYI with th3 valve maintenance complete I got 210/210/220/220 on my compression test. These engines have lined cylinders, they cannot to my knowledge be honed.
@motocrad7 күн бұрын
That sounds like you're getting great compression. I didn't know that about the cylinders, I haven't done it yet, life has got in the way a little and the project is currently on hold. I'll do some homework before starting the rebuild :)
@HalfdeadRider6 ай бұрын
I didn't realise you have to do the compression test on a warm engine, I am sure it doesn't matter! My ZX9r still had a consistent 200psi before changing the head gasket and doing valve clearances, I didn't feel the need to recheck after, but kind of whish I did to see if it was any different. The spark plug gaskets were gone on mine, surprising as it's now still only at 23k miles. You are brave just yanking all the wiring out 😂 I guess from how confident you come across that your background is as a mechanic?
@motocrad6 ай бұрын
I think it's more best practice to compression test a warm engine, but not essential. As you'll know, things expand when they get warm, so you'll get lower results with a cold engine. I think the other benefit of running the engine first is you'll get the oil around everything. I wondered if that was why cylinder 4 had higher results, I've not checked yet, but that cylinder could be closer to the oil pump, so could have had a better feed. No, not a mechanic, I'm actually a computer programmer so thanks for your comment 😀 I've tinkered and maintained cars for 30+ years, and more recently bikes. 200psi is a really good result, you must have been happy with that 😀
@HalfdeadRider6 ай бұрын
@@motocrad Yea that does make sense that you'd get a better result with a warm engine. Just doing the compression test will pump oil around and bring the oil pressure up though. You can definitely tell you know your stuff to some degree, my skills are probably on par or there abouts. I was a mechanic for a very short while from time to time in my younger days, but certainly not a seasoned mechanic, but always do my own bikes, and cars when I did have them. Yea I was well happy and a little surprised with the compression tests. This is going to be a fun project as it gets going some more 👍
@motocrad6 ай бұрын
Thank you and ditto about knowing your stuff. It was your video that helped me fully understand the breather and kleen air system on these bikes 😀
@gormanspacemarine10 күн бұрын
Personally I think you're making ALOT of unnecessary work. You should have put oil in each cyl first overnight. That will give you a accurate reading. also, please throw your Ali-Express screw in comp tester away, the hose swells and stuffs the reading, as well as not sealing.
@motocrad8 күн бұрын
Thanks for the advice, I do have a habit of buying Aliexpress crap. Making unnecessary work is what it's all about, I wanted a bike I could strip down to the last bolt and then rebuild. Having said that I've been distracted for a few months and the chances of it all going back together are getting slimmer each day 😉