KBDFans Switch Pads vs. PE Foam Mod vs. Tempest Tape Mod

Рет қаралды 115,427

Күн бұрын

READ BELOW FOR LINKS AND TUTORIALS
Comparing the brand new Switch Pad's from KBDFans to the popular PE Foam mod and the Tempest Tape Mod.
It is my first time making a video essay styled video like this, so I may have made a few mistakes along the way, but I hope you can learn something from this video and enjoy :)
-
Links:
Tempest Tape Mod - Tape:
amzn.to/3yNSxJz
PE Foam Mod - PE Foam:
amzn.to/3lRFvr5
Switch Pads - KBDFans Switch Pads
kbdfans.com/collections/switc...
Switch Pads - EVA Switch Pcb Foam (not used in this video)
swagkeys.com/collections/soun...
Switch Pads - PE Switch Pcb Foam (not used in this video)
swagkeys.com/collections/soun...
-
Tutorials:
Tempest Tape Mod Tutorial:
(Tutorial from the creator of the mod)
• The tape mod
PE Foam Mod Tutorial:
(The pinned comment on this video has the information regarding possible risks related to using certain PE Foams, plus the video is a fantastic tutorial on how to accomplish the PE Foam Mod)
• The Keyboard Cheat Cod...
Switch Pad Tutorial:
This video :)
-
Keyboard Info:
Keyboard: KBD67 Lite (Polycarbonate Plate, PE Foam Mod)
Switches: Alpaca (Lubed w/ Krytox 205g0, Filmed w/ Deskeys)
Stabilizers: Durock V2's (Lubed w/ Krytox 205g0 and Dielectric Grease)
Keycaps: Gliging Doubleshot PBT Minimalist Style Japenese Keycaps
Deskpad: Zambumon Hexagon
-
Keyboard Links:
Keyboard - KBD67 Lite:
(Polycarbonate Plate)
kbdfans.com/products/kbd67lite
Switches - Alpaca:
swagkeys.com/products/primekb...
Stabilizers - Durock V2 (alpaca edition no longer available):
amzn.to/2WTXBho
Stabilizer and Switch Lube - Krytox 205g0:
divinikey.com/collections/lub...
Switch Film - Deskeys:
swagkeys.com/collections/swit...
Keycaps - Gliging Minimalist Style Japenese Keycaps:
amzn.to/3fFtwIX
Deskpad - Zambumon Hexagon:
novelkeys.xyz/products/zambum...
-
Sponsors / Afiliates / Partners:
amzn.to/3Ak9lYY
amzn.to/3lD6qqg
-
Other Tech Featured / Used In This Video:
Camera:
iPhone X
amzn.to/2VsVcu0
Microphone:
Blue Yeti
amzn.to/3jyhfXW
Mouse:
Logitech G Pro Wireless Superlight
amzn.to/3jLpUXp
-
Sound Test Post Processing:
Gain (+ 6db)
-
Song:
Song provided copyright free by Epidemic Sound
www.epidemicsound.com/referra...
4 Course Meal · Matt Large
• 4 Course Meal
-
0:00 Intro
0:16 Switch Pad Info
1:15 How To Install Switch Pads
1:45 Keyboard Info
2:29 Sound Test Explained
2:59 Sound Test - No Modification
3:19 Sound Test - Tempest Tape Mod
3:39 Sound Test - PE Foam Mod
3:59 Sound Test - Switch Pads
4:19 Sound Test - No Modification
4:24 Sound Test - Switch Pads
4:29 Sound Test - Tempest Tape Mod
4:34 Sound Test - Switch Pads
4:39 Sound Test - PE Foam Mod
4:44 Sound Test - Switch Pads
4:49 My Opinion
4:56 Pros / Cons - Tempest Tape Mod
5:23 Pros / Cons - PE Foam Mod
6:03 Pros / Cons - Switch Pads
6:35 Conclusion
7:03 Outro
-
A Quick Disclaimer - Some links I have provided are affiliate links that generate a small commission to support this channel. It helps me buy more stuff to create content if you shop through those links at no cost to you! Thanks for the support! :)
#switchpads #pefoam #mechanicalkeyboard #pefoammod #pe #foam #tempesttapemod #tempest #tape #mod #soundtest #tutorial #kbdfansswitchpads #pcbfoam #switch #pads #kbdfans

Пікірлер: 157

@barrylinkiewich9688 2 жыл бұрын

I really appreciate you doing the quick back to back sound tests after the full individual tests, so many youtubers don't do this when discussing multiple changes so you have to swap back and forth between timestamps manually to try to compare.

@johnayres3145 2 жыл бұрын

Wow, great audio balancing! I didn't have to crank my volume for the sound tests, and the normal audio wasn't super loud on the return. Love the back-to-back comparisons at the end!! easy sub

@MichaelSmith-mw3ub 2 жыл бұрын

Cheers for the sound warning. Have been turning my volume up to really get a feel for the difference all night for different mods and plates. Just to get my ears blown off when the music and talking starts up again. Honestly your the first channel to place that warning on a video, earnt a subscriber and a thumbs up just for that alone.

@JaeyouPark 2 жыл бұрын

This is insanely high quality! Motivates me to step my content game up 🔥You will be at 10k in no time my friend, keep doing you!

@tjptech5206 2 жыл бұрын

Thank you so much haha. Funnily enough your videos are part of what inspired me to make videos. Love your content, and thanks for the support. :)

@JaeyouPark 2 жыл бұрын

@@tjptech5206 you made my day! See you around :)

@huoqw6459 2 жыл бұрын

yo the production quality on this is amazing. would not be surprised if u hit 10k in a bit!

@tjptech5206 2 жыл бұрын

Thank you so much :)

@S85B50Engine 2 жыл бұрын

The switch pads might take longer than the PE foam, but the fact that it won't shift around while installing like PE is a huge plus for me.

@Leo-ud9cn Жыл бұрын

I mean, you could have used just a little bit of painter tape on the sides to keep it in place

@S85B50Engine Жыл бұрын

@@Leo-ud9cn 3 letters, OCD

@final3119 8 ай бұрын

My pe foam stretches after tearing down my keyboard a few times and now it straight up doesn’t align with the switch holes without buckling.

@Green-Man 2 жыл бұрын

Damn, you really hammer on those keys. Great video, very informative. Currently rocking the PE foam on the same board as you and liking it a lot.

@tjptech5206 2 жыл бұрын

Do I? Haha. It might be because im not used to the springs and overcompensating. I didn’t even notice that until now. PE Foam on the kbd67 lite has done wonders. Im glad you enjoyed the video :)

@Green-Man 2 жыл бұрын

@@tjptech5206 I mean you probably know better than me but the sounds of the alpacas aren't usually that harsh, listen to some other sounds, and compare, or maybe try typing really lightly and then find a balance? I mean it's not a huge deal.

@alexlow6811 2 жыл бұрын

love the sound of your board! would love to see you trying out different combinations of these mods or even all at once if it fits haha. Nice vid!

@tjptech5206 2 жыл бұрын

Thank you! I am gonna be trying to do some of the combinations to see how (or if) they work. Video will hopefully be up sometime next week!

@kyle9461 2 жыл бұрын

You deserve much more than 24 subs, shocked me to see that your under even 1k. consider me one of the first hundred

@tjptech5206 2 жыл бұрын

Thank you so much :D

@ee1yd 2 жыл бұрын

getting up there, slowly

@samz1074 2 жыл бұрын

Fr this was high quality and I didn’t even know these existed so you’d expect more people to be intrigued

@Lilyium 2 жыл бұрын

Ordering some now, it's always fun to try out new mods. Going to try this with the Tempest tape mod too.

@tjptech5206 2 жыл бұрын

Yeah I have been meaning to try it out with some of the other mod options. I also really want to check out the switch pads that SwagKeys sells.

@duttiee 2 жыл бұрын

I’ve seen you in multiple keyboard comments sections

@WTFA54 2 жыл бұрын

Excellent video! The algorithms linked me to this and you got a new sub. Looking forward to more content!

@tjptech5206 2 жыл бұрын

Glad you enjoyed :)

@hingsing1 2 жыл бұрын

Really informative and concise, well organized video thank you

@francisandbridget 9 ай бұрын

Awesome video. Thank you for doing this. Reviewing pros and cons was super helpful. Many thanks!

@ellowell8160 2 жыл бұрын

Not that keyboard channels hit millions of subs or anything but color me shocked that you're under 1k. This is insanely high quality, you deserve more!

@tjptech5206 2 жыл бұрын

Thank you so much! I wouldn't be surprised soon if some creators starting hitting more and more subs soon, the keyboard community is growing fast!

@benipppp89 2 жыл бұрын

Feels good to watch almost the same build as mine test different mods in one video. (beside the stabs and keycaps XD) Gonna try out the PE foam mod(maybe +tape mod). Great video!

@tjptech5206 2 жыл бұрын

I’m a big fan of the alpacas with the kbd67 lite. The PE foam that I use (linked in the description) has worked well for me. I’m gonna make a video soon about the different combinations of mods available. Thanks :)

@benipppp89 2 жыл бұрын

@@tjptech5206 Thanks for the reply! Alpacas with kbd67 lite are way too goooooooood! Just finished the PE foam mod and it works very well for me too, much more THOCC on my kbd67 lite now :D I'm also considering try adding tape mod soon :D

@yoitsmegabe 2 жыл бұрын

Great vid. Subbed. See you at 100k homey!

@_______6398 4 ай бұрын

Thanks for the informative video. After getting into the custom keyboard rabbit hole as a new interest I noticed it was pretty uncommon to find any info on the “standard” order of the layers so I mistakenly ended up installing the big “keyboard” foam pad (not the individual foamy thin switch pads) on top of the plate. So I have to take everything apart 🤦. However I have seen some KZfaqrs do it like I did…? Have you tried it the way I’ve explained? (Keyboard foam on top of the polycarb plate vs under it like you showed in the vid)? If so, how does the sound compare? Thanks again 🙏🏻

@frebasaurus2331 2 жыл бұрын

Dang this was a great video, definitely underrated. :D

@supersop1367 2 жыл бұрын

What a surprise

@donathan5932 2 жыл бұрын

What if you do all these at once? I’m thinking about getting the switch pads and currently did the tape Mod and used paper towels instead of foam cause I lost my foam.

@King-xx6vz 2 жыл бұрын

Do you think the switch pads would mute the board? I bought a new Q1, never heard the stock board sound before and put on the switch pads right away. It sounded super muted now and im not sure if i should remove it.

@reliablespoon Ай бұрын

your a keyboard enthusiast that cant touch type. I respect that, its a dangerous world out there.

@duckkeebs 2 жыл бұрын

great video :) but, i cant help but notice some suppression in the mic. other than that, very well produced and informative :D

@angrynerd2103 2 жыл бұрын

Did the pads make it hard to insert switches? And is it worth it with a silicone dampener.

@afifiromli5984 2 жыл бұрын

Hello in your opinion, can this switch pad replace plate/pcb foam?

@HoneyBeanSam 2 жыл бұрын

Have you tried combining the switch pads with the tempest tape mod? curious what that would sound like. Great Video!

@tjptech5206 2 жыл бұрын

I was thinking about making a follow up with a combination of the mods, I have not tried it yet though. Hopefully sometime over the next few days I will test it out. Thank you im glad you liked it :)

@srg3443 2 жыл бұрын

seconded

@pyrobunny_mdpl 2 жыл бұрын

I currently have a few boards built with the KBDFans foam stickers and the tape mod, and it gives a very poppy but airy sound. I actually quite like it, and it makes some cheaper boards sound much more premium.

@davieslm 2 жыл бұрын

When you assembled and pe modded it, was it quite difficult to screw the PCB, pe-foam, silicone layer, and plate together? I just did it and it was like I needed slightly longer screws - it just about caught the thread.

@tjptech5206 2 жыл бұрын

Hmm, it wasnt too difficult for me. I will say that it definitely felt a little bit tighter, but not to the point of issues closing the case. What case do you have?

@davieslm 2 жыл бұрын

@@tjptech5206 The new V3 aluminium case.

@hide598 Жыл бұрын

What about IXPE switch pad vs Poron switch pad? Will IXPE be the best of both world?

@davieslm 2 жыл бұрын

Great video. Do you know if it is possible to remove the silcone dampner on the kbd67 llite? I just asembled a KBD67 Lite R2 with Durock V2, Boba U4T, GMK WoB and PE foam modded it. I have a Tofu with same switches, keycaps, centre posts drilled out and pe- foam modded and to be honest I prefer my the sound of my Tofu. However I think its due to the metal case and I have the kbd67 V3 case coming in a few days so I am expecting the KBD67 to sound the same or nicer than my Tofu. btw - my Tofu did not sound nice until I pe foam modded it.

@tjptech5206 2 жыл бұрын

Im not entirely sure, but I have heard from some people that the silicon dampener, dampens it a bit too much. Im sure when your V3 case arrives you might be able to go without the silicon dampener layer.

@davieslm 2 жыл бұрын

@@tjptech5206 My V3 case arrived yesterday and I much prefer it to the ABS case. It does not bend in the middle and looks /feels nicer. I have been told the silicone dampener is needed as its part of the gasket mounting system.

@goonfish 2 жыл бұрын

@@davieslm yeah unfortunately, unlike their other gasket boards which come with seperate strips you stick on yourself, the entire silicone pad _is_ both, the "gasket" & the plate support on our 67Lites. Ive been considering possibly just chopping the gasket nibs *off* of the whole pad itself, and only using them. But then I'd need to use some kind of plate-foams between the pcb+plate for support. And I'm not entirely sure how stable the assembly would be after the fact. If you're rolling in enough dough that you can take the loss if there are unforseen consequences, the hobby would be super grateful for your sacrifice! And hey, who knows; if it does work than we finally found a way to keep the gasket-mount while maintaining a full-range of acoustics!

@ichsanrchmn 3 ай бұрын

I heard some cons for the tape mod, they said the adhesive from the tape could damage the pcb, it may cause short circuit blablabla (i have no clue about electricity😂). But i tried the tempest mod for almost 1 year and it's still fine, but i don't know what would happen next to my pcb. Got any opinion about this? Cheers bro🍻

@darknessblades 2 жыл бұрын

How would the Switchpad + switch Film sound with Unlubed BLUE/clicky switches. Cannot find anything online about this

@truesatan5253 Жыл бұрын

How many layers of tape did you aply for tempest tape mod?

@riteetir232 2 жыл бұрын

Can you recommend any to replace the pe foam mod???

@safayat7640 Жыл бұрын

Which should I go for? Keysporon pads or PE pads

@carldrickjunatan271 2 жыл бұрын

Awesome review!

@Kholaslittlespot1 2 жыл бұрын

Have you experimented with EPDM high density foam for behind PCB etc? I'm unsure what thickness to buy. I've also found a great source of cheap silicone sheeting. It's listed as 'large silicone cake dough mat' and if you're prepared to ignore the graphics is super cheap for a 50cm x 40cm sheet.

@hisdesciples 2 жыл бұрын

How do you like it?

@KiD2x2 Жыл бұрын

can I have the link to the liner mod from Keybored? cant seem to find it, thanks

@supersop1367 2 жыл бұрын

Underrated content

@fiberxiao2423 2 жыл бұрын

can i use a kbd fans switch pads on a non hotswap PCB?

@MrZachzippo 2 жыл бұрын

what is the source for your cabinet/shelf liner

@involuntarysoul3867 2 жыл бұрын

does the Switch Pads make the switch sit higher?

@marcus-wv9ti Жыл бұрын

hello can i use PE foam as PCB foam with soldered keyboard?

@aiden6705 2 жыл бұрын

wait so can you do all these mods at once, or no?

@shinjid3705 2 жыл бұрын

not really a fan of pe foam because it kinda make the board louder which isnt exactly what im looking for. Might try out the switch pads.

@Creamy_ExePlayer 2 жыл бұрын

knowing this will harm your pcb when doing it incorrectly with the pe foam make me really dont want to try it. not to mention that some pe foam we find from the market maybe anti-electric, if you accidentally mess up, some keys wont work and from your explanation, seem pe foam will make the kb sound "popier" while actually im just trying to dampen the sound down but it's fun to learn more about kb and sound but pe foam still can be useful the 2mm foam i got from internet isnt fit to my rk g68 the pe foam still can be put in the case to be less hollow, and also you can use it for preference since some foam actually is unable to look through, lol. and i dont want to cut that foam into pieces much the kdb pads seem is the most safe mods. but dang, the delivery at the place i live is having hard time bc of quaratine. besides, seem it doesnt affect much as i expect (from your video) anyway, nice content, hope you will have more sub

@tjptech5206 2 жыл бұрын

I agree. I love the sound from the PE foam mod but I would definately not try it on an endgame board just to avoid the risk. The switch pads are safe, and the sound is pretty nice. Thanks :)

@hw.lds08 2 жыл бұрын

you are gonna blow up very soon i know it

@srg3443 2 жыл бұрын

whats your favorite tactile switch?

@randomcitizen_ 2 жыл бұрын

how thick is the pe foam you used for this mod?

@tjptech5206 2 жыл бұрын

I believe it is 1/16 inch (or 1.58mm), and it works fine with my specific board perfectly. It is linked in the description :)

@Ben-ib2xu 2 жыл бұрын

Subbed great videos dude

@tjptech5206 2 жыл бұрын

Appreciate it :D

@nguyenhuynh1432 2 жыл бұрын

May I ask have you try putting tape on the above surface of PCB. It's like PE foam mod but using tape instead of PE foam. Does it produce the same sound as PE foam? Im in middle of lock down so I can't get masking tape to try this myself :(.

@tjptech5206 2 жыл бұрын

Ooh I have to try that, Im not sure how good it would be for the board, but I will have test it sometime.

@peterdankov390 2 жыл бұрын

Can i just use all three options?

@3AsianBoi 2 жыл бұрын

I know the the kbdfans foam pads are poron. Some places are selling PE material switch pads. Is PE dangerous for messing up the pcb?

@MarqelexsisAmaro 2 жыл бұрын

Only certain types of PE are, the issue/ concern with them is static discharge, there are PE foams for product packing which have ESD protection but don't have links for you for sheets to do the PE mod.

@Brudder 2 жыл бұрын

Great overview and guide! Easy sub from me :)

@tjptech5206 2 жыл бұрын

Thanks so much. Your PE foam mod material was the one I linked the description, as well as the one I used to initially learn how to do it :D

@Brudder 2 жыл бұрын

@@tjptech5206 I appreciate the support

@massa6784 2 жыл бұрын

Nice Job man. Thx!

@tjptech5206 2 жыл бұрын

Glad you enjoyed :)

@CrazZyChiCKinzZ 2 жыл бұрын

Great vid pe foam took it for me

@tjptech5206 2 жыл бұрын

PE Foam mod really does the trick, especially for how significantly the sound is improved

@lilrazthegamer8721 2 жыл бұрын

What if I did all of the mods?

@akkad7514 2 жыл бұрын

can it squeeze hard enough to combine both pe and switch pads?

@OHOE1 2 жыл бұрын

not in all keyboard but, I guess you can always try.

@cruxae 2 жыл бұрын

They all sound really hollow but I suppose that's just the KBD67 Lite?

@tjptech5206 2 жыл бұрын

I tried to do as much of that as I could with the foam I put in under the PCB foam, but unfortunately, the KBD67 lite is hard to make sound un-hollow

@fictitiousnightmares Жыл бұрын

I would have liked to hear the switch pads + tape mod without the PE foam. I would hope it would be comparable to the PE foam mod itself.

@lukas______ Жыл бұрын

And now switch pads are sold in precut variations so it'll be instantaneous!

@miniblasan5717 Жыл бұрын

What does "Holee mod" means?

@riceoverwife 2 жыл бұрын

the thocc is mad ngl

@tjptech5206 2 жыл бұрын

Thock Gang :)

@Malficion Жыл бұрын

We need a stryrofoam keyboard Stat! That's the true end game.

@amizan8653 2 жыл бұрын

I think I'll go and combine both the pe foam mod + tempest tape mod.

@tjptech5206 2 жыл бұрын

I believe that would work well together. I have yet to test it yet though. But I’m sure it would sound fantastic :)

@rks5457 2 жыл бұрын

Rather have the option to remove the switch pad layer.

@NotxSplayd 2 жыл бұрын

Someone (maybe stupidfish?) needs to make pe foam switch pads adhesive based

@tjptech5206 2 жыл бұрын

SwagKeys.com has released some that look very promising :)

@kiwiasian 2 жыл бұрын

Switch pads sound like pop corn popping in a microwave.

@darrenm4417 2 жыл бұрын

When you don’t want to test each mods individually. Put switch pads+pe foam+tempest mod wkwkw

@angelguzmanmondragon2270 2 жыл бұрын

the foam does not make good contact, I think the best cheap is the tape and the most recommended switch pads

@CD-Beats 2 жыл бұрын

How about all three

@tjptech5206 2 жыл бұрын

I just uploaded that video featuring the combination of all 3 mods :)

@phabianhernandez5460 Жыл бұрын

cant you just do all 3 to have the ultimate thock

@aneki2219 2 жыл бұрын

возьми pcb+plate+switch, и залей это все силиконом, типа силикон вместо case

@rlnwvr 2 жыл бұрын

What if you use all the mods together?

@dannieboi3742 2 жыл бұрын

PE wins. Cheap/free and thockier. No brainer. Nice review and comparison my dude. Thank you.

@Juicip 2 жыл бұрын

pe foam is deeper thocks

@tjptech5206 2 жыл бұрын

Thock Gang :)

@reviewforthetube6485 2 жыл бұрын

Tape mod actually sounded the best lol I like clack pe foam is being over used it makes all boards character lost it does sound good but the switch sound goes away and just true into a thicker thock sure thock is good but sometimes it'd to much a nice pop/clack imo has character and life lol if anything I hear people say the lbd67 lite has plenty of thock I don't see wanting more lol at times its to much imo but it sounds good sure but gets old quick the more thocky builds/pe foam builds you do the more you will end up swaying more towards clack it always happens everyone wanna thock at first thne overtime the clack is what starts attracting people lol

@OHOE1 2 жыл бұрын

More Thock the better

@reviewforthetube6485 2 жыл бұрын

@@OHOE1 not for me but hey all preference. I like a lively build that has a nice higher pitch as people would call clack lol.

@nbshftr 2 жыл бұрын

please dont process your sound tests, if your mic isn't good enough to give that good of a sound, then just leave it as raw as possible (that you're comfortable with)

@themechanicalrabbithole9041 2 жыл бұрын

Damn just another thing for me to throw my money at

@tjptech5206 2 жыл бұрын

haha I get the feeling, I havent been in the keyboard community fo too long but I have already gotten addicted to spending money on everything I see

@albert_chen 2 жыл бұрын

That space bar sounds like I'm getting slapped!

@kopprob7959 2 жыл бұрын

Hello, there, love to check your video, and just wondering how to cooperate with you, as we are a mech keeb seller. and also send you an email for business enquiry. and looking forward to hearing from you.

@tjptech5206 2 жыл бұрын

Thank you, I apprecate your interest, my business email is tylertjpofficial@gmail.com

@hairtoss7975 Жыл бұрын

PE sounds best, IMO.

@hayata5513 2 жыл бұрын

everything sounds good but the spacebar.... 💀 at least for me.

@wall8350 Жыл бұрын

i thought tempest also might damage pcb?

@Joeleon2 2 жыл бұрын

This is the first time I’ve seen someone with as bad of a right hand as me for typing

@tjptech5206 2 жыл бұрын

Haha I think my more dexterious left hand is from gaming, leaving my right hand useless when typing lol.

@Joeleon2 2 жыл бұрын

@@tjptech5206 pretty much the same with me, don’t think I could fix it either unless I get a split board

@tjptech5206 2 жыл бұрын

@@Joeleon2 yeah I was thinking about getting blank keycaps to try and relearn a proper typing method lol. Idk if it would work, and it would be nice to be able to type faster… and just better lol.

@fo9989 2 жыл бұрын

Another con for the pe foam mod is that it makes all boards with pe mod sound the same or almost the same

@krystof5271 2 жыл бұрын

Why does that matter if it improves the sound?

@jaceyang 2 жыл бұрын

@@krystof5271 It does matter if you have multiple keyboards and don’t want all of them to sound like a Jelly75😉

@belphegor_dev 10 ай бұрын

It doesn't matter since almost everyone is going for the same ThOCc sound anyway.

@ahhlongg 2 жыл бұрын

my breathing sounded more diff than this

@suryaya441 2 жыл бұрын

The switch pads make almost no difference. Might as well just go stock

@dhaerque 2 жыл бұрын

Did you try it yourself or just an observation from the sound test?

@SubterraneanChick 2 жыл бұрын

Opinions are like the other…state the obvious? Nothing special one can report and outcome always the same: get what sounds good, looks best and fits your budget.

@AnggaTirtaFL 2 жыл бұрын

I honestly cant tell the difference. But please bro learn how to type, you are keyboard reviewer and typing is part of its soul. Looking forward to your next review.

@darkinertia2 2 жыл бұрын

great video, but dude do you know you have 5 five fingers on your right hand? lol you type like my dad

@tjptech5206 2 жыл бұрын

Lmao. Yeah I am pretty bad at typing. Ever since I have gotten into the keyboard community I have improved my wpm from 40 to 80. But that doesn’t excuse my awful typing style lol.

@tombaker2510 2 жыл бұрын

@@tjptech5206 Im impressed you can get 80 on just 2 right fingeres lol

@angelzapata9966 2 жыл бұрын

bro really trynna be like shoobs not even try to hide it same camera angle same vibe same hand movements

@jdbaker82 2 жыл бұрын

I noticed the KBD pads did basically nothing

@jaceyang 2 жыл бұрын

Maybe it’s not so evident in this video but they do sound different when you actually hear them side by side but with all other variables being the same. I do PE foam mod if I want to shoot for a thockier sound (making sure that I use switches and plates that creates thockier sound as well). I would use switch pads for clackier builds but to further help reduce hollowness.

@xkambing 2 жыл бұрын

atleast its still a keyboard..yeah!

@RealColeFarlow 2 жыл бұрын

Jesus use more than just your pointer finger to type lol who on earth didnt take a typing class in high school?!!

@victorreitstatter1705 6 ай бұрын

you are so silent copared to other videos

@Zonatapio 21 күн бұрын

Another enthusiast who spends and absurd amount of time and money on a hobby but doesn't even know the basics of how to use a keyboard. Holy crap, learn how to type. Imagine car enthusiasts who drove with their left foot on the gas and right on the brake.