Really liked the comparison of the 10/22's. Thanks for the great content. I have a 10/22 with a Kidd barrel and Victor Titan stock. The other semi-auto 22 I have is a Thompson Center/Performance Center TCR 22. Thumbhole stock and carbon fiber barrel. Very light. Both shoot very well from the bench. Gotta try a similar comparison with some Eley Semi Auto. Looked like a fun day at the range.

I love my Built set up. I have the Kidd Charging handle and spring Kit.. I am running the Lightest spring. It has helped with cold weather shooting. SK sometimes does not have a lot of power behind it when its below 40 degrees. I can usually tell when it short strokes the bolt as it has a different sound when the round goes off. My budget built is Stock Receiver (Polished), Stock Bolt(Polished and rear bevel on bolt), Kidd Single stage Trigger Kit, Kidd 20" SS Heavy, Orxy Chassis with a Vortex Venom. Running SK standard Plus.

This is some fun 10-22 action. Interesting how these guns can take on such varying personalities...

My 10/22 in an Archangel Precision stock has the factory receiver and bolt with Kidd extractor and charging handle/spring kit, has the Shaw 18" non-threaded barrel, and the Timney 1022ce two stage trigger can run 3/4 - 1 moa at 100yd and remove the head of a sewing pin at 25yd consistently with CCI SV. Excluding the scope thats about 900.

I am finishing up a B14R build this year and my plans are late fall over the winter is to order a complete Kidd Supergrade barreled action with a single stage Kidd trigger and drop it into a chassis. I did use the Oryx Chassis for my Bergara build and do like it, will probably Stay with MDT and use the Oryx on the 10/22 build although I would love to see MDT inlet the XRS chassis for the 10/22! If they did that I would go that route no question. I think for a person starting from scratch with no 10/22 rifle or parts at all the best value for a top performing 10/22 is the complete Kidd barreled action bar none.

Good video. Never hear about green mountain much anymore. They were the thing for awhile.

My latest build is using a tactical solutions X-Ring receiver and barrel with a Kidd 2stage trigger in a KRG bravo chassis/stock. I quite like the current setup. But I do believe I would greatly benefit from a heavier barrel like a Kidd so I may end up swapping it out here soon. Regardless it’s an excellent shooting little plinking gun

Josh, a lot of guys add the Victor cheek rests to lots of other brands of stocks. If you like all other aspects of the Magpul stock, you may consider just adding the Victor cheek rest to improve comfort and performance. That solution is a lot cheaper than purchasing a whole new stock system to correct just that one problem.

Josh, The Magpul Hunter X22 stock has adjustable cheek pieces. The top of the stock comes in 4 different heights and is replaceable. Length of pull is also adjustable. Thanks for another great video!

I absolutely love my KIDD!

Really fun video, Josh. I’m putting together a Kidd 10/22 so this is very interesting. Thanks!

I get much better feeding with both my 10/22 rifles if I draw the bolt back and pause at the rear before letting the bolt fly home to chamber a round vs drawing the bolt back and instantly releasing it to chamber a round. I've noticed others who shoot 10/22s also have fewer feeding problems when pausing before releasing the bolt.

I just built a Kidd rifle but I used a dlask arms receiver they are 7075 aluminum rather then 6065 aluminum 20” mat black barrel nitride scalloped bolt single stage Kidd trigger with a diamondback tactical 6-24 in a KRG Brovo chassis great bench gun

The Titan is a far better stock than the Magpul. Two anchor points. I won our Auto Division yesterday shooting my inexpensive 10/22. Titan stock, 20" Green Mountain blue barrel, Kidd single stage trigger kit, stock bolt and stock Ruger receiver. I have the Riton 6-25x50 X1 scope on all of my .22s now. Sold all of my high dollar scopes. The glass is amazing in this $200 scope. Came in 4th overall out of 36 shooters. Beat a ton of Vudoos, Bergaras, Anschutz, CZs and a Rim-X. Ammo of choice - Eley SABRP

You seem to have a positive view of that oryx chassis. I have an old 10/22 that I think I will put in that chassis after I slap a Kidd barrel on it and see how it performs. You do good work sir, and inspire us all.

Josh, i`ve got one of the older Ruger laminate stock w/fat OEM hammer forged barrel, and its a tack driver with Norma Tac22 ammo. The CCI-SV is also real good in it too. Don`t ask me why, but this old 1022 fatty just drives them in clover leaf's all day long. It will out shoot some of my higher end CZ457`s. I`ve also got an older 1022 pencil barreled one that is super accurate too. That one, believe it or not, loves the Aguila 22-Target ammo. Now don`t get me wrong here, i`ve had a few 1022`s that just sucked. But for these 2 particular ones i mentioned, they are definitely keepers. I like that ORYX chassis one you have there, that`s a beauty! As for the Magpul 1022 stocks, yuck. There is nothing i like about the Magpul 1022 stocks, at all.

Mine is all Kidd except for a Fedderson 16" bull barrel, and a Gun Smither V block. Nothing Ruger left on it. I wanted to see if I could get a .22 semi-auto to hold its own against descent bolt rifles. I think it does.

I also have the Magpul and Titan stock and overall like them but the krg bravo is my top favorite at this moment. It doesn’t work with the Allen gator triple mag adapters though

I really want to go with the Kidd and the Oryx. I love it!

I ran my kyl today at 100 yards a few times in pretty good wind, I think I got lucky. I like the built Kidd with the oryx, I would like to put my mini action 223 howa in an oryx chassis. Good shooting brother

Not getting into my tips and tricks but your pursuit has been mine for 45 years with Ruger 10/22. I can suggest a real dirt cheap build. An 18" SS shaw barrel. Axiom stock bx trigger. Stock receiver and bolt. If you tighten every screw really tight and find what round it likes you will be surprised. Use any decent scope maybe a vortex. But I have a feeling you won't. Sorry about what happened to you I hated that jive

Have a Matthew's Fabrication check riser on my magpul. Works great!

Wonder why some barrels cold bore? Good video

I have a completely stock receiver a BX trigger with a houge stock and a shaw barrel and its not far off from what I see way higher cost build perform but sometimes you just get lucky

if you are looking for a budget build try a Bruno CZ -2E see how well you can get it to shoot

Maybe he's changed something in the last 15 years, but I never got an Eley load to shoot as well as SK/Wolf/Lapua from my KIDD barrel.

Could you try some sorted cci green tag in an ammo test sometime?

Magpul sells three sizes of cheek riser for that stock

My Kidd build misfires Eley all the time. I guess the narrower rim thickness is the problem. Sk and CCI are no problem. I wonder if others have experienced that especially with the Kidd bolt?

Also where do you buy them?

Love my kidd, also would like a desert tactile RemX 😎👍

Got a good video for you to make sir most people who watch your videos who have CZ 457 and switch to match barrel like a lija barrel doesn't show the install and how to head space your rifle just a thought enjoy your videos thxs.

Do you have a part list for the built one

You do realize you can get different cheek pieces for the Magpul stock right?

I have a 10/22 that only thing ruger is the receiver everything is kidd in and a boyds stock

Surprised you did this in the wind. That never worked for me, I'd learn a ton, first thing in the morning at our range. Once the wind came up (every day here) it was just fun & practice. Used to watch the windflags switch and fire to see deflection. 6" at 100 was common!

I’m excited for the budget build. Since you can put the stock 10/22 back together, would you consider sending it to CPC and reporting the results?

I know it's notb10/22 what about the savage mk 2 tr

Magpul does have cheek risers for the stock 😊

Really great information and comments on this video. One question I have is the length of your barrels? 16.5", 18" or 20"? I have always heard that increase length equals better stability and accuracy. Yes it looks like your greatly enjoy your job. Looking forward to making my own some day. Your video and other's comments have convinced me to go Kidd when I do. Thank you very much.

Josh the Magpul Hunter Stock it’s available with three different cheek riser heights

I really appreciate the videos you put together. I have a tikka stock tikka t1x. It shoots pretty good out to 100 yards. I want to be able to shoot to 300 yards. Do I put and barrel and chassis on the t1x or go to a controlled feed action build?

My next build is probably going to be Kidd especially the 3oz/3oz trigger. I've only done Volquartsens in the past and they were phenomenal shooters even with cheap bulk supersonic ammo shooting at 200 yards. It's especially nice when you can easily get sub one inch groups at 100 yards with the cheapest available bulk ammo. I shouldn't have wasted money on the Volquartsen triggers and should have just bought Kidd match grade 3oz/3oz triggers for my Volquartsens. Hope the Kidd match grade barrel shoots cheap bulk supersonic ammo accurately at least like my Volquartsens do at 200 yards.

I'd say the chassis was the difference here. With the Supergrade not having the feeding issues, I'd say the Supergrade in the Oryx would beat the built one.

Nice...

Wondering how your Kidd fit in the MTD Onyx chassis ? I've heard stories of how the Kidd trigger doesn't fit well in the Onyx chassis and was wondering what your take on this matter is ?

Yeah, malfunctions win, especially first round malfunctions.

Its the loose nut on the back of the guns that made the difference! TIE

I have to get a lefty (first gun), so I've settled on the 10/22 Competition. I want to upgrade to the Kidd barrel, but is it really worth it to upgrade the bolt & trigger as well on this model?

Get the check piece kit from magpul

what length of kidd barrel did you go with?

I would like a 20 in barrel but the 16 in is shooting really well how much better would a Kidd barrel be ? Abd would it be worth the expense . my only gripe is it's a pain to clean

What length is the barrel?

Have you tried shooting CCI SV on your Kidd? If so, what is your personal experience? I'm curious how different budget bulk ammo performs on a Kidd

Both are a win because you are shooting!! Any time you get to shoot its a win!

I get so excited when you post a new video 🥳and then find there's no Anschutz 😥

What scope are you running

What bipod you got on that

Josh you should team up with a 22lr manufacturer and develop a rifle called "The Woods Walker."

Watched all your videos. Really like your stuff man. 1 question. Why do you continue shooting eley when lapua and sk shoot better continously on your videos and eley seems to let you down alot?

What Targets are these

need more sound volume in your videos

I take it that the Kidd must have a feed ramp and that is causing some feeding issues. My full Volquartsen build uses a direct feed similar to a Vudoo so I never have a feeding issue with that exact ammo and it shoots sub .5 moa at 100 yards with me shooting it. As well as you shoot, you would have gotten through all 8 KYL targets with my rifle!

What stock is that on the built one?

Be prepared to have your wallet gouged if considering to buy a KIDD 10-22 rifle. Average cost before tax and shipping costs, is 1,500 - 2,000 dollars

Wouldn't a 1/2 MOA @ 50 yards be a 1/4" group. 1/2 MOA at 100 yards is a 1/2" group. A 1/2 MOA at 200 yards is a 1" group.

STILL NOT FAIR.... every single gun has a personality and requires intense practice to find what ammo works best , using a barrel tuner effects it yet again. once you find the best ammo and tune it in to that gun at that yardage you've started preparing for the test but now have to go thru that with the second gun aswell. not until you've done that can you even start think about comparing them against each other! Now you have to find a no wind day and lock the guns in a vise for repeatability. after that you can handle the guns and see just how bad you are at handling! and I'm sure you'll take into effect that the ammo may not repeat even if its from the same batch. so you see if you just want to pickup a gun and shoot it fine and if you want better performance it takes work and if you want to compete best of luck and many hours to you...

It kills me when someone claims they “built” a firearm when actually all they did was assemble of a few parts.

Also, with a target rifle, you are NOT supposed to mount your cheek on the stock. That’s why the stock is made that way. The only thing that should be touching the gun is your thumb behind try e trigger guard and your index finger on the trigger. Once again showing how little you know about target rides and shooting. Also, shooting that fast is a beginners way to shoot. A well seasoned target shooter would take a good 2 minutes to shoot 5 rounds. Especially when you’re trying to see how it groups. Sorry to be so critical, but YT so many follow what you are going and they are then learning the WRONG way to be a good shooter. I can take a stock 10/22 with mini mags and shoot groups like that. My Tenex would all go into one hole. Ok, just got to the part where you said 100 yards. But why test at 100 yards? A .22lr was never built to do that. I don’t get these guys shooting a gun way farther than it was meant to shoot. I would like to see you shoot this at 50 yards on paper. Then we will see if you can shut me up other than the cold bore thing.

U does he talk so much shoot the gun

I hate when everyone uses the term COLD BORE. It has nothing to do with the temperature of the bore. It is because the bore is CLEAN. Which it should never be to test ammo. I never clean my notes j Tim I see accuracy started to fade, which is almost never. Leave that lead and lube in that bore. For a BR gun, or target rimfire of any kind, they shooters much tighter when they are full of that bullets lube. Sometimes taking 50-100 rounds for them to settle in. So many who make these videos that don’t know enough about rimfires to know how to treat them. Yes you clean them but not the bore.

You should really check out Accurate Rifle Systems, if you haven't. Excellent chassis for the money. Fantastic 1022 chassis.