Let;s take a look at the grease points and other lubrication areas on the CK series tractor. E68 #tractormaintenance #wd40 #grease #kioti #greasegun
Пікірлер: 8
@BUTTEWORKSАй бұрын
Greasing a lubricating moving parts is key. A must do regularly. Great video, noted down some of the products you use. Great informative video.
@backyardcountrylivin1514Ай бұрын
Yes, I totally agree. I really like that WD-40 dry lubricant. Works great for those dusty and dirty environments. Hope you have a great weekend and Memorial holiday. Thanks for checking out the video.
@jwh525Ай бұрын
Learned that I've missed the zerk for the three-point lift by the right-side rear wheel. As far as the top link, the manual one that comes with the tractor has two zerks on it. I'll have to add lubricating the linkage pivot points as well. After straightening out the level indicator rod after bending it, I applied some anti -seize to help it slide in the guide easier. One issue that I had was the range selector lever came undone when the nut vibrated loose that connects the selector lever from the linkage. It was a simple fix. Just something that might happen. I noticed some sloppiness in it and should have investigated it before the nut eventually vibrated off. Thanks for posting these videos!
@backyardcountrylivin1514Ай бұрын
Hi John, Yeah that one for the 3 point lever, as you could see was not the easiest to get to. Didn't even think about the manual top link having a zerk. Thanks for that info, it was puzzling me. I also bent the loader level indicator early on and like you that's when I started keeping the tube lubed. No issues yet with the range selector, but I will definitely keep an eye on it. I really appreciate the feedback and additional tips. Hope you have a great Memorial holiday. Take care.
@tractorrookieАй бұрын
😅Excellent Jeff! Maintenance! My favorite 😊 Good job buddy! Based on what I see come into the dealership, some folks need Jeff’s maintenance class! I heard those front zerks take grease better if you lift the front of the tractor up, not sure if that’s true. Cheers buddy 🇺🇸🚜 Have a great weekend!
@backyardcountrylivin1514Ай бұрын
Hey Mike, a little grease goes a long way. That's a great tip, I can see were lifting the front end would definitely make a difference. Going to try that next time. I'm sure you do see a lot of crazy stuff at the dealership. Anyway, good to here from you and hope you and yours have and great weekend and Memorial holiday.
@willhutchinson3242Ай бұрын
That’s another difference with the CK2620 is the 4030C loader has grease zerks on each skid loader lever at the bottom.
@backyardcountrylivin1514Ай бұрын
Hi Will, sounds like the 4030C loader may be a all around better unit. Can't have too many grease zerks in my opinion. I have a 1954 Farmall Super A and I think it has somewhere between 20 and 25. Thanks for checking out the video and commenting. Hope you have a great Memorial holiday.