Replacing the front axle seal on a Kioti CK3510 HST tractor. Not a how to, just a video on how I did it. And I had 0 zero experience and no manual.
Пікірлер: 67
@Tom694133 ай бұрын
This is the best video I found so I can see where the snap ring is. Thank you for the great camera angles and lighting. Excellant job.
@goatram1 Жыл бұрын
Thank you. I actually removed the whole Hub Assy off. Just a extra hour to the Job to reassemble plus the half hour to watch your video.
@robertmitchell89424 ай бұрын
Thank you for this video. You made this more clear than other videos I've watched. Same seal leaking on my CK3510.
@paulcalkins90312 жыл бұрын
Got to have a good sense of humor when owning a kioti. All my bolts were loose when I bought mine
@gentlemanfarmer23913 жыл бұрын
I like your commentary, you say out load exactly what is in my head but never say out load. I love to hear it said out load, very entertaining and informative.
@mytimefliesby10 ай бұрын
Very thankful for the pea brain comment. That's exactly where I got stuck. FYI Kioti part number T5715-27131. It's a 100mmx75mmx12mm seal.
@BittyVids9 ай бұрын
Thank you for the part number.
@savoiefaire71813 жыл бұрын
Great videos! I've got a 2015 with 600 hours. You've covered all the minor issues so far. Keep up the good work, we'll all be watching.
@job38four102 жыл бұрын
Thanks for sharing!!! I dont have Kioti but I thought this was a very good video on what things look like inside when taking front hubs apart with some idea on how to. I dont recall a happier repair guy anywhere, could call you the happy mechanic. The only distraction was about half way though your high blood pressure monitor kept beeping and beeping and beeping...........
@arkansas-n8nate148 Жыл бұрын
Great job filming and explaining in simple terms and easy going attitude. Subscribed
@donaldstrishock3923 Жыл бұрын
It just TOTALLY AMAZES me how just about 99% of compact "TWACK-TER drivers " think their "rig" is the BEST & just not OVERLOADED Enough. Those "measly" snap rings hold that whole "little world" together. With the ADVENT about Loaded tires this problem of "too quick seal fail" is a VERY common occurrence. Thank you Sir for the Excelent vidio and happy safe tractoring. You are a Professional. Best wishes with all your endeavours.
@wogamanj2 жыл бұрын
Enjoyed this video. Good job! Love your attitude and approach to the video.
@markcouture113 жыл бұрын
I would like to be his friend. What a freakin' riot! Great job.
@OShackHennessy Жыл бұрын
I thoroughly enjoyed this video and your commentary 😂
@mr.redneck27153 жыл бұрын
Your a very good cameraman vs mechanic. Mar it up all you want silicone fills all!
@jacksonnicholaus6012 жыл бұрын
Nice vid. Definitely looked like job for a home mechanic.
@burtlade17052 жыл бұрын
Nice video! I have one of these to do and thanks to you, I think I can do it now.
@VBCJesusSaves6 ай бұрын
Good video except for the annoying beeping in the background…. I’ve got a CK2610HST and have had to replace both axle seals multiple times. Dirt and mud just seem to eat them up over time. Wish there was a way to protect those exposed seals! Good job with your first seal replacement!
@devshewitt48093 жыл бұрын
Whatever is beeping is killing me lol
@luckyandy763 жыл бұрын
Sorry about that, must be the garage door sensor. I am about deaf in one ear and cant hear out the other when it comes to certain noises. So i never noticed it.
@devshewitt48093 жыл бұрын
@@luckyandy76 lol
@roostercoggburn74363 жыл бұрын
Good video, nice to see how that all goes together. Thanks 👍
@jeffbova-im7on Жыл бұрын
well done, enjoyed the commentary!!
@davidmuncher19202 жыл бұрын
Great video. I have a ck30 and there is no manual with it.
@CS-xo4kh Жыл бұрын
Excellent how to video ! I learned a lot from it. You can work on my equipment any time.
@michaelparker58143 жыл бұрын
When your done id switch the axle to gear oil like it says in owner manual my dealer warned me to change front axle oil when I did first service so the thin oil didn't leak out of seal
@user-em8pu4sl3s5 ай бұрын
Very nice video,wish I had your sense of humor when working on my tractor! Very pleasant video. I had replaced my right side seal a couple years ago with no Kioti video, went fairly well, now its time to do the other side and its nice to have a guy that has a video for the same tractor as I have.Im wondering if this is a problem with the seals, I actually had to replace the rear drive shaft seal already. The tractor currently has 730 hours on it .
@luckyandy764 ай бұрын
Thanks for watching. I complain about repairs, but in the end I cannot imagine not having my tractor. I can just imagine the amount of work you got done in those 730 hours. I know theres stuff I do that I look at and know without the tractor it would have taken 10 times longer. I just wish everything with tractors wasn't so expensive! I ended up replacing both sides also. But I have had no problems in that area since. Have a good one.
@WestlyEdell3 жыл бұрын
great video thank you.
@rutbuster12 ай бұрын
Question: Is Kioti any relationship to Kubota? Anybody know? Reason I'm asking is because I just replaced the front axle seal on a Kubota 3710 and be damned if it is almost identical to this Kiota. There's very little difference. It broke down the same way. The only difference I did was since it was just the steering seal leaking on mine, I took off the whole assembly from the bottom so I wouldn't have to break the hub seal. Oh, and Kubota has a big O-ring for the hub. I noticed that on this Kioti it didn't have one. Anyway, good job on this video. Very informative.
@mickysponaugle595211 ай бұрын
Would you come help me on my dk45s? That ck 35 looks like a better assembly. Mine dropped and broke apart. Looking for that repair on line. Thank you for your time it took to video. Atleast I have a little of an idea of what I’m getting into.
@hellogoodbye31293 жыл бұрын
What year is your kioti? I just bought a 2020, ck3510 hst. Gonna be pissed if this starts on mine!
@bigkahuna214Ай бұрын
I did it in 10 hours or so. I’m hoping the other side goes a lot faster.
@danieljoseph2493 жыл бұрын
Common problem. MINE IS A 2018 AND HAS LEAKED 3 DIFFERENT TIMES ON BOTH AXELS. COVERED UNDER WARRENTY. KEEP CLEANED OUT WITH AIR COMPRESSOR. DIRT GETS IN THERE
@donaldstrishock3923 Жыл бұрын
A very common problem with these and other brands. The whole problem is;= the front axle is getting "CRUSHED" from the loader being OVERLOADED. Rear wheel ballast is the MAIN problem, sinse it transmits the WHOLE WEIGHT of the tractors ballance point of the front axle. With ballast weight BEHIND the rear axle it "levers " weight OFF of the front axle. These front axles seals (fixed for others) are my worst nightmare.
@Bigmac41288 Жыл бұрын
Does anybody have a part number for the seal or a cross reference number to look up at local auto supply stores?
@matfordfarm77912 жыл бұрын
I have a 2017 ck4010hst my exact seal has gone, what is the part number for it, or sizes. Thanks
@MrKelseyB3 жыл бұрын
There was no o-ring seal because the paint was what was sealing it from the factory.
@ryankovacs7573 Жыл бұрын
Where can I order the new seals and how much are they?
@eddynelson69823 жыл бұрын
I feel like he would still be talking without camera.
@2010mannw2 жыл бұрын
I’m at 4:18 and this video looks good but the beeping (I assume smoke detector) makes me want to chop my ears off lol
@assyholey42242 жыл бұрын
run to your safe place.
@madtater59482 жыл бұрын
my kioti tractor has 82 hours and started leaking at the front axle on both sides
@josephdimas-xk2yf Жыл бұрын
What’s the part number on that seal
@miketurnblom6700 Жыл бұрын
What the number for the seals I have the same tractor
@dalecollins9305 Жыл бұрын
Word to the wise - change all the bearings - not just the bad one...
@johneldridge2795 Жыл бұрын
How did you get the bearings to move back up?
@luckyandy76 Жыл бұрын
Mine moved really easy with minimum pressure. I used a screwdriver tip and just pushed them up. They didn't move very far but they moved plenty far enough for me to get the snap ring back on.
@kahvac3 жыл бұрын
I wonder what caused the seal damage ?
@luckyandy763 жыл бұрын
Me to. I was told its a common failure in tractors. Don't know if that is true or not though.
@donaldstrishock39232 жыл бұрын
These little twacters are not industrial rated fer the loads that are put on the "almost flimsy" front axles. The loaders are almost too powerfull, with compounding-leverage over the front axle the stress is horrendous. Fixed this befor on multiple makes & models. One issue stands out,that they ALL had in common----- little on no rear axle outbound weight leverage. The rear tires LOADED or wheel-weights is no help for the front axle. A heavy weight box, back-hoe, or heavy 3point implement sticking out there way back REALLY helps for the "ocassional" full loader capacity. The little "clip" that holds these together is almost a miracle, along with the tappered bearings & the Very Expensive seal ( it's part of the "bearing-action" too). Just keep the front weight down & keep-er out of 4wd or get a bigger TWACKTER.
@donaldstrishock3923 Жыл бұрын
These "little" compact tractors are "tortured" in their 65 hour per year lives. This "oil-seal" ( Realy fatigued& cruseded bearings) problem happen s ALL THE TIME!!! Have fixed many ( all brands) for my associate's; but NEVER MY OWN !! The Loader work= Extreame compound leverage when rear tires are LOADED= happens evey time!!! By using the 3point with "out-board" balast this technique "leverages" Weight OFF of these flimsy front axles to the Stonger REAR AXLE !!! Just so happens that the loaders are really TOO STRONG for Tractors under 45 horsepower in 90% of cases. This New "miricale wonder fluid " is KILLING little "TWACK-TER s", by enableing them to "safely" picking up MORE Than they SHOULD. Balast is important; just use "3point counter-weighted leverage" to save your front axle& forget the Expensive " Slime-rim-guard". Thank you Sir for the Excelent vidio ( & Comedy).Best wishes with all your endeavours.
@fordnut3722 жыл бұрын
Just did mine I’m still hoping my snap ring is in all the way, lol
@jonathand44542 жыл бұрын
Do you know the part number or o ring size?
@roostercoggburn74363 жыл бұрын
Wouldn't that seal be covered under warranty?
@luckyandy763 жыл бұрын
They have a 2 year warranty on the basic tractor parts. By the time I noticed it leaking and called the local dealer last fall I had missed my cut off date by about a month.
@roostercoggburn74363 жыл бұрын
Good to know! I bought a CK2610SE Cab last august. I thought everything was covered for 6 years. Thanks for responding!
@warrior4-u3 жыл бұрын
2 year “bumper to bumper” warranty, 6 year power train warranty on Kioti.
@madtater59482 жыл бұрын
@@warrior4-u I thought the front axle was part of the powertrain
@caliguy150010 ай бұрын
They have a promotion from 2018 to 2024 I believe. They give you an extra 2 years on the power terrain warranty. I bought mine Dec 2018 and the front seals just started leaking. I contacted my dealer and they verified it is covered. Taking it in for repairs in 2 weeks.
@Patriot-pq1ku9 ай бұрын
Shouldn't that be under warranty
@justind141610 ай бұрын
The beeping is driving me nuts
@daleolson35067 ай бұрын
Clean before you work
@johncrites58159 ай бұрын
whats the damn beeping?
@prevost86862 жыл бұрын
Kioti still needs to tighten up their QC.
@BS.-.-2 жыл бұрын
Thst is possibly the worst location for a steering cylinder and its hoses to be.