Caterpillar C-10 Diesel Engine Tear Down to Bare Block

Рет қаралды 200,854

Жыл бұрын

Tearing down a 10.3L Cat C-10 diesel engine and cold starting a junk 35 ton Cat haul truck.
Contact Email: kt3406e@gmail.com

Пікірлер: 451

@ictdpowerstroke4591 Жыл бұрын

Finally the worlds most underrated channel is back in action,,,,he does great work,,,very glad he’s making another one of these vids

@frankwallace5174 Жыл бұрын

couldn't have said it better myself 👍👍👍

@ictdpowerstroke4591 Жыл бұрын

@@frankwallace5174 thanks bro

@charliehellard6135 Жыл бұрын

😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊

@charliehellard6135 Жыл бұрын

😊😊😊😊😊😊😊

@charliehellard6135 Жыл бұрын

@@ictdpowerstroke4591 😊😊😊😊😊😊😊😊😊😊😊😊

@richardflagg3084 Жыл бұрын

You made it all the way to the 40 minute mark without calling something a piece of sh*t! Great video as always.

@natalieventrice2240 Жыл бұрын

🤣 That's 🤣 funny 🤣🤣🤣🤣😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂

@haloondrugs1173 Жыл бұрын

Imma be honest, I kinda like how he calls everything a piece of shit😂

@richardflagg3084 Жыл бұрын

Me too!!!!

@joeryan1793 3 ай бұрын

I like when he got out the good ole NB#2 when he pounded the oil pump off.

@benbirkigt493 Жыл бұрын

Your wealth and vast knowledge of cat engines is absolutely amazing I really look up to you and your expertise

@tihspidtherekciltilc5469 Жыл бұрын

Best hour I've had in a month. You sir deserve everything good in life and as a non diesel inclined person I really appreciate the lessons.

@uTube486 Жыл бұрын

Not only that, he's a great video editor and willing teacher.

@295walk Жыл бұрын

@@uTube486 Indeed

@williamstamper442 Жыл бұрын

I ain't but 8 minutes in and this engine is clean compared to what I'm used to. I know you said you need it for parts but dang there are alot, if not all the parts coming off of it need to go in a box for future use. It bothers me a little bit just letting bolts drop but I'm sure you recovered them instead of sweeping em all up and chucking them in the trash. Bolts are sometimes hard to come by when it's crunch time and going back together with a project. As a mechanic 53 years old who is down and out on disability with my health failing more and more daily, just watching you tear this down is a form of therapy to me. You don't post often but when you do it's always a watch all the way thru kind of day.

@WilliamMulligan Жыл бұрын

I've got boxes and boxes of bolts. I never seem to have the right one!😀

@alittlebitofeverything5090 Жыл бұрын

I was waiting for a funny statement you make as always, "I just don't understand people's fascination of putting oil filters on with a 6' breaker bar." Hilarious just so you know!

@scottperine8027 Жыл бұрын

If you love anything connected to CATS and what they really do then look no further,this guy knows more about them than CAT.

@metrickarma Жыл бұрын

One of the best on KZfaq, the knowledge you have is always amazing. Humor is right on point

@rodrod383 Жыл бұрын

greta would like to thank you for all you do to recycle these old engines and machines and thus saving the earth from having to give more resources to make newer unreliable junk

@diesel4life636 Жыл бұрын

been watching your videos since you started and only ever worked on my own diesel trucks 7.3 and a 12v. i always dreamed of becoming a diesel mechanic when watching your videos and a couple of months ago that finally happened. tons and tons of thanks to you for all the knowledge i gained from these videos, keep doing great work!!!

@yowunpansilu Жыл бұрын

Hi I need your opinion ; I'm from a third world country and i'm planning to enroll on a course from CAT since i'm interested in this subject. It costs a good amount of money. Is it worth it? What should i follow hydraulics or engine repair or both? Are there plenty of job opportunities for mechanics? If you have suggestions please let me know. Thanks

@b.k.sautomarinedieselrepai5143 Жыл бұрын

@@yowunpansilu engine repair is always crucial. Hydraulic repairs is always needed as well. For Instance if you were working on mining, towing,or some type of off road equipment...it would be wise to be well studied in both .

@Rayden440 Жыл бұрын

@@yowunpansilu I don't know where you live, but in places like USA and Canada they will hire you on the spot if you can prove training from CAT and knowledge in engines, heavy duty semi-trucks or heavy duty hydraulics. In Canada (where I'm from), if you successfully complete the apprenticeship for 421A or 310T, you're looking at jobs that easily pays over $150,000 CAD a year (that's without much overtime, if you hustle and put in more than 40 hours a week your pay is much higher than that). I would consider relocating to US or Canada if you can, the pay difference is way too great to ignore. There's a huge shortage of highly skilled technicians, and they just about hire any dimwit that can hold a wrench.

@40beretta1 Жыл бұрын

hearing that CAT turbo whistle is music to my ears. Diesel are just well build and so Durable

@briannewhouser154 Жыл бұрын

As always, thank you for taking us along, when someone is good at what they do it’s always interesting to watch them. Looking forward to seeing your next video.

@elbertfreeman8124 Жыл бұрын

Another 45 min. well spent twisting wrenches, get a kick out of it thank you again! Great content.

@aaronb6727 Жыл бұрын

Ah. A very quick 46 minutes. Another great video, was happy to see the notification for it. Thank you!!

@dmcdow Жыл бұрын

What a relief to see your videos again. Please post more. We know it takes a lot of time, but they are greatly appreciated.

@dirtfarmer7472 Жыл бұрын

Thank You Sir. I appreciated your video. I had a 2007 KW early model, when I sold it it had 1,128,000 miles we’d never been inside the engine

@nathankirschbaum3856 Жыл бұрын

One of the few channels worth watching.

@baileycoalson3231 Жыл бұрын

Never fails. Every video I learn something new.

@turbobus6731 Жыл бұрын

The only reason they put the filter on with a 6ft cheater is because they didn’t have an 8 ft.😂

@Daves_adventures4315 Жыл бұрын

Can’t remember what I was looking for when KZfaq put you on my suggestion list but I’m glad it did!

@danielhofer7386 Жыл бұрын

Great video. I had that sensor go out on my 1994- Cat 3406E model back in 2010 just a few months after I had a complete out of frame overhaul done. was loading grain under the spout had one pile in trailer & was to move to rear hopper & she just quit. Had no idea what it was. couldn't get it to start. Ended up having towed to a shop thinking was a serious problem & all it was this timing sensor. If I'd had known that I would have had a new one put on when I overhauled the motor. I was good for putting things on before it needed it as a prevention of a breakdown & loss of time. Time is Money.

@zonie1953 Жыл бұрын

This channel is great ! No senseless jibber jabbar or annoying music ! Only speaks when he has something important to say ! And when something is a pos , its a pos ! 🌵

@AJ-sh8uv Жыл бұрын

God how I love your channel. I've seen you tear apart the rear axle on a big ass dump truck. I'm watching you tear apart a HD diesel engine. I'd absolutely hate to be DOING the work you do, but I really like seeing you do it. You're a master at what you do. Big machinery doesn't intimidate you one bit. Your channel is a golden nugget

@robertwest3093 Жыл бұрын

This is the most underrated channel on here!

@2491kridge Жыл бұрын

In case you’re wondering, you’re one of the very few KZfaqrs I genuinely get excited when I see a new video pop up, sit down on my day off relax and watch some quality content

@sjohnson1776 Жыл бұрын

Fun video for me. I learn from watching you tear stuff down and rebuild. Good stuff!

@Calvin-xp4qp Жыл бұрын

Hell yeah, KT3406E is back! Love the vids man, thank you

@12345....... Жыл бұрын

More uploads please. No pressure, but us fans will watch it

@Steven44488 Жыл бұрын

A true professional 👏

@wraithette01 Жыл бұрын

Thank you for another great video! Extra thanks for the bonus cold start!!

@big_mike_nyc Жыл бұрын

I can NEVER get tired of these videos and learning from the knowledge this dude has!

@DieselProductions95 Жыл бұрын

Yes thank god hes back in business !! Keep the videos coming aa

@danielpullum1907 Жыл бұрын

I continue to be amazed at how old diesels start and run compared to old gas engines. I watch two of three of you guys that work on them regularly and you all have your little tricks.. I like the level of your analysis and dialogue enough to hold my attention.

@86FxBdyCpe Жыл бұрын

Even though I will never own a vehicle or piece of equipment that uses these CAT diesel engines, I absolutely love this channel. I'm always amazed at this young man's knowledge of this stuff, his incredible work ethic and attention to detail on the rebuild. If I ever had to have one rebuilt, there's no question where it would go.

@dougkratz5269 Жыл бұрын

You should buy one and follow along at home😀

@taylor11089 Жыл бұрын

@@dougkratz5269 Doug I have Enjoyed your Channel and the Content that you Post on their as well! Great Pride in your Trucks/Equipment for your Business! It Definitely Inspires me!

@dougkratz5269 Жыл бұрын

@@taylor11089 thank you sir! I admittedly have not posted in awhile I've been pretty busy and got sidetracked. Glad you were able to find inspiration. Best wishes to you

@alexmaccity Жыл бұрын

I'm still mad about you whipping the piss out of those old 2 stroke Detroit's, but here I am.. back watching...

@DougsHomestead Жыл бұрын

Love it!!! Best diesel channel on the web.

@TheMajictech Жыл бұрын

The familiar meeeep meeep of ancient cat equipment warning buzzers. I work on a wide mix of this cat stuff almost daily. From old articulating trucks, scrapers, and dozers, to brand new gps dozers and excavators. Love them all.

@patrickmoran8790 Жыл бұрын

Hey brother, thank you for many words of Cat wisdom that I sometimes use at work, a lot. On that oil filter stuck problem, the person that put that oil filter on doesn’t know a much about how lubrication is important, especially on oil filter gaskets.

@transmitterguy478 Жыл бұрын

I've seen hundreds of heavy equipment in use over the years and it sure is nice to see how the engines are put together. Keep up the good work and cool videos.

@peteparker7396 Жыл бұрын

3406E! I could be wrong, but I believe most D6R’s and T’s have the C-10 in them. They are tough little engines.

@Larslegos Жыл бұрын

5:10 When you have to change your tire on the side of the road 😂 It was really cool to see a full teardown! It's always good to see a video from you

@mavmav6555 Жыл бұрын

I can't believe how clean your shop is! Organized, clean, plenty of room, sweet set up. Thank You for the video!

@davidellis279 Жыл бұрын

Looking at the oil gallery that engine was super clean inside which shows the quality of the maintenance and oil used, these are great engines,I did over 250,000 miles in one without a single issue,brilliant engine I really miss those days, it’s been 17 years since I was medically retired but still miss those days, 325 bhp of sheer guts, at 32tons gross in an eight wheeled tipper it was Never short of power.

@bryanmoreno3331 Жыл бұрын

Man we need videos at least once a week. They’re too good.

@scrotiemcboogerballs1981 Жыл бұрын

Thanks for sharing good to see you are still kicking buddy

@lynndraughon6961 Жыл бұрын

Enjoyed this video, always look forward to the new ones.

@falcon8553 Жыл бұрын

I'm always amazed at these diesel engines. They run!

@falcon8553 Жыл бұрын

I’m looking forward to the follow-up video. Truly enjoyed the break down on this first video. Thank you.

@johncoleman5128 Жыл бұрын

Glad to see you're back doing your videos, miss your expertise on CAT MOTORS keep them coming my friend 👍💯

@leonardbartley5670 Жыл бұрын

Glad your doing videos again, Hope there's more coming.

@joeyjustin6895 Жыл бұрын

HELLO ,,, ALL CAPS JOE HERE. I MEAN IM REALLY HAPPY YOU MADE THIS. YOUR LIKE MY HERO. BUT GUESS WHAT. SOUND IS MORE IMPORTANT THAN THE VISIUAL. AND YOU DONT TALK IN IT. I WANTED TO WATCH THIS VIDEO WHILE IM AT WORK WORKING ON THE BENCH AND I CAN'T BECAUSE YOU DON'T TALK. BUMMMMMER. CAUSE I REALLLYYYY LIME YA. YOUR DEFINITELY MY HERO

@elljay4587 Жыл бұрын

As a die hard series 60 fan , cat's use of bosses over roller bearings on the gear train is a much better design. Great vid. I own a c12 so this was very informative.

@KT3406E Жыл бұрын

This is one of Cat's cheaper designed engines. It doesn't compare to a 3406E family engine, but the C-10/C-12 family is still as good as any other 10-12 liter out there.

@Impossibilty232 Жыл бұрын

Love to see some action of these machines working!!

@blainefyson880 Жыл бұрын

Great video. Your wisdom and skill is a pleasure to watch. Learn so much. Thanks

@darrollconley1350 Жыл бұрын

Those rear covers a valuable, they a notorious for cracking when guys let there compressor bolts get loose, and they are very time consuming to replace as you can see. Great video kT!!

@markae0 Жыл бұрын

Liked before watching,knowing it would be great!

@waltermacchiarella4221 Жыл бұрын

Absolutely love these videos. I was telling a buddy at work how much I love these and how much I learn and now I’ve got him hooked. Thanks man!

@Alpenglowoutdoors Жыл бұрын

Never knew what an oil cooler looked like. Great explanation.. so neat

@bagelsgarage Жыл бұрын

My boss has a c-10 in his service truck. Very good engine, has it turned up a bit. Always surprises people how quick it is on its feet

@batsonlogging Жыл бұрын

Sir, I love your videos. Thank you for making and posting your videos! Thank you for sharing your knowledge with us!!!

@billnlori3149 Жыл бұрын

Great video! That cordless impact has some balls!! The engine was really nice and dry on the outside.

@davidellis279 Жыл бұрын

Don’t know how many miles that engine had done but saying it was in pretty good condition must be the most understated statement of the year,that engine had very little wear anywhere and could probably have been rebuilt using new piston rings and Crank Bearings and a light cylinder hone to bed the new rings in and yes I’ve been rebuilding Diesel engines for the last 50years.

@sterlingdavidgrasssr Жыл бұрын

First one for 2023 , Damn i love watching you take these old things apart and putting them back together ? Iĺl never part one out are install one ,but sure love watching you kick there Ass ? You just don t give a damn ,thats what makes your videos special , Like starting that old 3406 in 20 degree weather . Iĺl be watching every damn video you post for 2023, so . Thanks and be safe with that heavy steel ? See Ya

@kerrygleeson4409 Жыл бұрын

Always very interesting learning all the time thanks for sharing your vast knowledge

@jjjj-uf4bw Жыл бұрын

Enjoyed watching as always. Looking forward for the next video.

@fredfeldmeier8228 Жыл бұрын

Excellent job and joy.. Thanx..👉🚜👌

@DirectCurrent4u Жыл бұрын

I really appreciate your content and wealth of information. Keep up the great work and stay safe.🙏🏻👍

@CleetSquad Жыл бұрын

Very interesting to see that there are no retaining clips on the piston pin and I'm guessing the concave surface is so it just doesn't marr the sleeve with an edge.

@crwray Жыл бұрын

Your videos are the best! Thanks man!

@Daniel_cheems Жыл бұрын

Happy New Year! That's some impressive work right there for a first timer...

@thepubliceye Жыл бұрын

I don't know why I watched this, it must be your excitement and enthusiasm.

@bensmith6051 Жыл бұрын

Hey man, good to see you back in action. You do some damn good videos. Be safe.

@jeffbronowicz3264 Жыл бұрын

what a great video, you never let the viewers down, just like that 3406e, 👌 great beginning to end!!

@donbrashsux Жыл бұрын

More runaways .. KT is King at this

@haroldbenton979 Жыл бұрын

This series of engines along with the 3176 was designed to complement the 3406. It was designed for lightweight requirements of certain OTR industry requirements. It found a large niche in the bulk transport fleet and beer hauling fleets. I drove a 98 KW with the C13 that had 430 hp and it did fairly well in the mountains. The 3176 was not as good when it came to Jake brake performance but then again it was also 1350 maximum torque so it couldn't really get up the hills.

@Failure_Is_An_Option Жыл бұрын

@George We know you sure didn't.

@dominickstratioti3980 Жыл бұрын

@George relax meat rider

@terratrodder Жыл бұрын

@George We can all learn something regardless of the experience we have, but Harold's comment is for all of us who don't have any experience with that engine in a working environment.

@taylor11089 Жыл бұрын

@Harold…If it was a 1998’ Model Truck, it had to be a C-12, 430 HP was the Most that you could get along with Up To 1,650 Ft LBS Torque. Cat C13 Model Motors didn’t come out until 2005 Model Trucks, they were also Twin Turbo Engines and had Some Problems. There was also the Cat C-12 Bridge Motor that was 2003-2004 Model Trucks (similar to the Cat C-15 Bridge Motor that was after the 6NZ Model, but before the Cat C15 Models). The “Bridge Motors” which were Single Turbo Interim Motors with Some Emission Controls, before going to Full Blown Emission Motors that Started in 2005, such as the Twin Turbo Model Motors C7, C9, C11, C13, C15, & C18 Model Motors. These Motors were Replacements for The Single Turbo Model Motors 3126, 3176, C-10, C-12, C-15, C-16, & 3406E Model Motors. If the C-10 is as Good as the C-12, C-15, & 3406 Model Motors that I have had Experience with, then I am sure that it is a Good Motors. The Cat C-10 falls into the Same Class of Motor as the Cummins M11/ISM Model & Detroit S60 11.1 L, just like the Cat C-12 falls into the same Class of Motor as the Detroit S60 12.7L Model, just like the C-15/3406 falls into the same Class of Motor as the Cummins ISX/N14 and Detroits S60 14L Motor. Cat C-10/3176 we’re Great Flat Land Motors for Bulk Hauling, Car Hauling and Local Drop & Hook, but it would have to be Really Geared Low for The Mountains & 80,000LBS. I wouldn’t want Less than a Cat C-12/S60 12.7L for the Hills, even then the Truck would still have to be Geared Low with Maximum HP & Torque, 13 Spd’s & Jake’s (ideally a 14.0L, 14.6, 15.2, 15.8, or even a 18.0L Motor).

@jasonspringett5367 Жыл бұрын

I Absolutely love when you make videos! Your sarcasm and knowledge on these cat engines is amazing!! Love watching you work and seeing how these engines gone apart and go back together, you def have some talent my friend!! Keep the videos comming if you can. You are one of my favorite channels on you tube!! Grsat job buddy, hope to see another one soon! Thank you for the time you put into these videos!!

@northwoodacres4114 Жыл бұрын

Sure have missed your videos. Hopefully we will see more in 2023. Thanks.

@timk.9827 Жыл бұрын

Very good vid, Your sure have alot of knowledge on cat motors. I ran ran alot of cat equipment for over 30 plus years but never had to work on them, Just ran them, Those engines are brutes for sure, Thanks for the vid.

@fatzlebowski1549 Жыл бұрын

Love these vidyas ya old minty prick! Keep em coming. Old CAT engines never get old they just get rebuilt.

@overkillaudioinc Жыл бұрын

NICE video! really enjoyed that! More of these please!

@jeffdelano5084 Жыл бұрын

Thanks can’t wait to see your next one good job

@natalieventrice2240 Жыл бұрын

Im 11 and I like cats but Detroit diesels are my favorite and they sound badass

@silasmarner7586 Жыл бұрын

Your finish work on your rebuilds is exquisite.. as evidenced by how well they run !

@JBAutomotive794 Жыл бұрын

Seeing how much more stout the injector valve train parts than the engine valves tells me they take some serious force to push that fuel into the motor. Wild. 🍻

@frankdeltoro2525 Жыл бұрын

Have been waiting for another video. Please upload more! Need to see some new builds !

@CAT-ow8oh Жыл бұрын

KT I appreciate every time you upload

@tuju- Жыл бұрын

This is actually the first video where we see him doing stuff, previously he just filmed stages and explained what had happened between the clips.

@JJ64018 Жыл бұрын

Enjoy the content and appreciate the time spent making it and explaining everything

@nickburchfield329 Жыл бұрын

Id like to give you a thanks for the videos you put out. Believe it or not ive learned a hell of a lot off you ive been able to apply to my work

@i_fudg3d_my_pants Жыл бұрын

Thank you for the great video! Keep them coning!

@TheDaf95xf Жыл бұрын

I’m no mechanic but I do drive DAF truck in the uk 🇬🇧 with a 480 paccar engine lol 😆 I think you make the best engine pull down videos ever 👍🏻🏴󠁧󠁢󠁥󠁮󠁧󠁿

@nibachoable Жыл бұрын

The legend returns 🐐45 minute special!!!

@ictdpowerstroke4591 Жыл бұрын

Oh yeah,,,just a minute lmao

@berty1422 Жыл бұрын

The Oil filter and Starter bolt being wrenched up tight. You can tell the dude who serviced that vehicle was NOT very bright, but he could lift heavy things...

@critterg8493 Жыл бұрын

Glad your back love your humor and work

@bxb00t90 Жыл бұрын

if you keep making videos like these you'll be at 500k-1mil subscribers in no time $$

@drmyronbouray 5 ай бұрын

You make my back hurt!!! Sorry I can’t work like that anymore.

@duncandmcgrath6290 Жыл бұрын

Between Deboss ,Adept Ape and this channel , I've learned so much about Cat diesel.

@reevertransport3979 Жыл бұрын

I've owned 4 CAT diesels. 3406B OT-4444 arraignment setting 400hp. a 5EK 3406-435hp. a 2WS 3406 550hp and currently a 1LW 3406E 550hp. All were great engines. The B model 400 was the hottest one

@eggnogfrog Жыл бұрын

I always like your videos and your laid back commentary.

@jimsvideos7201 Жыл бұрын

Hey man happy new year! Thank you for taking us along on this; today I learned that a Cat oil cooler is just about the right size to be a model steam engine boiler... 🤔