Kubota LX2610 Hydraulic Relief Valve Shim Kit-More Hydraulic Pressure!

Рет қаралды 3,255

Жыл бұрын

Here is the link to the kit I used. Make sure to put in your tractor model when you order. Shipping was fast and a easy process.
www.bxpanded.com/pressure-tester

Пікірлер: 9

@alittlebitofeverything5090 Жыл бұрын

Neat upgrade to the hydraulic power. My Kioti ck2610 has an adjustment at the base of the fel control lever that's an allen head. It was cut way back from recommended pressure. When adjusting it, literally an 1/8 to a 1/4 turn will increase it around 800psi so I had to be careful!

@atvrepairsandmore2482 Жыл бұрын

There might be another way to do it on the Kubota but this is what everyone recommended

@alittlebitofeverything5090 Жыл бұрын

@@atvrepairsandmore2482 The price is right regardless!

@RiverValleyLandscaping Жыл бұрын

The kioti has an adjustable relief valve that’s why, kubotas typically dont so the shims are necessary

@alittlebitofeverything5090 Жыл бұрын

@@RiverValleyLandscaping Thank you

@thegreatnorthwoodswithbb2863 Жыл бұрын

I have the same tractor plenty of power in the loader it's a 25 horse tractor not a 60 horse tractor... Jack the pressure up there goes your warranty... My opinion want more lift capacity by a bigger tractor first time

@atvrepairsandmore2482 Жыл бұрын

I’m probably going to sell it. The loader is a piece of junk and all I did was bump the pressure up to where the factory pressure is supposed to be. I also can not stand the hydrostatic whine from this thing. Just seems like a cheaply built tractor. The cab is nice and well built and the engine is great but that’s really the only things I really like about it. I just expected more for a tractor with a $30k msrp. Probably going to be my last Kubota. I love their engines but that’s about it.

@thegreatnorthwoodswithbb2863 Жыл бұрын

@@atvrepairsandmore2482 hydrostatic wine I agree is annoying don't understand the loader thing mine has plenty of power..... The mx6000 is awesome quiet smooth a lot of power like a Cadillac of tractors...$60,000 price tag

@atvrepairsandmore2482 Жыл бұрын

@@thegreatnorthwoodswithbb2863 I just see the loader frame flex really a lot when lifting stuff up and it really concerns me I am going to tweak it. I also somehow managed to bend my hydraulic cylinders on the loader just slightly. It still works fine but is kind of annoying since I am not hard on the tractor, that was before installing the shim kit. I am a lot more cautious with the loader now. Also some of the fittings on the loader have hydraulic oil residue. Not quiet a leak but you can see where the dirt that sticks to it is wet. I also noticed under the tractor it is getting wet from something leaking. Not sure exactly what it is yet as I have not had time to mess with it. Just noticed it the other day.