You do have to spend some time setting the saw up... blade, fence, etc. But once done, the saw is great. Fairly compact which is Nice kzfaq.infoUgkxXh-4_3-ZT1fFWP91ZV7iVqzElr0lEb-a I did get an Incra Miter Gauge which takes some setup as well. The stock miter gauge can be adjusted in the miter slot with a little painter's tape... this tightens up the side to side play a lot.

Dude, thank you so much for this video! I'm in the process of upgrading from a contractor saw to a cabinet saw, and I've been considering the 3 or 4 brands that everyone does, and I was leaning towards the Laguna F2. After watching your video (and reading some reviews about their customer service), I have absolutely removed Laguna from my list, and I REALLY appreciate your calm, fair review of your real world experience.

I have been very close to pulling the trigger on the Laguna F2. Staying away now thank you for posting this video. Harvey it is !

Thank you for your honest opinion. The fact that the company seems more focused on getting saws out the door than taking care of customers speaks volumes in todays corporate greed.

Dang! I had just about decided to upgrade my 1953 Craftsman King Sealy to a Laguna Fusion 2 but after watching your video I’m changing the plan here. Thanks for posting and sorry for your trouble. I hope you get this issue resolved soon.

I’m sitting in my hobby workshop,here in the UK. I’m waiting on a replacement capacitor for my new table saw. Can’t really do much without this machine,in fairness the suppliers are doing their best,I’ve spoken with their tech people,they’re good,genuine blokes. I’m being patient.

Thank you for the honest table review. I also had the f2 on my radar, even with a 20% off coupon from rockler I’m not going to get it. It’s really rare these days for someone to share on how a purchase went wrong.

Years ago I was in the market for an 18" bandsaw to resaw with. My research about attributes led me to a Laguna saw. Further investigation, much like I'm doing today, I ran into a bunch of crappy customer service reports. I ended up buying elsewhere, and have enjoyed that bandsaw immensely. Now I am looking to upgrade my TS, and was looking really closely at Laguna F3. Once again I'll buy elsewhere after seeing your review, and others stating the customer service isn't any better, actually it sounds like it's gotten worse. Thanks for your review.

Thanks, you helped me choose between the saw stop and laguna.

Hey, so pleased to see this video, I have the exact same saw with the exact same problem. It is really really frustrating! and I know the feeling of only having your track saw to get work done, absolute nightmare, I think I am going to be buying a Felder panel saw of some sort, their customer service seems to be really really good.

Thanks for the heads up. I was going to get an F3 and a band saw. Laguna are now off my list. 👊🏼

Thankyou for the video, I do have a Fusion3 in my shop based here in Northern Ireland Uk for maybe a year and so far no problems, it's a good saw, flat and cuts straight, I would have loved a soft start, but apart from that so far so good, I hope you do get sorted out and up and running again buddy, kind regards Louie

Whelp I guess I’ma keep on shopping for a new cabinet saw. Dang it I really likes the F2 too. Thanks for sharing and saving me from a future headache my boy.

I have a Laguna fusion 3 for 6 months, 20'' planer 1 year and 8'' jointer for 24 months. Unfortunately, I can't comment on customer service since I have not had any issues with my tools. I really love the way my fusion delivers. They have a Sawstop where I work in the day time and I thought of getting one but ended up with Laguna since I did not think the price difference was worth it. Sorry you're having so much problems getting your parts but you will appreciate it afterwards.

Wow, I have been doing my research for my new table saw and Laguna was my pick since I already have Laguna Lathe and Laguna Bandsaw but this is making me rethink Sawstop over Laguna.. Thanks for the video

Was looking into Laguna but you just saved me from a headache.

I was buying one of these saws. I am not now. Thanks for video.

Wow man! I’m so sorry to hear about your experience. I have a Laguna Bandsaw that I love and was literally just going to purchase the Fusion F3 before I watched this video. I need to avoid Laguna, clearly. I went to purchase one last week at a local woodworking store and the sales rep talked me out of it. Doing my homework today to try to debunk their criticism and it appears they gave me proper warning. I’m sorry for the hassle and set back it caused you but thank you for sharing so others don’t have the same results. Hope you find the right saw for you!

Great video dude! Keep up the nice work!

I came REAL close to buying a Laguna F2 because it was in stock and almost fully assembled. After seeing this video I took Laguna off my list. Let's hope Laguna watches these videos so they can up their game. I'm going with a Harvey cabinet saw.

I have just had my first issue with my Laguna saw. I have yet to take it apart, but sounds like a similar failure. In actual use hours, I have very little shop time on this saw, so this worries me to the overall quality. I will see if I have the same experience, as you mentioned that seems to be a draw back for Laguna. I have a Grizzly band saw and found the customer service to be excellent. I think Grizzly is my nest table saw. Thank you for the video.

Thanks for the info! Love the content

Thanks for your feedback. I'm evaluating a few brands and was going to purchase a Laguna F3 tomorrow. Not now!

Sorry to hear about your saw and the horrible customer service you are receiving. As you said, stuff goes wrong and things break and I don’t care what company we are talking about, it just happens. The true measure of a great company is how they respond when these things happen. Laguna definitely falls short. Needless to say, I won’t be looking at them any more. Good luck on whatever you decide to do! All the best!!

Thank you for review !

Best thing in your shop, is the painting of the GSP on the wall

Great info , been looking to upgrade my table saw and now really leary of buying a Laguna. Looks like a Saw stop might be in my future. In Canada we don't have the selection you have in the states. Mainly due to shipping. Great info, Thank's.

What a timely video! I'm currently in the market for a new saw and was looking at this Laguna model, a SawStop, or a Harvey Alpha. I can't believe your saw died on you so quickly after getting it, and how poorly the Laguna reps are dragging their a$$es on this. Guess I know which one I won't be getting... Hope you get good news soon!

Thank you for the video and the review! I was leaning hard towards the F3 but will look at a more reputable brand.

Wow. I hope you have better experiences going forward. Crazy that this thing croaked so fast. Hope you get a sawstop

Great video, Thank you for reviewing tis Table Saw. I am in the process of setting up my shop. and don't have the money to use. Keep making videos and I will continue watching and enjoying. #TSGA

Thank you for your review. I’m in the process of looking at upgrade options from my DeWalt job site saw and am very close to getting a 3hp Saw Stop. Laguna was the next option and your review tipped the scale to stay away from Laguna. It’s a shame but customer service is important and having a saw down for as long as yours has been is simply unacceptable. Hope your saw has been sorted out since this video.

I bought the Laguna fusion 1 , the issue was the wing holes did not match the holes on the cast iron table. So I called customer service and they were horrible, the tech guy who I spoke with told me to drill a new hole. So I said no , I'm not fixing your mistake. You have bad quality control you should have checked it before shipping it out. I don't care if they are backed up in orders . Ide rather have them do what they advertise on KZfaq, a good product. Rushing orders never come out good. So I returned it. Mind you, the day i got it was happy , unboxed it, and I noticed the problem , put it back in the box and got rid of it. Took it back to the dealer I bought it from. The certified dealer gave me better customer service then Lagunas BAD CUSTOMER SERVICE.They took back the table saw, didn't give me problems and gave me my money back. Thank you dealer.

TSGA That’s a pretty slick setup!

I appreciate the video. Been waiting for 5 months for stock to arrive in Australia. Still, no word on stock and to add to my frustrations we have had a 10% price jump. Now I see your video and I am definitely looking at other brands. Sadly we are very short on quality affordable saw options down here, but Laguna just fell off the list.

I also own a Fusion 3 and I will agree with you on the customer service aspect. Mine was delivered with a couple small issues, there was a small chunk out of the melamine top for the wing extension (I have the 52" version) and the fence tape measure is out so much that I can't adjust it properly, I have it set to exactly 1 inch out to at least be able to use it for now. Took a few days to get customer service on the phone but the guy I spoke with was great, said he'd send out the new parts right away and then... nothing. Parts were supposedly shipped out in June. It's September and if they shipped them, I have no idea where they got sent because I never received them. Granted, my issue isn't nearly as bad as a failed motor mount but you'd think even the easy things they'd try and get sorted out.

Thanks matey I was considering the F3 but not any more 👍.

Thankyou for your informative review

I too am considering upgrading to a cabinet saw. I’ve only been able to see the Lagunas in videos, my local Rockler doesn’t stock them. I’ve looked into the SawStops quite a bit and I’m impressed by the quality and heavy duty nature of their builds - not to mention the safety. Hearing your issue with the motor mount is disturbing - it’s so fundamental. Sure SawStops are way more expensive, but I’m coming to think they are a way better bang for the buck.

Thanks for the video. Sorry you are having such trouble. I was about to buy @Laguna Tools saw but I won't buy anything from a company that won't take care of their customers. Based on the comments so far, sounds like you aren't alone.

I am sorry that you had to go through this nightmare. So frustrating! Being able to see it from the future and knowing how it all turns out makes it easy to say, "all is well that ends well " but while usually are living through it...not fun. #TSGA

Excuses are just exactly that excuses I appreciate your honesty and understand your disappointment having a back up saw is never a bad thing but being a small business have money sitting doing nothing is hard I’m sure there service department could have taken the required parts off another saw

Sorry to hear mate, I am saving for a Harvey. Have the bandsaw and its been great

That really sucks mate,especially as you run a business as well. I feel your pain,paying a ton of good money and getting crappy customer service..It always works out alright in the end,and if it ain’t the end,then it’s alright. Try and remember that mate,all the best from Manchester,uk 🇬🇧 👍

Sorry to hear about your problem. I was looking at Laguna's bandsaw but after this... Will look a bit deeper

Harvey Alpha is what I went with and I am happy with it. I use my table saw to earn a living so I need it to work like it's supposed to, as you do bro.

Like many others, I was contemplating the F2, Sawstop 1.75 PCS, or Harvey Alpha... I ended up choosing the SawStop after watching enough reviews about Laguna and Harvey saws that simple had more negatives combined than the SawStop reviews did. I definitely paid more upfront, but I wanted a one and done saw. If I do outgrow the 1.75, I can get my power upgraded to 220 and just swap in the 3HP motor. It was just a little too costly to get the 220 upgrade and a SawStop 3HP, and from the reviews it sounds like that for the vast majority of people, 1.75hp is not going to leave you wanting.

Wow, what a mess. Current customer issues NEED to be addressed ASAP!!! I was thinking laguna was decent, now second guessing my thought process! TSGA. I am currently replacing my shop equipment due to COVID, crushing income last year. Sold off stuff to make ends meet now finally rebuilding and it feels good!!!

Sorry for your experience. I was about to buy 2 fusion2s for my company, but they are now off my radar. You HAVE TO support your current customers.

Just had the threaded end on my worm screw for my blade height adjustment fail. Stripped completely. Only had the saw for a year and a couple months now.

This is why I’m going SawStop. I had planned on getting a Laguna Bandsaw, although this definitely makes me rethink that… I’ve been hearing good things Harvey Bandsaws, and that TiN coating they offer on their bandsaw table is looking pretty good right about now. Thanks for the video, you’ve just saved me from potentially dealing with the same people, same issues just on a different tool

I started with a SawStop in my buying process. Glad I did now. What did you do with the Laguna?

The supply chain did have them backed up. I ordered my Fusion F2 in May and finally got it last week. I couldn't be happier with it. Stay away from Grizzly.

That is so unfortunate about your saw. I too, did a lot of research and drank the cool aid (got the SawStop). Have you looked at Harvey Alpha Series? That is a great saw too.

I was about to buy a Laguna F3 but after watching this i have changed my mind i am in the UK and if you have problems with getting parts in the USA it will probably be even worse in the UK.

Also, check out the Harvey saw. Looks similar and I see good reviews. I don't see the SawStop as an answer here unless you want to pay over the odds.

Thank you much for this video! I'm in the process of buying a Fusion 3 saw, and I've been waiting forever - it now seems it's been postponed until june 2022 (I'm from Denmark, so Long Haul....) I've seen the reviews, and heard about the poor service - hoping my Danish dealer will do a better job, if need be. I was wondering if you could provide an update - what has happened since your upload?

Thanks for this video. I was considering this table saw and sounds like this will save me a lot of heart ache and disappointment.

#TSGA it would be huge to have a table saw like that. I currently work at a small woodworking shop that most does farm furniture. I have definitely outgrown it and would really like to start my own business, but I’m poor and tools and nice tables saws are expensive haha

Resale on the SawStop i would imagine is also way better/tight to the retail price for the fit&finish, reputation, etc.

I bought a 10' x 5' CNC router from these guys which turned up with shipping damage. Parts fulfillment in TX took months to send correct parts and I'm still waiting for 1 part. Not sure I'd buy anything Laguna again to be honest!

Still saving up for a something better than my harbor freight saw. Very informative. #TSGA

#TSGA great video. I had been doing research on Laguna and Sawstop to upgrade from my craftsman 113. Grizzly is a very well known brand and would be an amazing upgrade.

I was just about to put a order in for a Laguna F2 for my garage to replace my hobby Ryobi table saw, but after seeing what you have gone through, I am definitely not ordering it now...

Thank you for the video. I was about to buy a Laguna F2 but I think I will go with a Grizzly because of the customer support issues.

I bought recently a laguna f3 table saw. I just want to now, how you attached a saw stop sliding attachment to laguna table saw?

How does the Saw Stop cross cut sled fit? Any issue I was thinking of doing the same thing. Thanks for any advice.

Where you at now with this issue? I was going to get the F3 but now not sure

That's f up . i bought a grizzly 3 HP table saw when they were cheap . i think i paid $ 1500 or so . it was incredible for that price . i also bought an 8 inch planer which arrived with a small crack in the cast iron base . not super serious . i e mailed a photo of the crack and they replied immediately and said they would replace it . i had to drive the saw to a shipping dock about thirty miles away and send the old one back .they paid for the shipping . very acceptable tools for reasonable prices and super customer service . It's a pity you are caught up in such a mess . good luck !

I have the f3 36" as well. No problems for me. Looking to add router extension same set up as you. so you bought the router extension wing plus small extension wing as well? How did it all bolt up lots of modifications? did the router dust box bolt to the bottom of wing or did you have to make a plate? Thanks

Hi! Would you Share what router table extension is that?

#TSGA - thanks for the video - always looking at better ways to use a table saw, especially a Grizzly G0691!

Appreciate this video. Thank you for your honesty in accurately communicating your experience. I was very disappointed to watch your "Laguna Table Saw Redemption" video. Clearly you have a price.

Did they ever sort it out?

Hello, do you recommend this machine? Do you have problems with hardwoods?

I was debating between Laguna and Sawshop. After hearing all the bad comments about Laguna I think I will stick to Sawshop. I might have to pay a little more but good customer service is important.

Is that additional extension wing between the table and router table cast iron? What did you use there?

Thanks for the video, i juat bought a fusion 3 and so far works fine, no issues. But if you don't mind, could you tell me what type of slinding table did you mount on yours? I'm looking for a sliding table to fit on my saw , but there is not much info for this around, and yours look awsome!

#TSGA sorry for your troubles, sad to hear about your issues.

I’ve looked into the Delta - the motors burn out. Laguna - broken motor mounts and awful customer service. Grizzly - too many plastic parts and also sloppy fences. Looks like I’m going to dig deeper into my pocket and get the SawStop. Yes, it’s a fortune. But I’ll have a saw that works!

Im in kc about the same distance you are from grizzly I own a 1023z first year it was made 3hp its never been used it is over 22 years old. I got a 120 volt 2hp jet in 2017 its a proshop II hybrid the saw works fine. Got it free. My son won it and gave it to me. I also have a porter cable fold down saw also 2.hp i use it the most its in the garage i can't set up the garage as a workshop, my wife thinks thats where you park cars??? If i was in the market for a good table saw id buy the sawstop. HARVEY is also Bridge city tools. Or aside from a sawstop id look into buying 5 in one Felder Or one of its off brands like Hammer. Yes they cost a lot But its a full workshop in one machine, and they have safety shut off like saw stop. They also hold resale value. You should look into it its more machine then the sawstop.

@hutchabodefarms126 Did the compass slide bolt right up or did you have to do some drilling?

Dude thank you for this. #TSGA

If the motor is still good I would have a shop weld on a new tab.

Any updates?

Hi. I ended up here looking for some more infos about this saw. Since now I've heard only good things about the laguna fusion 3 but I'm starting doubting ! I'm from france and I found only a seller from czech republic so if there 's any problem it might be a pain in the ass... Your setup looks really nice to use. I was thinking that the saw was lacking a cross cut system for panels and longer pieces of wood (the mini cross cut system really looks like a toy...).I see you found a way to add one. What is it from ? Same brand? How did you install it ? I'd be happy to know. Have a nice day !

what a PITA for you dude. I was considering an F2 wired for 220. That's off the list now. Back to G0123RL I guess.

Good luck with your new saw #tsga

#tsga, hoping to upgrade to a cabinet saw soon hopefully I win this and can use that money for dust collection

#TSGA Thank you for sharing your story... please keep us informed.

I was making enquiries about the fusion 2 & 3, really looking for a reliable machine, as my existing one is over 30 years old and thought I'd treat myself. But thanks for the balanced review, but will remove Laguna from my list.

Very helpful thanks for doing this! Now I just need to talk the wife into thinking she needs one #TSGA

Man, I feel so bumbed. I was about to pull the trigger on an F2 or F3 seeing there was no reason for me to actually go towards the Sawstop. My fingers just aren't ever near the blade and I'm smart enough to never wear gloves or loose anything, around a table saw. But customer service...that is HUGE when you rely on it for cash flow! Sorry about your experience man.

Im in the same boat my self... customer service is horrendous. Great saw when it was working. Rep told me they have very limited supply and are only worried about fulfilling new orders. They dont know when they will be able to fufill my part request. The rep told me i was pretty much better off buying a whole new saw. SO now im looking at getting another table saw. im thinking of just taking the plung and getting a Sawstop at least i know they have better saw and service. Its a damn shame too cause i invested heavily into laguna tools and this is how they treat there loyal clients. I will be looking to sell my other tools that i have. so if anyone is in IN area and want laguna tools hit me up. will sell mine.

I have a Laguna dust collector and had to call customer service on day 1 because it didn't work...I agree, the CS is horrid. I will never buy another Laguna product again.

Any update? I’m suppose to pick up my F2 Monday.

so sad, I have 2 laguna tools now and was considering the f3 next to finish up my shop. Now I am very hesitant. Really sorry about your bad luck. All the nice stuff is so hard to get in Canada, Alberta, The wrong choice will cost me 800 extra for shipping.

I made the mistake of buying an F3. I've had it for almost 2 months and have never been able to use it. It was defective out the crate and customer service wants me to fix it myself because "warranty". It's nice that they sent me the parts, but why am I responsible for fixing a brand new never used saw?

It's just a motor with a standard mount. Find a motor shop in your area & get it fixed or get a spare. The warrenty should cover some of the cost. The motor was not made by Laguna. You could have been up & running in less than a week. You're a business, you don't have time to wait.

So, you recommend people stay away from Laguna?