Land Rover Defender L663 10" PIVI Screen Upgrade to 11.4"

Land Rover Defender L663 10" PIVI Screen Upgrade to 11.4" - Genuine Plastic Mount Swap

Рет қаралды 5,077

28 күн бұрын

In this video we show how to swap over the genuine screen plastics from the 10" PIVI screen to the genuine Land Rover Plastics for the larger 11.4" screen - these plastics form the physical mount for the larger screen. We will launch our own plastic bracket kit which will make this upgrade much easier.

Пікірлер: 43

@ethanhood1030 11 күн бұрын

Ready to purchase as soon as everything posts! looking forward to this! I’m ready to buy all components needed.

@fourbysolo 25 күн бұрын

Hello from Australia. Thanks again Simon and Destiny. Maybe it's just me, but I like the 10 inch screen as it's subtle and does what I want. Also, my dash is set up so that I have the information I need. I find some of these larger screens can be too distracting. The new Land Cruiser 300 series is an example for me. Thanks again. long time follower and I've bought a few of your products.

@sukhamritoberoi8889 9 күн бұрын

Waiting for u upgraded brackets😊

@sukhamritoberoi8889 8 сағат бұрын

Waiting for the nw video on the bracket and top rail fitting

@ethanhood1030 5 күн бұрын

Love your videos Simon! I have a cool idea. I think I saw a variation that the center console had a cooling system or like a refrigerator in it. Anyway to modify one that is just regular without this feature? That would be a cool option to add.

@HQBProductions 26 күн бұрын

Simon…my nerves about loose creaking and rattling bits afterwards are too great..I would have to buy the car with the big screen already fitted!! 😬😱😱😀😀😀😀

@TheGariuk 26 күн бұрын

Can't wait for the brackets and the wiring loom. Will order as soon as they are available.

@dannymm 26 күн бұрын

Same here, my screen came today so just need the brackets and the wiring loom and the GAP tool!

@L663 26 күн бұрын

Zach is on vacation at the moment ( well deserved ) - we are a couple of iterations away from production brackets.

@jl7656 25 күн бұрын

Yes we need the wiring loom video ASAP please. Thanks.

@andrewmiddlemiss1508 25 күн бұрын

A certain other company that does up grades had a video on the screen up grades, and he mentioned they had to modify the top rail for the screen to fit. I believe they cut some away , it looked like a castellation when they finished.

@mohammedalqaydi4489 26 күн бұрын

Destiny doing good job, the top panel should fit without any issues, just try to squeeze it in a bit with alignment. You need cooding after that. Good luck Simon and keep going

@L663 26 күн бұрын

Interesting you managed to fit the top panel - it seems very tight. I think our conversion brackets will be a better job. We have now done the coding. Just waiting for the brackets and wiring looms to arrive.

@sukhamritoberoi8889 25 күн бұрын

I am faceing some alignment issues of top leather dash after screen upgrade can y mou explain how to align or squeeze

@simonjefferson 25 күн бұрын

@@sukhamritoberoi8889 I am glad you added this comment - i thought.i was doing something wrong ! Simon

@sukhamritoberoi8889 24 күн бұрын

@@simonjefferson☺️ maybe we need to cut the top leather part a bit to fully settle it in at the top clip

@sukhamritoberoi8889 23 күн бұрын

@system11yt Күн бұрын

This is a nice upgrade, do you have a rough estimate of how much it would all cost inclusive? I've seen some retrofitters offering it (been shopping for a fridge upgrade) but it's quite expensive that way. I was thinking a click & go umbrella holder might be nice - basically a long vertical stick optionally with some cup holder style buckets at the end, with some of those rubber stretchy straps so you can attach them without damaging the umbrella wires. It'd be dead easy, tip seat forward and there they are. Unfortunately while I have a 3d printer to mock something up, I have zero modelling skills. Annoying as I could sketch one in 15 minutes but my 3D skills are below creating a featureless cube.

@MrJordanwain 26 күн бұрын

I have seen LR retrofitters replacing the top bar so it’s definitely a different part on the big screen.

@ethanhood1030 26 күн бұрын

Great video! I’m ready to buy screen, brackets and conversion wires as soon as ready! Do I also need to get a gap tool too? Thanks! Looks great. Would love a bigger screen but if you can’t get I’ll purchase this

@defiancehome 25 күн бұрын

Thanks a ton for this work and the upcoming bracket and wiring. Do you expect that your bracket will also work with the 13” LR screen?

@alihosseinion729 26 күн бұрын

Where can I buy the 11.4" screen to use your bracket and wiring?

@xcl2l 19 күн бұрын

Hello Simon, I bought a defender carpathian edition from Germany I live in the Middle East and it's very hot in here in the summer and we must have remote start on every car for the cabin preconditioning, After I connected the car app to my phone I was shocked that there is no option for cabin preconditioning in the app after digging about it turns out German imported cars have no remote start up to some law regulations, Is there any way that I can enable that option? I contacted a garage recently and they told me they'll do it for 1500$ which is an insane price for just enabling an option that is already in the car and it is disabled. I have a V8 carpathian edition 2023.

@peterward9745 26 күн бұрын

Simon , just noticed you’ve got the Nano sim slot fitted to your car. This I mentioned in the comments of your Gap tool. Are you going to show a video of fitting this and using your own sim.

@L663 26 күн бұрын

Drop an email via the website and i will talk to you offline about this. Basically i am worried that it will upset JLR if i push for the Esim transfer... I need you to try this...

@peterward9745 26 күн бұрын

LR retrofits do fit this, and have done for a long while, I do understand your concerns but I think they are going over the top with their renewal contracts. I used to have a Volvo and used a 3 data sim for 12 months , cheap as chips. I Understand you don’t want to upset LR , so if you want to leave it alone fare play.

@user-lm4lv8eo6g 7 күн бұрын

I would like to ask if there is any wind noise when installing stairs? Which side can be improved to reduce the wind noise, thank you

@L663 6 күн бұрын

I do not think the side ladder causes too much wind noise - the major issue is the roof rack.

@alihosseinion729 17 күн бұрын

When will you be offering the wiring loom, I just bought all the brackets from you.

@L663 9 күн бұрын

Hopefully in the next 2 weeks ! I have just been on holiday for a week !

@mvirdi2333 26 күн бұрын

❤❤🙏🙏🇬🇧

@ecossearthur 26 күн бұрын

Dang just woke up! Sorry about that! 😅

@motorxpromotocare 23 күн бұрын

Do you need also some kind of software ? Or is just plug & play ? Only hardware ?

@L663 22 күн бұрын

To change screen you need 1 new screen 2 wiring conversion loom 3 new mount plastic 4 software coding

@motorxpromotocare 22 күн бұрын

Thank you 🙏

@sukhamritoberoi8889 23 күн бұрын

Did someone manage to cut the top leather to fit with bigger screen

@L663 22 күн бұрын

In the comments someone says they just squashed it in place

@jasonsilliman674 17 күн бұрын

When will the easy brackets be available? The only thing that bothers me about my Defender is the small screen!

@L663 17 күн бұрын

Should be a couple of weeks - delayed by me enjoying a short holiday !

@ethanhood1030 11 күн бұрын

I too am looking forward to this! I’m ready to buy all components needed.

@robertfrost4433 25 күн бұрын

No thank you.