I silently laughed when you said let´s see how to remove the sensors . All kidding aside , I have never swapped or had 3 sensors fail at the same time . Good that your client has parts on hand .
@LMAutoRepairs2 жыл бұрын
😅 👍👍👍
@va70522 жыл бұрын
Problems never ends on a Land Rover
@LMAutoRepairs2 жыл бұрын
Very true! 👍👍👍
@kayodeoluwamotemi7433 Жыл бұрын
It never
@nicolasdakota103 Жыл бұрын
Great job, and I hope I can fix my problem . My landrover is moody and sometimes won't crank, and radio + ac and heat don't work .parking sensor flashing
@Parknest2 жыл бұрын
I've had to do the the same job on my Volvo XC90 and the rear bumper has to be removed to get to the sensors like on the Disco 3. I had a faulty sensor. The one I bought on Amazon was the wrong part so I ended up getting a used genuine Volvo sensor on eBay and it fixed the problem.
@LMAutoRepairs2 жыл бұрын
😊 👍👍👍
@Hoinar92 жыл бұрын
Thanks, i have learn something new today.
@LMAutoRepairs2 жыл бұрын
😊 👍👍👍
@pdmark3112 жыл бұрын
Super easy fix. Turn it on and put your ear up to each and you will hear a ticking sound from each beeper. If you don't hear anything that is the bad one.
@LMAutoRepairs2 жыл бұрын
That's another way... The only issue with some systems, is that if is detected that one sensor is faulty, the whole system is disabled... stopping activating the remaining good ones... But yes, loads of systems you can do it that way... 👍👍👍
@iantomlinson24222 жыл бұрын
came here to say that, i have a faulty front one on my 2006 hse, thats exactly how i found it
@LMAutoRepairs2 жыл бұрын
👍👍👍
@engeneer_ru58272 жыл бұрын
Thank you Louis! Useful video.
@LMAutoRepairs2 жыл бұрын
😊 Thanks!
@sohailrabani2 жыл бұрын
Muitos caros estao a churar que nao apanhao doutor como doutor luis😄
@LMAutoRepairs2 жыл бұрын
😅 👍👍👍
@kevinpalmer74522 жыл бұрын
Brilliant as always 👍
@LMAutoRepairs2 жыл бұрын
😊 Thanks! 👍👍👍
@candrevajonathan-matic66042 жыл бұрын
Nice engineer bro
@LMAutoRepairs2 жыл бұрын
😊 👍👍
@electronic79792 жыл бұрын
Very good 👏
@LMAutoRepairs2 жыл бұрын
😊 Thanks! 👍👍👍
@serolunarrosa2 жыл бұрын
Hi, sorry I'm writing here, I swap cluster on mercedes w203 with cluster w209, now the problem is on cluster w209 don t show milege but everythink works, the quastion is can you add the milege from w203 cluster to w209 cluster, or maybe virginise the w209 cluster and coding , thank you, wait you reapond. I can come to you for me is no problem.
@panikognito460 Жыл бұрын
Hi, what kind of diagnostic tool do you use?
@LMAutoRepairs Жыл бұрын
Autel MS908P... Thank you!
@jed72002 жыл бұрын
Hi, I had parking aid unavailable. Faults were all 4 back sensors (one of them said historic the others said intermittent). Replaced the historic, sensor that seemed to be playing up. Problem still remains. Scanned again, now says a different sensor and control module. Wiring on one sensor looks frayed. Replace wiring look next?
@LMAutoRepairs2 жыл бұрын
I would say proper check/measure wiring, repair or replace... 👍👍👍
@jed72002 жыл бұрын
Replaced wiring harness and rear sensors, fault still remains and without parking aid :(
@LMAutoRepairs2 жыл бұрын
Stop replacing parts without actually diagnose what is wrong... A waste of time and money...
@jed72002 жыл бұрын
@@LMAutoRepairs what other diagnostic is there? Codes have been read and report same thing, rear left sensor fault. Main dealer?
@LMAutoRepairs2 жыл бұрын
Have you measure the wiring from the sensor to the module?
@rezanerdem36132 жыл бұрын
hello, my freelander car parking sensor eye was broken, I changed it, now there is a sound in all of them, but it still gives an error, can we reset it or what could be the problem, thank you
@LMAutoRepairs2 жыл бұрын
No resetting procedure that I am aware of... You most likely have other issues... Scan the car, and see what is reporting... 👍👍👍
@rezanerdem36132 жыл бұрын
@@LMAutoRepairs When I take a video with the phone, there is a sound from the sensors, what else could it be, thank you
@LMAutoRepairs2 жыл бұрын
Again, scan the car... there is a few possibilities, anything I would suggest would be pure guess work... A scan should point you in the right direction... 👍👍👍
@neilfrancis30132 жыл бұрын
Hi mate I have the same flashing light but my sensors all seem to work they all make a clicking but I have no beeping sound frome inside any idea?
@LMAutoRepairs2 жыл бұрын
A wiring issue? It is difficult to say... Scan the car and go from there! 👍👍👍
@bpatriota2 жыл бұрын
Mostly like the speaker inside the trunk. Had to replace mine on my LR3
@louievdub88212 жыл бұрын
any other way to change the sensor without removing the bumper
@LMAutoRepairs2 жыл бұрын
Don't thing so.. unless you have really tiny and thin arms... To be fair, is quite straight forward, the removal of the bumper... Thank you for watching!👍👍👍
@mmario84232 жыл бұрын
Hello, i have a similar problem, my sensors do not work in range rover sport 2009, they do not click and do not come on when reverse or button is on, moreover light on the button is still on and button do not react. I cannot connect it via the diagnostic equipment, computer just do not show this module for cumminicate. Can you help ?
@LMAutoRepairs2 жыл бұрын
Check fuses to start with... If all good, check powers and grounds at the module... then communication lines... 👍👍👍
@mmario84232 жыл бұрын
@@LMAutoRepairs all of these has been already checked, can lines at the module are 2.9V, other are 12V and ground is also good, i have checked it on 2 modules
@LMAutoRepairs2 жыл бұрын
OK... The voltage at the CAN lines can be deceiving... scope would be better... if you have power and grounds, and communication lines are good at the module, that leaves a bad module as the issue...
@andrewyeo23532 жыл бұрын
Guessing it's cheaper to buy second hand bumper with sensors than to buy three original sensors
@LMAutoRepairs2 жыл бұрын
😅 Indeed!... 👍👍👍
@Fabi....2 жыл бұрын
🙋♂️👍
@LMAutoRepairs2 жыл бұрын
😊 👍👍👍
@mrgrumpy51162 жыл бұрын
😊👍
@LMAutoRepairs2 жыл бұрын
Thanks!
@mothanagharbe5132 жыл бұрын
hello
@LMAutoRepairs2 жыл бұрын
😊 👋
@mechtrev76262 жыл бұрын
I presume you are earning a living by repairing vehicles from home by your comments that a customer brought you a bumper to remove sensors from. I do hope that you have your premises registered as a business and that you are paying business rates on the premises
@LMAutoRepairs2 жыл бұрын
No I not earning a living from this... I have a job... this is a part time only... Thank you for watching!