ENGRAVING WITH COLOR😜HOW TO COLOR FILL YOUR ENGRAVING LIKE A BOSS🐱‍👤

Рет қаралды 602,792

3 жыл бұрын

In this episode of Laser Engraving 911 you will learn the process of back-filling or color filling your engravings on wood! All techniques revealed! Check the full description below to get links to all the tools and products used in this video for maximum success! and have fun! 😎😎😎
_____ LINKS TO ALL TOOLS AND PRODUCTS USED IN THIS VIDEO______🎁
amzn.to/3NI3Pba Assorted Flash Premium Acrylic Paint Set 🚨
amzn.to/3i7ZQ7g 2X Rustoleum Clear Coat Glossy ✔
amzn.to/3bz9grt Ridgid Random Orbital Sander 👌
amzn.to/3sma3li Cedar Wood Grilling Planks 🎶
amzn.to/3skEAjz Machinist Ruler Decimal Style 🥓
amzn.to/3bA9ONu Weeding Tool 👏
amzn.to/2LvABjo Blue Scotch Brand Masking Tape 👀
amzn.to/35zfWSD Assorted Paint Brushes ✌
MORE MUST HAVE LASER ENGRAVERS TOOLS AND SUPPLIES
✌Black Paper Masking Tape amzn.to/3XMIW3e
🐱‍👤Cloud9 S4 4" Exhaust Fan amzn.to/3lE0SsO
🥓Scotch 3M Blue Masking Tape amzn.to/2UzRavy
✅Private 1 on 1 Consulting With Michael Laser Engraving 911
sonomalaserengraving.com/prod...
✔LASER ENGRAVING 911 MUST HAVE LIST FOR THE SHOP:✔
🚨FIBER LASER and Co2 SAFTEY GLASSES amzn.to/38OUwDb
🤷‍♂️DATA VAC BLOWER amzn.to/2Kh5CXB
😉DECIMAL MACHINIST RULER amzn.to/38QZeAG
😜BRILLIANCE LASER MARKING SPRAY for Co2 Laser amzn.to/3f735L1
🚨Great Resource For Laser Engraving Equipment and Supplies
laserengravingsupply.com/
*As an Amazon Associate I earn from qualifying purchases. * I am a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com. Be sure to like and subscribe for more tips and trick on laser engraving.
#howtolaserengrave #engravewithcolor #colorengraving

Пікірлер: 485

@warrenking1815 3 жыл бұрын

Great idea, like the options that this gives to making projects pop with color. Thank you for sharing!

@LaserEngraving911 3 жыл бұрын

Thanks for the support and motivation!

@yourunclesam6780 3 жыл бұрын

Amazing project.Thank for your time

@18mtoo 2 жыл бұрын

Yes old chap, it is perfectly fine for you to be proud of your work and your contribution. Thank you so much.

@LaserEngraving911 2 жыл бұрын

Thank You Kindly!

@austinstroot9910 2 жыл бұрын

Bro, first time hitting your channel up and love the detail and how in-depth you go while also making it extremely simple and dumbed down for people like me (beginner with absolutely no design/artistic experience)! I have ordered a new Fusion Edge 12, 40 watt and excited to get started in products like this and others!

@LaserEngraving911 2 жыл бұрын

Thanks Austin, really appreciate your support

@disignscdn 3 жыл бұрын

Very helpful video! Thanks! I had no idea you could do this through Corel Draw! Now I’ll be spending the day figuring out if it will work with my ORTUR. JUST A suggestion to avoid bleed through and having to sand is : first coat of a colour similar to your wood, allow to dry and then add your colour. This is very effective when painting with vinyl stencils on wood.

@mmagg1017 3 жыл бұрын

Great content! I like to use Mod Podge after the engraving but before the painting. Just a thin coat in the engraving will help to better seal the tape to the wood and help seal the engraved edges so the paint does not wick out.

@SWATStrachan 8 күн бұрын

Just got my first proper laser engraver (I was using a Wicked Lasers' LaserCube up until now!) and this is valuable information, I can't wait to try it out myself.

@LaserEngraving911 7 күн бұрын

Glad it was helpful!

@gunnarbiker 5 ай бұрын

I'm new to engraving and found this extremely helpful! thanks for the tip!

@graceland75 2 жыл бұрын

Great video !!! I will try this method with engraving my pen turning projects. Thank you

@rychei5393 2 жыл бұрын

To prevent under-bleed start with a clear coat to seal, and then add your color.

@OceanMusings 2 жыл бұрын

THANK YOU

@joaquina2447 2 жыл бұрын

Do you coat it before applying the mask or once you've engraved it?

@rychei5393 2 жыл бұрын

@@joaquina2447 After applying the mask... if it bleeds, it bleeds clear and seals those gaps.

@playgrrr3661 Жыл бұрын

@@rychei5393 🔥

@markthompsonst45 Жыл бұрын

I would clear coat before the mask. It will fill the wood grain, reducing bleeding under the mask.

@911HerbalinfoGoneRaw 3 жыл бұрын

Great video! I made myself a horror box to put in my bedroom because I'm such a horror fan, but found that painting my box a specific color also colored in the engraving parts that I originally wanted black. This defintiely gave me an idea of how I can fix that problem for next time. Thank you for this!

@LaserEngraving911 3 жыл бұрын

Your welcome sounds like a fun project!! Thanks for the support!

@machinemaker2248 2 жыл бұрын

A flat bathroom door squeegee can take much of the fill off of the face. A carefully used hard roller can cover the face without touching the fill.

@COddietsch 3 жыл бұрын

Nicely done. I am just now getting into the business and this was a well done easy to understand video. I think my biggest challenge is going to be figuring out what speed and power to use so I don't waste my product. Thanks

@DP-ot6zf 3 жыл бұрын

Thank you for sharing this!

@lyneboucher4300 2 жыл бұрын

Great video! .. As of the spray paint bleeding problem it can be overcome with covering the engraved area with modpodge or spray laquer first. I didn't try it myself yet but I saw some videos here showing the process :) Enjoy!

@laserartfgs3550 2 жыл бұрын

Hola... Excelente trabajo, el resultado es genial... Muchas gracias por compartir éste proyecto... Saludos.

@alwayscreatedforyou 3 жыл бұрын

Love this video. Thank you so much for sharing!

@idrizdragovic2602 3 жыл бұрын

First video I have found to be thorough and detailed throughout the whole process. 10/10

@LaserEngraving911 2 жыл бұрын

Much appreicted!

@HalfAssHomestead 3 жыл бұрын

One other thing to consider, is to spray the clear coat on the wood before masking to stop the bleed of the paint. You would want to let that stand in open space for a day so that it doesn't gas off in the laser.

@LaserEngraving911 3 жыл бұрын

def all good ideas, I would just make sure that the the tape does not peel up the clear coat, but hey if it works, that's another great tip!

@William9alex 2 жыл бұрын

@@LaserEngraving911 Just spitballing, but I'm assuming using lacquer wouldn't cause a peel issue? Even if it did, another coat of lacquer over the entire project at the end should blend everything together. Nice video!

@Camane53 Жыл бұрын

Not necessarily however, if that works for you, cool!

@johnnylgulledge6899 2 жыл бұрын

Absolutely fantastic job!

@jeant7848 2 ай бұрын

I am beyond what you would call a newbie...haven't even reached the newbie stage yet! I have a laser that I've yet to use because I truly don't know were to began. I've been watching a lot of videos to try and get a handle on were to start. Never understood what they would mean by masking and never knew what type of paint to use. They tell you to mask and then paint but... Anyway, I want to thank you for taking the time to explain the very basics of this project. You've cleared up quite a few questions that I had. Looking forward to searching and watching more of your videos. I've already hit the subscribe button. Thanks again.

@LaserEngraving911 2 ай бұрын

Thank You kindly, and I wish you the best on your journey!

@QuebecoisSti 2 жыл бұрын

Pretty nice. The 3M blue tape seems to hold pretty good! The clear coat must help alot staying good for a long time

@kandiharris3174 4 ай бұрын

One Work: Spectacular

@sherrizimmerman6369 4 ай бұрын

SO GOOD... thanks. I am NEW TO MOST ALL OF THIS... just got my Genmitsu L8 Pro Max Laser 20w

@georgekabacinski 3 жыл бұрын

Nice video. Thank you for posting it.

@WallyJ2K 2 жыл бұрын

Awesome instructions! Thanks!

@pravitjarriya4767 2 жыл бұрын

Thank you so much!! I wish you great success.

@accuratecreations5217 3 жыл бұрын

Excellent video. Thanks.

@JoePalumbo221 3 жыл бұрын

Great video. Thank you!

@marynelson6855 3 жыл бұрын

Been thinking of doing this- you have inspired me ! Great job of explaining the process. Appreciate you taking the time to show others your skill/craft with videos😀

@araceli512 3 жыл бұрын

Great video! Thanks

@benjaminpastrana9662 2 жыл бұрын

wow! new ways to create professional projects 💪🏼👏🏻👏🏻

@bunnybabybevytv6434 Жыл бұрын

Thanks for your help! Painter tip…do Not put paint anywhere near where the brush and handle come together…it’s just a waste and damages the brush while making it tougher ta clean.

@tracygilder1229 3 жыл бұрын

Great tutorial, you explain yourself very well. Can’t wait to get my engraving machine in the next week or so!

@ikbal2599 3 жыл бұрын

Please which machine you use ?

@junesplace888 2 жыл бұрын

@@ikbal2599 I have a L1 Pro Laserpecker that I am trying to get rid of. It is brand new and you find it on Amazon.

@MrXdirtycustoms 2 жыл бұрын

2 thing I noticed right off as a previous vinyl/heatpress & silkscreen guy... Corel DRAW and the stahls weeder! I never see anyone use Corel on KZfaq. Such an awesome program! great idea with the tape!

@cableguy2006 Жыл бұрын

This is a super cool idea. I can’t wait to try it out

@fishinchicks2009 3 жыл бұрын

Thank you your a Master of your craft !

@teky929rr 2 жыл бұрын

Wow thanks for the tutorial! This really helps expand my ideas.

@KenDilas01 2 жыл бұрын

Very Cool!! Thanks for Sharing!

@donaldjohnson394 2 жыл бұрын

Excellent video sir! I just wish I would have seen this last week when I was doing my project. Now I know something. 😃

@dublinvids Жыл бұрын

New to engraving here. Thanks for the video, really informative. Some machine you got there also!

@Iskelderon Жыл бұрын

The nice thing about this approach is that you can easily determine after half an hour whether you need another layer of acrylic paints or not. A buddy who works a lot with vinyl cutters uses a cheapo set of actual dentist tools to weed out parts of the mask, low-quality stuff you wouldn't want anywhere near your mouth but is perfect for detail work like that.

@LaserEngraving911 Жыл бұрын

Agreed!

@joebergdjproducts 3 жыл бұрын

Thanks for sharing.

@thomasverga469 2 жыл бұрын

Great video, great explanation of everything, especially the part about not waiting for the paint not dry completely. The only ting I would ad is that if it is going top be exposed to any moisture at all make sure that you seal the back side as well to make sure it does not absorb water and warp.

@LaserEngraving911 2 жыл бұрын

right on!

@risbill1 3 жыл бұрын

You can also spray your piece of wood with clear lacquer before putting on the tape (let it dry first obviously) . Then when you engrave the paint is less likely to bleed.

@flying2bill 3 жыл бұрын

my laser guy actually has me finish the piece before he engraves he then masks and burns

@rimc8783 3 жыл бұрын

You can hit it with the clear lacquer again after engraving before painting to stop the bleeding to.

@arcenduvelasco5225 2 жыл бұрын

Beautiful job!

@henryromero1464 9 ай бұрын

Thank you for all the extremely helpful tips, I’m new to lasers and I’ve learned so much from your videos.

@LaserEngraving911 9 ай бұрын

You are very welcome thanks for your support!

@tiborcsizmadi4796 3 жыл бұрын

Professional painter...best tape for no bleeding and you can leave it on all night ..frog tape..little more expensive,but always bleed-free..the best I have found

@Graeme758 3 жыл бұрын

As a professional painter did you cringe at him dunking his brush up past the ferrule?

@tiborcsizmadi4796 3 жыл бұрын

@@Graeme758 As soon as I saw that.. the first thing that popped into my head was ROOKIE......my first-year...apprentices would never do that in front of me I... pay for their tools..would tear them a new one and if hired some guy as an experienced painter and I saw that ..it would be his last day on my job-site

@niccolealdrich4890 Жыл бұрын

Thanks for sharing! This has definitely expanded my horizons!❤

@LaserEngraving911 Жыл бұрын

You are so welcome!

@cathymyers7831 Жыл бұрын

I I have watched numerous videos about lasers and I noticed one common feature "THE BEARD". Cannot grow a beard so I guess I will just hope for the best if I ever get to buy my own laser. Kidding aside the artists that produce these videos and art pieces are amazing. I cannot draw a straight line with a ruler or draw or paint a picture, so I really appreciate what you all do. Keep creating.

@LaserEngraving911 Жыл бұрын

With Great Beard, Comes Great Responsibility, Thank You for your support!

@mambaman2007 3 жыл бұрын

I like it, it's very inspiring.

@ondacuriosa1859 Жыл бұрын

i love when the people show everything! Thx bro!

@LaserEngraving911 Жыл бұрын

Thanks, really appreciate that.

@DrayDigital 5 ай бұрын

I use a similar technique when making signs with my CNC. I first spray my wood with a sealer (clear lacquer for interior projects or spar urethane for exterior projects). I then apply a strip of Oramask 951 (instead of painter's tape). Once carved, I reapply a thin layer of sealer to the exposed wood. By sealing the wood, I can use spray acrylic paint without concerns of bleeding. I'm looking at a Xtools S1 in the near future. I didn't think about using the same technique for the laser carvings until this video. Great work!

@LaserEngraving911 5 ай бұрын

Thanks!

@mairacastrellon1991 Жыл бұрын

Amazing video thank you for the great tips!

@douggelina4425 2 жыл бұрын

Very nice project, thanks for the lesson

@jayrome8764 2 жыл бұрын

I enjoyed this video. Thanks for the tips, especially regarding the choice of paint based on how it interacts with the wood and using a sander to smooth things off 👍🏾

@normankissler1916 2 жыл бұрын

Enjoyed the video. Thanks for the tips.

@davesenor3146 2 жыл бұрын

Really nice job and well done video. Thanks for sharing.

@timbothegreat3991 3 жыл бұрын

Great video. I'm new to the laser engraving and am a sponge right now. I'll definitely be giving this a try.

@rogue_nova2675 3 жыл бұрын

That's how I got here too!!!

@billdivine9501 3 жыл бұрын

Me too just got a Chinese 60W

@JessicaJohnson-ik3rn Ай бұрын

Thank you for sharing very helpful video

@conormcmenemie5126 Жыл бұрын

Massive thanks from Edinburgh Scotland for that tutorial. Is exactly what I am looking for.

@LaserEngraving911 Жыл бұрын

Glad it helped, thanks for watching!

@user-bo2wh2wh6i 3 жыл бұрын

Good and very clear video. Thanks

@havick27 2 жыл бұрын

This is genius 💡💙

@RaulGerardoHuertasPaiva Жыл бұрын

Nice explanation. I'm getting my engraver in a few days and this is something I'll trying the first day. Thanks!

@LaserEngraving911 Жыл бұрын

Thanks!

@johnware5312 3 жыл бұрын

Ormask works great too. While this is done with a laser, the process also works on a cnc. I do it all the time. Where it differs is the fact a laser can cut hair fine lines but the size of the bit is the limit on a cnc.. In BOTH cases give everything a shot of say rattlecan lacquer. It dries in about an hour and it prevents the paint from wicking into the grain. I usally use the acrylics paint and after the mask is removed I shoot a coat of flat or semigloss laquer over everything, I also use completely different software but the results are the same.

@spoffspoffington240 3 жыл бұрын

To avoid wicking you could seal the exposed with PVA before applying the paint

@dubsolo305 3 жыл бұрын

So Simple....never thought of That!

@LaserEngraving911 2 жыл бұрын

, glad you liked it!

@hansdegroot8549 Жыл бұрын

Very interesting technique. Thanks for sharing.

@007JHS 3 жыл бұрын

Way cool.

@jeffhatcher6585 5 ай бұрын

Definitely going to give this a go. Great idea

@LaserEngraving911 5 ай бұрын

Nice, do it!

@azizqassim9257 2 жыл бұрын

Thus was rich and amazing.. thank you very much

@leahronise9983 3 жыл бұрын

Look great

@1Peace 2 жыл бұрын

Great!

@reaper060670 Жыл бұрын

Hey Michael.. I just asked a question about Vectors in the leather patches on hats video.. I asked about vectors and stuff like that and now I know u have a video on all that stuff too.. Lovely Jubley man.. I know nothing! I'm learning on the fly man so thanks for that information,,

@spacewalla3574 3 жыл бұрын

Nice video. Thanks

@laserbutikextra 3 жыл бұрын

I will trey it i love it 😍

@Ricks2Cents Жыл бұрын

I like the idea!!!

@dickebk 2 жыл бұрын

Wonderful well thought out and explained presentation, especially the point on pulling off the masking tape early. I ran into that problem with the paint coming off. I saw on another video where someone prevented the underbleed on the edges by first hitting the either the bare, or fully painted or stained wood with lacquer/gloss clear/other sealing (making sure it's totally dry of course before using the laser machine). Then they did the engraving and paint fill and would do more final finishing on top of the paint after it dried. Perhaps that isn't best for all applications and better to sand like you did afterwards if working with bare wood. What are your thoughts on that? I did that and it seemed to work well.Thank you for taking the time to create this video for us!

@LaserEngraving911 2 жыл бұрын

I have seen lots of folks talk about sealing the wood prior to paint filling, I think its a cool idea, you can also add some clear coat to seal everything in like the video as well. Like you said each application is different and I encourage lots of experimentation!

@williamcaldwell9431 5 ай бұрын

Very helpful video. Thanks

@LaserEngraving911 5 ай бұрын

You're welcome

@rb95403 3 жыл бұрын

Fantastic video! Will try tomorrow...

@LaserEngraving911 2 жыл бұрын

Have fun!

@RonInAVan 2 жыл бұрын

Great video!! I’m receiving my first laser a ORTUR Laser Master 2 Pro, Laser Engraver just to get my foot I the door. I can’t wait to give this a try on my flag stars, thanks again.

@LaserEngraving911 2 жыл бұрын

I dont see why not!

@millionmilerclub Жыл бұрын

That came out great.

@LaserEngraving911 Жыл бұрын

Thank You!

@MuntheDane 3 ай бұрын

I’m looking forward to trying this.

@LaserEngraving911 3 ай бұрын

Nice have fun!

@johnthompson3605 2 жыл бұрын

I just bought my laser engraver, to do a specific job , but the number of different things I,m learning about, that can be achieved on these machines is mind blowing and a little overwhelming , where do I start , loved the video cheers.

@LaserEngraving911 2 жыл бұрын

Start by lasering everything you can around your shop! 🤣 you will learn alot by how different material react to laser, and take notes, write down all your settings, its great way to learn.

@ADVBear 2 жыл бұрын

Great video. Thanks for sharing. A little tip: You don't need to create guides on the border of the page in order to snap your drawing. Just select "Snap to Page" and then grab the top left knot and drag the drawing to the intersection on the edge of the page.

@LaserEngraving911 2 жыл бұрын

cool, always nice to know new shortcuts

@ADVBear 2 жыл бұрын

@@LaserEngraving911 ❤️

@RedPillSurvival 21 күн бұрын

I found one alternative to weeding is to roll some painters tape around your hand and drag it across the surface like you were cleaning lint off of clothing. It will peel off most of the little pieces of masking. Won't work on acrylic and some other surfaces because It will leave some adhesive residue.

@LaserEngraving911 20 күн бұрын

Cool tip!

@thecarguymorales6342 3 жыл бұрын

Nice, thanks bro!

@powerchute1 3 жыл бұрын

Good content. You are a good teacher for somebody like me who is just getting started. I hope to see more. Liked and Subscribed.

@LaserEngraving911 3 жыл бұрын

Thanks BG!

@paragonn22 Жыл бұрын

Excellent!!! Thank you so much!!!

@LaserEngraving911 Жыл бұрын

Glad it was helpful!

@LowVisionUKTerrysView 3 жыл бұрын

loved this tutorial. Very new to lasers, in fact I dont get my machine for another couple of weeks, so doing lots of research in advance. thanks so much for taking the time to do this, and explaining the process so well. liked and subscribed and cant wait for more Terry

@albetaylormade7400 2 жыл бұрын

Nice......FKN FANTABULOUS.....love it.....

@Matt_Hatt3r 3 ай бұрын

I haven't tried this myself yet, but I heard from a reliable source (Bob at ILTMS) that if you put on a quick coat of clear finish BEFORE you use paint, it will help prevent bleeding under the masking tape! That way you don't have to spend extra time sanding off paint bleed. :)

@LaserEngraving911 3 ай бұрын

Great tip, yes it works.

@bstewart6338 5 ай бұрын

Excellent ! Thank you

@LaserEngraving911 5 ай бұрын

Glad you liked it!

@mpcaz 3 ай бұрын

I have some blue stencil vinyl and I think I'll try it with that. Got it when I was trying to do some silk screening. Great video and makes it so easy!

@LaserEngraving911 3 ай бұрын

awesome!

@claytonbartels130 2 жыл бұрын

This is a great idea

@sonyah8217 3 ай бұрын

Nice! Thank you so much!!

@LaserEngraving911 3 ай бұрын

You're welcome!

@nemo4907 2 жыл бұрын

I usually do a quick spray clear seal coat before fill, really helps with under bleed. If you do get under bleed its clear and wont show. I found doing the weeding first helps. In weeding you almost always drag a little fill paint onto the surface. Just found I do less clean up.

@LaserEngraving911 2 жыл бұрын

Nice!