Camera is almost always blurry. I like this. I've been using the RCBS 3-way trimmers. Both with the hand wheel and removal of it and mounting a drill. It heats really old holding the case after a while. I've had carpal tunnel release surgery in both wrists. This thing no matter how often I may need to replace Bart's is much easier and accurate. There are tips and tricks to get a feel for making the trim more accurate and consistent. I also have the RCBS Case prep station. This trimmer from Lee is a great tool for any reloader to have in their box of tricks.

Great review!

you are going to run through a lot of chamfer blades because of the number of turns you do and the presures you are applying. I just went down this road with Lee. Try using a battery powered screw driver and lighten up on the presures and number of turns. IMHO

Yes they go in the case and you dump them out after trimming each case. Sometimes the shavings will build up in the die so I blow it out every 20 to 30 cases.

Why do you not use the spacer please

'just ordered one. I can't wait. I hate almost all current trimming methods. Too time-consuming. I made a video on 4 methods using Lee products, before the power-trim method.

After several 1000 cases this is nice.

I purchased the Lee deluxe power quick trim kit after reading and watching videos on how quick and accurate to 0.001 of an inch this was. I was intending on trimming 9 mm cases and if I liked it was going to purchase a set for all the calibers I reload. The specs in my reloading manual states the max case length is 0.0754" and a trim to length of 0.744" with 10 adjustments of 0.001". the very smallest length this will cut is to 0.0751". and the adjustment dial does not stay put where you set this. I called Lee and spoke with a technitian and he told me I was exspecting far to much accuracy from the tool. I quess I was exspecting to trim the case to the starting trim length for the specified calber. The technician stated that it will trim it somewhere within 0.754" and 0.744" and thats good enough. I reload for consistancy and accuracy not close enough or good enough to shoot. If I am gooing to take the time and effort to trim the cases i want them all the same not somewhere in a range. So the 10 increments of 0.001" dial is to get it whithin a range of 0.754" and 0.751" not where you want it. I wanted to return it and was told to return it to the dealer who I purchased it from who does not take returns.this is not a precision instrument. Not worth having in my opinion.

Thanks for the review.

Make sure lube is removed from cases otherwise die will not grip cases and they will spin and cutter will not cut. If you let them spin the plastic inside the die will wear and no longer grip cases.

Can you adjust the die to get exact measurements between all cases ran through the die?

great video! thanks.

Where do all the brass cuttings go? Do they fall in the case?

The motive is to trim all cases within the specs. consistently. A thin lube is a good aid and simply use a vacuum to clean up the shavings. Good review.... For example with the 45/70 case when using the Hornady FTX bullets you need to shorten the case below spec. I guess the die won't let you make those alterations. Havn't tried it yet but was wondering.

good review - keep the videos coming...

You are Harlan Williams. Nice.

just place ur hand behind the case and the camera will focus

need to take out ball bearing from cutter only for bigger brass like 308 30-06 need that much pressure

Does anyone get consistent trim lengths with these things? Mine gives me crazy variations in case length no matter how careful I am.

Good Job