Product review: Lee Quick Trim Deluxe

Рет қаралды 5,812

Күн бұрын

I demonstrate the Quick Trim Deluxe and show you how to break it.
Questions, comments, concerns? email me at hannibalofky@protonmail.com

Пікірлер: 28

@cri8tor Жыл бұрын

Purchased the one you can use with a drill, but haven't used it yet. Thank you for the video.

@brigond1 3 жыл бұрын

Thanks , I watched your video to see how the blades go in . I ended up making one out of a finishing nail. I cut a groove in the middle of the pin that I made, using a dremal . Works great and it's made of metal now. I think the original pin is plastic

@redneckreloader 3 жыл бұрын

That's great! Yes, the original is plastic. You had a great idea.

@brigond1 3 жыл бұрын

@@redneckreloader if you were to buy it on Lee's website ' it's only around 5 bucks plus shipping. This also includes a few other plastic parts that you don't need . It was fun making a better one.

@c4jax 2 жыл бұрын

Thanks @brigond I made the one today following your idea. A round nail cut down and the middle thinned with the dremel. Finished with a tiny round file. :) top tip.

@tommyj7087 4 жыл бұрын

Bought this and tried it last night and could not figure it out. Thanks for the video. I was WAY over thinking it. I am disappointed to see how frail it is. I bought it and the case specific die for 223, 308, 6.5 Creed, 7mm-08, 7mm Rem Mag & 300 HAM'r in prepartion, now it looks like it may have been a waste. I am going to give it a try and we will see how it holds up. Looked like it gave you a decent case even with the problems.

@richardkut3976 Жыл бұрын

Thanks for for the info.

@jamesvatter5729 2 жыл бұрын

I have the drill version Lee trimmer. Problem I keep running into with .308s is that it bevels the outside edge of the case mouth way too much. I heard there is a way to adjust the tension, but didn't get an explanation. Any ideas?

@redneckreloader 2 жыл бұрын

Yes. Try taking out the outer blades. I've actually taking the blades amount of mine altogether. I just used it to trim to length, then I use my manual tool to chamfer and deburr. I find it gives a cleaner edge that way. You could try just leaving the inner blade which would just chamfer the inside of the case mouth. You may have to devour it manually, but it's worth a try.

@cory8791 4 жыл бұрын

Great vid!!!! Started out to be a review now it’s a warranty claim how too? LoL jk

@redneckreloader 4 жыл бұрын

Lol, yep. Definately turned out different than I planned.

@user-ol6lz9rm2b 6 ай бұрын

Did you ever find the pin that broke. If you did, could you put the item number down. My pin is loose and I'm afraid I'm going to lose it. Would like to have some spares

@redneckreloader 6 ай бұрын

Sure did, here is the part number QT1739

@gruntspy44 3 жыл бұрын

I wonder if this will make my 5.7x28 easier

@redneckreloader 3 жыл бұрын

I haven't used it on those, but it works really well with .223.

@snvm69 2 жыл бұрын

Did you size first or after

@redneckreloader 2 жыл бұрын

I size first. My reasoning is that case length can grow or shrink from sizing. So I figure if I trim, then I size, the length will change and I won't know what the final length is

@SirGurkman 3 жыл бұрын

For the next time you can refer to this instructions: support.leeprecision.net/en/knowledgebase/article/replace-pin-inside-cutter-body-quick-trim But your video was helpful to me anyway. Could you please tell me if the pin is really made of plastic? I cannot find the pin as a replacement part on the manufacturers website. Only enclosed in the molded parts qt (leeprecision.com/molded-parts-qt.html). But I do not want all those parts since I just need the pin. Do you have any suggestions?

@redneckreloader 3 жыл бұрын

Thank you for the link to the knowledge base. That looks very helpful. I'm at work, when I get home I can try to find the part number. I made a follow up video to this called something like the lee quick trim revisited. In that one I confirm the pin is indeed plastic. I believe i show the actual invoice from Lee with the part number and price. If you want to see if you can find that video. I think I covered the info you are looking for in the first few minutes, so you don't have to watch the whole thing. God Bless

@SirGurkman 3 жыл бұрын

@@redneckreloader Thank you. I found out the part number and contacted Lee‘s customer service. Let’s see what they will answer.

@gruntspy44 3 жыл бұрын

I just broke the damn pin in mine

@redneckreloader 3 жыл бұрын

It's easy to do. You can use it to trim without the blades. You will just need to chamfer and deburr in a seperate step.

@gruntspy44 3 жыл бұрын

@@redneckreloader I may do that im messing with dreaded 5.7x28 brass.... this crap has to be perfect as possible

@redneckreloader 3 жыл бұрын

With this primer shortage I've been trimming 10mm brass down so I can use it for .40 s&w using large primers. I removed my blades and it actually does a better job of trimming them. The blades got dull and were chewing up the brass instead of chamfering it. Good luck.

@gruntspy44 3 жыл бұрын

@@redneckreloader and sir, im trying to take out all variables if you know what I mean.... consistency consistency consistency

@kenberscheit948 4 жыл бұрын

problem I see is that once it is set it should trim all cases to the same length ,which it clearly is not doing , junk at best , wouldnt expect that from lee? also the retaining pin system is not very well thought ot , couls use a screw in there with a shouled and it wouldnt come apart till you took it apart

@leonbuck9745 3 жыл бұрын

Someone broke theirs... :\

@p47rr 7 ай бұрын

It trims different lengths if you don’t wipe the savings off of the case holder. Also every twenty five cases. Stop and blow out the die with a compressor. Make sure you’re blowing the right end. Don’t want oil in the end that holds the case. Blow mine into a cereal box.