Lee Quick Trim .223 Remington

Рет қаралды 10,549

5 жыл бұрын

This is an explanation of some of the steps you take in order to determine if you need to trim a case and a demonstration of the Lee Quick Trim system.
Please check out Slim Cowboy:
gunstreamer.com/watch/full-re...
• Full review of RCBS ul...
and please check out rcbsreloading:
• RCBS Reloading 101

Пікірлер: 25

@kingpin7673 5 жыл бұрын

Very cool. .223 is going to be one of the Calibers that I start with when I start to reload

@tjteknik1 Жыл бұрын

This is basically my setup from trimming creedmoor cases. Much easier and faster to work with than using the Dillon xl750 for it (that one, I use for actual reloading later on).

@bmk5155 3 жыл бұрын

Great video

@Desperado3248 4 жыл бұрын

Just started reloading 223. Before only pistol and semi straight wall cases. So after trimming you do not need uniform length? Using this trimmer and some cases shorter than others. How short is too short?

@Squib1911 4 жыл бұрын

There is a min and max in the reload manual. I have reloaded .223 Remington/ 5.56x45mm NATO shorter than the minimum and never had any issues in an AR-15. I haven't done that with any other firearm or caliber. I am not going to recommend it 1.750" is the trim-to length. If you have time check out: Caliber Corner #132 Reloading rifle ammunition (emphasis on 5.56) tonite at 7 P.M. Eastern on the travisp11 channel or later on replay.

@Desperado3248 4 жыл бұрын

Some cases after trimming come in at 1.745-7, from what I have heard too long won’t chamber, but shorter cases are not a problem. Will be using in in Ar and Ruger mini 14

@Squib1911 4 жыл бұрын

@@Desperado3248 in my experience with AR's shorter will still chamber.

@echosreloadingchamber7306 5 жыл бұрын

What's the consistency in Cut length from cartridge to cartridge that you're coming up with squib load?

@Squib1911 5 жыл бұрын

I don't know. It's on the a reload notes that I put in the case with the reloads. I could control the variation some by using the adjustment in the cutter, but it isn't an issue for me reloading this caliber.

@travisweldmaster7815 Жыл бұрын

Lee case length guage put it in drill exact spec every time no setup, 5 dollars....screw all that. Even better I now have graduated too cost a little but the fastest most consistently best trimmer is by little crow gunwerks "world's finest case trimmer" and the name is absolutely appropriate

@streamylc 2 жыл бұрын

So you can't set the die or what?

@Squib1911 2 жыл бұрын

Or what?

@streamylc 2 жыл бұрын

@@Squib1911 you can't set the die to a designated length/depth(?) ..... or do you just go back and forth, measuring the cases, until you hit the mark?

@Squib1911 2 жыл бұрын

@@streamylc you just thread it all the way down. Lee Quick Trim dies are easy to use

@streamylc 2 жыл бұрын

@@Squib1911 wow..... and that definitely beats the price of standalone case trimmers 😵.... Lee comin in clutch once again, lol.

@Squib1911 2 жыл бұрын

@@streamylc good value. Good warranty. User friendly. American made. I use mostly Lee Precision dies, but I use reloading tools from multiple manufacturers.

@travisweldmaster7815 Жыл бұрын

Mabye im.wrong but only carbide-NON LUBRICATION NEEDED DIE does NOT exist for anything but straight wall pistol mabye 4570 or something but no bottle neck case die is lubeless, prove me wrong

@Squib1911 Жыл бұрын

This channel has no videos I don't have to prove you wrong. Make your own video and prove me wrong.

@travisweldmaster7815 Жыл бұрын

@@Squib1911 lol whatever

@travisweldmaster7815 Жыл бұрын

Ok well tell me what brand uses carbide that Is a bottle neck case that required zero lube? Brand please?

@travisweldmaster7815 Жыл бұрын

Squib load lol I'm sure you know all about squibs, but I'd love to not have lube on say.270, 7mag case, brand please? Without sticking it solid in there