Lian Li Strimer V2 Plus 600 watt 12VHPWR RGB cables wiring guide and tips

Рет қаралды 92,940

Жыл бұрын

In this video I'm showing off the Lian Li Strimer V2 Plus cables that are specifically designed for Nvidia's 40-series graphics cards and work with the 600watt PCIe connector. There are three different models available being shown here, so it's important to ensure you have the right one.
There are two cables which have that 600 watt 12VHPWR connector on both ends, this requires a PCIe gen 5 power supply unit with the right sort of connection OR a dedicated cable with that option. Alternatively you can get a cable that works with the three 8-pin PCIe connections you'd usually get from your power supply unit for graphics cards but then terminates into a 600watt connection style that connects to the GPU.
In this video I'm showing how these cables are installed, the logic for doing it, things to think about and how to avoid any issues.
Note that I've done a couple of videos on the previous Strimer cables and how those connect. To get the best out of these GPU cables you'll also need the control box that's included with the original 24-pin strimer cable:
Lian Li Strimer Plus V2 installation guide • Lian Li Strimer Plus V...
Lian Li Strimer Plus V2 review • Lian Li Strimer Plus V...
Please note links listed here include affiliate links which may earn me a commission. Find out more below.*
NewEgg - newegg.io/nc6828bea8
Amazon US - amzn.to/3KA68wx
CaseKing - tidd.ly/4914uxW
Amazon UK - amzn.to/3GfjpI3
Overclockers - tidd.ly/3SsncZu
Amazon FR - amzn.to/3KcYBlU
Amazon IT - amzn.to/3Ke4PSt
Amazon DE - amzn.to/3nMCfjJ
Amazon CA - amzn.to/3m88Rno
Other stuff:
ASUS ROG MAXIMUS Z690 FORMULA motherboard - • ASUS ROG MAXIMUS Z690 ...
NZXT C1200 Gold ATX 3.0 PSU • NZXT C1200 Gold ATX 3....
Lian Li RGB not working? Here's the fix for L-Connect • Lian Li RGB not workin...
The new STRIMER PLUS V2 12VHPWR cables feature a custom design 12VHPWR male connector at the GPU end. The connector follows the ATX 3.0 standard of a 12+4pin with improvements to its original design to provide a stronger connection to the GPU, and uses materials to ensure the connector’s durability. Built with 16AWG wires to deliver up to 600W, the STRIMER PLUS V2 12VHPWR cables can sustain higher temperatures and sharper bends even when it is close to the connector. For extra bending tolerance, part of the connector housing can be removed to allow the extension cables to bend even closer to the connector and improve large GPU’s compatibility with narrow PC cases.
With ATX 3.0 power supplies, there are two STRIMER options which are built with a 12VHPWR female connection at the PSU cable end. The first one features a wider array of LEDS with 12 light guides and can be connected to an existing STRIMER L-Connect 3 controller into the 3x8pin slot for instant compatibility. The second option is slimmer with 8 light guides and is compatible with the 2x8pin slot of the existing STRIMER L-Connect 3 controller. For older PSUs without 12VHPWR, users can opt for the STRIMER PLUS V2 12VHPWR 12+4pin to 3x8pin. This gives the option to directly connect the STRIMER PLUS V2 to modern GPUs. Featuring 8 light guides, the STRIMER PLUS V2 12VHPWR 12+4pin to 3x8pin is compatible with the 2x8pin slot of the existing STRIMER L-Connect 3 controller.
See the official site here - lian-li.com/product/strimer-p...
🏆Big thanks to my super awesome KZfaq members:
SirSpawnsALot, Meatykeyboard, Beaster Bunny, JayShank007, Rawrr483, DStarastins, McFarty, Riggsy79, Chief Hao, Kraken Tortoise, Aaron Yarden, Paolo madamba, Space Cannons, Mike S, Kyle and Jason🏆
Want to send me things for videos or other reasons? Use this address:
The Provoked Prawn
PO Box 13277
MANNINGTREE
CO11 9BE
United Kingdom
🔫Sub to my gaming channel🔫 / @theprovokedprawnpews
Come check me out on Twitch - / provokedprawn
Join my Discord to keep up to date or ask questions / discord
Follow on Reddit / theprovokedprawn
Read this far? You're awesome. Smash those sub and like buttons!
📌 Support the channel:
😍 See the benefits of being a member here - / @theprovokedprawn
Get some merch - theprovokedprawn.com/
Check out my dedicated Amazon Storefront to see my current fave gear - www.amazon.com/shop/theprovok...
📸 Recorded with amzn.to/3kYrhGP
PLEASE NOTE
Affiliate links*:
Disclosure: Shopping links within the description of this video generate a commission at no extra cost to you. These are added for your convenience but other retailers are available. As an Amazon Associate I earn from qualifying purchases.
Products:
Products featured may also have been sent for free for review/testing purposes. Often these have to be returned by me, but not always. I endeavour to avoid bias in my videos wherever possible and try to give honest, subjective opinions.

Пікірлер: 214

@TheProvokedPrawn 10 ай бұрын

Other things featured in this video: ASUS ROG MAXIMUS Z690 FORMULA motherboard - kzfaq.info/get/bejne/ntaYmNqQvbDOYo0.html NZXT C1200 Gold ATX 3.0 PSU kzfaq.info/get/bejne/rLSFoKdprLfcg4U.html Lian Li RGB not working? Here's the fix for L-Connect kzfaq.info/get/bejne/rtN8fLhllbuzhn0.html See deals (note these are affiliate links that earn me a commission at no extra cost to you): NewEgg - newegg.io/nc6828bea8 Amazon US - amzn.to/3KA68wx Amazon UK - amzn.to/3GfjpI3 Amazon FR - amzn.to/3KcYBlU Amazon IT - amzn.to/3Ke4PSt Amazon DE - amzn.to/3nMCfjJ Amazon CA - amzn.to/3m88Rno

@ChatGTA345 Жыл бұрын

I really like how these cables are reversible. Removes all the guesswork from it, unlike those Cablemod adapters that I wasn’t sure which one to get because I wasn’t sure which GPU I’ll get, and both were in short supply..

@aarontheblackfox 11 ай бұрын

THANK YOU. Been trying to find a video showing how the Lian Li cables are connected to the power supply. I was fairly confident they were just extenders but I wanted to see someone actually plug it in to verify. Watched dozens of videos and you're the first to actually show both ends getting connected.

@TheProvokedPrawn 11 ай бұрын

I aim to please :)

@taylor_made_graphics 3 ай бұрын

You saved my PC!! I’ve seen so many of your videos and each one, step by step, helped me complete my build for my first pc. So much to learn about different components and builds from one channel. Keep up the amazing work 👌

@Rashimotosan 10 ай бұрын

Dude you are killing it with product coverage. Already subbed and followed but it's crazy how the closer I get to finishing my build and looking stuff up the more I run into your content. Great stuff, keep up the good work!

@TheProvokedPrawn 10 ай бұрын

Thank you 👍

@JamieR 6 ай бұрын

Great video! Very informative, easy to follow and cleanly presented. I'd like to point out that it's definitely best practice to use 3 separate cables over split cables from PSU to GPU, as shown at 10:08. The 6950 XT would not run without issues while using a split cable, and I would estimate the same results with a 40 series card, even though their required wattage is lower.

@Kasherrrr 6 ай бұрын

One of the only videos i could find that throughly explains the different cable configurations thank youuuu squid man!!!

@TheProvokedPrawn 6 ай бұрын

Glad I could help! But prawns are not squids

@Kasherrrr 6 ай бұрын

@TheProvokedPrawn yes I realize that now. I watched the video, saw your costume at the end, and then instantly commented! 😞

@uozouozo Ай бұрын

thankyou so much for making this video, now im confident that they are all basicly an "extender"

@rulezbecca Жыл бұрын

Provoked Prawn just one word about your video contents... AMAZING! Thank You!

@TheProvokedPrawn Жыл бұрын

Thanks Daniele. Appreciate it 🦐

@hannahalexy Ай бұрын

Hey thanks! I've just done my first rgb build and your videos helped me a lot! A far cry from my previous build where i just plopped the 3 fans that came with my case right into the mobo lol!

@TheProvokedPrawn Ай бұрын

Thanks Hannah. Glad to help. Hope that means you're subscribed too. Enjoy the PC 👍🏼

@Rageousss Жыл бұрын

I ended up creating a pretty cool way to use a 2x8 on top of a 12VHPWR Adapter from Cable MODS using translucent rubber bands that you can only see up close with the PC off. It worked magically

@wilceleb6771 5 ай бұрын

Prawn thank you for your amazing content. Truly love the information you give out and the help. Wanted to ask you what you recommend I have a GEN5 motherboard and everything else but I have a EVGA 3080 CX3 black 3080 and I wanted to connect strimer which ones would you recommend for me to install? Thank you in advance.

@JaseRider 6 ай бұрын

Finally, someone who didn't call them "streamer" cables.

@TheGamerAffiliate 9 ай бұрын

Good to see your still making videos! I used to watch you like 2 or 3 years ago!

@TheProvokedPrawn 9 ай бұрын

Hey, thanks!

@achaz_ Жыл бұрын

when I saw Lian Li's video presenting these about an hour ago, I was like "hmm I wonder when the Provoked Prawn will give us a video about these new cables..." and here it is !!! Thank you for making amazing videos like that it's very precise and SUPER usefull ! you basically made my gaming setup and it's perfect

@TheProvokedPrawn Жыл бұрын

Amazing. That's a nice thought process. I hope others have it too. Glad I helped! Thanks for watching.

@correctthatfilthygrammar 6 ай бұрын

Please refrain from using spaces just before an exclamation or punctuation mark.

@nuntodagoat1 5 ай бұрын

@@correctthatfilthygrammarYeah, he should correct that filthy grammar.

@haroldnavarro9055 10 ай бұрын

Nice vids. Will this work if i will connect it to corsair internal 4 port usb2.0 hub? Will the L connect app work also?

@penguinoot5248 Жыл бұрын

Thanks, answered all my questions

@TheProvokedPrawn Жыл бұрын

Glad to help

@tylerrichard149 8 ай бұрын

which strimer would work on a 4060 with one 8 pin connector?

@scottdriscoll2333 7 ай бұрын

So this will work on a 4090 and a Corsair gold standard 1000e psu?

@raadrules187 Жыл бұрын

I am not sure what to go with I dont really know what PCie gen my Rm1000x is but I am running it w a 4090 which strimer plus v2 cables would I get? Also you mentioned needing to buy the old 24pin strimer to get ur control box correct?

@synthsakura6754 9 ай бұрын

Hopefully someone can help me out, I have a 4070ti would the 3x8 pin plugin version work for my card? Since the card only requires 2x8 pcie plug-ins to the 16 pin adapter ? Would I use all 3 pcie cables from my PSU to the lian li cable or just 2 ? (My psu also doesn’t have the 16 pin 600w cable plug-in option so I’m trying to figure out how to upgrade to this cable and which one to get) any advice or knowledge is super appreciated

@AvocadoDrexx Жыл бұрын

Hey, sooo I have a 2x8 pin Stimmer cable, am I able to use that to connect it to the adapter that comes with the card? Thanks

@AlfredoMorales-mo7rl Жыл бұрын

Question: I see the old school one has 3 8pin connectors, but my SUPRIM has 4. Will this still work ? I don’t see they made ken with 4 pcie connectors

@adamgphotography6616 5 ай бұрын

I’ve got a 4070 Aero. One 16 pin from the card into 2x8 pins into my RM750X psu. Can I just take the 16 pin out of the GPU currently and connect into the strimer, then plug the other end of the strimer into my GPU? Haven’t bought yet and not fully clued up.

@BluKunVT 2 ай бұрын

Do you know if the 12vhpwr to 3 x 8 pin cables will work with a 4070 ti super? And if so, do I have to plug all the cables in?

@daviddesrosiers1946 Жыл бұрын

I have a question about your rad placement in the case, which I'm building in the black version. How much does pulling warmed air in through the rad raise ambient temp in the case? My plan is to place the rad in the top of the case to exhaust the heat charged air, while intaking from side and bottom, also discharging from the back of the case.

@peterdejong5456 9 ай бұрын

Temp difference between the cool outside air and the rad is greater than between the hot inside air and the rad. Therefore CPU temps wil be higher when the rad is placed in the top of the case instead of the front.

@alanjones9926 Ай бұрын

Love your channel and informative videos - especially the the intricate wiring for Lian Li Fans etc. I am struggling at the moment to establish which Strimer cable I need for the Gigabyte 4070ti Super Aero 16Gb card I have just bought. There are different versions of the power connectors and the technical spec for the card talks about 1 x 16pin connector but the Strimer has versions Strimer plus V2 16-8 pins and Strimer plus V2 16-12 pins. - can you help me determine the one I need please? Keep up the good work :-)

@nickb365 11 ай бұрын

Noob question, i have a cable mod psu cable that connects to the gpu will it work with the 1st lian cable that you showed?

@user-fz7hl2wl7x 6 ай бұрын

Is it safe to use the Asus plug from the 4090 to plug into the Strimer? So 3 connectors into asus plug into strimer or is that too much daisy chaining?

@Svnd_man 11 ай бұрын

I’m new to pc gaming/building and after doing days of research I have most of my build ordered expect the strimmer. Just to make sure I’m understanding this correctly, the v2 plus 24 pin is for the motherboard and the 12vhpwr is for the 40 series gpu ?

@TheProvokedPrawn 11 ай бұрын

Yes

@fuffipack2159 4 ай бұрын

Is it able to use 2 of the L3 connectors for a third cable and does the lian software recognise the 2nd connector? I want to get of the rgb stripes of the third cable, tie them up somehow with the Cpu cable of the PSU and get the same light effects like on the other ones.

@japantalk2194 17 күн бұрын

Nice guide, very helpful! My main complaint is that Lian Li hasn't made a universal hub for all their products. The software imo is good and works well with the three varieties of products I'm using. It just stinks to have to shove 3 hubs into the back of a smaller case in order to use strimmer, tl lcd fans and sl infinity fans.

@TheProvokedPrawn 16 күн бұрын

Yeah that's a fair criticism

@DarkxNemesis 6 ай бұрын

Can I use these with a 7800 xt? Which strimer cables would I buy? Any help would be appreciated 🙃

@Static2 6 ай бұрын

Can I also use the Lian-Li Strimer Plus V2 12VHPWR 3x 8 with only two 8 pin connectors ?

@rage.hems.gaming 5 ай бұрын

Hey, will this cable work with RTX 4090 Gigabyte Aorus Xtreme Waterforce.? Bcz this card comes with and "16-pin to four 8-pin power adaptor". So I'm planning to buy that card and also this strimer cable. My psu will be MSI MPG A1000G.

@rmorenberg Жыл бұрын

good info as always thank you

@TheProvokedPrawn Жыл бұрын

Thanks Richard. If you're interested watch out for my videos on the Lancool 216 coming soon where hopefully I'll install this cable in better ways :)

@rmorenberg Жыл бұрын

@@TheProvokedPrawn sweet I'll keep a lookout for it

@yznqr1012 5 ай бұрын

Can I connect to the PCIe (x2) port-to-port adapter that comes with the GPU and connect it to the Power Supply RM1000X?

@rachelblake2350 Жыл бұрын

I'll watch properly in a bit, but just a quick one: would you recommend these as an upgrade to someone who bought the previous Strimer Plus series? Are there any new features at all?

@TheProvokedPrawn Жыл бұрын

If you take a look at the official site you'll see they have made changes. The light bars are closer together for instance. They're also more flexible and wider. But also fit the 40-series GPUs now, which the old ones don't.

@rachelblake2350 Жыл бұрын

@@TheProvokedPrawn thanks, I'm still on a 3070 so I don't have to worry about compatability. Would you say there's less of a bezel between the strips?

@nicholassherrill2294 Жыл бұрын

How would I use one of the triple 8 pin versions of this 12vhpwr to connect to the 4070ti? Since the 4070ti only needs 2 8 pins to power the gpu do I need to plug in 8 pin power connectors into all 3 of the 8 pin connections on the Strimer?

@Youseethisface 3 ай бұрын

Having the same question

@yznqr1012 5 ай бұрын

Can I put the strimer plus v2 PCIE 5.0 to (adapter) PCIE 5.0 Power Cable 16Pin (12+4) to 2x8Pin that comes with the GPU and then after that to the PSU?

@scotta8338 Жыл бұрын

With the 4070TI there is a 12+4 pin to 2 x 8 pin adapter. For this card would you buy the 3 8pin strimer and connect all 3 of them or just leave one empty? It's just slightly confusing since the adapter that comes with the 4070TI only has 2 8 pin connectors.

@MrEelement Жыл бұрын

Was wondering the same but you could get double sided 12vwpr and then have the adapter that your currently using on the end of that

@z-manbricks5910 Жыл бұрын

Yeah, no one has given a solid answer on this. A few people on reddit have said they used the 3x8 pin and left a slot empty. This is the route I'm probably going to go, but I hate leaving that 3rd slot. Pretty large oversight on the part of Lian Li...

@l10n79 Жыл бұрын

Buy the one with 2 12vhpwr connectors then use the one that came with your card.

@sick2426 Жыл бұрын

@@l10n79 I don’t get what your saying, the card comes with a 2x8 pin so there would still be a slot empty

@l10n79 Жыл бұрын

@@sick2426 You can use the adapter, so buy the one with two 12vhpwr connects, one for gpu and the other side goes to the adapter, then to PSU, forgoing the dual 8pin problem. The car will only pull what it needs so if you have more connectors it won't really matter. I have an amp airo extreme 4070ti with 3 and I use my adapter with this strimmer cable.

@shadowslayer19cg91 4 ай бұрын

I just got the asus dual 4070. What Strimer should I get if I also have the 850w lian li psu?

@irepax9889 Ай бұрын

I have a 4090 with 4conectors going out of the psu and from corsair 4 to 1 that goes into my gpu so i just have to unplug it and put the lianli strimer in between?

@spencersundeenvolleyball7977 4 ай бұрын

Hey! Great video! I currently ordered the strimer with the 3x6 to the 12 for my 4070 ti. I was wondering if you knew whether or not I would connect all three of the 3x6 or just two because the 4070 only uses 2 of those!

@keokle_1989 3 ай бұрын

@spencersundeenvolleyball7977 have you figured it out? I have a 4070ti that uses the 2 8 pins and am deciding which one to get

@matycodoceovalenzuela6079 Ай бұрын

do u hace any answers guys? i have a lian li strimer 3x8 pin to +12vhpower to my rtx 4070 super. But my psu have only 2 cables 6+2 to PCIE. it is safe to connect the lian li cable to 2 ports of 8 pin plus the pig tail of one of those? o it have must be with 3 x 8 pin independently? pls answer

@keokle_1989 Ай бұрын

@@matycodoceovalenzuela6079 you can pig tail one 8 pin and the use the other 8 pin for 3rd

@_S.L.Z_ 6 ай бұрын

which do i need to buy i want one for my motherboard and for my rtx 4080?

@NurrJaber 9 күн бұрын

So with the 3 pcie of the cable can you use one 8 pin to pcie and the other 2 daisy chained 8 pins to a 12vhpwr ?

@swifted Жыл бұрын

Which one should I use for the 4080 gigabyte oc without bending the metal? Also what cable would I use to plug for the PSU to the new strummers? PSU is Corsair RM850x

@TheProvokedPrawn Жыл бұрын

You can remove the plastic housing on the end as I showed, so it should be fine. You should probably get the 3 x 8 pin PCIe cable.

@Boogiebandit6 11 ай бұрын

@@TheProvokedPrawn I also have the same setup as swift. So do I buy the strimmers with 3x8 and just plug them straight into the PSU?

@Stevens288 Ай бұрын

Do I need to use all 3 8pin PCIE on the strimer cables or will 2 be ok?

@Armandocav1 Жыл бұрын

how wide is it? I would like to put it in an itx build, 12vhpwr 8 led strip

@rakankhalied Жыл бұрын

thank you

@dustinegle9908 Жыл бұрын

So, the cable you order depends on the type of Power Supply that you have? So should I just buy a Power Supply with the 12VHPWR output to make my like easier since I'm currently building a PC?

@TheProvokedPrawn Жыл бұрын

that is the easiest option yes

@alexplays2221 4 ай бұрын

Can I use the 3x8 vhpwr cable for my 4070?

@puffadafish8671 5 ай бұрын

What if the 5Volt 3 pin is already being used? (Motherboard only haves one)

@DanielWha 3 ай бұрын

can they be used on a amd gpu if its also dual 8 pin/ triple 8 pin

@pillepolle3122 Жыл бұрын

i have the strimer v1 in my current build, but i wont put them into my new clean white phanteks nv7 build. they would be just too much rgb

@bigdoublet Жыл бұрын

I have a Corsair rm1000x. I am using the Corsair 12VHPWR cable that connects to 2 PCI-e 8 pins on the PSU. Can I connect the Lian Li 12VHPWR 12 strip extension to the Corsair 12VHPWR cable? Or does the 12 strip cable only work with ATX 3.0/PCI-E 5.0 PSUs?

@abdullahhasan8866 10 ай бұрын

Any idea about this ?

@bigdoublet 10 ай бұрын

@@abdullahhasan8866 Yes. Was able to connect the Lian Li 12VHPWR 12 strip extension to the Corsair 12VHPWR cable with no issues. No need for an ATX 3.0/Pcie 5 PSU.

@awaken11 6 ай бұрын

Do the cables work with Rx 6700 XT gpu

@demonology1013 Жыл бұрын

Awesome video. Which one would I use for a 3080 with 2 8 pin connectors?

@TheProvokedPrawn Жыл бұрын

Hello! The 30-series doesn't support the 12VHPWR connector I believe? It's a different design - assuming you're talking about the FE?

@doodskie999 Жыл бұрын

You can use the strimer v2 plus dual 8 pin version. These strimers are for the 40 series only

@AvocadoDrexx Жыл бұрын

@@doodskie999 My 1000 Watt PSU doesn't have 12x4, only 2x8. Would I need to buy a new PSU?

@victorvazquezmatagarza1167 11 ай бұрын

Great Video, the voice of this dude is sooooo relaxing! Just one quick question.... if i have already the controler and the 24 pin strip, can i use the old controler for the new 12VHPWR extention?

@cemsengul16 5 ай бұрын

Is it supposed to make a click sound when you connect it? I plugged the new power connector on my 4090 and there is no click.

@kevinguy9829 Жыл бұрын

great mr prawn!

@TheProvokedPrawn Жыл бұрын

Thanks Kevin

@penaf 2 ай бұрын

Quick question: Power Unit Corsair RM850 doesn't have a 12VHPWR. But my GPU came with a splitter (?) from 12VH male to 2x 8pin female. Can I connect it to 2 PCIe/CPU slots on the power unit ?

@TheProvokedPrawn 2 ай бұрын

Then you'd want the strimmer that has the two PCIe 8 pin connectors at one end and 12vhpwr at the other. Don't try to connect that adapter directly to your PSU

@Boogiebandit6 11 ай бұрын

Does anyone know if i can use the Corsair 600W PCIe 5.0 12VHPWR Type-4 PSU Power Cable with my rm850x with the Strimer 12VHPWR 12+4-Pin Cable V2 connected to a 4070ti.

@Kira-wq7eb Жыл бұрын

Hi will there be any interference with glass panel? I am using h9 elite and fe 4090 horizontally mounted

@Kira-wq7eb Жыл бұрын

Also i have uni hub fan controller will it work with it?

@jewand91 22 күн бұрын

Quick question , I have a RM1000x PSU and am thinking about getting a 4080 Super . Which of these Strimer cables would I get?

@TheProvokedPrawn 22 күн бұрын

Do you have the 12vhpwr connector with that PSU with a single connector on either end? If so, there's a strimer cable with the same logic.

@alishark666 10 ай бұрын

can we combine 2 usb 2.0 headers into one for motherboards that just have 2 usb 2.0 headers?i have strimer plus controller and uni fan controller and ryuijin ii but my mb has 2 usb headers.

@TheProvokedPrawn 10 ай бұрын

kzfaq.info/get/bejne/mp6meK-TvL3Fc4U.html

@raynathanielcaparas8064 Ай бұрын

Hi should the usb header and sata connected for it to work? I got the strimmer 16 pin and the 12vpwr, my problem is my board only has 2 usb 2.0 header, i thought plugging the sata would work

@TheProvokedPrawn Ай бұрын

Try this kzfaq.info/get/bejne/mp6meK-TvL3Fc4U.html (yes you'll need sata power as well)

@raynathanielcaparas8064 Ай бұрын

@@TheProvokedPrawn thank you

@Czzr-ys7rw 3 ай бұрын

Do they take 600wats so if I have a 850 psu and my pc takes up 500w ima need a 1200+ way psu???

@anouarelouardi6115 6 ай бұрын

Salut est ce que je peut utiliser 2*8 a la place de 3*8 car jai une 4070 merci

@Nico_Kovach Жыл бұрын

I want to buy a new Strimer 12vhpwr. I have a 4070ti with 12vhpwr-2x8, pin cable. How can I connect? Buy 3x8 pin and leave one 8 pin empty?

@Youseethisface 3 ай бұрын

Having the same question

@steviewatt5862 6 ай бұрын

thanks this is exactly what i was looking for

@TheProvokedPrawn 6 ай бұрын

Glad to help!

@OGbrundle 4 ай бұрын

So if i already have a Lian Li Galahad II LCD, I cant just use just the controller that came with it by plugging the strimer cable in to it??

@TheProvokedPrawn 4 ай бұрын

With the sync port adapter potentially

@reulogio Жыл бұрын

Do they have any that work with xfx 7900 xtx merc?

@eliadbu Жыл бұрын

yes, just buy the regular Strimer plus V2 triple 8pin adapter that they have (model number: PW12-PV2).

@alexard3923 2 ай бұрын

I know that a long time ago of this video but I want to buy for my GPU 3090 ti I have 12 on one side and 3x8 connectors of the psu I can use that one that shows in the video because I'm searched for a day and everyone talks about the series 40, that has 12v and 3x8

@ebenflow 2 ай бұрын

Correct me if I'm wrong, but this *doesn't* need to be plugged in to an ARBG header assuming you use the USB header instead?

@TheProvokedPrawn 2 ай бұрын

Correct

@ebenflow 2 ай бұрын

@@TheProvokedPrawn sweet, thanks for the reply!

@zegfrid1907 3 ай бұрын

My strimer does noy click in my GPU and if I pull it cable out it just comes off. I an worried that this is not safe. I am using 4070 Ti TUF and strimer plus v2 8 light guide

@evil-6929 Жыл бұрын

What is the rog motherboard in the video ? And when the cable will in the market ?

@TheProvokedPrawn Жыл бұрын

There are two motherboards. The Z690 Formula and this kzfaq.info/get/bejne/aK-BdtGc37HYoKc.html . It should be available now.

@kwesiwilliams1188 Жыл бұрын

First time builder here. If I ordered cables off of Cablemod would it make sense to get these?

@tatti2720 Жыл бұрын

If you were to get these, the cablemod cables would kind of be a waste of money, but they definitely will work together.

@kwesiwilliams1188 Жыл бұрын

@@tatti2720 thank you very much for your response.

@Chefmia5150 Жыл бұрын

I made the same mistake. Not realizing that the new strimers would release days after I ordered the cable mods. I mean... It wouldn't be terrible to have a spare set of really swell cablemod jawns in the backup toolkit.... (trying to convince myself that its okay to by the strimers after the fact)

@kwesiwilliams1188 Жыл бұрын

@@Chefmia5150 same. Kinda pissed but I don't know if I'm just gonna go ahead and get the new Strimer.

@stefanllegaard1547 10 ай бұрын

Is that the same controller that comes with the triple-pack fan kit?

@TheProvokedPrawn 10 ай бұрын

@LukeBroadhurstfilm Жыл бұрын

Would had loved to see how the different versions look in action. The 12 LED looks a little too chonkey

@TheProvokedPrawn Жыл бұрын

Fair feedback. I'll probably use the skinnier one in the next build

@LukeBroadhurstfilm Жыл бұрын

@@TheProvokedPrawn does the higher count LED have more rgb presets to choose from? Lian li say in the product page 12 lighting guides and for the thinner cable it’s 8 lighting guides. Does this translate to RGB preset count?

@Maximius38 11 ай бұрын

PLEASE can you help me to get the right cables for my setup - PNY GeForce RTX 4090 24GB XLR8 - Coolmaster MWE 1250 gold - GIGABYTE Z790 AORUS Master DDR5 thank you

@karllagangan5807 2 ай бұрын

What pin should i use for my Gigabyte Rtx 4060 aero oc ? Anyone?? Thanks!

@harrisismail1413 Жыл бұрын

Does anyone know if the strimer plus v2 24-pin works on an AM5 motherboard?

@TheProvokedPrawn Жыл бұрын

There's no logical reason it wouldn't

@rens111111 24 күн бұрын

could i use the nvidia adapter to connect it to the strimmer?

@MhillPlays 20 күн бұрын

The Strimer would replace that adapter, just get 3x 8pin to 12VHPWR Strimer.

@rens111111 19 күн бұрын

Thing is here in my country that x3 8 to 12 strimer isn’t available yet. Only the 12v to 12v. You reckon its safe to daisy chain the nvidia adapter to strimer?

@sicnovaa4743 9 ай бұрын

I’m confused so You can’t do it like he does it in the video with one cable connected to the strimmer

@buffsuki7683 Жыл бұрын

So, I only have two USB ports, one is meant for the NZXT AIO that I have plug in a splitter and the other USB port is for the fans, I have the streamer connected plugged into the other free NZXT splitter USB but they don’t light up, is it because of the lack of power from my PSU 750Wattage or do I need a usb power hub instead of a splitter???

@TheProvokedPrawn Жыл бұрын

A usb hub should work tbh. Can you try switching the ports around?

@buffsuki7683 Жыл бұрын

@@TheProvokedPrawn I did actually! I swapped the streamer USB into the MBO and the fans in the Splitter with the NZXT AIO, the fans spin aggressively, but had no RGB, but the streamers RGB immediately turn on

@TheProvokedPrawn Жыл бұрын

@@buffsuki7683 super weird. How many USB connections does the splitter take. Maybe try them all through it? Could be a faulty connection

@TheProvokedPrawn Жыл бұрын

@@buffsuki7683 this might help as well kzfaq.info/get/bejne/rtN8fLhllbuzhn0.html

@buffsuki7683 Жыл бұрын

@@TheProvokedPrawn Just two, and yeah that’ll make sense, when I plugged both the fans and the streamer lights it pretty much did the same thing, I’ve already order a USB Hub that connects through SATA so I think I’m just going to remove the splitter entirely and hope it works

@masseffectist 7 ай бұрын

Is it risky putting these on the 4090?

@dkz3462 6 ай бұрын

Curious as well..just got a 4090

@jigsaw4794 Жыл бұрын

Can I use this cable with a rtx 3070 founders edition

@TheProvokedPrawn Жыл бұрын

No. It's for 40 series with 600watt cables

@funplaymix7710 Жыл бұрын

Christ its sickening how large some of these GPUs get. BTW, vertical GPU mounting shaves a few degrees of temps vs horizontal. Just did a Furmark stress test. I have the same case as you.

@sorvex9 Жыл бұрын

Its just the cooler that is big

@danielhatch5873 Жыл бұрын

Would one of these work for the 3090ti?

@derklee Ай бұрын

U tryna flex?

@Gawe5lite_med 25 күн бұрын

Which GPU?

@MaddyMF 10 ай бұрын

How to connect to icue

@dfqnexxus3710 Жыл бұрын

the question its how to chose the right cable ? it depends on your power suply or the graphic card ?

@TheProvokedPrawn Жыл бұрын

Well, these are for the 40-series Graphics card, so it depend on your PSU really. If you have a standard one with 8pin PCIe cables, then that's the one you choose. If you have the 12VHPWR ATX 3.0 PSU connection then choose those ones (the fat or thin one depending on your preference).

@dfqnexxus3710 Жыл бұрын

@@TheProvokedPrawn yeah I figured it out mine it's an asus rog strix 850 Gold so I'm gona have to use the tradicional 8 pin pci conector I just hope this psu it's enough for the 4080 that I'm planing to buy

@Kishinoo Жыл бұрын

@@TheProvokedPrawn i have rm850x but i dont know which to buy can you help me pls ?

@eliadbu Жыл бұрын

@@Kishinoo buy the one that connects to 3x8 pin connector.

@Czzr-ys7rw 4 ай бұрын

Wait 600 w is that for each like both cables 600w so you’ll need a 1200w for a gaming pc cuz the cables are 600w

@HansGrub 10 ай бұрын

So is this version now compatible with the 3090ti as well?

@BYFYGaming 9 ай бұрын

Eh. I prefer it be the same size as the connector in width.

@kngjojo6944 6 ай бұрын

So I need a controller

@Hunterrr. Жыл бұрын

So this doesn’t plug into the power supply?

@TheProvokedPrawn Жыл бұрын

Not directly. It's an extension

@Dream-yq2et Жыл бұрын

you shoulda shown it with the gpu vertically mounted

@TheProvokedPrawn Жыл бұрын

oh I'm very sorry.

@Dream-yq2et Жыл бұрын

@@TheProvokedPrawn no worries i was just curious how it looks vertically cause thats how i have my gpu mounted i also have a 4070ti with the connector in the center so i dont even know if its gonna look alright

@TheProvokedPrawn Жыл бұрын

@@Dream-yq2et i am planning on doing a new build soon and probably doing it but it was either get a video out now (at the embargo time) or wait 2 weeks for the sake of extra footage... So I went with the first option 💩