Yes it is. It doesn’t give at all when you walk on it

Where did you find it for $699? Just curious because now its $899 at sams and i really want one

@@dianaherrera4305 it was on sale back in May/June at Sam’s Club in Delaware.

Yea there is spots where you can install lag bolts on the floor. I saw them at a later time lol

Yea man step by step. Glad you liked it Ryan

Yea it seems like a good shed so far

Yes it’s a cool little project. I think I worked on this about 30-45 minutes a day for about 4 days and got it done

Not bad at all

Thank you !

I have the video of the floor on my channel. Skim through it and you will see it

Glad you liked it and consider subscribing

Thanks 😊

Nice! Perfect weather to set it up let me know how it goes

Yea you can do that I just didn’t want to take a chance. Plus I did mine over a few days

Hammer drill, you should work with the handscrew guy. Your hammer drill probably has drill, screw, and hammer drill feature.

I just like to use a screw driver for plastic stuff. Always. I don’t care if it’s 700 screws to fill.

You’ll love it. Make sure you bring home two boxes. It has two long boxes

Same here, purchased in Illinois $699..Good luck!

If you can do that in 1-1/2 hrs you need to change your watch!

@@cayrick or the fact that I did 3 builds a day for over 2.5 years so yeah I have everything memorized and can do it fairly quickly 😂

Wood clamps save us every time

Damn man. That’s pretty good a stretched it out a little bit but did it in better whether If you like this video give me a subscribe lol there is plenty more on my page money saving fixes glad you like it holler anytime

That’s not bad

Glad you like it

If you need help watch my video 1,000,000 times start to finish 👍

It’s not that bad lol just do a little each day or every other day and it’s fun.

20 minutes a day for about 2 weeks. I’d say 4 hours

Maybe 2.5 if your not recording

Honesty if it’s gravel just put a weight in each corner like a 12 by 12 inch paver block. You should be good. Plus your going to have all your stuff in it as well.

amzn.to/3WOtBjT

Thank you.

@@mikexiong87 your welcome

Yes it’s on my channel. Subscribe and you’ll have it. Thanks

Yea it’s not fair to have it like that but I guess it’s a supply and demand thing.

Nothing yet. We almost melted though :/

Gravel is fine just get it level

Yes I made it separately. There’s a video on how to build it on my channel. Check it out

It should be built on location

Seems to hold up well. No leaks so far

@@MendandMake thanks for letting ne kniw as I wNt ny pc there going ti run solar piwdr on it as well. H9ma do some custom work to it just wanted to make sure leaks don't happen I can always fix that but I would rather it's leak proof.

Some people deck them out with insulation and make it a gaming room

@@MendandMake will give it a go thanks again.

Yes

If you have 3 corners snapped in place, it says you will need another set of hands to get the fourth corner in place. There is a little shifting with it but it will work.

You need a truck for sure and they are really heavy Jack

Lol. I took it off

So many option with that leveling out a truckload of just base( small rock) will do the trick. I just made this foundation because I just wanted it really solid because I weigh a lot.

I have the video on how to make the foundation on my channels if you wanna see how it comes together. I believe anyone can make it. Please consider subscribing if you want to see more fix and build videos. It could safe you a lot of money. Thanks again for watching and I hope this video helped you out

Yes you will.

I believe sams was charging like $350.00 for installation

Yea it is about that price here now

They give you a few extras

Thanks. I just did an 8 x8 frame. The video on the foundation that I did is on my page as well. I used 2x6x8 I believe. Hope this helps

Just seen the video on foundation. Thanks.

It will fit

Look at the very end of the video. I put a standard lawn mower in there so give you reference.

Nope you need at least a 6 ft bed plus need to drop the tail gate to get a couple more ft

@MendandMake thanks for the reply. But I already got it today. Had to tie it and leave the back open halfway.

@@gagiktagaryan10 I'm thinking of doing the same since I'm not far from the store. Were they able to help you lift it into the truck?

@limbanipablo8362 they help load it

Honestly,20-25 minutes a day when I would get off work. I did 20-25 minutes per day Monday through Friday for 2 weeks. So 3.5 to 4 hours.

7 ft or so. You need a truck for it or small trailer for sure. Heavy

Yea man for sure. I probably did 20 minutes a day for a couple weeks and got it together. Just doing like a little before my kids would get home then hit it again the next day. Easy to assemble

@@MendandMake thanks hopefully I can order it. Sams is saying out of stock. Might have to go with Rubbermaid brand and home depot.

Wife and I assembled ours yesterday. Bought 36 16x16 concrete pavers for base. Half the price of (GOLD) I mean wood. Took us approx 6.5 hours with breaks of course. Had same problem with door needed to be shimmed. Looks good and enjoyed the video.

@@bradleywilliams2235 thanks where did you buy it from? Sams is out of stocks

@@DevD750 We purchased ours at a Sams club about a month ago and have just been waiting for the weather to warm up some. I actually saw someone the other day at Sams buying the display model.

i did it by hand so i did not strip the screws in the plastic

Watch it until the end:)

I worked on it for 20 minutes a day for 2 weeks

Roughly 200 lbs. on the platform I build for it you should be able to shift it around a little on your own

That shed is really heavy. Make sure you eat your wheaties.

@@zachary4225 lol...we did. We took the roof off first ...four guy lifted it over the fence....then lifted the rest over. Still can't believe we did it.

If you did I’m sure you would have a separate property tax on it in Cali lol

Nope not in Cali. Its 850. Still not bad though.

Yea it went up to 850 at the sams here in San Antonio. I bought it a few years ago. It’s a nice storage though

@@MendandMake Thanks for the update on the integrity of the shed . I was pondering on purchasing it, you have solidified my decision. Ty

@@roderickarina for some reason someone said the instructions were awful. I didn’t think so. Super easy to build. Of just watch my video. I didn’t deviate from the instructions

Yea I didn’t wanna risk stripping the plastic

It’s been ok so far 1 year in. We will see what 3 yes looks like. I needed a small storage for about 2 years and didn’t wanna drive 2 miles to the nearest storage unit.

@@MendandMake hopefully you don't have issues. I just live in mountains where it shows a lot and high winds...

Damn. Yea might be some harsh weather for that storage.

@@MendandMake yes I live in area wish harsh weather in the mountains. If you live in moderate climate where not much wind or snow then it's probably fine...

@@thadlogan51 San Antonio not too bad on the weather here

I’m not a master mechanic and did not have any trouble with the directions… sorry it was a pain for you

Couldn't be further from the truth. Do Not regret mine at all.

This guy probably builds those custom sheds and he is mad that this thing is better priced and will last twice as long. Master mechanic 😂😂😂🤣🤣🤣

@EDCMancave I don’t know much about being a mechanic but I didn’t have a problem getting it together… but it’s not a car so there’s that

Old and senile boomer. This shed is perfectly fine.