Lifetime 8' x 7.5' Outdoor Shed | Lifetime Assembly Video

Рет қаралды 384,666

Күн бұрын

Пікірлер: 224

@LifetimeProductsAssembly 3 жыл бұрын

@otachief6442 2 жыл бұрын

@suegesmond7756 8 ай бұрын

😂

@allenbenetrix5213 29 күн бұрын

All your material is warped and trash. Your company needs to do better

@MatthewJemilo 22 күн бұрын

I did it!! It took about 10 hours by myself but the video was so helpful! 10/10 get a friend for the 6 roof panels and the doors MY GOD that was a struggle

@keri1500 8 ай бұрын

Thank you for the video. I'm a 55 yr old woman and put this 8 x 7.5 foot shed together alone in about 8 hours. I managed on my own with the help of wooden shelves to help lift for the door mount pins, an extra heavy ladder for outside pressure and a couple large clamps for the Gables and door mounting. The video was a life saver! Thank you!

@LifetimeProductsAssembly 8 ай бұрын

Wow. Consider us impressed!

@JessicaRodriguez-rx3ld Ай бұрын

Husband just bought it It seems almost impossible to assemble for me but your comment cheers me up 😇

@timothycoleman8916 2 ай бұрын

I'm building mine on the wood frame, as the instructions show. But I want to be able to move it (gently) around. So I put 2, 6"x6"x10' treated post under it, cut as skids. Mine will house the devices for a solar off grid power, for my farm lake. Looking good so far. Thanks for the assembly video.

@haniassaadful 3 жыл бұрын

Amazing Video. Thank you so much for your help! It would've been extremely difficult to set it up without your instructions.

@nicorooks2974 2 жыл бұрын

Advice for anyone else building it. The “slight downward pressure” is a lot harder than it looka

@jacksonthai4923 2 жыл бұрын

Almost blew my back with those corner panels

@RJJackson09 2 жыл бұрын

Lol! For sure. He put his whole body into it

@thelatest1968 2 жыл бұрын

I had a hard time trying to hear the click!!!

@dorothymccarty5903 Жыл бұрын

Can NOT GET the second corner panel to snap in. Help

@nicorooks2974 Жыл бұрын

@@dorothymccarty5903 I had a hard time as well. Have you tried forcing it

@RJJackson09 2 жыл бұрын

Thank you for this video! I was able to ditch the manual except for some hardware identification and the mirror orientation on the side panel (couldn’t see your orientation in the video). Had no one to help so it took about 6.5 hours. I too struggled with attaching the rear roof panel to the rear gable and rear roof cap. I stuck my screwdriver into the rear roof panel hole to give me leverage to pull it where it needed to go to align the holes. For the roof cap, I figured that the more you bend/fold it, the easier it is to align. You can even screw half of it in, then push up on it and screw in the rest. That was a lifesaver for me. Hope this helps someone

@LuisNunez210 2 жыл бұрын

Damn that would have saved me

@rbarron007 Жыл бұрын

Me too. I used the manual for hardware identification as well.

@kurtmiller2254 3 жыл бұрын

Just got my shed can't wait to put it together . Spent the day today laying a paver foundation for it . Will drop another comment once it's done on installation and what I think about shed over all .

@justaweirdweeb2998 3 жыл бұрын

Guess they still not done lol

@kurtmiller2254 3 жыл бұрын

@@justaweirdweeb2998 yes shed is finally done but was missing a piece waiting on lifetime to send it out . Installation is not bad at all does take some time as I did it all by myself . Put majority of what I could together in the house then carried to backyard . Didn't want my Dogg's to mess any of the pieces up . Over all very happy with the shed and how it looks . Now to move items from garage into the shed .

@IWBVS 2 жыл бұрын

@@kurtmiller2254 what kind of pavers did you use? I'm thinking of using pavers instead of a wood frame or concrete pad. How is it holding up?

@trd_ftw 10 ай бұрын

@kurtmiller2254 how long did it take you to do this?

@Given2Fly7173 2 ай бұрын

Buying this tomorrow….cant wait to complete this in less than an hour like this amazing person!! 😂😂

@kg6aaw 2 жыл бұрын

seriously who would not give 5 stars. great video. thanks

@hoganhaake Жыл бұрын

Assembled ours yesterday. Watching the video first put wonderful perspective to the written instructions and helped it happen with confidence. It took 2 of us 5 hours to install our shed. We used a paver base that was mostly even and didn't have any issues. Wonderful product and company!

@roblong5765 Жыл бұрын

Thanks for the clear explanation and how to video. Very helpful, made assembly much easier. Awesome job guy's.

@kwameglarbi900 2 жыл бұрын

Video was very helpful and simplified the assembly compared to the set up manual. Amazing step by step guide. Thanks 🙏

@donaldscott1954 2 жыл бұрын

I must say a big thank you 🙏🏽 this video help me so so much

@bentonwong4045 3 жыл бұрын

It is a great video showing the techniques for the installation and not just how to do it. I hope you can stress the importance of the 8' panel at the back wall of the shed. It is also for reinforcement of the shed and not just for storage.

@dalealbright8648 2 жыл бұрын

Well done! The video has answers that should be in the printed material as I'm one to learn by reading, but the video made the assembly very easy. Thank you for the video!

@ogi6694 Жыл бұрын

It took me and my dad 8 hours 😢

@gerardoperez4089 3 жыл бұрын

Thank you for making this GREAT video with all the details in how to build it with simple explanation step by step. You guys are awesome Well done

@DJNaturaultone Жыл бұрын

Did mine today. Great video thanks

@JorgeRamirez-gd1gh Жыл бұрын

Gracias muchachos por excelente video de como armarlo paso a paso; lo instale sin ninguna complication. Muchas gracias

@zachary4225 Жыл бұрын

I brought one a few months back. Next week I’ll build it. Hopefully it goes as smooth as this video.

@LifetimeProductsAssembly Жыл бұрын

Let us know if you need any help and how the overall assembly goes!

@taaappp 2 ай бұрын

How much do the boxes weigh?

@mehulpatel770 2 жыл бұрын

Hi there, for section 4.4 where you attach the door latch to the left door. The strike plate provided doesn’t align with the holes on the front and back. Is this strike plate necessary *part AIA. Or can i just attach the latch?

@marselad9953 10 ай бұрын

Thank you for this amazing video and great instruction !!!!

@dorothymccarty5903 Жыл бұрын

Can NOT GET THE back first corner panel to snap in. HELP as we tried for several hours.. it just will NOT SNAP IN

@SriRam-yq4id Жыл бұрын

Excellent Video

@Skaterjessy019 2 жыл бұрын

Um what if the holes don’t line up during step 7.1

@jaym1244 2 жыл бұрын

Is section 8 necessary? The shelf interferes with the tall shelves we want to put on that back wall. I fear that shelf may double as a stability point, can we omit it?

@LifetimeProductsAssembly 2 жыл бұрын

Shelves are not required for the assembly. They are just accessories.

@user-mp1fs5cp5d Жыл бұрын

Does anyone know where the little black piece goes? It’s called AIW. Looks like part of the shelf almost but there’s nothing in the manual about it or in the video

@KayakKingdom 2 жыл бұрын

way better than the instructions. thank God for this video 😆 🤣

@Playlets Жыл бұрын

I just built this. Ask me anything! Took 8 hours including a lunch break and lazy start with two people.

@tx_railfan4793 Жыл бұрын

Y’all make it look so easy to install but honestly it’s a pain 😂

@lavin578 2 жыл бұрын

Watching this video before assembly, I had a question - there's hardly any space for me to assemble the back gable as the shed will be on a concrete pad at the rear corner of the back yard. Does the front gable need to be done first or can we start at the back and then work our way to the front gable where the doors are?

@LifetimeProductsAssembly 2 жыл бұрын

If you have no other option, you can start from the back. It will not effect the assembly of the shed.

@rbarron007 Жыл бұрын

The right front corner panel did not “snap-in/click-in” for me, but I was still able to complete the shed. It did throw off the leveling a bit on the rear left side but I made it work.

@mrakhsha Жыл бұрын

Having the same issue. What did you do to get in the corner piece (AGW in my case, 19:00) that won’t seem to snap in properly?

@rbarron007 Жыл бұрын

@@mrakhsha I initially left it like that (I did not snap it in), and simply started to screw the wall panels together. But then decided to undo it and made the hole on the floor for that panel a bit larger with a small knife. So I was finally able to place the corner panel in the floor slot/hole.

@mrakhsha Жыл бұрын

@@rbarron007 that is helpful, thanks for your response! I’ll give it a shot

@happycampers4reelz45 2 жыл бұрын

Curious, can you swap what side the window panel goes on? Guessing no.

@LifetimeProductsAssembly 2 жыл бұрын

Yes you can! If you want the window panel on the right side you can do that and vise versa.

@jiml5274 Жыл бұрын

Would you be able to provide the exact dimensions (in inches) for the top of the wooden foundation platform in order to have it fit flush with the sides of this shed?

@ZZCPA1 2 жыл бұрын

Do you know which torque number we should set our impact drills at? I have a regular Dewalt 18V impact drill and I plan on using a number 6 torque number. I didn't find any recommendations about this topic. Thank you.

@LifetimeProductsAssembly 2 жыл бұрын

The torque setting depends on the part of the assembly you are on. As long as the setting isn’t stripping out the screws and is tightening the screws and bolts all the way you should be good.

@ricardovelazquez3014 Жыл бұрын

Muchas gracias por el video. Lo compre e. SAMS Club de Ponce Puerto Rico. Y el video me a sido muy útil. Aunque me sobraron muchos tornillos 🤣

@phantomxjedi 3 жыл бұрын

Can't get the floor panel hooked together. Been trying for 3 days with my dad and stepmom and it just won't go. Any tips?

@LifetimeProductsAssembly 3 жыл бұрын

Make sure your tabs are lined up with the panel on the ground and that the rest of the panel is at 45 degree in the air. It will also be helpful to have someone standing on the other panel so it does not slide out of place. If you have additional questions you can always reach out to our customer service experts. They can be reached at 800-225-3865 or by email at customercare@lifetime.com. Customer Service hours are Monday-Friday, 7:00 am to 5:00 pm and Saturday, 9:00 am to 1:00 pm (MT).

@jpbjr64 Жыл бұрын

Lifetime or whomever can answer this too. I want to install on my front driveway which is all level cement. Do I have to put a sub floor under it for water to drain under it without one whenit/if it rains or when I wash down the driveway? If so, what kind of sub flooring would you recommend I use? Thanks

@allenbenetrix5213 29 күн бұрын

And the way you screwing your floor panel in is a lot different then the way it has mine screwing together

@dr.gregoryc.nelson2020 Жыл бұрын

What is the purpose of the Window latches? I this to allow raising the window?

@Jax281 Ай бұрын

I’m considering buying 8 by 15 one for a small home gym. Can you tell me if the floor is suitable for this?

@Emageon 2 жыл бұрын

How do you secure the floor to the base? Does it need to be screwed to the foundation?

@LifetimeProductsAssembly 2 жыл бұрын

This is with the anchoring process. You can find this at the end of the instruction manual.

@starsandskulls13 Жыл бұрын

Those door bars do not slide in easily like that. I had to widen the openings and still hammer them in.

@jonevans09 Жыл бұрын

Is there a video to secure it to a concrete slab?

@jnfriesen1 2 жыл бұрын

I’m having trouble lining up the last roof panel so I can screw it on. Any recommendations?

@LifetimeProductsAssembly 2 жыл бұрын

Try out this video: kzfaq.info/get/bejne/n7eJptWSmMvMpKc.html

@mikerogs1 2 жыл бұрын

Me too. I used ratcheting straps across the top. One side lined up so I screwed that in, then threw the strap over the the other side and ratcheted them into place

@kingwill4291 Жыл бұрын

Just build mine. Taking a day off work to recover. If it’s not perfectly level I’m gonna pray for you. This assembly video has a lot of try again edits.😂

@lucylivingston1100 24 күн бұрын

Need to install side window

@americorosario1317 Жыл бұрын

The skylights do not fit! Any suggestions?

@itsluna7132 Жыл бұрын

Is it good to change some of the FLU screws mine don’t attach well to the wall causing it to fall any advice ,

@LifetimeProductsAssembly Жыл бұрын

We don't recommend using any other hardware other than our own. Our hardware is specifically designed for our products. If you're having troubles with the walls staying up even with the help of another person holding the walls up as you connect them together, I recommend reaching out to our customer service team so they can provide you more tips. They can be reached at 800-225-3865 or by email at customercare@lifetime.com. Customer Service hours are Monday-Friday, 7:00 am to 5:00 pm and Saturday, 9:00 am to 1:00 pm (MT).

@greganastacio423 Ай бұрын

My shed one of the corners not fit okay?back corners window side

@LifetimeProductsAssembly Ай бұрын

Try reaching out to our customer service experts. They can be reached at 800-225-3865 or by email at customercare@lifetime.com. Customer Service hours are Monday-Friday, 7:00 am to 5:00 pm (MT).

@jorgecabrera7549 3 жыл бұрын

Thanks for the video is well replicated

@serhiishytikov5811 2 жыл бұрын

Hello, if I would like to have a window on other side of the wall. Would be possible to install it there ? Thank you

@LifetimeProductsAssembly 2 жыл бұрын

Yes, you can!

@allenbenetrix5213 29 күн бұрын

Does your company know how to put people on hold or have call waiting

@Reportermel30 Ай бұрын

For the base is a gravel base ok!? I really can’t pour cement

@LifetimeProductsAssembly Ай бұрын

Gravel is not a foundation that we recommend. If you can't pour a cement pad, you can build a pressure treated wood platform. Refer to your manual in section 1 for the instructions on how to do that.

@sanantoniodood 2 жыл бұрын

What are the weight and dimensions of the 2 boxes when you pick it up at the store for an 8x7.5 shed? I want to get one at Sam's but I only have a car with the rear seats go down.

@LifetimeProductsAssembly 2 жыл бұрын

For this particular shed, the box dimensions are 95.31" x 32" x 10.75"; 147.5 lbs and 95.31" x 32" x 9.63"; 218 lbs.

@toddcole5663 2 жыл бұрын

I was able to get it home in a mini van with the front seats all the way forward and the back seats just folded not removed. I was originally going to put it on top of the van. Hahaha I thought twice and just had a super uncomfortable ride home. Thank God only a 10mi. drive lol.

@lisacobb6274 Жыл бұрын

I rented a truck.

@B35474 3 жыл бұрын

Box says: Foundation not included. What does that mean exactly? Will it still have the bottom part you put in this video?

@LifetimeProductsAssembly 3 жыл бұрын

The foundation is the cement or wooden platform that needs to go under the shed. The flooring is included but not the foundation. Since video is about the assembly of the actual shed it self, we do not go over the preparation for the foundation.

@B35474 3 жыл бұрын

@@LifetimeProductsAssembly I appreciate the quick response.

@christina5747 Жыл бұрын

I have a leftover black plastic piece approximately 12”x5” (rough guess) it’s definately not the long shelf for the back wall. Does anyone know what it is? Kind of looks like a small step maybe.

@DianaD- Жыл бұрын

We also had the leftover piece. Would love to know what it’s for?

@LifetimeProductsAssembly Жыл бұрын

This is just to help align things together if needed and for when you use the mallet on the shed. It's supposed to be used as a tool!

@toneh.1938 Жыл бұрын

The shelf doesn’t line up right and I made sure everything was assembled correctly up to that point, I just tripled check and everything is put up right. Matches everything in the video and the manual. Don’t understand what could be wrong.

@LifetimeProductsAssembly Жыл бұрын

Is your shelf at an angle or is it not lining up with the holes? If it's at an angle, you may need to adjust your brackets. If it's not lining up with the holes you don't need to align it directly to the holes, just close enough to keep it balance. If you have additional questions you can always reach out to our customer service experts. They can be reached at 800-225-3865 or by email at customercare@lifetime.com. Customer Service hours are Monday-Friday, 7:00 am to 5:00 pm and Saturday, 9:00 am to 1:00 pm (MT).

@mikejohnson9163 Жыл бұрын

The corners was not fun. Also had a tough time getting the roof panels lined up but all in all not to bad. The video helps a lot more than the instructions that’s for sure. Lol

@nathanielrobbins7258 11 ай бұрын

How did you get the last roof panel on I’m having the hardest time getting it to line up

@natashawelch6123 Ай бұрын

Same+

@sheridasharpe5072 Жыл бұрын

Realistically how long does this take to put together straight out of the box? Do you need a second person to assemble? Does it have to be attached to a foundation or can it sit in the grass and be fine? The place I live has a cement slab but it is holding an old rusted shed I don't want to pay to remove their waste so I am wondering if it will work well and stay in place without attaching it to a foundation, thank you. Nice video, had me thinking I can do this solo but let's get real, so I know what I need to do before I order this since the store says it doesn't deliver, thank you.

@LifetimeProductsAssembly Жыл бұрын

The amount of time it takes to build is based on you and your helper. It can take several hours or a couple of days. A second person is essential in some or all steps. Having a helper will ensure that thing align properly and it helps things stay in place. Foundation is required for all our sheds. A foundation will make things all stay in place and help with the longevity of the product.

@timkappel2898 Жыл бұрын

After step 6.4, why not anchor it to the concrete pad at that time? Why wait till the whole shed is built?

@Oogus67 Жыл бұрын

I anchored mine in place after getting the floor down and positioned where I wanted it. Didn't have any issue.

@Opsen24 2 ай бұрын

Thank you

@ryan7868 2 жыл бұрын

thanks for this makes it look easier to understand. how long will this take someone that's diy hands on inclined?

@LifetimeProductsAssembly 2 жыл бұрын

It really just depends on the person. It could take hours or days. It's different for each customer.

@joellenwagner760 6 ай бұрын

I did it. All by myself.

@extremebat7944 2 жыл бұрын

For step 5.3 there is supposed to be pre cut holes in the metal rods but there is nothing there

@LifetimeProductsAssembly 2 жыл бұрын

Love to take a better look at this. Can you send pictures to our email? Please send them to email at customercare@lifetime.com. Customer Service hours are Monday-Friday, 7:00 am to 5:00 pm and Saturday, 9:00 am to 1:00 pm (MT).

@rodneycoffey7393 2 жыл бұрын

Can the window panel b put on the opposite side ?

@LifetimeProductsAssembly 2 жыл бұрын

Yes, it can be!

@CB27 Жыл бұрын

I'm thinking about buying a couple of Lifetime sheds - probably the 8'x5' ones. Anyone here had their's for a few years now? How well has it held up - especially the doors? Any bowing/cracking of the plastics happening? I've read other reviews saying you can't really rely on the warranty. Ideally I want this thing to last me like 20 years or more. Are my expectations realistic?

@Carelock 9 ай бұрын

No…

@YamiFrankc 2 жыл бұрын

Hello how can I get a replacement pack of all the screws and bolts needed to build this? Thank you

@LifetimeProductsAssembly 2 жыл бұрын

Replacement parts are available and can be ordered through our Customer Service Department. Our Customer Service Team can be reached at 800-225-3865 opt. 1 or by email at customercare@lifetime.com. Customer Service hours are Monday-Friday, 7:00 am to 5:00 pm and Saturday, 9:00 am to 1:00 pm (MT).

@tyronemartin2220 3 жыл бұрын

Do you need concrete Fondation for 8 x 7.5 shed?

@LifetimeProductsAssembly 3 жыл бұрын

All our sheds require a foundation to be built on. Failure to do so will cause issues while assembling.

@2326ralvarado 2 жыл бұрын

@@LifetimeProductsAssembly can I use 4x8x14 half cinder blocks as a foundation?

@LifetimeProductsAssembly 2 жыл бұрын

@@2326ralvarado We only recommend a foundation made out of concrete or wood. The cider blocks will still have cracks in it not leaving the foundation leveled which could make it difficult to assemble.

@saigyl9149 Жыл бұрын

i'm absolutely confused on why the trusses are assembled first in the instructions

@123457474869 3 жыл бұрын

I was thinking of installing a gravel pad as the foundation for my shed. If I compact the gravel, can I build this shed directly on top of the gravel, or do I still need a wood/concrete base?

@LifetimeProductsAssembly 3 жыл бұрын

We only recommend wood/concrete foundation. Creating a foundation out of gravel will not help the shed stay in place even if it is compacted. You will also have troubles assembling if you don't have a flat surface.

@Aussiegirl2208 2 жыл бұрын

I have a flat area of grass in our backyard. Will this be ok for a shed? I don’t know how to do anything else to the yard for a shed. 😬

@LifetimeProductsAssembly 2 жыл бұрын

Yes. As long as it’s in a leveled surface, and you have the recommended foundation you will be good.

@Aussiegirl2208 2 жыл бұрын

@@LifetimeProductsAssembly would a gravel bottom be good or is cement recommended for this shed?

@LifetimeProductsAssembly 2 жыл бұрын

@@Aussiegirl2208 We only recommend using a concrete or wooden foundation.

@lindamendez9179 5 ай бұрын

Can the side window be on the opposite wall?

@LifetimeProductsAssembly 5 ай бұрын

Yes, you can put the window wall panel on the side wall or on the back wall.

@Shokez516 3 жыл бұрын

Is there supposed to be leftover screws once your finished or did i miss something?

@Kevinlinaresroller 3 жыл бұрын

If you paid attention and went through each step with patience and double checked with the instruction manual, then yes, it does seem like there are some extra screws in thr bags, at least for me it was the case!

@Shokez516 3 жыл бұрын

@@Kevinlinaresroller ok thank you! I was worried about water leaks lol but yes i went through every single step and I think those extra screws might be for more separate bought shelving

@RJJackson09 2 жыл бұрын

I had a lot of extras

@rbarron007 Жыл бұрын

Same here. I actually lost like 3 screws and was worried, but ended up with many extra screws

@drewg3535 3 ай бұрын

Anyone else have alot of hardward left over? And an extra window?

@extremebat7944 2 жыл бұрын

On the last two roof panels the one the left is curving up and is not allinging with the roof or the wall

@LifetimeProductsAssembly 2 жыл бұрын

Please send pictures to customercare@lifetime.com of your roof panels so we can determine further action and to help you have a better assembly experience.

@rbarron007 Жыл бұрын

Have someone help you push up or down on the metal frame of the roof so help align the holes. I had the same issue. Probably due to misalignment/unleveled base/foundation.

@extremebat7944 Жыл бұрын

@@rbarron007 thanks I figured that out a month ago because it was not aligning

@tezohurt8945 2 жыл бұрын

I put the bar in wrong does anyone know how to take it out the door

@LifetimeProductsAssembly 2 жыл бұрын

What step are you on? Just want to make sure we help you on the correct step.

@RJJackson09 2 жыл бұрын

Same. I used a pair of locking pliers (vise grips), gripped the bar, and pulled it out.

@kylestenger15 3 жыл бұрын

My rear right roof panel all the holes line up with the juice but don’t line up with the rear gable. All the sides are snapped in and plumb, starting to wonder if there is a defect. Had to stop due to snow storm

@LifetimeProductsAssembly 3 жыл бұрын

We’d love to take a better look at this so we can help you finish the assembly. Please reach out to our customer service team and send them pictures of your part and where you’re having difficulty. They can be reached at 800-225-3865 or by email at customercare@lifetime.com. Customer Service hours are Monday-Friday, 7:00 am to 5:00 pm and Saturday, 9:00 am to 1:00 pm (MT).

@josephbascue 3 жыл бұрын

Did you figure out the problem?

@Kevinlinaresroller 3 жыл бұрын

Same problem, but it can be fixed by having someone push the roof panel until the holes match and then screw them in place 😭

@salmeronabraham 2 жыл бұрын

Step 4.1 from the instruction manual and video seem to be different.

@LifetimeProductsAssembly 2 жыл бұрын

This video is meant to be used as a companion to the assembly manual and not a direct replacement. In step 4.1 the long tube can be inserted into the door while facing upward or laying down on the ground, the process should still be the same. We do have several assembly help options available if you run into more questions, including; this video tutorial, our new BILT app, and our customer service department is always a great resource. They can be reached at 800-225-3865 or by email at customercare@lifetime.com. Customer Service hours are Monday-Friday, 7:00 am to 5:00 pm and Saturday, 9:00 am to 1:00 pm (MT).

@hostileforces 2 жыл бұрын

Is there supposed to be leftover screws?

@LifetimeProductsAssembly 2 жыл бұрын

Yes! Sometimes there are extras in case you strip out some of them during assembly.

@leah1465 2 жыл бұрын

Is there a video for the 8x15 model? I couldn't seem to find it.

@LifetimeProductsAssembly 2 жыл бұрын

Not yet. Do you know your model number by chance to see if we can refer you to a BILT video?

@leah1465 2 жыл бұрын

@@LifetimeProductsAssembly it is the 8x15 model 60075

@LifetimeProductsAssembly 2 жыл бұрын

@@leah1465 There's no KZfaq video, but we do have a video on BILT. BILT is a free app that can be downloaded on your device that will give you a 3D video on how to assemble this shed. When you download the app, type 1202307 into the search box and you will find the assembly video to your shed.

@leah1465 2 жыл бұрын

@@LifetimeProductsAssembly thanks so much!

@shaunryan9278 9 ай бұрын

There is no "alignment notch" on the roof panels. Had a hell of a time trying to get those panels lined up.

@LifetimeProductsAssembly 9 ай бұрын

We're sorry to hear that you had a hard time with this assembly! The roof panels have an alignment nub that fits into the notch on the truss.

@natashawelch6123 Ай бұрын

Same problem! How did you get it figured out?

@allenbenetrix5213 29 күн бұрын

How can I talk to somebody on here

@tarranceturner8909 2 жыл бұрын

Missing parts from pack GQP (ADZ) (EYQ)

@LifetimeProductsAssembly 2 жыл бұрын

Missing parts can be ordered through our customer service department. They can be reach at customercare@lifetime.com or through phone (800) 242-3865 M-F 7 a.m- 5 p.m MST.

@caifasjz1-157 Жыл бұрын

Is the flooring included with the purchase of the shed?

@LifetimeProductsAssembly Жыл бұрын

The flooring of the shed is included. The foundation is not.

@bdigz1426 Жыл бұрын

I just dont know what im missing... last 2 ridge panel where they over lap. Screw just doesnt grab that last panel its like i am a 1/8" too short 🤷‍♂️ yes all others grabbed and went smooth... these 2 last screws are the bane of my existance 😅

@LifetimeProductsAssembly Жыл бұрын

Sorry to hear your having troubles. We'll be able to better help and determine what may be the issue with pictures. Can you reach out to our customer service team and send over some images they can trouble shoot what could be going on? They can be reached at 800-225-3865 or by email at customercare@lifetime.com. Customer Service hours are Monday-Friday, 7:00 am to 5:00 pm and Saturday, 9:00 am to 1:00 pm (MT).

@bdigz1426 Жыл бұрын

@@LifetimeProductsAssembly i just went and bought 2 1/16th" longer screws and it worked great.

@allenbenetrix5213 29 күн бұрын

All my material is warped

@natashawelch6123 Ай бұрын

This is not easy to put together. We are having a hard time getting the roof to align right.

@LifetimeProductsAssembly Ай бұрын

We apologize about the frustration with the assembly of your new shed. What type of foundation is your shed built in? That could be causing the difficulties. Try watching this video on how to align your roof panels- kzfaq.info/get/bejne/n7eJptWSmMvMpKc.htmlsi=qptvvpzaxJnvzPpK. If that doesn't work, give our customer service team a call and we can troubleshoot the issue with you and see if we can figure out what is happening. They can be reached at 800-225-3865 or by email at customercare@lifetime.com. Customer service hours are Monday-Friday, 7:00 am to 5:00 pm (MT).

@Jugganaut05 Жыл бұрын

Great video. Now where do I hire someone to assemble it for me?

@LifetimeProductsAssembly Жыл бұрын

Expert assembly can be scheduled by contacting 1-800-336-3865 Opt. 1. They are available M-F 8 am to 5 pm MST. Prices varies based on product, location and unique requirements.

@allenbenetrix5213 29 күн бұрын

I can't even take it back

@James_M_Jay Жыл бұрын

How long does this take to assemble for a professional carpenter?

@LifetimeProductsAssembly Жыл бұрын

Timing of it all is tricky to say since it depends all on you and who you have to help you. It can take a couple of hours or it can take a couple of days.

@stbralex7187 2 жыл бұрын

Come 11:48 put the tube in my door because I dought you can do it that easy with mine

@LifetimeProductsAssembly 2 жыл бұрын

Sometimes these square tubes can be tricky. Our first tip is inserting the square tube starting at the other end. If that doesn't work you can use a rubber mallet on the end of the tube. If that still doesn't work we recommend slightly enlarging the hole that the tube slides into. The final tip is turning the door right side up and hitting the tube on some concert to help it slide into the the opening on the door.

@syann7038 2 жыл бұрын

What’s the email address to get help? The last panel is now lining up with he truss and gable and my shed is bowed?

@LifetimeProductsAssembly 2 жыл бұрын

We're sorry you are having a hard time reaching out to us. Our Customer Service Team can be reached at 800-225-3865 or by email at customercare@lifetime.com. Customer Service hours are Monday-Friday, 7:00 am to 5:00 pm and Saturday, 9:00 am to 1:00 pm (MT).

@CounterStrike-xy7ow 3 жыл бұрын

Can some tell me how long for the installation??

@LifetimeProductsAssembly 3 жыл бұрын

Time on installation is just based on you and who you have to help you. This can be a couple of hours or a day.

@Sam_Mebane 2 жыл бұрын

I finished mine in less than 4 hours with the help of my wife holding screws, and walls, etc.

@Sam_Mebane 2 жыл бұрын

The second shed took 2 1/2 hours. A little experience from the first assembly went a long way.

@CounterStrike-xy7ow 2 жыл бұрын

@@Sam_Mebane make sense. Glad to know.

@jacksonthai4923 2 жыл бұрын

9 hours including the foundation

@jimfindlay8089 Ай бұрын

Floor panels came all warped and bent ,definately didn,t go in as easy as yours,was disapointed by how thin the material was,.

@sonidopantojadpuebla Жыл бұрын

How much is the cost and where can i buy it

@LifetimeProductsAssembly Жыл бұрын

This shed is available at Sam's Club! Here's the link: www.samsclub.com/p/lifetime-8x7-5-feet-outdoor-storage-shed/prod25390625?xid=plp_product_1

@surrelljr 8 ай бұрын

After fighting with it for days, knowing what I know now, I wouldn’t of bought this thing.

@LifetimeProductsAssembly 8 ай бұрын

Sorry to hear this. What part of the assembly is putting up a fight?

@surrelljr 8 ай бұрын

@@LifetimeProductsAssembly the final part of the roof on the back corner would not lineup, it was 2 inches off. I had to force it together. Now that is completely assembled, it is a pretty good product. It just took quite a while to assemble like about four days. a lot of the holes would not line up. However, for $900 they should do the trick nicely now that the project is completed.

@thelatest1968 2 жыл бұрын

The manual is not very helpful.

@LifetimeProductsAssembly 2 жыл бұрын

Hopefully this video will help you!

@mrpet7085 11 ай бұрын

How ghetto, vice grips with a bit. 😂ugh

@LifetimeProductsAssembly 11 ай бұрын

Don't knock if it works! 😉

@57JustFun 3 жыл бұрын

Assembly is nowhere near as simple as this individual shows. Aligning parts is a nightmare. Note, I a pretty decent handyman and typically don't need instructions for anything. This needed a lot of review and innovative thinking to put this together. Hopefully it won't fall apart on the first wind that comes along.

@Kevinlinaresroller 3 жыл бұрын

I am not handy at all, it just requires patience as I am almost done and the only problem i found is like 3 screws that don't tighten and the last roof panel that doesn't match with the holes 😞

@57JustFun 3 жыл бұрын

You are correct, you have to have a patient personality and little help to put this together. It is too easy to strip the plastic out with the screws. I had to go get some oversized screws to compensate for my aggressive screw insertion. So far, the shed is working well for backyard tool storage. Some day I would like to get a 20 x 40 steel workshop. I can dream, not going to happen in a residential backyard.

@rbarron007 Жыл бұрын

@@Kevinlinaresroller i had this exact same problem, what I ended up doing was pushing up on the rear metal bracket and that helped align the rear roof corner