Hidden Magnet Bottle Opener (Dremel Project)

Рет қаралды 6,624

Жыл бұрын

Hi all, here's a simple epoxy and wood carving project for those of you with a rotary tool. Thanks everyone for being here - hope you enjoy this video of me making a magnetic bottle opener, and have a good weekend. Links for the products I used below.
You don't need to invest in a lot of expensive tools for a fun woodworking project! In this video I carved with nothing but a Dremel 4300 rotary tool and the router/flex shaft attachment and I sanded with an orbital sander (which you really don't need).
Most Dremel carving projects are very budget friendly past the initial cost of the Dremel, so having one is a great resource to make some meaningful gifts for others (as long as you have the patience). Check out the rest of the channel for more Dremel projects!
Like what I share and want to support the channel? Buy me a coffee at the link below:
ko-fi.com/logscarvingclub
Thank you for watching!
Amazon affiliate links for the tools and accessories I use below:
Amazon Prime 30-Day Free Trial:
amzn.to/3MyKYPe
My Tools:
My DeWalt Orbital Sander: amzn.to/3PJHN7A
My Dremel Flex Shaft: amzn.to/3ehsAJG
My Dremel 4300: amzn.to/3DOBhFJ
My Dremel Lite: amzn.to/3J4b61P
My Dremel 8220: amzn.to/3pj32Ch
Oils/Finishes I use:
Watco Teak Oil amzn.to/3MsBxAw
Gallon mineral oil amzn.to/3l1zqtO
12oz mineral oil amzn.to/3YAfAnp
Beeswax and mineral oil amzn.to/3sBv2Dv
My most used bits and burrs:
SHAPING:
Dremel 561 amzn.to/3dOQpIw
Dremel 562 amzn.to/3rVsSy9
Dremel 801 Shaping Wheel amzn.to/3mBGSwf
CARVING:
Kutzall Xtreme Flame Burr amzn.to/3yl8veT
Kutzall Original Taper Burr amzn.to/3m0TVnN
Tungsten Carbide Burrs amzn.to/3s4S4Ct
ENGRAVING:
Dremel 191 amzn.to/3DScmkG
Dremel 106 amzn.to/3F46sP3
Dremel 111 amzn.to/3m0zA1Q
SANDING:
Dremel 84922 amzn.to/3GFMvhw
Dremel 407 amzn.to/3pPbp7V
Dremel EZ402 amzn.to/3yhJote
Polishing Wheels amzn.to/3oNDxsP
Dremel Sanding Disks amzn.to/31UsoNR
“We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites at no extra cost to you.” "As an Amazon Associate I earn from qualifying purchases."
Kutzall Affiliate Link:
5% off Kutzall products with promo code: DREMELTIME (in uppercase) kutzall.com/collections/flame...
Wear a mask, eye protection, and hearing protection, and consult your tools' manuals prior to using them to ensure safety. This video is for my insta @logscarvingclub.
If you're looking for more wood carving designs and videos, I recommend watching the video where I carve a greek paddle with a Dremel 4300. I use Walnut, Poplar, and Epoxy! The epoxy was a hassle but came out really cool.

Пікірлер: 45

@chaz4471 2 ай бұрын

Beautiful work!!!!!

@LogsCarvingClub 2 ай бұрын

Thank you! I really enjoyed this project.

@user-lz7rr3nu1v 5 ай бұрын

This may be a little late but you’re the goat log I hope that school is working out for you and yup thanks

@LogsCarvingClub 5 ай бұрын

Thank you so much! It’s been great just busy. Hoping to get out some more videos soon. Also hope you’re doing well

@tracybowling1156 Жыл бұрын

Another excellent idea. I'm sure it was a big hit at home. I love how you showed how you fixed some things that didn't originally work. Use these processes at school when you run into a difficult class or assignment. You are so talented! You're only going to get better! 😊

@LogsCarvingClub Жыл бұрын

Thank you Tracy! It was a fun project working around the little mistakes and learning as I went. Looking forward to more projects soon!

@iamyou3080 4 ай бұрын

I just found your channel and am obsessed. Waiting for my dremel in the mail and your videos are informative and entertaining. I hope you make more vids soon!!

@LogsCarvingClub 4 ай бұрын

Thank you so much! I plan to soon!

@AG8000 Ай бұрын

Nice 👍

@ETA555 2 ай бұрын

It looks nice

@LogsCarvingClub 2 ай бұрын

Thank you! I like how this one turned out.

@kylerudman3266 Жыл бұрын

Jokes were landing this episode!

@LogsCarvingClub Жыл бұрын

Thank you Mr. Rudman, I try my best

@bensonbird9929 11 ай бұрын

I love the writing "Here is a clip of it to increase my audience retention"

@LogsCarvingClub 11 ай бұрын

Hope it works!

@tregaricus00 4 күн бұрын

subscribed ❤

@LogsCarvingClub 2 күн бұрын

Thank you so much!

@natm7856 Жыл бұрын

So creative to have a magnet on the inside to catch the bottle caps! I also really like the felt, makes it look classy 😎

@LogsCarvingClub Жыл бұрын

Thank you Natalie! I like the felt too, hides all the fuss at the back

@Dave_N8CR Жыл бұрын

This is awesome! Enjoy that you’re just using a Dremel for all your work. Sanding is extremely boring, but using an orbital sander is fine. Looking forward to your next project.

@LogsCarvingClub Жыл бұрын

Thank you Dave! It presents a good challenge, and keeps the budget and space needed pretty low. Thanks for being here!

@patriciawaterman9764 Жыл бұрын

Great job! Thanks for sharing 😎

@LogsCarvingClub Жыл бұрын

Thank you Patricia! Thanks for commenting

@tjblancato Жыл бұрын

Biggest Log fanboy✋

@LogsCarvingClub Жыл бұрын

Let’s go!!!

@MakersWorld20 29 күн бұрын

You could make another bottle opener, instead of wood you could use a mix of your bottle caps and epoxy and create a block/ base from that?

@gemaqueartes...1639 5 ай бұрын

Muito bom! 👏👏👏👏👏

@LogsCarvingClub 5 ай бұрын

Obrigado!

@lingcod91 3 ай бұрын

Old hard drives contain Neo___ magnets. They are attached to a hunk of metal with mounting holes. These are scary strong and difficult to remove them from flat surfaces. DON'T TRY to LIFT . . . rather SLIDE them off. DANGEROUS if CARELESSLY HANDLED. Neos are less affected by shock or heat, like regular magnets are.

@Wayneawebb Жыл бұрын

I'd use the bottle caps in an epoxy serving tray.

@LogsCarvingClub Жыл бұрын

That's a great idea! I think I have a couple hundred so I can probably do multiple projects

@nephiilim 6 ай бұрын

Great videos man. Do you by any chance have any suggestions about doing dremel stuff in an apartment? I've come across a few things but it'd be cool to see what you think. That's saw dust gets on everything pretty fast.

@LogsCarvingClub 6 ай бұрын

Unfortunately when I’m in apartments I only use mine for very small projects like engravings because it’s so loud I don’t want to bother roommates or neighbors and it’s so messy I have to keep it outside since I would otherwise need a dust collection system

@shadi3993 Жыл бұрын

yet another great execution i ordered a mini drill ( chinese dremel from a company called hilda) because i didnt want to invest huge amount and i will hopefully get it tommorow and to say i am excited is an understatmet thanks for giving me the push to purchase it , i have a request if if you think you can help me with i would love to make a comb or a brush as it would make a great gift for someone like my grandma can you post a video on it ?

@LogsCarvingClub Жыл бұрын

That’s great to hear - I hope you enjoy it! I actually have made a comb before on my instagram, I may make a video on one if I can find the time. Too many projects on my list to cover them all

@dilavardanish6282 Ай бұрын

Which Dremel do you think best for carving wood like you do for long periods of time? I’ve pretty much bought all the bits in your bio plus a Kutzall for a MakerX rotary tool. After using it for a bit I realized it wasn’t doing good. I recently realized I have an outlet in my new back yard so decided to look into some good corded rotary tools.

@Agent.313 Жыл бұрын

Mainly got dremel cuz of you bro, i need help on how to cut. I have a question: If you could please answer. The dremel spin clockwise, so when I cut from left to right in the direction of the wheel cutting spin, my dremel jumps forward. I was wondering if you could tell me what I am doing wrong and how to avoid making dremel jumping forward away while cutting with a cutting disc. When i cut from right to left direction, the opposite direction of the disc spin, it doesn't jump.

@danielsolheim3296 Жыл бұрын

Do you feel any power difference between the Dremel 4000 and 4300?

@LogsCarvingClub Жыл бұрын

I haven't done a direct side-by-side, and I don't have a 4000 anymore, but I didn't feel much difference at all. I try not to stress the tools regardless though to make them last