Bottle Opener with Magnetic Cap Catcher 🧲 Woodworking Gift Ideas

Рет қаралды 21,073

3 жыл бұрын

Learn to make this wall-mounted bottle opener with a magnetic cap catcher. It's a great beginner woodworking project and makes for an excellent gift as well!
If you enjoyed the video, be sure to Like & Subscribe!
#woodworking #diy #bottleopener
---
As an Amazon Associate I earn from qualifying purchases.
TOOLS //
- Table Saw: Delta 36-725
- Planer: amzn.to/316H0Xo
- CNC: www.inventables.com/technolog...
- Heat Gun: amzn.to/3cprz0s
HARDWARE & ACCESSORIES //
- Magnets: amzn.to/32WNsRy
- Bottle Opener: amzn.to/3cAkomt
- Bottle Opener (probably a better option): amzn.to/3pFnCL6
- Total Boat Epoxy Resin Kit: amzn.to/3hQwjNO
- Epoxy Color Pigment: amzn.to/32Vfux9
- Shellac: amzn.to/32T0XSw
- GRR-RIPPER Pushblock: amzn.to/3iX9IR6
MY FILMING GEAR //
- Camera (Cannon M50 Mirrorless): amzn.to/2FZ1klB
- Microphone for Voiceovers: amzn.to/2FYYTPY
- Tripod: amzn.to/2QCdzpR
- Rode Microphone: amzn.to/39s6vVr
FOLLOW //
- Instagram: / casualbuilds
- Facebook: / casualbuilds
- Twitch: / casualbuilds
- Website: www.casualbuilds.com
---
This DIY wall-mounted bottle opener with a magnetic cap catcher is an excellent beginner woodworking project. You can make one for yourself and they also make for great gifts as well. In the video, I show you my approach for making it, but these can be made a variety of different ways based on the tools that you own. It's as simple as getting a piece of wood, adding in a magnet on the back, and securing the bottle opener to the front.

Пікірлер: 57

@CasualBuilds 3 жыл бұрын

What'd you think of the ending scene? I had a good laugh while editing 😂

@ovidiuciurdarean847 10 ай бұрын

Great video,the ending scene it’s very funny.

@peterg8752 2 жыл бұрын

I make this project in a cutting board style and also use 2 magnets. Every woodworker has a scrap pile of mistakes, thanks for sharing yours. Really enjoyed the ending.

@larrystone5749 Жыл бұрын

Good job

@KeithEtheredge87 2 жыл бұрын

Great video! If you want to save some time and effort on the epoxy fill and sanding, try a card scraper on the cured epoxy. The thing is MAGIC and saves a buttload of sandpaper.

@LincolnReisPilot 3 жыл бұрын

Beautiful piece of art! Instead of one hole in the center, I would make 2 holes on the back, one on each side to hang in the wall, it wouldn’t be on the way of the bottle opener screws and would make the piece tight in the wall. Great work!!

@CasualBuilds 3 жыл бұрын

Thanks! I'll definitely do that on the next one.

@fossfix Жыл бұрын

Very funny, loved it and learned a bit at the same time, THANKS

@yourunclesam6780 Жыл бұрын

fantastic proyect.Thanks

@kraiggreenly5194 3 жыл бұрын

Good project and video. Thank you.

@GeorgesonOfficial Жыл бұрын

Lmao that looked exactly like how it looks to become drunk in Sea of Thieves

@ThomasCustomWoodworks 3 жыл бұрын

Awesome video and very impressive editing. I didn’t even think to use the Velcro to mount it to the wall. Great idea. Did you just stack 2 magnets in the one hole? I may have to do that also!

@CasualBuilds 3 жыл бұрын

Thanks Thomas! Yeah, I tested with just 1 and it was ok, but I stacked 2 and it was definitely stronger.

@ThomasCustomWoodworks 3 жыл бұрын

Casual Builds Thank you!

@brittanytognacci1477 3 жыл бұрын

LOL - the ending

@sajithmusic 2 жыл бұрын

nicely done..

@smeg8557 2 ай бұрын

Can you tell me which magnets? I clicked the link but there are different options, 10P-20P assuming this means pounds, not sure which to get

@Bekim8310 3 жыл бұрын

Great video! Never throw those scraps away. You can always make something cool with them!

@CasualBuilds 3 жыл бұрын

Thanks! Yea, that scrap piece worked out perfectly for this project, just the right size to cut the plug.

@gladiator9898 2 жыл бұрын

Pppp

@gladiator9898 2 жыл бұрын

Ppppp

@gladiator9898 2 жыл бұрын

Please let

@gladiator9898 2 жыл бұрын

@thedrizz1913 3 жыл бұрын

Next level edits!! Great vid and thanks for showing us the tips. I have a few cheapo openers that require me to tilt the bottle way up. Not good.

@CasualBuilds 3 жыл бұрын

Thanks Adrian! Yea, I need to tilt the bottle a full 90 degrees for it to grab the cap. Poor design haha

@vk2let 2 жыл бұрын

Great video and I loved the ending.

@CasualBuilds 2 жыл бұрын

Thanks!

@jerrydempsey5428 2 жыл бұрын

Your page is aptly named. I like your casual approach to these fun projects. I would be curious to know if any of the bottle caps didn't adhere to the magnets or after repeated testing, did you really care? lol

@CasualBuilds 2 жыл бұрын

Haha thanks! Casual projects are my specialty. I have another one of these in my kitchen in my house with like 20 caps still stuck to it. It's holding up pretty good after a few years.

@edwooodfork 3 жыл бұрын

Cool video, great music

@CasualBuilds 3 жыл бұрын

Thanks!

@pacitastyle2358 2 жыл бұрын

hola , yo tengo que colocar los imanes mucho mas arriba,por que aveces no agarra las tapas al caer..tienen alguna medida especial los imanes?.. saludos desde chile

@danijelpintaric2635 3 жыл бұрын

Hi, nice work. I’ve started woodworking fairly recently as a hobby and really like what you can do with a CNC. Which brand are you using and what would you recommend for a beginner. Do you know any sites where I could find comparisons? Thanks!

@CasualBuilds 3 жыл бұрын

Hi there, I have the X-Carve from Inventables and I haven't really looked at others so I wouldn't be able to give another recommendation. I love my CNC and it's super easy to use.

@danijelpintaric2635 3 жыл бұрын

Thanks for quick response

@JustinNeaves 3 жыл бұрын

As always, great video! One question - What bit size are you using on the CNC for that toolpath?

@CasualBuilds 3 жыл бұрын

Thank you! I ended up using the Solid Carbide Fish Tail Downcut Spiral Bit - 1/16" (from Inventables).

@JustinNeaves 3 жыл бұрын

@@CasualBuilds Perfect, thanks man!

@CasualBuilds 3 жыл бұрын

@@JustinNeaves Anytime!

@victorburgos4224 Жыл бұрын

The two magnets in the same location?

@CasualBuilds 6 ай бұрын

yeah, made it stronger

@jasonconley3647 3 жыл бұрын

Great video and great piece. 2 questions: what was the dimensions and what wax did you use?

@CasualBuilds 3 жыл бұрын

I want to say it was roughly 6" wide and 12-15" long. The wax is standard woodworking paste wax.

@jasonconley3647 3 жыл бұрын

@@CasualBuilds thank you so much!

@Sfyre 3 жыл бұрын

Why did you dye the epoxy that you used for the walnut plug?

@CasualBuilds 3 жыл бұрын

Great question - I thought the color would be more visible since the plug wasn't a snug fit. Turns out, you could barely see the color after it was dry.

@bobphifer8811 2 жыл бұрын

What size were the magnets and where did you order them ? Thanks, Bob in Tampa

@CasualBuilds 2 жыл бұрын

I have links to the magnets that I purchased in the video description.

@cherylpenrod8768 3 жыл бұрын

What were the dimensions of your project?

@CasualBuilds 3 жыл бұрын

I honestly can't remember. I think it was roughly 4" wide and about 12"-15" long or so?

@hollybranch1199 3 жыл бұрын

LOL now I want to know if the bottle opener I bought is going to cause a problem!

@CasualBuilds 3 жыл бұрын

Haha I've gotten a few from Amazon that were much better than the one I used in the video.

@rudylopez163 3 жыл бұрын

@@CasualBuilds which ones would you recommend? I think I bought the same as yours if those came in a 12pck

@braydenjaime8149 3 жыл бұрын

@@CasualBuilds would like to know what Rudy asked as well

@CasualBuilds 3 жыл бұрын

@@braydenjaime8149 - threw a link in the description. the rusty/cast iron ones are the ones that i had issues with. the stainless steel looking ones are better in my opinion

@braydenjaime8149 3 жыл бұрын

@@CasualBuilds thank you!