How To Build a Longboard, Gluing, and Layup.

Рет қаралды 40,057

12 жыл бұрын

Longboard Technology here to walk you through the process of building your first longboard.
In this video we will be talking about The Layup!
We go over the process of gluing, which glue to use, and cover a number of tricks to make the process fast and easy, so you can quickly get your assembly into your press.
Watch the entire Longboard Building playlist here:
• Longboard Building How...
Follow us on facebook at: / longboardtechnology
Check out our playlists, and watch only the subjects you are interested in:
/ @longboardtechnology

Пікірлер: 37

@retbre1 11 жыл бұрын

this worked really well for me thx so much I used 5 plys thou and titebond 3

@jonask.9957 7 жыл бұрын

After seeing all the comments, I did google Woody Hyezmar's site and grabbed his book. I'm now happy to find myself working on some new exciting proyects this month :)

@LongboardTechnology 12 жыл бұрын

@blackpandaskate It depends a lot on the press, and how its cut out. Not to mention the weight of the rider. But they do tend to not be terribly flexy with this layup.

@BlacktoryProject 12 жыл бұрын

Nice tutorial man. One question though: would this layout be strong enough for drop through cutouts? Provided you keep enough wood at the ends, ofcourse.

@LongboardTechnology 12 жыл бұрын

We have another whole video JUST on the wood. Just search 'Longboard Building Walkthrough Wood' I'm using 1/8" baltic birch.

@bossmanboss15 12 жыл бұрын

pretty sick what kind of wood u using again

@liambekaert84 10 жыл бұрын

for a flex 2, do i only need to use 1 lengthwise grain layer at the bottom or use them both as in the video? thanks

@guyguyokgirjgirjgir 12 жыл бұрын

In one of his other videos he said he used baltic birch wood, and a quater inch.

@LongboardTechnology 11 жыл бұрын

For decorative veneers, Yes. If its high quality stuff. For structural components, no.

@jackkerwin5196 12 жыл бұрын

i love ur videos ansd sorry if im asking too many questions but what would using fiberglass do and if i was too do it would i out the graphic on before the fiberglass or after...thanks\

@Durka091 12 жыл бұрын

Should i include at least one cross grain cut among the other vertical planks? Or can it all just be vertical cuts?

@jerkrant 11 жыл бұрын

Hey, I live in Italy I was just wondering how thick the ply's are or if the measurements should be fairly standard throughout the world for Baltic Birch

@iamevanwilliams 11 жыл бұрын

so i've been getting into board making and i'm currently stocking up for my fourth board. i want to give it 9 plys and micro drop but i'm not sure if just wood would hold up for the micro drop. what would you suggest?

@MegaSoccerkid17 12 жыл бұрын

would you recommend fiber glassing the board?

@blackpandaskate 12 жыл бұрын

will this board have a lot of flex

@LongboardTechnology 12 жыл бұрын

Fiberglass makes the flex a little more quick and poppy, and makes it SLIGHTLY stronger. Its expensive, messy, and totally unnecessary. Don't even mess with it unless you need to.

@aSuicidalCrab 12 жыл бұрын

hey do you have to let the glue set before you press it? thanks

@dakotaMUNSTER 12 жыл бұрын

Do u steam the plys before glueing and pressing ?

@santiag49 11 жыл бұрын

im going to do a freestyle deck for hard work, u recommend me to use fiberglass? and where? in the middle of all the ply?, sorry for bad english im from argentina, im going to use a wood, here is called "guatambu" .

@spencerhealy877 10 жыл бұрын

Where do u get your wood and is it 1/8 inch

@Lxo96 12 жыл бұрын

why did you put the mixed glue in to the bottle with base? dosent that destroy it?

@LongboardTechnology 12 жыл бұрын

No, Fiberglassing is an expensive pain in the rear. It can allow you to do some pretty cool things, but what most people want to make can be done entirely with wood.

@nineball87 12 жыл бұрын

he is using baltic birch

@LongboardBail 11 жыл бұрын

Would contact cement work?

@AltitudeReality 12 жыл бұрын

What are the dimensions of the wood?

@carlosmestre6125 11 жыл бұрын

what is the inch of the plys?

@yourtruck 9 жыл бұрын

You might consider music during the ffwd portions... Just sayin'

@bullockchristian60 11 жыл бұрын

was that 4 plies

@TopNotchLacrosseest2013 8 жыл бұрын

What's the glue you use

@thorshammer10129 8 жыл бұрын

+Top Notch Lacrosse watch the start to find out...

@santip007 12 жыл бұрын

Guy one question, may sound stupid but I use centimeters so I don't understand a shit... This board would have a half inch thickness more or less?adding the 4 planches? And how would it flex be? Thanks