The 1972 Plymouth Satellite Rat Rod Gets Paint.

Рет қаралды 14,164

4 жыл бұрын

After looking into just how bad the car really is, I realized the only solid body panel was the roof. With the cost to make it clean, I would be into the car at least twice its value. I took this opportunity to not only build my first rat rod, but to check something off my bucket list. The car is moving right along, as it gets a new gnarly paint job.
FIND MERCHANDISE HERE:
-- blacktopyc.com/product-catego...
INTERESTED IN SUPPORTING THE CHANNEL?
Don't forget to SUBSCRIBE,
Check out the membership for additional content.
-- Membership: / @lunaroutlawsgarage
TO FOLLOW AND TO SEE WHAT'S UP HEAD HERE:
-- Facebook Page: / lunaroutlawsgarage
-- FaceBook Group: / 989120924790314
-- Instagram: / lunaroutlaw
-- email: LunarOutlaw@gmail.com
Mailing address:
LunarOutlaw's Garage
P.O. Box 7
Averill Park NY, 12018
-- Paypal: www.paypal.com/cgi-bin/webscr...
#Hemmings #projectcar
A very special thank you to those who have contributed to the channel
Nigel Stringfellow, Michael Vacca, joe schmo

Пікірлер: 444

@slim56 4 жыл бұрын

I’ll reserve judgement till it’s done. Right now I’m leaning towards it looks like crap. Sorry I gotta tell the truth

@kongsgarage7157 4 жыл бұрын

it looks fkn awful

@johnziegelbauer4999 3 жыл бұрын

Parts car ???

@frankbuscio741 3 жыл бұрын

Looks like shit

@minisareus 4 жыл бұрын

Put chrome grill back on will look cool watch COLD WAR MOTORS how to fix chrome on the 60 fury

@montyholland3357 4 жыл бұрын

I agree. A chrome bumper and grill surround sure bring the sexy of these era cars that todays blah sedate stylings definitely lack.

@Barncaster1 3 жыл бұрын

I look at it this way Bri, you have saved this car from the recycling heap. It has been stabilized, given a second life and will be a fun driver. Over the years, it will appreciate to the point where throwing another 10k at for a modest resto will be a no brainer. Start scrounging parts now as they only get more expensive. It’s all a journey, enjoy it! Well done.

@bradeastham5494 4 жыл бұрын

I think it awesome! Being brave enough to express yourself in you car building is what it’s all about! Can’t wait to see it finished!

@jayo3202 4 жыл бұрын

Hey Brian, coming over from Randy at Auto auction rebuilds. Subscribed and looking forward to your videos

@LunarOutlawsGarage 4 жыл бұрын

Thanks Jay O I hope you enjoy the projects man

@montyholland3357 4 жыл бұрын

Welcome to the channel. I'm sure you will enjoy it

@mikebrown8065 4 жыл бұрын

Jay O, welcome!! I joined Brian on his channel a while ago and I watched just about every video he made. I hope you will enjoy it as much as I do! It's funny too, because it was because of a post Randy made, that lead me to here! Randy was my first subscription on u-tube!!

@LunarOutlawsGarage 4 жыл бұрын

Thanks mike🤘

@jayo3202 4 жыл бұрын

Hey Mike! Yeah, I enjoy it a lot so far. Looking forward to the Cadillac restoration also. Don’t screw it up Brian! Haha just kidding. I am sure whatever you do it will be epic

@rogerw9840 4 жыл бұрын

"I promise, officer. There are no dead hookers in the trunk." Anyway, it looks brutal. :)

@LunarOutlawsGarage 4 жыл бұрын

🤣🤣🤣 thanks man

@Rollormotor 4 жыл бұрын

I am surprised you didnt finish welding your Flintstone mobile before moving on to the paint. You did a great job making it look like a High school project. It will be interesting to see how your bumper fits now that you reworked the upper valance. you should have kept it a secret that you were PPG certified.

@LunarOutlawsGarage 4 жыл бұрын

lol why are you a DuPont guy?😁 I don’t hold the certification anymore it has been 9 years

@BigfootsnMopars 4 жыл бұрын

Looks like your having fun and enjoying your car. That’s all that Matters. Gonna be cool hearing it make noise and go down the road.

@LunarOutlawsGarage 4 жыл бұрын

I can’t wait till we break in the rear tires

@clevelandmaker386 3 жыл бұрын

@@LunarOutlawsGarage why don't you build a 360 for Randy's car?

@LunarOutlawsGarage 3 жыл бұрын

The 360 crank would need to be heavily modified if we have a hard time putting a newer727, and have to use the current transmission.

@clevelandmaker386 3 жыл бұрын

@@LunarOutlawsGarage will you still be able to keep the push button trans?

@DodgyBrothersEngineering 4 жыл бұрын

I like it. Don't know why, but you achieved the look you were go for. Well done Bryan.

@LunarOutlawsGarage 4 жыл бұрын

Thanks man. 🤘

@DodgyBrothersEngineering 4 жыл бұрын

@@LunarOutlawsGarage Rat rods are not really my thing, but I think you captured it nicely.

@LunarOutlawsGarage 4 жыл бұрын

Thanks man that is a great complement. I could never bring myself to make a perfectly good car into one but this car was so far gone that I couldn’t really justify a full restoration on it. Sometimes you just gotta go with the flow lol

@DodgyBrothersEngineering 4 жыл бұрын

@@LunarOutlawsGarage yep when in Rome...

@juanpalos3657 4 жыл бұрын

Got sent to your channel from AAR... Cant wait for the coronet project plus your ratrod project is awsome. Keep up the great work bud big shout out to you from México.

@montyholland3357 4 жыл бұрын

Welcome to the channel and I'm sure you will enjoy it as much as I do

@Tillbilly 3 жыл бұрын

man she is looking better and better every video keep em coming cant wait to see the 318 build

@qrm8772 4 жыл бұрын

Brian, I'm hlad you have been able to get this car closer to completion. I feel bad since I was one of the ones that encouraged you to fix it. It has turned into a tremendous time and money pit. But you have perservered and learned which is priceless.

@LunarOutlawsGarage 4 жыл бұрын

I will be sick when it is done and I can step back and say I did that. 🤘 and it is never a waste if you learn something, not to mention great practice for the Buick GS build.

@thevinylcollector3472 4 жыл бұрын

great paint job looks awesome as a rat rod

@LunarOutlawsGarage 4 жыл бұрын

Thanks man

@icerazar713 4 жыл бұрын

Really hoping I get to see this running around when its done. 👍

@mikebrown8065 4 жыл бұрын

Brian that is AWESOME!!! I have rattle canned a lot of 🚗 in my day!! Lol but seriously one of the best jobs I did was on my buddies 1972 Chevelle. I used only rustoleum, primers and paint, cleaned out 3 Homedepots for the "sunburst yellow" and gloss black for the SS stripes!! Not one person could believe that it was a rattle job!!! Also FREAKING AWESOME to hear you're teaming up with Randy from Auto Auction Rebuilds on the Coronet!! I hope you can keep the 326 and the Trans from his car and do 2 videos; rebuilding the 326 and rebuilding the old cast iron Trans!! Rebuilding stuff like that is a dying art, and it is sooo hard to find anyone to pass the knowledge on!! Looking forward to the next video!! Thanks again for the great videos!!!

@LunarOutlawsGarage 4 жыл бұрын

I would be willing to do the rebuild on them at some point. I have a growing list of engine builds lol

@AutoAuctionRebuilds 4 жыл бұрын

The main issue restoring cars that aren't "hot cars" is you could buy one finished for 1/2 what you'd spend building one yourself.

@LunarOutlawsGarage 4 жыл бұрын

Lol that is very very true.

@dginia 3 жыл бұрын

During the summer months the character of rain is spotty showers, that is to say, localized. You just have to expect the your spot will often be the location and cover accordingly.

@jimmyjoseph51 4 жыл бұрын

Hi Brian.... just came over from Randy at AAR and have subscribed to your channel. Really looking forward to watching your videos and building that 318 for Randy's '59 Dodge.

@LunarOutlawsGarage 4 жыл бұрын

Thanks man I hope you enjoy the adventure

@montyholland3357 4 жыл бұрын

Welcome to the channel and I'm sure you will enjoy it as much as I do

@DanPevensey1 3 жыл бұрын

Hi Lunar I'm glad you decided to help Rand you sounds like the 2 of you will have an awesome time fixing that car oh and by the way I'm now part of your channel

@LunarOutlawsGarage 3 жыл бұрын

Thanks for checking out my channel man. I think it will be a fun project, and it will be awesome to meet Randy

@racerboy2212 3 жыл бұрын

“Side marker lights” were mandated for manufacturers back in ‘68 when the cars were first built. What you (the end user) do with them afterwards is totally up to you. If you want them gone, then get rid of them.

@thebelfyify 4 жыл бұрын

Here from AAR’s channel and looking forward to your build.

@LunarOutlawsGarage 4 жыл бұрын

🤘thanks for checking the channel out. I am looking forward to this project

@montyholland3357 4 жыл бұрын

Welcome to the channel and I'm sure you will enjoy it as much as I do

@grinnbearrit6419 4 жыл бұрын

The 72 Satellite was my first car and I can't wait to get another one in the future. I'm a huge Mopar guy and I'm looking to get a 58 Dodge Royal and fix it up and then hopefully get myself a Satellite or a Road Runner... heck maybe a GTX. Love your videos and can't wait to see more content. Keep up the amazing work.

@LunarOutlawsGarage 4 жыл бұрын

Thanks man🤘 I know I would really like to get my hands on a 71 barracuda.

@briancaverly1826 3 жыл бұрын

Bryan I wasn't a fan of your half-assery on this project at first, but I think it looks great after paint, you made all the right decisions.

@montyholland3357 4 жыл бұрын

So I seriously hope that you save the bright work. If you don't replace the body trim, May I recommend pinstriping or airbrush the former areas of the body line bright work. It brings out the sexy of these bodies.

@suzipicosecond3386 4 жыл бұрын

I love what you've done to the Rat Rod. May the Lord Bless you too...and your family.

@LunarOutlawsGarage 4 жыл бұрын

Thanks man and god bless you as well

@unclebandice5205 3 жыл бұрын

the red kind of looks like subtle flames, looks sick lunar!

@stevesymons7196 4 жыл бұрын

Came over from Randy's channel to subscribe... but realised when I got here, I already was subscribed!!! Me thinks me needs more coffee!

@LunarOutlawsGarage 4 жыл бұрын

Lol I always need more coffee

@mexicanspec 4 жыл бұрын

Why did you mask the rear side markers when it is so easy to remove them?

@LunarOutlawsGarage 4 жыл бұрын

B/c I started to pull the Front driver side one off and it disintegrated

@mexicanspec 4 жыл бұрын

@@LunarOutlawsGarage They are available really cheap. I sell them but it is taking three months to get them from Mexico to the US.

@markbrenneman5219 3 жыл бұрын

I like the down and dirty rattle can "fogged" red paint effect. Gave me a little inspiration. My approach might be more of medium/dark blue matte applied in the same manner and areas as your red. My blue accents would be over a medium grey primary body color. Just wanted to say, I liked the creative twist to the "textbook" rat rod recipe. Thanks for posting.

@timothyballinger6280 4 жыл бұрын

I've been watching since the first video of the Buick and I really enjoy the videos. I'm now a fan of the satellite. I'm impressed with how far its come, from basically junk to a really cool car. Keep them coming. I'm hooked 👍

@LunarOutlawsGarage 4 жыл бұрын

Thanks man that’s an awesome compliment I really appreciate it🤙

@davidpacheco6563 4 жыл бұрын

Keep up the hard work... can't wait for the next video ☺️

@LunarOutlawsGarage 4 жыл бұрын

Thanks David

@karlmoltzan6196 4 жыл бұрын

Brian I like what you are doing with the Plymouth. As for grpetting the tail light buckets off. You press in on the scocket of with the buld. You turn them and they will come out with the buld and wires intact. Just a FYI. All the old cars were like that.

@aliozdil6586 3 жыл бұрын

Hi Brian I’ve subscribed after watching Randys video, looking forward for future videos 👍

@John-wy1iz 4 жыл бұрын

I like the look! I think you should do like you said and add some flames lightly down the sides!! I am glad you didn't block out the side markers, to me just makes fenders look to long, it kinda breaks it up a bit. You keep working and I'll keep watching! I'm almost done with my 57 fairlane!! Will be looking for my next project in a little while. I'm thinking a beater gasser!!!

@LunarOutlawsGarage 4 жыл бұрын

A solid axle Gasser would be bad ass

@sjaywjayw70 4 жыл бұрын

The all black was pretty nice.

@erneststanley4854 4 жыл бұрын

Me personally,I just put the big Plymouth decal above the rear wheels. Either white or that red you painted the front with. I've always dug how that looks. Keep up the good work. You're really inspiring me to get my hands dirty again. If you can do it in your driveway,so can I.

@LunarOutlawsGarage 4 жыл бұрын

That is the spirit man🤘It’s only impossible if you tell yourself that it is. 🤙have fun man

@trillrifaxegrindor4411 3 жыл бұрын

it will also look like smashed assholes unless you do it right.not fast,not cheap,not mickey moused but right ........trust me when i say,this car could look incredible but it doesn't the way it is now.

@GreaseRookie 4 жыл бұрын

BADASS. Looks great man. Can’t wait to see vids of it cruising. 🤙

@LunarOutlawsGarage 4 жыл бұрын

Can’t wait for that

@derekrichardson762 4 жыл бұрын

Hey Luner Derek here from auto auction rebuilds Randy sent me... Excited about the joint venture on the 59 Cornet...I subbed

@LunarOutlawsGarage 4 жыл бұрын

Thanks for checking the channel out man. I am looking for to this build. It is a mean car and it needs a mean engine

@derekrichardson762 4 жыл бұрын

@@LunarOutlawsGarage I agree Lunar. She's going to be a beast lol

@montyholland3357 4 жыл бұрын

Welcome to the channel and I'm sure you will enjoy it as much as I do

@rockforehead3022 3 жыл бұрын

fun stuff, top work!

@maryshasteen9897 4 жыл бұрын

Here from randy channel Aar thank u for helping him on his channel

@LunarOutlawsGarage 4 жыл бұрын

Thanks for checking out mine. I am happy to help randy. His channel inspired me to start mine a little over a year ago.

@montyholland3357 4 жыл бұрын

Welcome to the channel and I'm sure you will enjoy it as much as I do

@fluffy1346 4 жыл бұрын

Much support as always keep up the great work

@montyholland3357 4 жыл бұрын

I see you 👁️👁️👀

@PeaceNGrease 4 жыл бұрын

For the dented door try jamming a deflated basketball or soccer ball in the door & reinflate the ball slowly. Works like a charm.

@oldpolak5203 4 жыл бұрын

Or jam a two by four in there and bang it out from the inside .

@PeaceNGrease 4 жыл бұрын

andy kozlowski true. But the ball trick gives a nice smooth radius like the panel.

@LunarOutlawsGarage 4 жыл бұрын

Yes beating it with a 2 x 4 would be a little bit more aggressive lol 🤙

@johnwilburn 3 жыл бұрын

@@oldpolak5203 That trashes the panel by leaving stretch marks where the board edges were.

@oldpolak5203 3 жыл бұрын

@@johnwilburn Yes it does , but I had good results by angle grinding the end of 2 by 4 smooth. Any who way faster than welding nuts and then grinding them , never done that .Inflating a basket ball is a good idea but never even thought of that . I would think it would deform the inside panel .

@captaindew3106 4 жыл бұрын

That Bondo sucking cup need the be wet or they may be bad to use but the best dent puller is always a slide hammer either drill em in or weld a rivet to em and use body filler to finish I been using a drill in slide hammer cause they can give your arm more strength power.

@petermontagnon4440 4 жыл бұрын

The right side looks really good!!! You have to do the hood again!!!! LOL

@LunarOutlawsGarage 4 жыл бұрын

Lol I am deciding if I wanna redo the mat red with gloss red

@nlproductions5030 3 жыл бұрын

Honestly I dig it , it looks freaking sweet

@jimmyford271 4 жыл бұрын

Use an old style bottle/can opener aka church key to remove that drip rail moldings. I like the round 68 side markers myself. It’s strangely attractive lol.

@LunarOutlawsGarage 4 жыл бұрын

I will check out the 68 side markers. It’s a rat rod so anything goes 🤘

@moparnut6286 4 жыл бұрын

Great idea on the drip rail molding thank you.

@nigelstringfellow5187 4 жыл бұрын

It looks fabulous man well done

@LunarOutlawsGarage 4 жыл бұрын

Thank you my friend

@timothygreen9885 3 жыл бұрын

One of the cars I had as a teen was one of these. Just about the exact same. Mine has a tan leather interior with console and high back bucket seats. Loved that car stupid me sold it for $1500 back in 83.

@LunarOutlawsGarage 3 жыл бұрын

That sucks but it sounds like it was a fun ride man. 🤘

@oneeyedcat3072 4 жыл бұрын

It's coming along,there buddy. Keep on diggin'

@montyholland3357 4 жыл бұрын

Don how are you doing. I see you 👁️👁️

@oneeyedcat3072 4 жыл бұрын

@@montyholland3357 Doing good. Great actually.

@montyholland3357 4 жыл бұрын

@@oneeyedcat3072 glad to hear it. I see you 👀👁️👁️ by the way LOL

@a93vett 4 жыл бұрын

good job looks great. glad your helping Randy on his 318 sounds like a cool project.

@LunarOutlawsGarage 4 жыл бұрын

Thanks man. I think it will be a fun project . 🤘

@montyholland3357 4 жыл бұрын

Welcome to the channel and I'm sure you will enjoy it as much as I do

@blevins6584mopar 4 жыл бұрын

Love the mopar content ! Excited about the engine build for auto auction rebuilds !

@LunarOutlawsGarage 3 жыл бұрын

Me too man it will be a fun build.

@edbivens8925 4 жыл бұрын

Randy said to check out your channel. Looking forward to it.

@1gatomon 4 жыл бұрын

Sometimes its actually easier to locate a better door and fender at a junkyard and swap them on instead of hours and hours of body work....

@millrays 4 жыл бұрын

Looking good.....hey by the way I sure hope you watched UTG paint vid .....lol lol lol lol

@prowirxenginestands2088 3 жыл бұрын

LOL...watch UT fuck up something else??? that ass clown is great for laughs...and people take him serious...a legend in his own mind

@jamespn 4 жыл бұрын

I like those Satellites, I remember seeing a B-3 ice blue Plymouth Satellite at Jim Riehl Chrysler Plymouth in Roseville MI in Fall of 1970. The new body style looked so sleek compared to the square B bodies from the sixties.

@LunarOutlawsGarage 4 жыл бұрын

I really like the Mopar fuselage design They are great looking.

@Jjay-tw1yy 4 жыл бұрын

i’m here thanks to randy! let’s go!

@LunarOutlawsGarage 4 жыл бұрын

🤘thanks man I hope you enjoy the adventure

@Jjay-tw1yy 4 жыл бұрын

LunarOutlaw’s Garage i most definitely will enjoy your channel

@montyholland3357 4 жыл бұрын

Welcome to the channel and I'm sure you will enjoy it as much as I do

@MoparMan-ff8fb 4 жыл бұрын

Anybody reading this do your self a big fat favor when puting on or replace brake lines fittings ect. On the threaded brake line bolt apply teflon tape and snugg down tight . After snugging the bolt run a little bit of gasket sealant from a tube around the back of the bolt where the line goes in . this does two things - keeps rust from welding the threaded nut to the brake line and the tape keeps the threaded bolt from rust welding to the main part like the master cylinder, proportioning block , wheel cylinder and the brass block on the rear end or rubber brake line fittings. I still say you need a skull with bat wings across the hood or the gargoyle with bat wings or even a skull with a lightening bolt going through it sideways . flat white paint for the hood skull layout like on the red car from 2nd mad max road warrior movie

@ADM-zu7xs 3 жыл бұрын

Coming over from Randy @ auto Auction Rebuilds, new subscriber. Can’t wait to see awesome content on your channel!

@Jupitermustangmike 4 жыл бұрын

Use hood pins to draw the hood down 👍🐎🐎🐎

@LunarOutlawsGarage 4 жыл бұрын

I’m waiting till the whole thing cures and then I’ll install the hood pins. It’s pretty awesome they have a factory spot for thim

@castaway6811 4 жыл бұрын

Hey buddy Randy sent me over from AAR Looking forward to the 318 build!

@LunarOutlawsGarage 4 жыл бұрын

Thanks for checking out the channel man. I am looking forward to that build.

@castaway6811 4 жыл бұрын

@@LunarOutlawsGarage Glad to find another channel with worth while content!

@LunarOutlawsGarage 4 жыл бұрын

I really appreciate that man 🤘it means alot

@montyholland3357 4 жыл бұрын

Welcome to the channel

@alanwilliamson9350 4 жыл бұрын

Looks like it came out of a mad max movie. Definitely different.

@raycheck6579 4 жыл бұрын

Going to be honest. The black looked better to me. Hope you invest in a cheap tunnel ram for the 318 to make up for it.

@LunarOutlawsGarage 4 жыл бұрын

I would be cool with that

@tracywraley6892 4 жыл бұрын

Looks cool I like the passenger side you got a lot of the dents out but it it cool

@LunarOutlawsGarage 4 жыл бұрын

Manufacture technique. They using a high build primer in the paint to hide smaller dents. They do it because during the assembly process the machines will put small dents in where they’re holding panels

@LunarOutlawsGarage 4 жыл бұрын

@brittballard4030 4 жыл бұрын

Have fun with it enjoy it I really like it

@montyholland3357 4 жыл бұрын

It's looking crazy 😱 that's good... Lol. GREAT job. Welcomed as many as I can while watching. Subs are jumping. Congrats

@ithwitt 4 жыл бұрын

Awsome man loved it

@LunarOutlawsGarage 4 жыл бұрын

Thanks man

@ithwitt 4 жыл бұрын

@@LunarOutlawsGarage ur videos always entertain me. U never have fallied

@LunarOutlawsGarage 4 жыл бұрын

Thanks man

@musclecarmitch908 4 жыл бұрын

Cool, looks wicked for a rat rod, going to be even wickeder with the bumpers!

@LunarOutlawsGarage 4 жыл бұрын

Thanks man I Appreciate it

@DXFXmc 4 жыл бұрын

Love it!!🤗🤗

@LunarOutlawsGarage 4 жыл бұрын

🤘thanks man

@glennthomas7435 4 жыл бұрын

Just watched Randy's vid on his Dodge/engine replacement by you --- Looks like it will be an interesting collaboration. Will be watching.

@LunarOutlawsGarage 4 жыл бұрын

Thanks for checking out the channel. I hope you enjoy this build with randy

@montyholland3357 4 жыл бұрын

Welcome to the channel and I'm sure you will enjoy it as much as I do

@jaycoopz2152 4 жыл бұрын

Does the drinker side open now?

@LunarOutlawsGarage 4 жыл бұрын

🤣 I need to replace two broken clips and then I’ll be all set

@jaycoopz2152 4 жыл бұрын

@@LunarOutlawsGarage you paint a small or extremely large rebel symbol somewhere...

@jaycoopz2152 4 жыл бұрын

@@LunarOutlawsGarage name the GS Hakathriel

@davidkolbo5747 3 жыл бұрын

Looks good

@kingerikthegreatest.ofall.7860 4 жыл бұрын

Looks cool.

@LunarOutlawsGarage 4 жыл бұрын

Thanks man

@santoscardona1 4 жыл бұрын

Just came over from Randy’s channel. Looking forward to seeing your videos.

@LunarOutlawsGarage 4 жыл бұрын

Thanks man I hope you enjoy the projects

@montyholland3357 4 жыл бұрын

Welcome to the channel I hope you enjoy it as much as I do

@jonbennett118 4 жыл бұрын

love your channel thanks for sharing... im not seeing the vision at the moment but i am looking forward to the end product!

@montyholland3357 4 жыл бұрын

Welcome to the channel and I'm sure you will enjoy it as much as I do

@ShadeTreeKennyT 4 жыл бұрын

Just a suggestion....I think it would look cool if you continued the theme from the front and do the whole car.

@LunarOutlawsGarage 4 жыл бұрын

I think you right

@timemerson4162 4 жыл бұрын

I wish i could get into going the rat rod direction. my OCD won't allow it lol.

@LunarOutlawsGarage 4 жыл бұрын

I hear you man it is hard to break away from the normal thought process.

@fluffy1346 4 жыл бұрын

Tshirts looking awesome

@LunarOutlawsGarage 4 жыл бұрын

Thanks Mr. fluffy

@fluffy1346 4 жыл бұрын

Keep up with the great merchandise

@jefferystolzman9652 4 жыл бұрын

It looks evil good job man

@LunarOutlawsGarage 4 жыл бұрын

Thanks man🤘🤘

@amynorrad5854 4 жыл бұрын

Warm soapy water prior to suction cup dent puller

@moparnut6286 4 жыл бұрын

Thank you! Maybe some day people will have an attention span!

@prenticechafin 4 жыл бұрын

Just a suggestion, put some black paint drips with some of the red. Maybe a hair dryer to give some direction to them like like driving in the rain.

@LunarOutlawsGarage 4 жыл бұрын

That is an idea Definitely worth looking into. Thanks for that suggestion

@charlescarter6146 4 жыл бұрын

Do you think early 70,s cars can be rat rodded? That's a cool car, hard to come by. So don't let her be too rough, would be nice to look not too hawkish looking. Will be a fun ride. Just keep on keep,n on.

@michaellynch7800 4 жыл бұрын

Brian, Randy just told us about your sight! Subscribed, and got that little bell activated. Can’t wait to see your magic on Randy’s beast! Mike

@LunarOutlawsGarage 4 жыл бұрын

I am looking forward to this build

@montyholland3357 4 жыл бұрын

Welcome to the channel and I'm sure you will enjoy it as much as I do

@mikeobrien3744 3 жыл бұрын

Suction cups work great...if the car was made with Nippon metal. No chance on the 20 gauge American steel of the 1970's.

@thewholls7176 4 жыл бұрын

Hats off to you mate you are mad keen

@classiccarrebuilds2771 3 жыл бұрын

old cars are a hobby, a large part of the fun is bringing a car back from the dead not its value

@rodney1818 4 жыл бұрын

The crash bar is bent that door is no longer as safe unless the crash bar is repaired but none of my family will be riding on that side of the car so don't worry about it just straighten the outside piece of metal and make it look okay

@outdoorsmansgarage 4 жыл бұрын

I have one of those suction cup dent puller as a matter of fact mine looms identical to yours they don't work worth a crap man

@LunarOutlawsGarage 4 жыл бұрын

Lol nope not even a little. But people insisted that they did 🤣

@moparnut6286 4 жыл бұрын

One there not susposed to be used dry a little liquid soap and water helps......and you can use hot glue and stick it on you got PDR painless dent removal. Plus they are good for holding glass to install and move around in gasketed windshields.

@jimgee2676 4 жыл бұрын

lookin badasss

@LunarOutlawsGarage 4 жыл бұрын

Thanks man

@savgre9400 4 жыл бұрын

Randy sent me AAR looking forward to checking your channel out.

@LunarOutlawsGarage 4 жыл бұрын

Thanks for checking out the channel man I hope you enjoy the project

@herbiederby3394 4 жыл бұрын

Hey Brian a nice start to the madness.....😆.. ...be well.....🤘👍

@LunarOutlawsGarage 4 жыл бұрын

Lol thanks man

@raulpompa9173 4 жыл бұрын

Still reminding me of INFORMATION SOCIETY'S apocalypse 73 satellite.. I kind of love it, I wanted to do this to a clapped 73 charger I used to have but only dared to mount 8"-12" American racing vectors on it

@LunarOutlawsGarage 4 жыл бұрын

That would have been a fun build

@deliveryguyrx 4 жыл бұрын

That looks totally bitchen!! You have inspired me to continue on my 'poor man's paint job' of my '65 Studebaker. I like the 'drove through heLL' concept! Good job with those Turbo cans! At some angles,the black and red combine to make a nice shade of burgundy. I like this a lot better than the stock color.Good call on keeping the side markers. I'll continue to follow along on this build!

@LunarOutlawsGarage 4 жыл бұрын

Thanks man I really appreciate it

@chestnutquinton 4 жыл бұрын

Love the colour scheme please please do me a favour a sparkle/shiney up the wheels the car came with and fit with the new tyres to break the dark colour.. just to see how the car with new colour will look with shiney wheels

@tonydemovic355 4 жыл бұрын

Blacks the go looks super mean really cool

@moparnut6286 4 жыл бұрын

The 71 charger has flush mounted side markers.....and so does the 71 roadrunner/GTX.....but it's your way or the highway!

@LunarOutlawsGarage 4 жыл бұрын

I really like the 71 side makers Especially how they’re broken into three parts

@montyholland3357 4 жыл бұрын

I hope you keep the marker lights

@willr69420 4 жыл бұрын

Great job at dent removal! Hey Brian, I've followed your channel for a good while and am tickled that you are going to be building an engine for Randy at Auto Auction Rebuilds! I'm going to be following the build closely! Thanks so much for agreeing to help a fellow youtuber out!

@LunarOutlawsGarage 4 жыл бұрын

I am always down for an adventure🤘

@MrBo-sg6hu 4 жыл бұрын

I get doing it on the cheap, but I don’t know about that one cuz. If your happy with it, then thats all that matters. I think I would of just used the gallon sized rustoleum on it.👍

@LunarOutlawsGarage 4 жыл бұрын

I know I will not do another rattle can paint job on a car I am getting too old for that lol. Not to mention there’s definitely no comparison between a rattle can paint job and a proper paint job done with a gun🤘

@MrBo-sg6hu 4 жыл бұрын

@@LunarOutlawsGarage I get it/ sometimes you need some quick gratification so as not to lose interest in a project. For me, I keep more of a mechanical mindset. I have what a lot of people would consider a beater (84 squarebody truck), but it runs good, has cold a/c, and is very reliable. This allows me to make little cosmetic fixes here and there, and not hate the thing, or get completely overwhelmed.

@montyholland3357 4 жыл бұрын

Should have used Rust-Oleum Turbo. Then Rust-Oleum 2x clear coat. They turn out acceptable paint jobs. Way better than typical rattle cans with a 3in cone pattern. It has a wide about 12 fan. Not a cone. More professional quality results. But it only comes in two colors I believe i may be wrong. This will not be a as good as a shop. But with good prep, close. Thinking of doing that on my 4runner. Oh and a pdr kit would have worked much better for you.

@JT-un7dc 4 жыл бұрын

@@montyholland3357 pdr kit?

@montyholland3357 4 жыл бұрын

@@JT-un7dc painless dent repair. You can buy the basics kits for about 50 to 100. More delux kits will be more expensive... They're very effective. And simple to use. Yes you may need to repeat the process multiple times. But it's faster, more efficient, more cost effective.