Рет қаралды 426
A demonstration of how the M-Thing can add a bit extra to a Mother 32, before playing along with a D-Thing/DFAM pair, then a Matriarch, and finally a Roland System 100. (...using a Keystep Pro offscreen.)
thewessens.net/DFAMThing/DFAM...
M-Thing Specifications
===================
Digital LFO (Uses the Electric Druid TAPLFO chip)
- 0.5Hz to 20Hz (roughly)
- 16 waveforms, organised in 2 sets of 8
- 1x, 2x and 4x speed options using a toggle switch
- clock out
- externally sync (within the supported frequency range)
- normal and inverted outputs available simultaneously
- uni-polar (0 to 5V) or bipolar (-5V to 5V) output
White Noise
Sample & Hold
- signal input normalled to white noise
- clocked by the LFO
Crossfader
- 2 arbitrary inputs
- default fades between a low-pass (brown-ish) noise to a high-pass (blue-ish) nosie
Sub-oscillator
- Square wave output at -1 or -2 octaves
- Optional mixed output (full original signal with adjustable sub level)
Attenuverters/mixer
- 3 attenuverters
- switch controls inclusion in a mixed output
- each is normalled to 5V (so it gives -5V to 5V), the LFO and the S&H in turn
- usual scale is from -1 to +1 times the input, but jumpers on the board can switch them to -1 to +2 times (up to 10V).
Multiples
- 2 three way multiples