Mac 3200 Chainsaw Fuel Line Repair

Рет қаралды 15,387

Жыл бұрын

The fix for a common problem I see with most older Mac chainsaws. The fuel lines rot away and the repair can be made a lot easier if you follow these simple steps. Replace that rotten oil feed hose too!
#smallenginerepair

Пікірлер: 58

@davidjones293 2 ай бұрын

My Grandpa gave me a chainsaw in exchange for some tree work, but the primer bulb was busted. Upon tearing it apart, the fuel lines were all crumbs floating around…your video helped me greatly, got that sucker running tonight! Thank you sir

@TheGreasyShopRag 2 ай бұрын

Good job fixing Grandpas saw!

@cindygardner2839 8 ай бұрын

This is the best video to show detail on how to change fuel line and put the chainsaw back together. Have never had to replace fuel lines and this walked me right thru!! Thank you!!

@TheGreasyShopRag 8 ай бұрын

You're welcome and thanks for watching!

@davek.7500 9 күн бұрын

Thanks, big help with the fuel line issue I have. At the 6:40 mark, I'm more of a big fan of the cell phone pics so I can refer to the parts layouts. Thanks again Greasy...

@noway7476 Жыл бұрын

Brotherman, you've made a complicated task achievable even fer a dummy like myself. Bravo! encore!.

@TheGreasyShopRag Жыл бұрын

Thanks for watching!

@glennyee5607 10 ай бұрын

The taper cut on the oil and fuel line....I"m impressed. Kudos to you!

@TheGreasyShopRag 10 ай бұрын

Thanks for watching!

@RickSchmidt-zy3yz Жыл бұрын

I just used this video to repair my 1998 and it works awesome. $11.00 in parts and I'm back in action. Thank you for the easy to follow instructions.

@TheGreasyShopRag Жыл бұрын

I'm glad to have helped!

@ianwhite6670 Жыл бұрын

Same! Thanks for the great video.

@paulwood2995 2 ай бұрын

Great video, very easy to follow. Thank you so much easy fix with your help.

@TheGreasyShopRag 2 ай бұрын

Thanks for watching!

@kirbyhade2961 11 ай бұрын

Thanks for this instruction 👍 I was floundering until I found your vid!

@TheGreasyShopRag 11 ай бұрын

Glad to have helped. Thanks for watching!

@JustinZobel-c1s 8 күн бұрын

Thanks I appreciate you a lot followed your video step by step and she came right together and she runs like new now, thanks!

@TheGreasyShopRag 8 күн бұрын

Good job on that repair. Thanks for watching!

@treggorringe2970 3 ай бұрын

Great direction

@JA-oi3ld 10 ай бұрын

Thanks man! This one one of the best diy videos I’ve ever used.

@TheGreasyShopRag 10 ай бұрын

Glad to hear it. Thanks for watching!

@matthijsverweijmeren6114 3 ай бұрын

For the oil line I use 5mm NBR rubberhose. What I noticed is that the oil gear on the crankshaft is not locked with a key against rotation. it's spring loaded under the flywheel and hold on by friction. I used loctite press fit to fix the worm gear on the cranskshaft. I also noticed the oiltank vent is clogged or stick together of by the use of biobased oil. Also be very carefull with repositioning the flywheel especially with the spring underneath pushing it up out of key position.

@TheGreasyShopRag 3 ай бұрын

Thanks for the tips.

@arnulfob3454 Ай бұрын

Awesome work , I was wondering were I can find parts for my Mac 3200 ?

@TheGreasyShopRag Ай бұрын

Sorry, dunno. Some mac model parts are available through Husqvarna dealers but not the 3200.

@arnulfob3454 Ай бұрын

@@TheGreasyShopRag thank you and keep up the good work

@jimcarter4929 Жыл бұрын

Great video. Bought mine in 90's sometime and rarely use it, so now it needs this whole procedure done. On the bottom of saw it says Walbro carb. Can't seem to find a kit for it. Looking for good parts dealer online. Any help would be great. This was perfect size saw for what I needed and liked it a lot.

@TheGreasyShopRag Жыл бұрын

You'll need to remove the carb and get all the numbers off it then go to Walbros site and find the kit number. Fromm there most any shop can get you the kit.

@patsyts4331 Ай бұрын

Phenomenal video thank you.

@TheGreasyShopRag Ай бұрын

You're welcome. I hope it helped.

@wesleybuttrum7704 11 ай бұрын

It’s 9 o’clock here I’ve got the saw part then think dang can’t get the tank off let me see if someone knows 😅

@mpilksjr Жыл бұрын

Do you have a part number for the air filter media you cut and used?

@williambray4134 Жыл бұрын

I had one of those in 1998. I got it for $99 at Target I believe. Ran good, but was pain for me to start being a Southpaw. My fingernails would get caught on the air box cover when pulling the rope. I ripped fingernails several times.

@TheGreasyShopRag Жыл бұрын

Ouch!

@rooster3019 Жыл бұрын

The "taper" we cut on the tubing is what I call a "quill". All of that Tygon tubing I see sold for small engine repair is of that yellow tint instead of the clear type sold in hardware stores. I wonder if there is a difference?

@TheGreasyShopRag Жыл бұрын

Dunno, never bought fuel line in a hardware store. I've always just used whatever brand the shop was stocking without giving it much thought. I've never had much for problems with it so never suggested a change.

@bobspatafore1696 Жыл бұрын

Thank you

@TheGreasyShopRag Жыл бұрын

Thanks for watching!

@OldSneelock Жыл бұрын

I just spent way to long fixing a cracked bar oil tank fill spout on a McCulloch 3516. It has a very similar tank to the 3200. Have you run across this and is it possible to just buy a new tank somewhere? 😎

@TheGreasyShopRag Жыл бұрын

It doesn't look like that tank is available anymore.

@tedmiller1745 Жыл бұрын

Wish I new the factory setting for H and L to start the tuning process

@TheGreasyShopRag Жыл бұрын

I don't have any factory specs for that saw but I'd start at 1 1/2 or 2 turns on bothe screws.

@kgpearce1 17 күн бұрын

The supply line with a filter will go to the bottom of the tank but how far into the tank does the return line need to go

@TheGreasyShopRag 17 күн бұрын

Just far enough so it won't get pulled out accidentally. Maybe up to an inch.

@yogibaer2160 5 ай бұрын

Why is there two holes in the gas tank. I believe you said input vs output but i still can't figure out where the second fuel line goes into if there's no port to connect to on the carburetor there's one coming from the tank into the left side and the premier bulb to right side of carburetor do I need a splitter so to speak but where does it go to

@TheGreasyShopRag 5 ай бұрын

Its a big circle with the primer, carb and fuel tank all players. The line from the tank with the filter goes to the clutch side of the carb. Then from the other side of the carb run a line to the short stem of the primer. Now the primer has just one long stem left and that is the return line to the tank.

@foegetful 8 ай бұрын

Where can I get a chain tensioner kit for a MAC 32 chainsaw? Thank you

@TheGreasyShopRag 8 ай бұрын

Have you checked ebay?

@Wyatt1314. Жыл бұрын

My carb's return line is smaller diameter than the fuel line and is loose and just spins. I thought this was possible yet its not looking good.

@TheGreasyShopRag Жыл бұрын

Ya I don't know why they felt two different sizes was the way to go.

@handyman3320 Жыл бұрын

I had one of these the fallopian tube was always getting stopped up. HEHEHE 🤣

@ricknauertz1269 Жыл бұрын

Chainsaw flue lines

@georgwillmes-lenz3630 Жыл бұрын

What‘s the diameter of the fuel line?

@TheGreasyShopRag Жыл бұрын

Sorry, we sell it by the foot no matter what diameter so I rarely pay attention to sizes.

@j.chrisbeck7492 Жыл бұрын

I'm inside one right now....you should see my carb...I got pics

@TheGreasyShopRag Жыл бұрын

When they are really bad I consider replacing them.

@hockey1829 Жыл бұрын

Ugh hands are un the way too much.

@TheGreasyShopRag Жыл бұрын

Ya you'll get that. I know I could make better videos if I were making videos on my time just for youtube. Thats not the case. I'm on the clock at work just recording the event. The boss don't pay me to "make videos" but he will let me record repairs. Thanks for watching.