Apple MacBook Pro A1707 Keyboard Replacement. In this video we will show you how to replace the keyboard for MacBook Pro 15-inch A1707. Go to our website for parts: www.appleparts.nl www.appleparts.nl/Macbook-Pro...
Пікірлер: 41
@Neisan92 жыл бұрын
Started well but spent so much time on breaking ever single key while missed very important steps. Your video motivated me to do it. It took 6 hours for me and eventually was a successful project but certainly could not do it with just this video.
@springer-qb4dv3 жыл бұрын
Insane amount of work just to replace a keyboard!
@GabrielRodriguez-um8fi3 жыл бұрын
so what tools did you used for each step
@OMNI_INFINITY6 ай бұрын
Thanks for posting that video. Yesterday sadly decided to use tweezers in that little hole under the 2 pads in center of a keyboard button (under the switch) to pull up on that metal to try to make it higher so it would touch switch easier. Sadly, although was careful, a tiny split happened between those 2 pads and a bottom corner pad (split the White metal frame slightly) and after that the h, y, and 6 keyboard buttons all didn’t function. (Was the h keyboard button) Pondering putting some solder in that split, but I at least want to know what is under that White metal frame without dismantling that entire computer. Thankfully visiting shenzhen, so there are some options…although only about 10 days to get that done this trip
@cadava47789 ай бұрын
You never actually show the replacement :/, when the new board is attached?
@codingwithnarayan60582 жыл бұрын
which generation of new keyboard you have installed?
@MrLinartas2 жыл бұрын
They are holding him tied up and tracks if he is working or doing something else :o
@skyland49295 ай бұрын
No, they were afraid that he would run away 😃
@VictorTheSnake863 жыл бұрын
thanks for the contribution! So, I have this question about the replacement piece itself, does the keyboard replacement come with the backlight part or the idea is to reuse the original backlight? I ask this cos I've seen some listings including just the backlight mechanism (not the keyboard) and I want to buy it correctly.
@snipperacoustics7 ай бұрын
Did you get the answer as i have the same question
@mbnnyc4 жыл бұрын
Hi, thanks for this video! question... at what time mark in the video do you remove a) the keyboard ribbon cable, b) the trackpad ribbon cable and c) the touchpad ribbon cable?
@ApplepartsnlHeerenveen4 жыл бұрын
Hi, after removing the logic board you can remove all the attached cables on the keyboard.
@MrPnew13 жыл бұрын
Maybe watch it and see :) If you are unsure of which cable is which, Google an ifixitguide for this model. THINK
@jack87524 жыл бұрын
Hi i have a question. I spill water on my keyboard and brought it to apple. they have sayed that i need to change the topcase coz the keyboard is not working properly. can i change only the keyboard?
@MrPnew13 жыл бұрын
Because they only want to sell the complete top case. That's the way Apple works
@leocjm2 ай бұрын
Incredible to see Apple bending aluminium in “half of the spots” to try to make it imposible. I removed the aluminum drilling them. I could remove almost the entire keyboard.
@JasonAguirre4 жыл бұрын
I don't understand what's happening around @7:15. After you pop the keys out you seem to be peeling the black part out but on mine there are what look like little rivets holding that in. What I'm missing is how you then get the new keyboard into place if those rivets are still there after you pull out the black material...
@mahmoudnadi19924 жыл бұрын
The rivets keep the whole keyboard in place, removing those rivets with a Dremel will allow the whole keyboard to come out as one piece. For some reason, he decided to break apart the keyboard and remove it piece by piece.
@dajeong344 жыл бұрын
thanks! This video is really helpful. I have a question..Is the product in this video correct for 2017 macbook Pro 15-inch TouchBar? I went to the repair shop and they said that this product cannot remove the keyboard. < I can't believe this.😭
@dylanevans56443 жыл бұрын
The reason for this is because a 'normal' repair shop will not go to this level of work, or even know it's possible. The keyboard is rivited to the top case - that's why he has to destroy it to remove it. When Apple replace the keyboard (which they do for free on the 2017 because of their awful keyboard design) they replace the entire top case, aluminium and all.
@Sirkamisori3 жыл бұрын
@@dylanevans5644 I went to the apple store today and they are charging $690 to replace my keyboard for my 2017. If it's free for the 2017 I'm going to be pissed.
@sergey64823 жыл бұрын
Try to care more about clients screen, as it is so delicate, and can be damaged by the parts of the keyboard that you break out, moreover, these particles of debris can get into the space between the screen and the bottom case and damage the matrix cable, in general, it is better to separate the screen during such operations. Nitrile gloves on your hands would be better for general quality of work.. than this electro-static safety wristband ) Why not to use screw instead of glue? Is it possible to completely remove rivets from bottom case and use screws in holes which holds rivets?
@marioyanez18834 жыл бұрын
Hello, good videos, congratulations. for the Macbook Pro A1707 can the SSD be changed and how would the change process be done? Regarding the battery, it can be replaced and which one do you recommend placing it. Thank you.
@skyland49295 ай бұрын
I know the SSD can't be changed alone because they were soldered onto the lotical board. But the whole board can be replaced which is more expensive.
@Discominaj13 жыл бұрын
hi repair shop changed my keyboard and my internal microphone is not working at all. Whats the problem?
@ApplepartsnlHeerenveen3 жыл бұрын
You have to go back to the repair shop and let them check the microphone flex, maybe it's damaged or not plugged in. Good luck
@hcrgeek14 жыл бұрын
FYI, if you remove the pegs, there are screw holes underneath. This is why the keyboards usually come with dozens of extra screws.
@skyland49295 ай бұрын
Wow, I had thought that it would be a changing a complete panel. Imagine if a couple of keys were placed at wrong places.
@sminagawa4 жыл бұрын
Can you help me please? I replaced my trackpad on MacBook pro A1707 but now the keyboard doesn't work and I cannot login! The trackpad works. What did I do wrong?
@ApplepartsnlHeerenveen4 жыл бұрын
Just check the trackpad and topcase cable, these both parts communicate with each other. Last but not least do not forget about the trackpad, maybe you bought a faulty trackpad. Good luck
@sminagawa4 жыл бұрын
@@ApplepartsnlHeerenveen Thank you. I noticed that there is this small latch/clip I needed to press down after connecting the cable to the trackpad. Once I did that, the keyboard started working again!
@GurjVirdee2 жыл бұрын
Best way to remove the faulty keyboard is to Dremel the rivets off. You're showing a very bad way.
@1pcmedic2 жыл бұрын
I would like to know the name of the guy who got a big bonus and a pat on the back for such a horrible engineering design...........
@alekseev47152 жыл бұрын
J… how difficult was it to put the camera closer?! Could sacrifice the idiotic music for it)