A1707 macbook pro touch bar change the keyboard

Рет қаралды 21,069

SOSfix Electronics

4 жыл бұрын

plz subscribe
to send your device for repair:
/ sosfixelectronics
txt +1 850 242 5552

Пікірлер: 36

@springer-qb4dv 3 жыл бұрын

the most difficult keyboard replacement ever! it takes just few min to replace keyboard on most other laptops

@SOSfixElectronics 3 жыл бұрын

You right

@Neisan9 2 жыл бұрын

Great video. Very helpful. I fixed mine and took 6 hours. By the way it was my first time opening a macbook.. wish you talked about every step you do.

@ssalmankhan 2 жыл бұрын

where did you get your keyboard from? Any recommendation? I want to replace keyboard.

@ff090 2 жыл бұрын

@@ssalmankhan Amazon for $51. I have to to warn you that it was a very hard task. Took about 8 hours and once I was ready to say this is dead and I decided to work on it one more time and luckily it worked. The hardest part is figuring out how to open each part. Good luck

@SOSfixElectronics 2 жыл бұрын

Glad it helped!

@ssalmankhan 2 жыл бұрын

@@ff090 Thankyou so much for the detailed explanation.

@X0guilliman0X 4 жыл бұрын

Hi, do you put screws on top of the cutted metal rivets that hold the keyboard before? or you first removed them

@smylmvv 2 жыл бұрын

@SOSfix Electronics Good video tutorial! I have a question, is there a possibility to replace the keys above "Function, Esc, Brightness, Sound, Play, etc" by Touch bar on an old Macbook Pro from 2015 or below?

@SOSfixElectronics 2 жыл бұрын

Sorry no you cant that macbooks not made for touchbar

@rvrt1829 3 жыл бұрын

Hi great video, and thank you for posting and sharing. I am about to attempt this exact job on an A1706, so when you lifted around the locating rivets can you repress these down again or do you need the screws, from what I understand you can use the 000 Philips screws for the previous 2013-2015 model keyboard replacement, am I correct?also do you not need to remove the battery on this or the A1706 model I would appreciate any clarification you could give me on this. Thanks in advance

@SOSfixElectronics 3 жыл бұрын

rivets will left a holes that the keyboard screws will fit in, i think a1706 has same battery, so no need to remove it.

@rvrt1829 3 жыл бұрын

@@SOSfixElectronics Thank you for the info, One last question is it best to disconnect the battery first, I think ?

@adiands850 6 ай бұрын

@@rvrt1829 did you attempt this on your A1706 and how did it go? I am thinking of doing the same. Thanks

@rvrt1829 5 ай бұрын

@@adiands850 I got everything ready, I purchased a new top case (from China) with the keyboard attached, I procrastinated so long that the laptop I was fixing (one that I purchased through insurance from water damage) ended up coming right so I didn't have to do it, so I sold on the top case, Laptop still working.

@snewbitt3523 Жыл бұрын

My MacBook keyboard has no keys working at all,the light for caps lock does not come on when pressed and there is no backlight although it briefly came on for a moment but the second I went to move the laptop it flickers off.the Touch Bar and laptop is in full working order. Do you think it could just be a problem with the cable connecting the keyboard to the motherboard has worked it’s way loose ?as it was in a suitcase going across rocky concrete so it was vibrating in my bag

@tmburns4 3 жыл бұрын

Great video, thank you! What did you replace the metal rivets with? Screws?

@SOSfixElectronics 3 жыл бұрын

if the rivet left a clear hole the screw will fit in

@VictorTheSnake86 3 жыл бұрын

@@SOSfixElectronics and where do you get those screws from? do they come with the keyboard replacement? Also, I've seen some sites that sell the backlight separately, and that makes me ask whether a keyboard replacement comes with the backlight "by default"? thanks a lot for the contribution.

@SOSfixElectronics 3 жыл бұрын

@@VictorTheSnake86 not all the keyboards came with backlight, i usually use the backlight from old keyboard. if you need extra screws get them from ebay, or u can skip some holes and use that screen for the new holes

@EvilDogMedia 9 ай бұрын

Even worse than the Lenovo ThinkPad X240/X250/X260/X270 units and they were bad enough.

@OMNI_INFINITY 6 ай бұрын

So basically it’s more work to replace that than any other part of that computer

@thierry1530 2 жыл бұрын

Hello, nice tutorial Would it be possible to know where to get your keyboard? Thank you

@SOSfixElectronics 2 жыл бұрын

ebay amazon aliexpress

@silentcloudtech Жыл бұрын

если клепки заново не восстановить(клей/поксипол/саморезы) то клавиатура будет болтаться при нажатии. на видео показано как нужно делать но по выходу клавиатура не приклеена. Нужно учитывать и тот факт что сама клавиатура между клавишами проклеена еще двух-сторонним скотчем, чтобы она вообще жестко стояла на месте.

@terencewu228 Жыл бұрын

i am trying to replace my A1707 keyboard, but i am facing difficulty. i don't have the right screwdriver size to unscrew the keyboard. May you tell me the screw size?

@SOSfixElectronics Жыл бұрын

philips 00