MAGNUS SINGLE BEVEL 150 gr Broadhead Test

Рет қаралды 10,807

Ай бұрын

This is a test of the 150 gr Magnus single bevel head.
Here is summary of my 2024 Testing Procedure & Scoring w/the scores of this head posted in parenthesis as well.
1. Flight Forgiveness (20%, 18 pts)
I'm using a Killer Instinct SWAT X1 crossbow, mounted to a BOG tripod, shooting a 670 gr Bishop Archery GOAT bolt (300 fps) at 30 yds. Field points consistently hit in the 10 ring & bullseye. I use the exact same bolt to shoot the broadhead. The only difference in the two shots is the broadhead's flight forgiveness vs that of the field point. A bullseye gets a score of 11/10, or a perfect score of 20 + 1 Bonus Point. The 10 ring gets a 10/10, or 20 points; a 9 ring gets a 9/10 or 18 points...& so forth, with each wider ring being 1/2" farther from the bullseye. Mechs are also given 1 Bonus Point for extra forgiveness.
2. Cut Size (20%, 8.87 pts)
The more tissue being cut, the more lethal the head, all else equal. The entrance cut, total cut, & width of the cut (a crucial variable for bloodletting) are all scored:
The entrance cut size is compared to a standard of 2.5" then that fraction is weighted to 7% of the score. (1.03" = 2.89 points pts)
The max cut size is compared to a standard of 2.5" as well, then that fraction is is weighted to 7% of the score. (1.03” = 2.89 pts)
The max cutting diameter is compared to a standard of 2.0", then that fraction is weighted to 6% of the score. (1.03" = 2.89 pts)
3. Blades (20%, 19.05 pts)
Initial sharpness (9%, 170 grams = 10/10 = 9 pts +.3 pts bonus = 9.33 pts) & Edge Retention (9%, +25 grams = 9.5/10 = 8.55 pts) are measured using the Edge On Up Sharpness Tester. The pressure needed for a blade to cut thru a copolymer wire is measured in grams.
Edge Retention is the loss of sharpness after the head is shot in Penetration Test 1, thru 1/2" MDF & 2/3" rubber foam mat & Clear Ballistics FBI gel. For every 50 "grams" of sharpness lost, 1 point is deducted from 10.
What are some sharpness scores for common edges?
A butter knife takes 2000 grams of pressure to break the co polymer wire.
A new high end cutlery edge: ~ 375 grams of pressure.
A utility razor blade: 200 grams.
Based on the many broadheads I have tested, here is my scoring scale:
Out of the Box Sharpness:
0-200 gr: 10
201-300 gr 9
301-400 gr: 8
401-500 gr: 7
501-600 gr: 6
601-700 gr: 5
Ease to resharpen or replace blades is judged & given 2% of the score. (6/10=1.2 pts)
4. Penetration (20%, 18.43 pts)
There are 2 penetration tests:
Pen Test 1: 1/2" MDF, 2/3" rubber foam mat, Clear Ballistics FBI gel. Depth of penetration is compared to a standard of 9" & weighted to 10% of the score. (8.5" = 9.44 pts + bonus L/W/2 = +.85 pts = 10.29 pts)
Pen Test 2: Layered cardboard. # of layers penetrated is compared to a standard of 70 layers & weighted to 10% of the score.
( 51 layers= 7.29 pts+bonus L/W/2 = +.85 pts= 8.14 pts)
5. Durability (20%, 19.25 pts)
Each head is shot thru 1/2" MDF 3 times. Its condition is judged 1-10 & weighted to 12% of the score. (10/10 = 12 pts)
If a head survives that, it is then shot thru 22 ga steel plate twice. Its condition is judged 1-10 & weighted to 5% of the score. (8.5/10 = 4.25 pts)
If a head survives that, it is then shot into concrete once. Its condition is judged 1-10 & weighted to 3% of the score. (10/10 = 3 pts).
Steel plate & concrete are certainly not "realistic" mediums, but they do reveal the outer limits of a head's durability.
BONUS:
+.5 pts thick blades .060"
+.05 pts Single bevel rotation: 5 degrees @ 11.5"
TOTAL SCORE: 84.15 pts = 8 Golden Arrows
Price: $18.33/head
Special Notes:
Please check out my sponsor, Stay Sharp Guide. staysharpguide.com or @Innovative Outdoorsman They make excellent broadhead sharpeners. The support I receive from them has helped me improve my channel
I also have some Broadhead Discount Codes I can share:
Evolution Outdoors: LUSK10 saves 10% on any order.
TRIFECTA: LUSK10 saves 10% on any order.
SEVR: LUSKFIVE saves you $5 on any order & can be used on top of any online sales.
Kayuga Broadheads: LUSK10 saves 10% on any order.
ZEUS & HERA Broadheads (New Era Archery): LUSKFIVE saves $5/pack
AFFLICTOR: LUSK10 saves 10%
Tooth of the Arrow: LUSK19 saves 10%
Crimson Talon: LUSK15 saves 10%
Bishop Archery: LUSKFIVE saves $5 on any order
Easton Bowtruk 2: LUSK25 saves $25 and Free Shipping
Lathrop & Sons Synergy Footbeds: LUSK1000 = 10% OFF
Contact-Archery.com (formerly Method & Vector): LUSK10 saves 10%
Ozcut Broadheads: LUSK10 saves 10%
Accubow: LUSK10 saves 10%

Пікірлер: 104

@keystonestatebowmen3128 Ай бұрын

Can’t beat a Magnus head in my opinion. American made, using American materials and American labor. Scary sharp straight out of the package, amazing customer service and of course their lifetime replacement guarantee is amazing! Plus even in today’s economy these heads are very affordable. Magnus for my money!

@LuskArcheryAdventures Ай бұрын

Thanks for sharing

@mikenutto396 Ай бұрын

This looks like a beast ! Hope your doing better , good to see you release a video

@LuskArcheryAdventures Ай бұрын

Thank you. I’m improving a bit day by day

@deanbrantley Ай бұрын

Very good performer. Good well soon John.

@LuskArcheryAdventures Ай бұрын

Thanks brother

@StandingGoatsRescue Ай бұрын

That’s definitely a fine broadhead! I’ve been a long time fan of Magnus, I’m so glad they finally released that head…it’s going to be a game changer for wild pig hunting! Thanks for sharing your test results with us!

@JohnLuskOutdoors Ай бұрын

Yep. Thanks

@bowdude33 Ай бұрын

They need a 100 grain solid of this

@LuskArcheryAdventures Ай бұрын

Right on

@kip.k Ай бұрын

While broadhead tuning with Magnus broadheads I actually hit the magnus head in the target with a fieldpoint. (Always shoot the broadhead first so as not to cut your fletching). Sent a picture to Magnus, Mike himself actually responded and sent me a replacement within a few weeks. Can't bear that.

@oldfatnugly Ай бұрын

i did the same with a black hornet at 25yds, mailed it back and they sent me a new one. great company

@LuskArcheryAdventures Ай бұрын

Yeah; he’s a good guy.

@Akeela.4 Ай бұрын

Lol I did the same thing. But has another head needing replaced. I even said I have this head too that's completely 100% my fault, and they replaced both heads anyway!

@True_flight777 17 күн бұрын

Serious killer blade with excellent stats thanks 🤝

@LuskArcheryAdventures 13 күн бұрын

Thanks for watching.

@michaelcurtis8114 Ай бұрын

#1 broadhead in your testing sequence in my opinion. First time I've seen a broadhead punch a hole through a cinder block and not bend or break. WOW!!

@LuskArcheryAdventures Ай бұрын

Thank you sir

@michaelcurtis8114 Ай бұрын

@@LuskArcheryAdventures you're very welcome

@jameswilson5562 Ай бұрын

Solid broadhead great video

@LuskArcheryAdventures Ай бұрын

Much appreciated

@frankbrowning328 Ай бұрын

Less width of cut is needed with a good single bevel broad head as the twisting through the target creates a nastier wound than the traditional double bevels that do not rotate. This head could another 0.020'' in thickness and a steeper angle grind to produce more rotation. Don't get me wrong it still did very well but I believe my additions would make it even better. Magnus is a great company. They stick behind their products 100%. I called with a question and the owner answered the phone right away and was willing to answer any questions I had. Great guy to speak with.

@JohnLuskOutdoors Ай бұрын

Yes, some believe that. The actual additional cut generated by even an extreme rotation is quite negligible, mathematically. But I have found they often breach bone more effectively.

@frankbrowning328 Ай бұрын

@@JohnLuskOutdoors In a single bevel broad head wound where there is a high degree of rotation, bones break more often than not. It also causes a longer wound path because the wound is twisted so it's longer. In this longer path more blood vessels, veins, tendons, etc have the opportunity to be cut so the wound channel is increased & there is a more lethal wound. I've seen this in deer I've shot with the double edged vs single bevel broad heads I've used. That being said I still use 3 blade, 4 blade and sing bevel broadheads. If I find a fixed blade single bevel 1 1/4'' or larger cut 4 blade that rotates 30 degrees or more and is accurate for my bows I'll probably stock up on that design and only use it for deer from then on.

@LuskArcheryAdventures Ай бұрын

Believe me, I understand the pluses and minuses of single bevel rotation.

@feralgrandad4429 Ай бұрын

man, this is going to be the one for me! Usual Magnus quality and single bevel. Yep, this is the one.

@LuskArcheryAdventures Ай бұрын

Good to hear

@bowdude33 Ай бұрын

The crimson talon croc out performs this one for sure make sure you give the croc a look

@oldfatnugly Ай бұрын

@@bowdude33 love the croc

@frankgulla8782 Ай бұрын

Definately! The croc is a great head, my vote for best single bevel that won't break the bank.

@timberg7377 Ай бұрын

I have taken many animals with Magnus heads, and their warranty is amazing, plus the customer service is beyond great.. I personally feel, you can't find a better head, doesn't matter which one you try.. I know that's a very bold statement, but, i would say try them, you will not be disappointed.. Geat video as usual.

@LuskArcheryAdventures Ай бұрын

Thanks for sharing your experience.

@michaelrosa5410 Ай бұрын

Looks like a twin to the Crimson Talon Cleaver, my favorite head. I didn't get the angle. It's a bit smaller diameter than the Cleaver. I'll say this right now. Whoever makes a 1.5 inch cut Cleaver type single bevel will take over the single bevel market,,,,and it's not hard. Crimson Talon Croc is 1.5 but without the Tanto tip,which WAS being worked on but now, not sure what's going to happen. Magnus has always produced great heads at a fair price. Glad they entered the Cleaver market.

@LuskArcheryAdventures Ай бұрын

Thanks Mike.

@olesrensen2989 Ай бұрын

..Hello Mr. Lusk 🙂👍🏻 I enjoy your videos very much. Thank you …. I have a thought : why doesn`t the broadhead producers focus more, on a smoother transition (sorry for my bad english) from the cutting pointy arrowhead to the ferule and shaft ? If you took the arrowhead you just tested, and filed/smoothed the start of the ferule down, so it would be “sharper” and start closer to the actual blade, wouldn`t it then penetrate deeper ?. Wouldn`t it be easier for the arrow to “work its way through more layers” in your cardboard test ? Best wishes from Denmark

@LuskArcheryAdventures Ай бұрын

That is the advantage of a one piece, machined 2 blade head. There is no transition between the ferrule and the blade itself. But those are much more expensive to make. And when it comes to penetrating in an animal, a very small lip at the end of the ferrule where it meets the blade is not a huge hindrance in penetration. it is not optimal, but it is also not very significant.

@MikeJones-vb1me Ай бұрын

Dang that is impressive after hitting the concrete!

@LuskArcheryAdventures Ай бұрын

Right?

@greekmaster1001 Ай бұрын

Wow it spun perfect after the brick test I just hope he makes it a little wider

@LuskArcheryAdventures Ай бұрын

Yeah, I prefer wider as well. But there are many who don’t think the diameter of the cut matters much. Of course it penetrates better with a smaller cut, but I want as much damage as possible while I’m getting a pass thru.

@SavagelandHunting Ай бұрын

Do a video breaking down the different types of steel, aluminum, Rockwell hardness etc.

@JohnLuskOutdoors Ай бұрын

I share all that information that is available to me in each video.

@LuskArcheryAdventures Ай бұрын

I try to explain that in each video, but perhaps I should do a separate video just explaining all of that.

@paulheberling2750 Ай бұрын

Less go!

@LuskArcheryAdventures Ай бұрын

@nakrysl89 Ай бұрын

Should test the Iron Will SB150 Buff. Essentially the same thing just with thicker and with better quality steel.

@LuskArcheryAdventures Ай бұрын

Yeah, I’ve tested all of the iron wills except for that one.

@user-ur2yy7if3d Ай бұрын

Which 2 or 3 broadheads that you’ve tested had the most rotation for single bevels? Thanks and love your videos!

@LuskArcheryAdventures Ай бұрын

Hard to remember exactly, but the Trifecta 125 gr and Crimson Talon Croc come to mind.

@user-ur2yy7if3d 17 күн бұрын

@@LuskArcheryAdventures thank you, God bless!

@timbow50 Ай бұрын

Could it get any better? That is an awesome head. 👍👍🔥👀

@LuskArcheryAdventures Ай бұрын

@austintarby9686 6 күн бұрын

Would love to see a total single bevel showdown unbiased just all side by side comparison

@LuskArcheryAdventures 5 күн бұрын

Thank you. My testing is consistent with every head I test...so any heads can be compared to any others, by watching the videos or reading the scores in the video description. The challenge with single bevels is there are SO MANY variations in them, all providing different strengths and weaknesses. Smaller diameters penetrate more deeply, but don't cut as much tissue. Slighter bevel angles penetrate better but don't rotate as much. Thicker blades rotate better and are more durable but don't penetrate as much...etc. It's nice to have the options to best suit your needs.

@mikedee5641 Ай бұрын

Best broadhead company imo. USA made! Magnus user for years. Debated on these for my upcoming bear hunt. Man I wish they offered 125 grainers. Had a pk on release but sold them regrettably. May have to get a pk. 50 lb dw not sure? 455 grs

@LuskArcheryAdventures Ай бұрын

That extra 25 gr will help your down range momentum a bit.

@tylermoore3024 Ай бұрын

John what are your arrow specs? Draw length? Thanks for the content

@LuskArcheryAdventures Ай бұрын

I usually share it in the vids. 27” draw, 67#, 500 gr

@gregk7012 Ай бұрын

John, when you shot the concrete block on the first shot it looked like the knock came off but in the last frame the nock was still there. What did I see fly off the shaft? Also, and I’m not trying to pit one against the other, but can you say what you see as the differences between the Crimson Talon Cleaver 150 and this Magnus 150?

@nthewild Ай бұрын

The nock did fly out. You are seeing a collar in the last angle.

@LuskArcheryAdventures Ай бұрын

That was the nock that flew off. There is also a steel collar on the back end of the arrow.

@gregk7012 Ай бұрын

@@LuskArcheryAdventures I can see that. Thanks for clearing that up. When I was watching it impact in the first frame it looks like I was looking right in the end of an empty shaft and couldn’t pick up on the collar

@johnnycardenas3508 Ай бұрын

If I have a 28 inch draw length what arrow weight do you recommend with the 125gr head ?

@LuskArcheryAdventures Ай бұрын

It depends on the poundage of your bow and length of your arrows. You want to make sure the arrow spine is correct.

@garrettschienschang7898 Ай бұрын

Looks like a good head for a trad bow

@JohnLuskOutdoors Ай бұрын

Yep

@LuskArcheryAdventures Ай бұрын

Yep

@drewriggs812 Ай бұрын

Well, it's a Magnus. Of course it is going to be excellent!

@LuskArcheryAdventures Ай бұрын

@stick__shooter Ай бұрын

Not bad. I'd still prefer the wider cut and shorter profile of the Black Hornet.

@LuskArcheryAdventures Ай бұрын

Yeah, I like that head as well-each has its purpose.

@RngrfromtheMtns Ай бұрын

Looks a lot like another handful of inexpensive single bevels like the Crimson Talon Clever

@LuskArcheryAdventures Ай бұрын

Similar. Different steel

@baraksinz2937 Ай бұрын

I want heavier grain options

@LuskArcheryAdventures Ай бұрын

That’s a good thing to tell Magnus.

@baraksinz2937 Ай бұрын

I did. We’ll see.

@timothygorrell4714 Ай бұрын

Do they come in 100 grain?

@LuskArcheryAdventures Ай бұрын

Not at this point; only 150

@michaelvstheworld3680 Ай бұрын

Nice. Now, offer a 200 grain version

@LuskArcheryAdventures Ай бұрын

Not sure what they have planned

@daveunger8903 Ай бұрын

Looks like a copy of the GrizzlyStik Maasai.

@LuskArcheryAdventures Ай бұрын

Yeah, a few have similar styles-like the Crimson Talon Cleaver as well, and the Slick Trick Single Bevel.

@harveyfamily1281 8 күн бұрын

Why so small cutting diameter??? Disappointed 😢

@LuskArcheryAdventures 5 күн бұрын

The beauty with broadheads is there are SO MANY variations in them, all providing different strengths and weaknesses. Smaller diameters penetrate more deeply, but don't cut as much tissue. Slighter bevel angles penetrate better but don't rotate as much. Thicker blades rotate better and are more durable but don't penetrate as much...etc. It's nice to have the options to best suit your needs.

@georgezuniga2050 Ай бұрын

Purchased 2 pack for these Texas hogs

@LuskArcheryAdventures Ай бұрын

Nice

@vfonte218 Ай бұрын

The fact that it rotated only 5° kinda defeats the purpose of a single bevel.

@LuskArcheryAdventures Ай бұрын

Well, some people prefer it that way. Remember, it will rotate quite a bit more in an animal than it does in the gel. It’s just enough to split bone a bit.

@Canadaman4403 24 күн бұрын

How can you forget to mention how does it fly? All the other stuff is nice but if it won’t hit the target your review was wasted energy

@LuskArcheryAdventures 19 күн бұрын

I’m not sure what you’re referring to. I have a flight test in the video. That accounts for 20% of the score of every Broadhead I test.

@extremesam9 Ай бұрын

Basically a grizzly stick…

@LuskArcheryAdventures Ай бұрын

There are a few heads that have the same design nowadays. This one, one by Slick Trick, and one by Crimson talon.

@KombuchaPants Ай бұрын

Straight edge please not curved. Don’t what to have to buy a sharpening system to keep them sharp.

@LuskArcheryAdventures Ай бұрын

Yeah, straight is easier to sharpen. But curved tend to penetrate a bit more effectively.

@kavehadib5636 28 күн бұрын

How in the world is this design an improvement and top dollar at that. Such a sham. If this style was around 30 years ago it would be so out of date. It’s called a double bladed Bear and the single bevel actually seems primitive by any modern standards.

@LuskArcheryAdventures 19 күн бұрын

That’s interesting that you say that. This design and a single bevel two blade head has received quite a bit of support and attention in recent years. That’s why they came out with it. It’s all about demand, and there’s a lot of it right now.

@jasonsparks4601 Ай бұрын

Anyone else skip to 1:42 of every video to skip the same thing he's said repeatedly for the past 2 or more years? Great tests just got to skip the repetition of the intro.

@randallflores-qr8cs Ай бұрын

Give the guy a break bro. I'm sure he's doing that for people who are first time viewers.

@LuskArcheryAdventures Ай бұрын

Yeah, I know it’s repetitive for people who have watched my videos a lot. That’s why you have a fast-forward feature. But believe it or not there are thousands and thousands who have never watched my videos before. I get new viewers every week. And it’s important for them to know what’s up. Even as it is, I get hundreds of questions About information that’s included in my video describing the Broadhead test process. It saves me a lot more time to repeat it for a minute and a half that it does to answer hundreds and hundreds of questions saying the same thing.

@randallflores-qr8cs Ай бұрын

@@LuskArcheryAdventures Always some armchair expert trying to tell you how to do your videos. The rest of us are smart enough to know what you said before you sad it. Keep on doing what you do brother.