Ive been asked for a beginning to end video painting the parts on the Super A so here it is! Let me know if you have any questions. #majick #tractor #tractorvideo
Пікірлер: 26
@589193fz2 жыл бұрын
Good Job! I appreciate you verbal description of what you are doing as you go along!
@Ratshot19932 жыл бұрын
I find KZfaq is kind of lacking on quality tractor painting videos, it is getting better but slowly. That being said, I'd say your content is at the top. Well explained, camera angles are excellent and there's no skipping over/editing out parts.
@Marine-iu3ev Жыл бұрын
I am about to paint the chassis on my '47 B. your video was very helpful. I appreciate the time and effort you put into it.
@jodihaverdink3291
What type of Clearcoat did you use for painting your tractor? Thank you.
@danwingo7512
First off, throw that internal filter away. The only thing it is good for is restricting paint flow, second 30lbs. pressure at the beginning of the hose is around 16 to 19 at the gun, put a regulator on the gun to be precise. All this comes from 40+ years of experience, believe me I learned he hard way.
@Rottiezucco1 Жыл бұрын
Have you ever done a video on your paint booth set up?
@kevinjones8037
I haven't watched the entire video yet but was wondering if you painted your parts one time or
@Marine-iu3ev Жыл бұрын
One of the videos I watched later after yours mentioned that Majic paint has a tendency to fade. And the way to curb the fade issue is to wait a week after painting then cover with Majic High Gloss Lacquer. What is your thought on this?
@AshleyInscoe
Do l use hardner with the majic primer? Also do I use the same reducer primer ratio as the paint?
@robertstaskal65842 жыл бұрын
That paint gun comes with a 1.4mm nozzle. That seems very small. Would it be better with at least a 2.0 mm nozzle?
@AlabamaConstitutionalCrusader
Should have used acetone as a reducer cheaper and flashes off faster which means more shine 😉