Making a bolt with double threads - DOES IT WORK? - Lost PLA metal casting

Making a bolt with double threads - DOES IT WORK? - Lost PLA metal casting - 3d print to solid metal

Рет қаралды 3,886,566

2 жыл бұрын

Using the lost PLA metal casting I will turn 3d prints into metal castings in my DIY backyard foundry. I started by printing the models on my 3d printer. I then coated them with a ceramic material. I then fired the shell in my kiln and then poured metal into the shell. This is similar to the lost wax casting process.
------- Affiliate links to items used in this video ------
Pyramid A1.1 3d printer amzn.to/3wfg2t3
The best polishing wheels ever amzn.to/2VjG2GK
Overture 3d printer filament amzn.to/2UqwwRC
The links above are affiliate links. This means that, at zero cost to you, I will earn an affiliate commission if you click through the link and finalize a purchase.
Alternative link to Pyramid 3d printer www.toautotool.com/collection...
Oleg Pevtsov's bolt video • Десятизаходная резьба ...
3d models www.thingiverse.com/thing:469... / www.thingiverse.com/thing:470...

Пікірлер: 3 900

@robinson-foundry 2 жыл бұрын

Hey guys! This one was a lot of fun to make. I hope you enjoy watching it. Have a good weekend! 🔥🍻

@XXCoder 2 жыл бұрын

Sigh can't wait for autocaptions. KZfaq is so slow on those lately. Have a great weekend!

@alfonzeenrojas1418 2 жыл бұрын

Robinson Found made please brass knuckles my request

@zumbazumba1 2 жыл бұрын

Mr Robinson try using a metal mosquito mesh next time.It will add a lot of structure support.I use it to weld plastic parts together,i just run a soldering iron on it and it sinks inside the plastic.

@andreipendle1778 2 жыл бұрын

These were amazing castings, congrats!

@lucajo16 2 жыл бұрын

please do a stress test. I would really love to see this print finally have closer on weather the design would work or not.

@fleegster2240 2 жыл бұрын

These are probably the cleanest castings I've ever seen

@navydad82 2 жыл бұрын

Right?!

@R.Lennartz 2 жыл бұрын

That ceramic coating did an amazing job

@TheMrDarius 2 жыл бұрын

Yes

@ThePandaAgenda 2 жыл бұрын

Very fine sand

@armsupwithlawrence 2 жыл бұрын

Castingcouch would agree

@Denamic 2 жыл бұрын

The fact that you can see the layer lines clearly enough that it looks as if the metal was 3D printed directly just speaks of the incredible quality of the cast

@PrayingLotus 2 жыл бұрын

This man’s voice implies he’s basically the son of the How it’s made narrator

@justsadguy3153 2 жыл бұрын

well kid let me give a useful knowledge there is something called voice changer that most of youtubers used

@aw_dev 2 жыл бұрын

@@judahdoan5196 Rest In Peace

@jerrysouthside8597 2 жыл бұрын

@@justsadguy3153 KZfaq doesn’t have a voice changer my friend

@justsadguy3153 2 жыл бұрын

@@jerrysouthside8597 lol when I said they use YT to change voice there are something called editing tools.

@rachele7398 2 жыл бұрын

@@justsadguy3153 why do you think they use a voice changer?

@ToxicFruit 2 жыл бұрын

As an aircraft mechanic I have a problem with this concept. I love that it actually functions to some degree, but it doesn't actually perform the function as a bolt as far as I can tell. In effect the nut kind of "falls" through the threads, and it doesn't appear to be capable of actually holding anything together, not to mention the inherent sensitivity to vibration. Practical problems aside, fantastic work!

@prismatic9804 2 жыл бұрын

Yep. Looks great, doesn't work

@ericlewis3444 2 жыл бұрын

lol it's totally just a fun theory and a great toy. The uni-directional nuts could hold a bite, but would eventually snap, this is true.

@BillyViBritannia 2 жыл бұрын

Maybe as a pair they are useless but you could in theory save material by making those parts and pairing them with one directional counterparts of either orientation. As a bonus the parts would always fit and you wouldn't have to worry about picking the right pair.

@TheBadAssNinjaDude 2 жыл бұрын

if you look carefully, he makes 3 Nuts, one that screws clockwise, one that screws counterclockwise, and a third that screws in either direction. the former two would work just as well as a normal bolt and nut.

@ToxicFruit 2 жыл бұрын

@@TheBadAssNinjaDude Good point, I missed the two unidirectional nuts. Unfortunately it still ends up with the same effect of either being a conventional nut or not holding things together. There is the perk of being able to use left hand or right hand thread nuts though!

@NightRunner417 2 жыл бұрын

Regular nut: "Ok I'm totally going this way." Double thread nut: "Yeah sorry, I'm just gonna have to stay on the fence with this one."

@pvic6959 2 жыл бұрын

direction fluid :P

@NightRunner417 2 жыл бұрын

@@pvic6959 Fluid dynamics.

@rockstarproductions6377 2 жыл бұрын

Its' like a bipolar nut.

@annotten7413 2 жыл бұрын

Finally, a nut that doesn’t need blinker fluid

@NightRunner417 2 жыл бұрын

@Muttanna S H lol

@Mistertbones 2 жыл бұрын

I have to agree with you, the layer lines look cool. The weekend is always great, as I get to watch some of my favorite casters, such as you, BigStackD, ArtbyAdrock, and VOG, just to name a few. Another great casting.

@robinson-foundry 2 жыл бұрын

Thank you!

@mariahmayers8869 2 жыл бұрын

@@robinson-foundry Missed opportunity to call it the Impossibolt

@J.DeLaPoer 2 жыл бұрын

Nicely done! A double-threaded bolt is one of those random things I always wondered about as a kid, but haven't given a thought to in about 20 years and never expected to actually see. As a sidenote, it's not a real project unless you're borrowing various kitchen items.

@kale991 2 жыл бұрын

Wow your casting methods seem way better than most of the stuff you see in KZfaq. It may be a lot of work but I think the results speak for themselves

@Verlisify 2 жыл бұрын

Thank you, KZfaq Algorithm. Finally gave me a really cool channel

@pvic6959 2 жыл бұрын

this guys got the best molten metal pour ive seen on youtube. this guy is _skilled_

@patrickfaust8104 2 жыл бұрын

Same here 😁

@chrisakaschulbus4903 2 жыл бұрын

yet any 30 second shit with a cute animal will get sooo many more views. pretty much no effort except for holding a smartphone

@AmaroqStarwind 2 жыл бұрын

How do we always end up in the same place?

@zwingler 2 жыл бұрын

Dog Woof woof

@DGK-kv6ky 2 жыл бұрын

I see he hasn’t uploaded since this video. His wife prolly seen him using the Pyrex. RIP man :(

@TheBrickagon 2 жыл бұрын

Rip :((

@Agnes.Nutter 2 жыл бұрын

? At the time of your comment he had uploaded two videos since this one

@DarkR3ignlol 2 жыл бұрын

All fun and games until the wife actually finds out.

@jasonhawks2225 2 жыл бұрын

@@Agnes.Nutter *WHOOSH*

@MrGivmedew 2 жыл бұрын

LOL we only own Pyrex because of me lol… it was a present for my wife before we married 10 years ago. I bought 4 of every single size and 8 of every single top! Since then I’ve gone as far as purchasing extra fakes of certain sizes and tops and made sure my wife understood that fakes DO NOT get used on a stove or in an oven!

@fukkitful 2 жыл бұрын

After years of watching "How It's Made," Ive never seen someone wrap wire around a casting. Yet it seems like a great idea.

@alexia3552 2 жыл бұрын

11:12 That is incredibly satisfying. You could sell this as a fidget device

@Villanite 2 жыл бұрын

As someone who knows nothing about this stuff... I actually have always liked layer lines. I think the texture they add is pleasant.

@ovrsurge4689 2 жыл бұрын

I agree that layer lines add a nice texture to a lot of print related stuff, but the layer lines are weak points structurally in 3d printed structures. Parts often break along the layers like the grain of wood. Not really an issue with a cast like this because those layer lines are just surface textures and not part of the structure. I've seen some stuff where people experiment with different 3d printing methods designed to enhance structural strength with angled layers and such.

@Robert_McGarry_Poems 2 жыл бұрын

@@ovrsurge4689 Slumping is an art form where they purposefully create layers from mostly glass, but I have seen metal done that way too.

@ovrsurge4689 2 жыл бұрын

@@Robert_McGarry_Poems You learn something new every day. I've seen slumped glass before as a kid but never knew it had a name.

@PianistifiedForYT 2 жыл бұрын

@@Robert_McGarry_Poems wow...

@MadHeadzOz 2 жыл бұрын

@@ovrsurge4689 I've observed that a lot of tools seem to be taken up across different disciplines/trades. Almost as if a great new tool for one trade has been invented but in reality that tool is old new for the trade it came from. It seems obvious once we know. I find the slumping comment interesting for similar reasons. Having extensive experience in construction, 10 years or so in various types of concrete. The slump of the concrete was always critical to the work and result yet I'd not considered the art of mastering it. It was just something we did but the more technical the job the more critical every element of it became. Not many things I appreciate more than the mastery of any skill or craft. Definitely something to always aspire to. Always something to learn, often not from where we'd expect.

@GetMurcD 2 жыл бұрын

I love that you can still see the 3d printer lines in the casting. That liquid ceramic stuff works great.

@chiptune_ 2 жыл бұрын

I used to work at an investment casting titanium foundry - we had to wear gloves pouring the wax patterns, cause the oil from our fingerprints would show up in the metal casting afterwards. They can pick up crazy details

@normanbuchanan9710 2 жыл бұрын

I must say that is one of the coolest videos I've ever seen, double threaded bolts are somethings I've never thought about

@rdoggo9801 2 жыл бұрын

is fascinating how the 3d printer layer lines are capture in the metal casting. Just to proof how awesome of a casting job it was. And the layers definitely adds character to the final product

@onewa712 2 жыл бұрын

"I'll just throw out a scene of me using my wife's Pyrex so she gets mad" 😆

@d4v3tm 2 жыл бұрын

we know who slept on the couch that night

@ajeje1996 2 жыл бұрын

What a power play

@svtcobra8542 2 жыл бұрын

@@d4v3tm the couch is our friend🙃

@EddieOtool 2 жыл бұрын

Quite the saddistic. A gentle kind thereof.

@johnadler6987 2 жыл бұрын

I was about to say this lmao.

@SireSquish 2 жыл бұрын

Capturing the 3D printing filament lines means that your casting method is absolutely on point.

@11magic1man11 2 жыл бұрын

The layer lines on the finished project just shows how good you are when you can capture something that small through the entire project.

@tantilist1449 2 жыл бұрын

I like how he explains what he does the same way every time. He tells us what suspendaslurry is every time I love it

@zacharyfreese7758 2 жыл бұрын

This guy reminds me of Grant Thompson so much! I miss Grant.

@tommygallagher5747 2 жыл бұрын

Same :(

@casywalter7816 2 жыл бұрын

Same though

@pauleskridge7209 2 жыл бұрын

Thats funny he does sound like the king of random

@awwomegrasscalledalfalfa6437 2 жыл бұрын

@nixcrits6480 2 жыл бұрын

I still remember when it happened. He was probably my favorite KZfaqrs and it was one of the only times in the past few years that I've cried, rest in peace TKoR

@coastaku1954 2 жыл бұрын

Watching the nuts effortlessly slip down the threads is absolutely mesmerizing

@PeteKay 2 жыл бұрын

nut watching usually is mate :)

@Godric_71 2 жыл бұрын

It's a toy for the man who has everything. 😎🏍💨👍

@coastaku1954 2 жыл бұрын

@@Godric_71 Now that is a sales pitch

@EliosMoonElios 2 жыл бұрын

Low friction, hardly get any surface contact, but also that make it pretty must useless, a gimmick.

@mcdanjff 2 жыл бұрын

Same for me, I've never seen this before

@sanjaijain 2 жыл бұрын

I have never seen such innovative experimental casting video. Wonderful.

@robertjohnson5227 2 жыл бұрын

Definitely the first time I ever heard of a dual threaded bolt Thanks they are amazing

@brnmnr59 2 жыл бұрын

The layer lines look cool on this one. It’s like dragon scales.

@strongme80 2 жыл бұрын

I was actually thinking about that!

@LucasFreitas7 2 жыл бұрын

i don't even "see" the layer lines. what are they?

@brnmnr59 2 жыл бұрын

They’re the lines from the printing process. If you don’t paint, fill them in or sand everything smooth, you can still see them after the pouring. If you can zoom in on the. Lack mold or the bronze finished piece you can see them.

@arthasmenethil2201 2 жыл бұрын

When I saw that kind of thread on a bolt I wondered "What if a nut has it?" Now I know, thanks.

@Ethercloud Жыл бұрын

Very impressed how clean the detail came out of the mold.

@wuzi7049 2 жыл бұрын

those things glide! it's so satisfying

@DJ-sn2wn 2 жыл бұрын

At first I was confused why there would be layer lines in a metal casting then I remembered you casted it from the 3d printed model. That's a damn good cast!

@Khronosian 2 жыл бұрын

Absolutely amazing! Might I suggest, in future, using vibration during the ceramic dipping, perhaps on future models with fine details? Applying a "neck massager" to that sprue funnel would certainly dislodge any errant air bubbles Source: Former foundryman

@MurderWho 2 жыл бұрын

Ah, I see, giving him another way to use his wife's things!

@aryaaswale7316 2 жыл бұрын

Lolz

@charlz-darvin 2 жыл бұрын

@@MurderWho LOL, you made me laugh loud

@fancyfox5847 2 жыл бұрын

Or maybe she could get one of those paint shaking machines

@youvebeenspooked 2 жыл бұрын

@@fancyfox5847 u shud see wat my wief duz w a saws all bruh

@stevencooper2464 2 жыл бұрын

You, sir, are a creative genius, and I am very thankful you're not also a mad scientist. Excellent presentation, and work!

@corystowell123 2 жыл бұрын

I like the layer lines! It almost has a machined or brushed look.. great video!

@KrakenCasting 2 жыл бұрын

Those turned out gorgeous! I love when you can see print lines on a casting. It really shows how detailed a casting is.

@ianian4162 2 жыл бұрын

They're so...beautiful. I never imagined that something like this might turn out looking like a work of art.

@pjbscript 8 ай бұрын

Just discovering these vids in 2023! Really captivating, and reminded me of shop class in junior high where I had a somewhat visionary teacher that hooked us all in. Thanks!

@arthurmarshall703 2 жыл бұрын

Unbelievably satisfying

@michal_king478 2 жыл бұрын

man that looks amazing. The method for the molds is by far the best Ive ever seen. I love how it retained so much detail that the layer lines were visible. Looks totally like it was printed with metal

@intellectualiconoclasm3264 2 жыл бұрын

I have to say that it warms my heart when someone gives a proper attribution to someone for their creation. Well done and good on you.

@Eroc556 Жыл бұрын

That is the coolest thing Ive seen man! The detail in those castings blew me away! Thanks for taking us along on these projects!

@arenio 2 жыл бұрын

beautiful casting work

@Joe_Mama_7 2 жыл бұрын

When you accidentally screw in the bolt in the wrong hole… And then it just keeps tightening as you try to loosen it

@Creature0022 2 жыл бұрын

Or you screw it in the right hole and it keeps loosening at you try to tighten it

@Kevin-id5hx 2 жыл бұрын

Ya I dont get the point this thing is completely worthless

@MrWhateva10 2 жыл бұрын

@@Kevin-id5hx Correct. It's a novelty item, but it's still awesome. Bit like saying music is worthless because it can't fasten lumber effectively.

@AsherBarkin 2 жыл бұрын

If you put one end on a swivel it can be used for a really nice strut type of thing

@trejkaz 2 жыл бұрын

@@MrWhateva10 It's more like making a bolt out of chocolate and then saying that it's worthless because it can't fasten lumber effectively.

@sephirothbahamut245 2 жыл бұрын

Ambient temperature: 100+ degrees Me: "What the fuck?" Him: "fahrenheit" Me: "Ahhhhh ok"

@sawyerstephens8251 2 жыл бұрын

That’s still really hot though

@jasonjr2500 2 жыл бұрын

@@sawyerstephens8251 not around the south thats nothing

@DrB1900 2 жыл бұрын

@@jasonjr2500 Yeah, now if it is actually 100 C outside, then you'll get Alabama's attention. :)

@paulweston8184 2 жыл бұрын

@@DrB1900 110 F in Arizona. Can cook an egg on the asphalt but not hot enough to boil water.

@baconapo3990 2 жыл бұрын

@@paulweston8184 no shit

@darrenstettner5381 2 жыл бұрын

I think the layer lines are cool. I’m impressed they were visible in the casting.

@albind8622 2 жыл бұрын

Those screws are really cool! Your casting is amazing!

@djpenner34 2 жыл бұрын

Props to you! I think you're the first person I've seen actually give Oleg the credit he deserves! 👏

@SomeoneCommenting 2 жыл бұрын

8:00 Don't you love how that amazing pure bright yellow looks to the camera?

@usernotseen4911 2 жыл бұрын

the forbidden egg

@walterhambrick8705 2 жыл бұрын

That was a lot of work. Facinating.

@benjaminspencerrivera5973 2 жыл бұрын

I love your "how its made" style production and voice over. Got yourself a subscriber.

@peteragurkis3590 2 жыл бұрын

Wow. I never would've believed you could cast something that finely with insanely minimal hand work as far as casting goes. Great job dude.also impressed that the tolerance on each cast was so perfect that even the different shrinkage rates between the two metals didn't matter

@supertramp6011 2 жыл бұрын

Perfect for those who missed the ‘ righty tighty,lefty loosey’ class. Very impressive project,thanks for posting this video.

@bostonstock3315 2 жыл бұрын

incredible work, incredible artistry! incredible!

@kencarp57 2 жыл бұрын

This vid popped up in my feed. It’s easily the COOLEST one I’ve seen in quite some time, and it earned you a new sub. Well done!

@jeffreygrose9971 2 жыл бұрын

The layer lines on the metal look absolutely insane!!! I love this project and the detail of these castings are far beyond what I’ve ever thought was possible

@DONKINDONUTS 2 жыл бұрын

The way he talks and the cadence he speaks in is so consistent it almost sounds like text-to-speak.

@allenmoore5211 2 жыл бұрын

Nice work. I took Metal shop in High School and was able to do a few casting projects but takes it to new level.

@AutoBodyEverything 2 жыл бұрын

I seen two of your bi directional nuts n bolts, very gratifying to watch and pleasing. I love the craftsmanship.

@meredithv3168 2 жыл бұрын

This was one of the absolute coolest videos I've seen in a long time. An awesome project in and of itself, amazing craftsmanship, well detailed and explained. This sole video has sold me on your work and your channel. Absolutely magnificent stuff, well well done.

@robinson-foundry 2 жыл бұрын

Thank you! I appreciate it!

@johnnycage8952 2 жыл бұрын

@@robinson-foundry Will you be selling these online?

@magnussorensen2565 2 жыл бұрын

When I saw the movement at 11:40. I thought it would be cool to use that to create a vice with double moving chucks.

@tonyravioli1982 2 жыл бұрын

It would, not sure it would be that useful though.

@Martink9191 2 жыл бұрын

Thets why right and left hand thread are made....

@jesteronetime 2 жыл бұрын

kzfaq.info/get/bejne/h6iVgsp42cXTh4k.html

@LockDock666 2 жыл бұрын

you could make a vice like this, but since each jaw would always stay on it's according half of the main shaft, it makes no sense to make the shaft double-side threaded. just do one half of it left-sided and the other half right-sided.

@jdmccorful Жыл бұрын

Clever work and wonderful skill!Enjoyed watching.

@ProMediaLLC 2 жыл бұрын

Absolutely fascinating. Well done!

@baylinkdashyt 2 жыл бұрын

I love how you've read your audience: it is not necessary to say "don't try this at home, you might set *everything* on fire, including yourself". :-)

@rahulpagariya1 2 жыл бұрын

9:53 most loveliest gesture I've seen in a while.

@LucaBlightOfHighland 2 жыл бұрын

They would make great for decorating a nice office desk, good job.

@maryannrurup353 Жыл бұрын

Really neat and fun watching it goes up and down. thanks

@andreipendle1778 2 жыл бұрын

These castings have such amazing fidelity, I'm blown away! Keep them coming man.

@yngveellingsen3471 2 жыл бұрын

This is probably the coolest casting video I've ever seen. Great work!

@paulbensel2918 Жыл бұрын

Great video on shell casting , absolutely recommend it if you want to know something about this topic, thanks for sharing all the info

@mwaqaspro 2 жыл бұрын

A lot of work for just one video. Really Nice Work.

@RevengeAvenger 2 жыл бұрын

I absolutely love the layer lines in the castings. It adds a lot of depth and a rustic quality. Really awesome channel! 👍

@Actinuon 2 жыл бұрын

Wow, I've never seen the ceramic process before. That's crazy awesome!

@Boop__Doop 2 жыл бұрын

Finally an answer for the question i have been asking myself for a long time

@SaltineChips 2 жыл бұрын

"This scene is for my wife, it drives her crazy when I use her Pyrex for my projects." My, aren't you brave.

@jaymethodus3421 2 жыл бұрын

Pretty sure he meant that in a different way lol

@billyp.3128 2 жыл бұрын

When you make casts so clean that even the layers from the 3-D printed plastic show up in the end result! Amazing job

@apocalypticbean 2 жыл бұрын

this is amazing. Love seeing the whole metal casting process.

@TomsChevelle 2 жыл бұрын

Wow... love the video, you are a craftsman!

@1dayinhell 2 жыл бұрын

the sound of the metal nuts and screws is satisfying

@soorajmz 2 жыл бұрын

I'm not even into any of this but I enjoyed every second of this video, and I must appreciate your narration as well, good job and all the best

@Ryansanders80 2 жыл бұрын

"What kind of bolt doesn't have something to hold on to?" *carriage bolt enters chat*

@Critical_Stinking 2 жыл бұрын

Yeah but they have the square section at the top of the shank that bites

@rogercoulombe3613 2 жыл бұрын

@@Critical_Stinking Bites in theory. unreliable in practice.

@Ryansanders80 2 жыл бұрын

@@Critical_Stinking yeah, when i was little I was always so confused, then I worked with them

@matthewmitchell6001 2 жыл бұрын

Hahaha, classic carriage bolt punchline

@harrymu148 2 жыл бұрын

well yes but actually no but then in practice, yes but on paper, no.

@diRecTorUNBEKNOWNST 2 жыл бұрын

Simply amazing Thank you

@FlyingSparrow001 2 жыл бұрын

So satisfying watching the nuts work, love the work!

@erhon5 2 жыл бұрын

That ceramic shell stuff is really interesting and that looks like a really cool project!

@r7kelley553 2 жыл бұрын

The layer lines in the threads are one of my favorite parts.

@simplyed9482 Жыл бұрын

All your work is flawless and thoroughly enjoyable bro

@brahmburgers 2 жыл бұрын

Thanks for the video. I'm mega impressed!

@ProtoPropski 2 жыл бұрын

I know the name's already set, but these babies look like Dragon Scales, so I think my pet name for them are Dragon Bolts

@TacticalDimples 2 жыл бұрын

They look like pineapples for me so I’ll name them pineapple threads.

@localdude2979 2 жыл бұрын

@@TacticalDimples yeah Pineple Threads sounds legit

@patrickancona1193 2 жыл бұрын

I’m going with worthless waste of time & materials bolt

@pajolee6918 2 жыл бұрын

@@patrickancona1193 Funny, that's the name I was going to pick for you! 🤔

@rossclutterbuck1060 2 жыл бұрын

Pineapple Dragons or Dragon Pineapples

@vasumanthnarisetty1608 2 жыл бұрын

"this scene is for my wife" Yes king, cast away 😭♥️

@Donald6309 2 жыл бұрын

That was so satisfying to watch. I wanna make a herb grinder like these

@smithy2170 2 жыл бұрын

Wow, you did a great job!

@immolationangel4124 2 жыл бұрын

I accidently made one of these on a CNC one day when there was a M04 in my program's thread finish pass instead of an M03. (M03 is spindle forward, M04 is spindle reverse)

@ricomock2 2 жыл бұрын

Programming threading cycles manually? Why not just run a threading canned cycle and designate a spring pass to finish up?

@plumbherhub1664 2 жыл бұрын

Yep I just use my old pipe threader hand crank and old engine oils. Aint no cnc or what have you. Solder and taps and dies

@immolationangel4124 2 жыл бұрын

@@ricomock2 We use G32s for threading in 95% of our programs, it has its useful quirks for our applications. We have a separate, optional rethread for taking a finish pass which is ordinarily block deleted. It was in the optional rethread where the error was. I'm neither the programmer, nor do I even know if you can use a canned cycle for a g32, I've never seen it done. Our CAD software writes it out longhand, which, as far as I know, is the only way to use a G32. I may just be in an absolute paradise of blissful ignorance though.

@SabreMetalPanzer 2 жыл бұрын

When you started playing around with spreading the nuts to turn the bolt at 1:47, ideas started popping into my head for a super-low profile scissor jack... Hmmmmmmmmm...

@vincentkoenst913 2 жыл бұрын

Awesome idea

@benjaminchen4367 2 жыл бұрын

How would it be different than a scissor jack with a normal bolt? Seems like it would be worse

@ChronicSkooma 2 жыл бұрын

@@benjaminchen4367 and harder to replace.

@jeremiahvires7864 2 жыл бұрын

Hehehe spreading the nuts

@BE-dj6cp 2 жыл бұрын

@@benjaminchen4367 only one threaded nut on a typical scissor jack and the other end won't move linearly (can only rotate) so that friction keeps the bolt from spinning when under weight. A double threaded bolt could be shorter and get the double the vertical lift per rotation but it would take twice as much torque and some kind of brake or lock would need to be added to keep it from spinning freely under weight.

@takingtimeaway 2 жыл бұрын

You did a fine job sir. That is some clean work 👌

@allanwagner4570 2 жыл бұрын

Dude Those are the coolest fidget toys ever!!

@krounmusic 2 жыл бұрын

Great job! That was so controlled.. i feel like everybody always makes a mess when casting metal 😂 the result is great as well!

@Bourinos02 2 жыл бұрын

Damn, that casting indeed keeps insane details!

@samirving638 2 жыл бұрын

This was so cool to watch I enjoyed it soooo much

@proximap2151 2 жыл бұрын

They turned out great! Never seen this before! very cool!

@James-gd3sp 2 жыл бұрын

The layer lines makes this 100x cooler. It looks like you 3d printed from metal and is awesome.

@JadeDragon407 2 жыл бұрын

That process was neat to watch. Pretty wild concept; I have to wonder how well they stay tight since there's less tension surface between the nut and bolt, but the coolness factor is way out there. The bolts look covered in some pretty fierce dragon scales. ;-)