Making a CAT 3126 Bus Engine Think Like a Powerstroke |
Рет қаралды 394,329
Күн бұрынWhat does it take to make a 7.2 CAT 3126 diesel work in an OBS F350?
Subscribe to @DGHD | Merch: debossgarage.com/merch
Watch more episodes of this build: debossgarage.com/build/f-tree...
Thanks to our partners & sponsors for making this happen!
@toyotires @toyotirescanada
@FASSFuelSystems
@FlexaliteCooling
@TotalSeal
Xcalliber Transmission xcalliber.com
Northtown Machine / therealnorthtownmachine
Rust-Oleum Canada www.rustoleum.ca/
V&R Recycling www.vandrrecycling.com/
#princessauto
TOOLS & PARTS USED - Find the best prices using our affiliate links:
@WD40Specialist Degreaser geni.us/wd40degreaser
CSF 6.0 Intercooler geni.us/60intercooler
@FlexaliteCooling Radiator geni.us/60radiator
7000 lb Scales geni.us/hDF96J2
Casters geni.us/casters #princessauto
Parker Inline Filter geni.us/parkerfilter
@AdeptApe recommended filter ifskit.com/our-products
@FASSFuelSystems Lift Pump geni.us/ts-f14-140g
Sockets geni.us/propoint-impacts
@TotalSeal geni.us/totalseal
Total Seal Lubricant geni.us/ts-lubricants
Clevite Bearing Guard geni.us/clevite77
Clevite Cam Guard geni.us/cleviteCL400
37x12.5xR17 Tires www.toyotires.com/product/ope...
0:00 Coming up
1:32 Making a bus engine think like a Powerstroke
3:38 Flex-A-Lite 6.0 radiator
5:54 Exhaust manifold & turbo assembly
7:45 Routing the wiring & gauges
11:08 CSF 6.0 Intercooler
12:12 Engine ready to mount
14:23 Box removal
17:09 Engine disconnect & cab removal
19:12 Ready to pull the cab
23:11 Weighing in with the 460 gas
24:07 Fitting the engine under the cab
27:52 Princess Auto
29:32 Prepping the frame
Follow us:
debossgarage.com
/ debossgarage
/ blackjackdeboss
/ debossgarage
/ debossgarage
Send stuff to Filthy Rich
411 Darling Rd, Canfield, ON Canada N0A 1C0
Merch, Tape Boss & Car Parts: debossgarage.com/store
Tools I use: www.amazon.com/shop/debossgarage
Show us your build project: debossgarage.com/nation
Help us make awesome stuff: debossgarage.com/membership
Watch More Deboss Garage:
bit.ly/DG_EngineSwaps
bit.ly/DG_AutoShows
bit.ly/DG_Reviews
bit.ly/DG_HowTos
bit.ly/DG_QuickTips
About:
From American Muscle to Classics to Diesels, DG will show you how to build, swap, and repair anything with a throttle.
*If the video was helpful, please give it a "thumbs up" and consider subscribing.*
Theme Song: "Travelin'" by SWIB ( / swib-1 ) CC BY-SA 3.0
All Songs: / deboss-tunes
Music License: share.epidemicsound.com/deboss (30-day free trial)
© Red Egg Entertainment | made in Canada
--
NO WARRANTIES: All of the information provided in this video is provided "AS-IS" and with NO WARRANTIES. No express or implied warranties of any type, including for example implied warranties of merchantability or fitness for a particular purpose, are made with respect to the information, or any use of the information, in this video. DEBOSS GARAGE ("DG") makes no representations and extends no warranties of any type as to the accuracy or completeness of any information or content of this video.
DISCLAIMER OF LIABILITY: DG specifically DISCLAIMS LIABILITY FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES and assumes no responsibility or liability for any loss or damage suffered by any person as a result of the use or misuse of any of the information or content in this video. DG recommends safe practices when working with power tools, automotive lifts, lifting tools, jack stands, electrical equipment, blunt instruments, chemicals, lubricants, or any other tools or equipment seen or implied in this video. DG assumes or undertakes NO LIABILITY for any loss or damage suffered as a result of the use, misuse or reliance on the information and content of this video.
USE AT YOUR OWN RISK: This video is for informational purposes only. It is your responsibility to evaluate your own safety and physical condition, or that of your clients, and to independently determine whether to perform, use or adapt any of the information or content in this video. Any automotive repair and/or modification may result in injury. By voluntarily undertaking any task displayed in this video, you assume the risk of any resulting injury; your safety is the sole responsibility of the user and not DG.
@DEBOSSGARAGE 3 жыл бұрын
Alright guys, we're so close. SO CLOSE to 500k and an epic video to go along with that milestone. Let's do it! Less than 4000 subscribers to go and we'll resurrect the Cummins powered flamethrower. 🔥
@justinandersob5534 3 жыл бұрын
If that fails again what about taking the cummins an making a 🎃 throwing machine i can't remember the name but they spin up to so many rpms an throw a pumpkin. That be cool to see you build an get a record.
@DEBOSSGARAGE 3 жыл бұрын
More like 3.0 at this point...
@lambrokedrc5998 3 жыл бұрын
I could use an engine and trans for my '70 Ford $$$??? THNX!
@ChiodoDragon2 3 жыл бұрын
I guess you need another run-away 2-stroke to get another shot in your proverbial subscription arm. I've been watching since you had around 50K and have enjoyed seeing you grow your channel.
@calholli 3 жыл бұрын
You should spend the extra cash and put stainless bolts on the exhaust-- you'll be so happy you did later on.
@bvward 3 жыл бұрын
You failed to mention that the purpose of this swap is so you can rev the engine and the kids will think the school bus is early...
@baileyhatfield4273 3 жыл бұрын
Gotta have some brakes which make a bunch of noise though. And a bunch of metal clinging around lol.
@TheFoMoCo1903 3 жыл бұрын
A 7.3 psd would make that bus sound as well
@darknightinlight4201 3 жыл бұрын
Lmao you think this heifer is gonna sound like a school bus when it’s done😂😂☠️ nah hell nah
@PremiumFuelOnly 3 жыл бұрын
Technically some older school busses used the 7.3 motor so it would sound like a bus either way depending on what they used in that area.
@andyhayes7756 3 жыл бұрын
Your wearing a Welker Farms shirt. Just watched Welker Farms last night and they had your shirt on....smooth shout outs!
@MD-ob1gq 3 жыл бұрын
Doesn't quite fill it out like LegArms. Thought those were supposed to be muscle shirts, not Canadian Beer Shirts! 😆
@bumpkinrocks 3 жыл бұрын
Your neighbour looked like he was having an amazing time👍🤣
@jamesbaylis9438 3 жыл бұрын
Not all of us have a Twin Turbo AWD Audi to do donuts with. The man's working with what he's got.🤣
@thesillyhatday 3 жыл бұрын
Can't wait for dementia
@AdeptApe 3 жыл бұрын
A C-15 would look really good in that Ford, might need a hood scoop though to get the hood to close.
@danieledick2678 3 жыл бұрын
Nah, C32...go big or go home!
@aceinternational4788 3 жыл бұрын
Nah 3126 perfect
@shane3862 3 жыл бұрын
I second a 6nz
@aceinternational4788 3 жыл бұрын
@Fummins my future is to swap in a 8.3 6ct Cummins into a 5500 ram medium duty
@mitchel71 3 жыл бұрын
@@aceinternational4788 8.3s are leak monsters, tons of them available labeled as paccars though, and they are fairly reliable. I've had tons in the shop that only had one or two oil changes go over 400,000 km. I'd say try to find an x12. Those things are beautiful, tons of power, great on fuel.
@wolfwolf7246 3 жыл бұрын
"l drilled a hole in the wrong spot"😂😂.you done great.
@chipanzee7507 3 жыл бұрын
It really is amazing to watch Rich at work...the things this man's brain comes up with is insane.
@MrJeepmarine 3 жыл бұрын
I would be sooo overwhelmed, I almost get anxiety watching his builds, but I know he'll figure it out.
@Clean97gti 3 жыл бұрын
Dude probably could have been a mechanical engineer.
@upnorth5465 3 жыл бұрын
When he grabbed that nut with his fingers and took it out with that impact I was at a loss for words. That is something straight out of a fairytale! Haha You wouldn't get that finger back if you did that around here.
@SamCyanide 3 жыл бұрын
big respect to whoever picks the music (Aaron?) - it's refreshing and good. I don't hear it on any other channels either!
@craighearn747 2 жыл бұрын
I concur.
@MrSlapdash243 3 жыл бұрын
Tastefully done glove product placement there.
@MrSlapdash243 3 жыл бұрын
I also for some inexplicable reason feel the need to go out and buy a tape boss.
@jesserousseau2481 3 жыл бұрын
So many womtnget the joy us northern guys have working on southern vehicles. The shit we work on hear omg!!! Swiss chesse
@HotForgeChaos 3 жыл бұрын
13:15 you can just hear Peg saying "Oh she's just fuckin' loyal"
@haydona1845 3 жыл бұрын
Man I love how they all use each others phrases
@LongPeter 3 жыл бұрын
Wow! Princess Auto actually has a range of interesting stuff! And in stock! Take note SuperCheap Auto. You need this, not tyre shine in every fking aisle.
@yeahitskimmel 3 жыл бұрын
You should visit a US parts store although the average ppl working the counter are the real star of the show lol
@crezychameau 3 жыл бұрын
oh man. You should see the joke that auto stores are here in france. Supercheap autos look like Ali baba's cavern in comparison
@chadalcock7275 3 жыл бұрын
@@yeahitskimmel Depends on the parts store. Some of the people behind the counter couldn't be more clueless.
@jamesb.9155 3 жыл бұрын
UNBELIEVABLE! . . amount of work time, expertise and $$$ !
@koreywilliams4570 3 жыл бұрын
Deuce and a half would be badass. Ive always wanted one with the covered bed and fold down seats, and the multi fuel engine, and the big ass winch. Those things are sooo awesome.
@Nunya_Bidnez 3 жыл бұрын
When I saw the Kitty power in the thumbnail I was like...... O HELL YEA. I gotta see this one. Ive seen tractor fords but nothing like this. Lets go my dudes
@jeffcomer8317 3 жыл бұрын
Thats bad ass! That ford should b a powerhouse.
@ck7802 3 жыл бұрын
Listen. For the next video can we just have an extended cut of you harassing a duck? I thoroughly enjoyed that.
@kiiiisu 3 жыл бұрын
lol :D..........but i want also
@JU57US 3 жыл бұрын
"It's public property, I can videotape if I want!"
@bigred1247 3 жыл бұрын
Rich like all us canadians know if it was a goose make sure you got your runners on and had your weetabix
@NickLandsberg780 3 жыл бұрын
That was hilarious! I CAN VIDEO TAPE YOU IF I WANT! Awesome
@acemobile9806 3 жыл бұрын
Rich keep the vacuum climate controls unless you're just looking to go full modern because they are so simple to diagnose & repair. Use the electric vacuum pump & reservoir from a Super Duty, should be a dime a dozen in any junkyard there. Loving this build 😍 she's gonna be a ripper!
@rustyshakleford5230 3 жыл бұрын
Capitiller makes ford go vroom! I like it.
@fonhollohan2908 2 жыл бұрын
wow that frame is just mint. You definitely scored on that one.
@Tom-jl4uf 3 жыл бұрын
Love how stoked Rich is to find non rusty bolts
@CRAPO2011 3 жыл бұрын
Deboss doing it like a boss, i like this Ford
@denisewebb 2 жыл бұрын
Wow, great video. Thank you for recording.
@CarswithNash 3 жыл бұрын
Only a crazy person could dislike this build! I am confident this truck is going to be better than new when you’re done with it Rich! Truly jealous of how well your duck cooperates for the camera, I can’t get my dog to look at the camera to save my life!🤣
@ashtonmariefranklin725 3 жыл бұрын
Get a 7.3L rad support. It's different then the gas rad support. And should hold the intercooler nicely too
@abpsd73 3 жыл бұрын
Yup, it will support the lower part of the radiator as well without having to be hacked to fit the taller radiator.
@MadScientistGarage 3 жыл бұрын
Seems like just yesterday you picked this thing up and stopped by! If I'm lucky I'll have my car redone around the same time your truck is!
@chevymontmarlo 3 жыл бұрын
Nice glad to see the ford back, hopefully you can do something with the old motor
@DEBOSSGARAGE 3 жыл бұрын
Already in the back of another truck
@jamesbaylis9438 3 жыл бұрын
@@DEBOSSGARAGE you should give Junkyard Digs a call, he loves old Fords 😋
@chevymontmarlo 3 жыл бұрын
@@DEBOSSGARAGE ah
@divadyrdnal 3 жыл бұрын
You have to love this series no matter what “hat” you wear... Great content Rich!
@brandonfloyd6321 3 жыл бұрын
97 ford superduty (10lug f450) had hydroboost. Only obs ford that had it for when you're hunting parts for hydroboost conversion.
@acemobile9806 3 жыл бұрын
Good luck finding one. I let the very last new one anywhere slip thru my stupid fingers @ a Ford dealer in Amarillo on an eBay auction almost 2 years ago. Haven't seen one since.
@brandonfloyd6321 3 жыл бұрын
@@acemobile9806 people said you can on rockauto. Idk. Lol my buddy that has a junkyard scrapped a couple when he cleaned out to start fresh.
@Nunya_Bidnez 3 жыл бұрын
Ahh yes. The old razor removal trick. Pro tip. Some windex will make it work much better. Try it. Looking at that birds nest of wires had me worried. That trans looks like a monster. i love it. Your obviously Canadian. Im in Michigan and I will send my love to our favorite neighbors. O Canada we stand on guard for the our most trusted friends.
@shanebist 3 жыл бұрын
You build some of the coolest stuff on KZfaq, keep up the great work Rich!
@DEBOSSGARAGE 3 жыл бұрын
Thanks. much appreciated
@Duckinator0317 3 жыл бұрын
Thumbs up for the Duck
@josephpaul7217 3 жыл бұрын
High quality content, i don't mind waiting for these vids as they rarely disappoint. 👍 Love how much engineering you figure out on your own.
@alexandersyed5570 3 жыл бұрын
I have been waiting for this build for so long!!!! I’m excited to finally see the CAT go into the truck! Super hyped rich!! Stay Philthy
@craighearn747 2 жыл бұрын
Only the bravest among us would start this project.
@yeahitskimmel 3 жыл бұрын
I forgot about the Tree Kitty's interior swap, super cool surprise to see it again!! From MI never seen a KZfaq flex quite as hard as that finger tighten nut/bolt stunt
@thats10guy91 3 жыл бұрын
RICH, could you use a banjo bolt on the fuel return? Might cut the length of that fitting in half. I know big diesels like an ISX15 use big banjos or even a hydraulic fitting might work. P.S. not surprised that you are a man of your word, noticed the gloves 👍
@TASTYTREATSPLS 3 жыл бұрын
Love the amount of work that is shown per video.
@morrow.m 3 жыл бұрын
This editing and music is on point!!! 2️⃣👍⬆️
@yesno.idontknow.587 3 жыл бұрын
Or Mintttt as we would say
@redlock4004 3 жыл бұрын
Holy crap man, you put in a "F" of a lot of work into these projects. You have more energy than me, by far :)
@DEBOSSGARAGE 3 жыл бұрын
Nice that it gets noticed. Its great getting to build it the way I would want it to be done.
@yeahitskimmel 3 жыл бұрын
@@DEBOSSGARAGE I know there was considerable forethought involved but this would been 5 vids over a month uploaded by anybody else with a shop full of people.
@baileyhatfield4273 3 жыл бұрын
@@yeahitskimmel Possibly more episodes, and you would get 2 min previews of each but not the full ones. And they don't do great work. Rich here does good work, and builds very nice buids. And teaches us all at the same time so.
@MrDaChicken 3 жыл бұрын
@@DEBOSSGARAGE That's actually a big thing, that. Because if you had to justify it to a loans officer, as needed for your business, well..... So it's awesome that this KZfaq thing lets you use all the good stuff. We all know what happens at this stage of the project. You are already over budget. It still doesn't run. The wife is giving you the look. Shortcuts get taken. Not a chance in hell this truck will make sense per dollar invested, any more than any other project. But it WILL be awesome. ( ** Allowing for any reasonable dollar value to be inserted for Rich's shop rate. 8000 lbs of awesome. 8000 hours of labour. :) ) Now.. There needs to be a heavy hauler one ton pick up built. Must include at least a pusher axle, preferably two drive axles. And a Jacobs Engine Brake. A loud one...... For that camper/toy hauler fifth wheel you've been eyeing.
@williammoore8129 3 жыл бұрын
We need... MOREEEEEEEE!
@UplandAndOverland 2 жыл бұрын
Classic instruments, my boy in boyne!
@SPUDHOME Жыл бұрын
Exhaust studs, with brass nuts, we used them in stock care racing, worked great to remove headers, in engine refresh, rebuilds.
@nelsonsturgeon7529 2 жыл бұрын
I love what you are doing for the F-350. I have the same truck with a 7.3 power stroke. But would really love to put in a Caterpillar, Or even a Cummins with a Alison trans. Can't wait to see it Done.
@canttanethisxx 3 жыл бұрын
Can't wait to see this thing fire up in the truck, been wanting to drop a cat in my f250
@ElkinsEric 3 жыл бұрын
I’ve had really good luck with SEM Rust Shield epoxy primer. Scuffed the old paint, applied the SEM, and covered it with some Rustoleum black. Not a speck of rust on my Jeeps frame and WV uses tons of salt in winter. I’m 100% happy and super impressed with the results 8 years later
@abpsd73 3 жыл бұрын
7.3 in the super duty was intercooled, OBS didn't have an intercooler, but one can be stuffed in. Early 7.3 SD had all aluminum intercooler. You should get a OBS diesel rad support, it sits deeper between the frame rails to support the bottom of the radiator, and won't block the rad fins like the gas support would. When you re-install the bed, buy Ford bolt kit XC3Z-9900038-AA for a Superduty, it has torx head bolts and j-nuts to make future bed removal easier. I gave away a 460 to replace it with a 7.3
@WBOS72 3 жыл бұрын
Thanks for the update Rich - looking forward to more.
@Rithius3485 3 жыл бұрын
Deboss!! So close to 500K!!!
@jacobmorton4940 3 жыл бұрын
He needs his own tv show on discovery
@DEBOSSGARAGE 3 жыл бұрын
we turned them down multiple times. They wanted me to build 13 cars in one season.
@BigPawTivald 2 жыл бұрын
DT466, CAT C7/C9 were always my dream swaps (I do love the 6v53/71 swaps too), this is a great option too. Awesome stuff.
@eligreen9301 3 жыл бұрын
Bar and chain oil cut with a little diesel fuel makes good undercoat. It will come off over time but can be sprayed from a garden sprayer so reapplication is easy.
@jonstrande2074 3 жыл бұрын
Ive been waiting for this build. This is a great moment.
@CLUBCARLIFTED666 3 жыл бұрын
You Canadians are mint.
@guyforlogos 3 жыл бұрын
Oh..... the rusty bolt issue :) I feel your pain Rich, I’m in Minnesota and have the same problem. I have been bringing cars back from California and Texas since 2007 when I brought an 85 IROC Z back and took the fender off, loosened the bolt with a socket and unscrewed it with my finger the rest of the way! I’ll never buy anything from the Midwest again! Luckily I have family in those two states and Arizona too!
@mikekotarba5828 3 жыл бұрын
Nice technical information. Thank you
@willkerfoot2127 3 жыл бұрын
The only piece of trim that is missing is the Ford logo, so I bet he did that instead of censoring it and he probably has the footage somewhere of him ripping it off
@ivanfromtheeast4709 3 жыл бұрын
I don’t think you have to censor on youtube
@joshuasmonk 3 жыл бұрын
It’s going to be such a nice truck I’m so jealous!
@tterrag1987 2 жыл бұрын
Senile? More like genius. I can hear the belts squeezing from here.
@idrive1265 3 жыл бұрын
This video actually really helps im doing a cab swap on my 88 with the 460 now i know what all to disconnect
@mattsfirewoodvideos738 3 жыл бұрын
I'm loving this build looking forward to seeing it come to fruition
@warmstrong5612 3 жыл бұрын
F-TreeDucky, Kitty got competition.
@Beandiptheredneck 3 жыл бұрын
I don't think anyone is going to get bent up over pulling the 460, everyone knows they are smog dogs and the caterpillar is going to be pure awesome. To me its cooler to see a custom built truck or car than a factory survivor
@DEBOSSGARAGE 3 жыл бұрын
My thoughts exactly.
@richardturner8630 3 жыл бұрын
Just a good seasoned casting. Same as a motor home 440
@peterhatch1583 2 жыл бұрын
Just a great build
@Daermos 3 жыл бұрын
Not only do I love Ford but I also love cat! Can't wait to see this rolling
@DaveBenson 3 жыл бұрын
Epic as always
@shadetreejoe3986 3 жыл бұрын
I'm really enjoying this build. It's great to see the progress you're making.
@cyprianzollinger303 3 жыл бұрын
Absolutely loving this project! Keep it up Rich!
@toddanderson9001 3 жыл бұрын
I live in Wisconsin and you can’t find a three year old truck here that looks that good!
@MrFredboy 3 жыл бұрын
Right?! Hell, here in the SW part of the state I’ve seen ‘19 and early ‘20 trucks with more rust come through the shop this winter! Wisconsin really stepped up on the brine and salt consumption both this winter too, though!
@MrFredboy 3 жыл бұрын
@@redrider7730 as long as you're a good bit inland from the coast. Granted, it takes about 100x as long on the coast to get surface rust as it does in the midwest to get full blown cancer holes, you will still get minor rust from sun breaking down the paint and saltwater evaporate intruding on bare metal.
@andytommykeddy3224 3 жыл бұрын
I love this project!
@nathaniellangston5130 3 жыл бұрын
OH MY GOODNESS!!! ITS COMING TOGETHER!!! WOO WOOOW!!!
@richardgroom988 3 жыл бұрын
I know nothing about building vehicles or diesel engines but I do enjoy your videos Thanks from Australia
@BBBoiko2004 3 жыл бұрын
Hell yeah brother ! It is nice to see that you use gloves :)
@growingknowledge 3 жыл бұрын
Loving your videos Rich, awesome project!
@gentilejoshsaved1646 3 жыл бұрын
That is a daunting task. You are good at focusing on the job at hand.
@brucelee64485 3 жыл бұрын
RICH!!! CAT man here!! I won't swear by it but I think that there is an alternate fuel out port on the cylinder head on the left side of the cylinder head at the back. It would be behind your new intake manifold and underneath where your breather tube is. I know that the later C-7 engines did but I'm pretty sure that the 3126 engines did too. It will be an o-ring face plug that will come out and go into the spot at the back of the head. Might be better than modifying the cab.
@DEBOSSGARAGE 3 жыл бұрын
Thanks! That's awesome and I will check it out
@_ohmz_electric 3 жыл бұрын
I’m rewatching these in anticipation for the new one
@hensleyshobbies-doug7761 3 жыл бұрын
Get it Rich, always cool watching you man, I learn a little something just about every time! 🤘✌🏻
@RedZoneZombie 3 жыл бұрын
I work in a diesel fuel shop down south, would love to see some more diesel fuel injection videos! Also, love your videos and can’t get enough of them! Keep up the fantastic work!
@austinjacknife9599 3 жыл бұрын
i had a 2005 cummins 2500 that i just had for shits and giggles, I ended up bed lining the entire truck cause the body wasn't in the best shape but i sold it not long after. the guy who bought it stripped the bed liner and was preparing to paint it and discovered a lot of rust spots that were starting to build up because of moisture, by all means im not a ford guy but i really love what you're doing with this truck man (PS i moved onto a vp44 24v cummins and a 95 12v cummins and i love both to each their own :) ) ALBERTA
@uncommonlogic1698 3 жыл бұрын
Silly goose, thinking it was a worm. Awesome documentation of a project
@jok3yjesu339 3 жыл бұрын
I like how you kept the air compressor on the engine maybe you can make a setup so you can connect air tools to it and or a air chuck to fill tires and stuff
@anargylewanderer8721 3 жыл бұрын
Have you thought of using an electric vacuum pump and reservoir out of a 6.0 era 250/350/Excursion to operate the HVAC controls?
@abpsd73 3 жыл бұрын
I was thinking the same thing, 99 and later super duty have the vacuum pump. 08 and later have electric actuators, I'm not sure what year that F150 dash is or what it would have (or if there will be any legroom.) I'd assume he is going to ditch the vacuum boost brakes and replace with hydroboost.
@r3dbeard 3 жыл бұрын
I need to put one of those on my ‘03 7.3 e-van, I hate the belt driven vacc pump.
@gethinjones1348 3 жыл бұрын
Awesome video Rich, this is such an interesting and amazing build! 👍🏻
@ridingwithlucas1745 3 жыл бұрын
Thank god I’ve been waiting on a update on this build
@joetaylor6497 3 жыл бұрын
He’s getting better with the gloves hooray
@mpgracing 3 жыл бұрын
It’s hard to do!
@Backyardmech1 3 жыл бұрын
That’s a sweet build. Being a neighbor in the great north I’d love to see an air starter on that hog. Never have to worry about the batteries getting tired of the cold.
@dylanfox7077 3 жыл бұрын
Love this channel
@DeadReckon 3 жыл бұрын
Nothing makes a Canadian happier than 30 year old bolts with no rust.
@michaelcuff5780 2 жыл бұрын
Every bb ford Ive had was a gutless gas pig. Now smallblocks, thats a whole different animal!
@Secretcircuits 3 жыл бұрын
POR-15!
@tashawegmueller1866 3 жыл бұрын
That Cat looks so good in that test fit cannot wait to see more
@CortJohnson 3 жыл бұрын
Amazing what these guys can do....
@CortJohnson 3 жыл бұрын
I have no idea what they're doing but it is gun watching
@yako0000 3 жыл бұрын
you have to take the duck to Timmies when you get the truck done!
@markdeartola1154 3 жыл бұрын
Finally my favorite build!!!!
@ptsdpegusus 3 жыл бұрын
So good to see this intro again
@kevinhill672 3 жыл бұрын
Nice job...I just pulled my body off of a 94 F350. Minimal rust but the body and bed mounts were toast. No rot on the Rad support/mount is lucky too. I found the shackle purchases on both sides ( rear ) were packed with grime and should be cleaned out too. Well done all around Rich, Can't wait for the next Video...Stay Philthy
@rgbrown90 3 жыл бұрын
My dad and his old race buddy used to run 460's in their pinto finest big block ever produced
@ronaldlindsey4822 3 жыл бұрын
POR 15 for the frame and body work. Stops rest and keeps it from returning. Might give it a try. Regardless... so sweet. Good luck in the build.
ТНТ4 Shorts
Рет қаралды 2,8 МЛН
QAZSPORT TV / ҚАЗСПОРТ TV
Рет қаралды 153 М.
I Do Cars
Рет қаралды 140 М.
Powerstroke Central
Рет қаралды 593 М.