Making a Storage Cabinet for a Metalworking Workbench/Welding Table

Рет қаралды 710,356

3 жыл бұрын

My Premier Project Plans: paskmakes.com/premier-project...
My Free Plans: paskmakes.com/free-plans/
Much needed storage for my metalwork shop!
The build video for the welding Table/workbench can be viewed here • Ultimate Welding Table...
As always I'm happy to answer any questions.
If you would like to support this channel you can do so here
/ paskmakes
You can also help me out by purchasing one of my shirts, you can find them here paskmakes.threadless.com
Check out my new website
paskmakes.com/
Check out my Instagram to see more of my work / paskmakes
Also you can check out my photography at my website (nothing to do with making but you may be interested in what I do) www.neilpaskinphotography.com
My email can be found in the about section of this channel.
For real mail,
Pask Makes
P.O BOX 768
Yandina
Queensland
4561
Australia

Пікірлер: 688

@zoegibson1557 Жыл бұрын

MUY buena calidad, el texto imagenes. kzfaq.infoUgkxbnOKZBE4evMO5V2vroHeCjq6d_MV6wJO Un manuel muy completo y trabajado. Resulta muy práctico. Para principiantes y profesionales. Lo recomiendo

@deeranfoxworthy6069 3 жыл бұрын

I love your little tricks to work smarter and not harder. Like even simple things of just putting some blocks under it to help it up onto the table.

@PaskMakes 3 жыл бұрын

Thanks Deeran! :)

@deeranfoxworthy6069 3 жыл бұрын

@@PaskMakes thank you! I have learned quite a few helpful tips and tricks from you!

@donsmith9081 Жыл бұрын

@@PaskMakes You are Amazing-making everything look easy! The void behind the drawers is perfect for putting long shelves for flat bar. I keep 3/8 on top then 1/4 under that all the way to 1/8. My table is 10 ft long and (flat bar) needs a continuous surface to rest on. Above that, on my wall I store 20 ft lengths of different type materials. Cheers!

@jam2190 3 жыл бұрын

That saw, cutting the steel, like wood!!! Bloody amazing!!!

@Vikingwerk 3 жыл бұрын

the trick is that the blades are hilariously expensive usually. My friend has a miter saw that is made for cutting steel, and the blades are about 70$ each, and it takes one careless cut to blow all the teeth off the blade. Great tools, but you absolutely have to respect their limitations, which is generally all about feed rate, not to slow, not to fast.

@PaskMakes 3 жыл бұрын

I thought so too! :)

@kenlewis6538 3 жыл бұрын

I usually blow the teeth off when cutting a thin strip off, the strip starts to vibrate and that's the end of the blade. You were lucky to get away with the trims you did.

@elainehiggins7544 3 жыл бұрын

@@kenlewis6538 Never having used such a saw to cut metal, I'm curious. Does using a straight edge to guide the cut help? Or does that not make a difference with respect to vibrating? Thanks.

@mjremy2605 2 жыл бұрын

@@Vikingwerk Very good tip and advice. Thank you!

@R.Craig.Collins 3 жыл бұрын

Your Zen like patience is a lesson for me, as are your designs, and I so enjoy theplanning through execution

@PaskMakes 3 жыл бұрын

Thanks very much! :)

@myharris 3 жыл бұрын

Fascinating watching a cabinet maker's approach to metalwork - really inventive little touches, like the wooden jig for welding the drawer front studs. I cannot think of a single one of Neil's videos I haven't learnt something from.

@PaskMakes 3 жыл бұрын

Glad you enjoyed it Jim! :)

@johnnydingo8680 3 жыл бұрын

Neil is a master craftsman in more ways than one

@c4call 2 жыл бұрын

And the drawer slide spacing jigs as well. I like it!

@zodiacr 3 жыл бұрын

Always click on Pask Makes! I especially love the courage and patience - courage to admit when Neil is wrong and patience to redo it in style!

@PaskMakes 3 жыл бұрын

Thank you! :)

@msmith2961 3 жыл бұрын

New drinking game - take a shot each time Pask makes or uses a jig :) Amazing finish, it's gonna weigh a bloody ton when full but solid as!

@daviT_con_T 3 жыл бұрын

i ll be drunk as hell

@sciangear4782 3 жыл бұрын

@@daviT_con_T I think the term is "paralytic" 🍻😂

@Zogg1281 3 жыл бұрын

I tried that once and had to have my stomach pumped!!! Maybe binge watching 6 months episodes in one sitting was a really, really bad idea 🤣😂🤣 That game should only be played when watching ONE episode 😁👍

@Jeffppuckett 3 жыл бұрын

As an American, I really really really needed this video this morning. Thank you for the brief escape

@vincentlemaire4680 3 жыл бұрын

at least, it's not a fake ... video !

@HaasGrotesk 3 жыл бұрын

It's ok. When Trump wins he'll make America great again.

@keithdelp3190 3 жыл бұрын

Election stress? Watch Neil make this table in the heat... surrounded, yet unfazed by myriad deadly insects, arachnids, serpents, and plants! And? HE DOES IT WEARING SHORTS! ;)

@Jeffppuckett 3 жыл бұрын

@@HaasGrotesk Guess we'll see

@Berqist 3 жыл бұрын

No doubt. No doubt.

@panedrop 3 жыл бұрын

I love it. You're so fortunate to be in a position to create the sort of things you do, and I like that you're moving up in scale.

@luckyrashes 3 жыл бұрын

'I predrilled for the self tapping screws.." we've all been there!

@user-nd3lx1zg9t 3 жыл бұрын

Those screws (we call them tec screws where I'm at) are designed to only go through sheet metal. That's a bit thick for those.

@CeeJayThe13th 3 жыл бұрын

Well, I mean they will start easier like that

@wearsjorge55 3 жыл бұрын

The self tappers he started with... got bad memories with those they're garbage and I just wanted to get rid of them

@matthewwilliams76 3 жыл бұрын

Self tapping and self drilling are totally different....

@tattooedredheadx 3 жыл бұрын

@@matthewwilliams76 Well said.

@negotiableaffections 3 жыл бұрын

I was sympathetic when I saw you struggling with the cut-off disc. Now I'm jealous of that incredible bench! That saw was an excellent purchase! Great work Neil!

@PaskMakes 3 жыл бұрын

Thanks Keith! :)

@reinholdu9909 3 жыл бұрын

@@PaskMakes YES. Me envious too. - This table deserves a plan on your website too !!!

@RaicoRosenberg 3 жыл бұрын

What model saw was it? Can't find it on Bosch website. Cheers!

@josedavid6400 9 ай бұрын

@@RaicoRosenberg did you find it ? I'm also curious about the blade. Thanks mate

@RaicoRosenberg 9 ай бұрын

@@josedavid6400 sorry never found it

@JamesManCave 3 жыл бұрын

Neil your dedication to nice looking and great functioning workshop furniture is fantastic, worth all the effort you put into making this bench! It look brilliant and just thing you said you need

@tasror 3 жыл бұрын

I love that there are chicken coop offcuts being used as risers when you're cutting up the metal :)

@PaskMakes 3 жыл бұрын

Well spotted! :)

@kleckerklotz9620 3 жыл бұрын

I do really like the way how you go about things. Always humble in mind, but no challenge too hard. *thumbs up*

@Bedevere 3 жыл бұрын

I applaud your use of spacers, templates and jigs to really get very accurate and professional looking results. Patience and skill can go a long way.

@funkyspacecow 3 жыл бұрын

Great video, as always! I love watching your approach, as a woodworker, to metal fabrication. As another long time woodworker that's just started playing with welding and other metal work I really appreciate seeing how you apply your experience designing and building in wood, to metal. Very inspirational!

@gc0009 3 жыл бұрын

your videos are so satisfying and relaxing to watch, you don't do things randomly, you follow steps, I love it.

@philgray4780 3 жыл бұрын

Neil , beautiful work, you make super square accurate work look so easy and effortless, which it is not, but an art in itself . that power saw has certainly got my juices flowing

@kingearwig 3 жыл бұрын

Put of all the makers I watch on KZfaq I think you are the one I admire most. You are building the same skill/tool set that I want.

@c.a.g.1977 3 жыл бұрын

You make it look so professional, yet easy! Great one, once again, Neil!

@trevorjarvis3021 3 жыл бұрын

Well, you certainly made a fantastic job of those drawers, absolutely unbelievable! Credit to you indeed.

@dr.skipkazarian5556 3 жыл бұрын

This particular project stands out most as a testament to your excellent design and craftsmanship (including its versatility) of your workbench. This is some very fine and well-thought work....best to you and be well.

@cav89- 3 жыл бұрын

Thank you thank you thank you!! Whenever I’m struggling with some projects, overthinking and overall mismanaging it, and watch a video of yours, old or new, feels like a full night of sleep and refreshing shower for my brain. All of a sudden, I feel like I can do it, and I do do it! I’m an amateur woodworker and started to do some welding a few months ago to add to my fabrication capabilities (and shop furnishing and tool making and modding 😆) and it was very nice when I saw that your recent videos were about metalworking! Keep on with your awesome work! Thanks again, and greetings all the way from Brasil!

@garrymiller6862 3 жыл бұрын

Absolute legend in my book ..! Just shows you don’t need every bit of new kit to produce master quality...!!! Love it 👍🏻

@barthanes1 3 жыл бұрын

You've made a lot of welders jealous. I can see them green with envy.

@giggidygiggidy4884 3 жыл бұрын

This has to be the most relaxed project I’ve ever seen you do. I like it.

@mandyleeson1 3 жыл бұрын

Fantastic result, Neil. I think the steel on the drawers looks great as it is. 🙏🏼

@tarfeef_4268 3 жыл бұрын

Ah, watching that metal get buffed/polished is so satisfying... looking good.

@vetramiga1 3 жыл бұрын

that mini dry cut saw is amazing

@RaicoRosenberg 3 жыл бұрын

What model is it? Can’t find it 🤔

@Denis-vk4vg 3 жыл бұрын

Just impressive... as always ! Thanks for the quality of your videos Neil 🙏

@thenuptse8827 3 жыл бұрын

That little jig for welding the bolts to drawer fronts was awesome 👍🏻

@Mitrasmit 3 жыл бұрын

It looks absolutely amazing. So professional.

@AdamIannazzone 3 жыл бұрын

It looks so clean! Really professionally done.

@MrCytree 3 жыл бұрын

Incredible work as always. This channel is one of my favourites. The quality of work and video is top-notch. Thank you for the content.

@das250250 3 жыл бұрын

Excellent bench , excellent tutorial explaining everything, no over talking , excellent method build process, safe workshop practice , perfect "bench"mark workshop video ...pun intended

@petergaiser4213 3 жыл бұрын

So enjoyable watching you work. You teach us patience and diligence. Bravo on this magnificent bench 👍👍👍🍾

@dpd16790 3 жыл бұрын

really love the color of the table.. makes it look like a factory made table from miller welding... the quality of the build lends a lot to it looking like a factory made table by miller too.. excellent job... im gonna build one myself...

@johnhughes3387 3 жыл бұрын

You are one of my favorite craftsman! I’ve gotten so many great ideas from you, too many to list. Keep up the great work and thank you for taking the time for us mere mortals. Always looking forward to your next video.

@PaskMakes 3 жыл бұрын

Thanks very much John! :)

@christianscustoms6429 3 жыл бұрын

I really like the angle iron handles, such a good idea and they look great!

@allenhunt3070 3 жыл бұрын

Wow, I never thought it would turn out so nice! The drawers turned out fantastic!

@ChristopherSalisburySalz 3 жыл бұрын

That little metal saw is amazing! Nice drawers!

@BuildSomthingCool 3 жыл бұрын

Nice table! I like to make a suggestion on the casters, use six. You'll find out that moves over the floor much easier especially if there's any imperfections in it. As a side note it's a guaranteed that if you use only four casters one of the one on the corner is going to blow out.LOL. Great video

@nabilfreeman 3 жыл бұрын

@Miguel Kyrie no one cares

@StamosTee 3 жыл бұрын

That came out fantastic !!! You really did a great job there. I really admire your skills 🤜🤛

@petermarsh4993 Жыл бұрын

Dear Neil, you’ve made a practical workshop cupboard into a beautiful piece of furniture. Don’t scratch it! Well done.

@joedog86 Ай бұрын

I wanna be like this man when I grow up 😎What talent. So creative!

@dragunov525 3 жыл бұрын

Neil, I just wanted to tell you you're awesome 😎. You are one of my favorite makers on youtube, I'd say tied for top 3. All your wood projects you do are usually with relatively common tools yet you make some the best stuff and it's all high quality. That's not to say I don't thoroughly enjoy your other metal working projects, because I surely do. You have some amazing skills my friend. I always enjoy your videos, thank you for sharing. -Scott (CT, USA)

@millsbrian55 3 жыл бұрын

Beautiful work as always! You inspire me to do more, and do it better!

@SouthOfGate 3 жыл бұрын

What a stunning solution with the welded bolts for the drawer fronts. I was just revisiting some cnc table builds by Rainfall Projects and Frank Howarth and thinking, I need a Pask Makes and voilá!

@ruohonleikkaaja 3 жыл бұрын

It’s super satisfying watching a talented man work

@dysfunctional83 3 жыл бұрын

Can I ask you all to take a second to appreciate our boy here using PPE for everything as needs it. Given up commenting on tubers that clearly want to reduce their life expectancy! Great videos Neil, mate.

@KPA78 3 жыл бұрын

Envious of that fine table...and I'm neither a welder nor metal worker! Great design and execution!

@edkovac8978 3 жыл бұрын

Fantastic level of craftsmanship. Well done.

@RobertWiggers 3 жыл бұрын

Your narration/narrative (I'm not english...) Is amazing to listen to.

@jessewalley1529 3 жыл бұрын

A true craftsman. You are an inspiration on any project I do. One of my favorite KZfaq channels

@user-nd3lx1zg9t 3 жыл бұрын

My only lament about this is my father was lot alive in the KZfaq era. He would have loved to watch you work. He would consider you a true Mechanic. He used that moniker to describe a a person of exemplary mechanical ability. You sir, are a true Mechanic

@choncord 3 жыл бұрын

Indeed.

@Downtheshed 3 жыл бұрын

It looks mega, I was really surprised by that cordless metal cutting circular saw, what an absolute beast.

@mjremy2605 2 жыл бұрын

You are so good at this, no hesitation, smooth planning and execution. Fascinating to watch. I wish I had the tools, space, and time for metal crafting. Life is too damn short! So much more I want to do. Welding for sure!!! That is one magnificent set of drawers! I would buy some Loctite Rust Neutralizer to spray on the back side of metal plate you attached with screws. Bonds rust to metal so the hidden parts won't have any rust. The best rust proofing I have seen was on a metal box under my RV coated with anti rust proofing. 30 yrs later, nothing! Not a grain of rust under it despite being sprayed with water, mud, dust. rain. Amazing.

@juliogonzalez1803 3 жыл бұрын

Hello Pask, I love the way you made the storage cabinet. I have a welding table that looks almost exactly like yours ( includind the color ) but it doesn't have the storage cabinet so I will try to make one following your instructions, it seems to be very easy. Thank you for sharing... you are a very talented craftsman.

@rebeccajesse4604 3 жыл бұрын

I was just thinking to myself that I really wanted to watch a new video from you and you posted! Perfect timing!

@philandminiphil 3 жыл бұрын

Cracking Job as always. Look forward to the next creation.

@deziomakes 3 жыл бұрын

Many smart moments throughout your process. Great looking result, too.

@Rsama60 3 жыл бұрын

Nice project, looks good. Brilliant ideas to do this in situ. No worries about squareness then if the frame is square and true

@jcr723 3 жыл бұрын

You, sir, are freaking incredible! Awesome build

@davanders2006 3 жыл бұрын

I really love watching your video's but you used a metal cutting circular saw which I never new existed. Now I am going to get one for myself. I haven't worked with metal in twenty to thirty years but I am wanting to get back into it again. I'm so glad I was able to see you cut that metal without any problems. Cutting the sheets of metal was the sticky point for me but you showed a better way. I am so grateful that you shared your knowledge. Thanks for sharing.

@santiagorussi6790 Жыл бұрын

"You are the man" !!!! As we use to say here in Brasil, você é o cara !!!!!!! You are doing everything i want to do in all my life !!!! congratulatios !!!!

@ohhpaul7364 3 жыл бұрын

Watching you assemble your drawers reminded me of the time I was doing the same on my wooden assembly table and somehow managed to nail the entire drawer down to my table. more than a few nails went astray when I was shooting the gun, I blamed myself for the angle I was holding the gun at. To counteract this occurrence, I tried a new method of just holding it by hand and promptly nailed myself to the workpiece. It was that day that I learned the glue they glue those sticks of nails together with burns quite a bit when it gets under your skin. Growing pains. That looks like a very nice cabinet bench you have made. Thanks for the videos.

@charlvanniekerk8009 3 жыл бұрын

Guess who has a new welding table to easily cut those draws. This genius Pask Makes!

@elisabethreeves1786 3 жыл бұрын

Love the end frame on your t-shirt!

@videogalore 3 жыл бұрын

Excellent as always - such a superb level of fit and finish!

@jeffkeech8786 3 жыл бұрын

Really nice. I love what you do and it inspires me to get out and do more projects. Also appreciate the time and effort you put in from the planning of your projects to the execution👍👍👍👍👍👍

@olenilsen4660 3 жыл бұрын

Such a level of craftmanship! This bench will outlast the pyramids.

@shaggyego 3 жыл бұрын

2 words... plasma cutter. My personal opinion, is they're a game changer specially working in a small shop, I love mine...

@ZeroaxeSA 2 жыл бұрын

I can say the same!!!

@charliedalmasso4672 3 жыл бұрын

When the word overbuild become an understatement ! that is a cabinet for generations to come ! nice.

@robjchristopher 3 жыл бұрын

Great job - you make it look really bloody easy, but I know your years of experience contribute to that!

@JDKempton 3 жыл бұрын

My knees and hip screamed watching you crawl on the floor. Awesome bench!

@PaskMakes 3 жыл бұрын

Thanks! My knees could feel it too! ;)

@NRCarrillo 3 жыл бұрын

An amazing build and an amazing video. Thank you for sharing, and thanks for being you!! I'm impatiently waiting for the next vid!! Hopefully I'll survive until then!

@mori7956 3 жыл бұрын

Your videos are very calming when my anxiety is a bit high, thanks for uploading this today😊

@sdx1969 3 жыл бұрын

May I say that I can't wait for the next video, and how the table would turn out after installing the triangle drawers ? Amazing work Neil as always. 👍👍👍

@davidswanson5669 2 жыл бұрын

Boy those drawers are lovely. The extra work was well worth it.

@josephbreckenridge2966 3 жыл бұрын

Sir, you are amazing! I love your work and presentation is very clear. I have already learned a lot from you. Thank you.

@mattbarker3613 3 жыл бұрын

It's a real pleasure watching you work

@EisenbeilWerkstatt 3 жыл бұрын

Good job, it looks practical, robust and cute.

@johnnydingo8680 3 жыл бұрын

As always you make it look easy. Great ideas and well made. You are a true master craftsman.

@mohamadbayatzadeh9388 3 жыл бұрын

Excellent and practical, beautiful and instructive videos. Thank you

@JohnBodoni 3 жыл бұрын

Neil, your videos are always a joy to watch. Editing is something we viewers take for granted - we only notice it when someone does a poor job. I shudder to think of how much time you must spend on each video! The camera angles are always great, everything is always well-let, and you use enough time lapse judiciously. We always know what you've done even if sometimes we're not sure where you're going! :) And of course your content is top shelf. I grew up watching Norm Abram and Roy Underhill, and I reckon that you'd do well with your own TV show too. I'd sure watch it.

@gacastro 3 жыл бұрын

I like the design of the drawers. Looks very nice.

@Anthony-br3xk 3 жыл бұрын

I love watching your videos! They make my day Pask

@DavidWJoyce 3 жыл бұрын

Best precision craftsman I've seen. keep it up mate.

@frodobaggins169 2 жыл бұрын

Nice touch using flux core wire on the plated slides. That almost went unnoticed. Thanks

@Slayerformayor1983 3 жыл бұрын

That looks incredible, Pask.

@marclangevin9152 3 жыл бұрын

Awesome table . In regards to the casters .I would recommend adding a couple on the center support . As they would spread the weight load . In my hobby shop. All of my desks . cabinets etc are on casters. This makes rearranging and cleaning a breeze . Cheers !

@teejay622 2 жыл бұрын

Outstanding. I learned several tips from this video. That saw IS impressive. But the ability to take it to the metal outside had me making the Tim the Toolman grunt sound without even realizing it - lol.

@richlagger507 3 жыл бұрын

Very inspiring Neil! Well done.

@timhockersmith3934 3 жыл бұрын

You are a Master Maker for sure! Well done!

@mrskwrl 3 жыл бұрын

Endurance of a mule. Jesus. Well, and patience too. Just Wow.

@Craftlngo 3 жыл бұрын

this workbench is getting better and better, Neil!

@ianvicedomini2648 3 жыл бұрын

Utter brilliance mate. Superb quality and excellent video.

@kmrdin Ай бұрын

Your job was so fine and need ..thank you for the sharing

@brentonkelly3780 Жыл бұрын

Well done. Great work, and ideas. Thanks for sharing.

@CraigsWorkshop 3 жыл бұрын

Great video and great drawers Neil - love your methodical and patient approach. The result is excellent. You could always increase gluing area and strengthen those drawers with some quadrant trim glued and pinned inside each of the seams of the drawers. Lots of strength added from a tiny amount of additional wood. Welding and machining gear adds up quickly in weight :-)