Making EASY carbon parts for GIZFAB. Carbon Wings using the skinning wet lay method. part 2

Рет қаралды 86,541

Жыл бұрын

part 2 of a series of videos on Making Gizfab Micra lighter. Carbon Wings using the skinning wet lay method is a very simple way to make body parts!
check out ‪@GizFab‬ and his mad creation! you will not be disappointed a man is s sick fabricator!
Here is where i build the fastest Clio • Building the Fastest. ...
How I made rear arch extensions: • Making EASY carbon par...
How I made the bonnet: • Making EASY carbon par...
How I made the Roof: • Making EASY carbon ROO...
Milwaukee M12BPRT-0 Pop Rivet Tool
amzn.to/3JxTJqN
▶ All other consumables you can buy through my Amazon affiliate link: www.amazon.co.uk/shop/influen...
▶ RuskiWeldShit official merch: ruskiweldmerch.company.site/
▶ find me on Instagram: @ruskiweldfab
/ ruskiweldfab
▶ Give my page on Facebook like and a follow! / ruskiweldfab
▶ If you are new on youtube and would like to grow your channel faster, a must tool is TubeBuddy! www.tubebuddy.com/ruskiweldshit
▶ Where I get my Commercial Music 2 Months for FREE! (ARTLIST):
artlist.io/Ilya-495316
Beat provided by freebeats.io
Produced by White Hot
▶ Looking to partner with me? All Enquires to ruskiweldfab@gmail.com

Пікірлер: 91

@alistairuysal1858 2 ай бұрын

Brilliant work. Good how you learned from the first wing where to improve the second wing. Good weight saving. They look a good finish to me. End of the day it’s a race car not a show car. Great work 👏

@RuskiWeldFab 2 ай бұрын

thank you.

@MisterMister-rz1zi 2 ай бұрын

Glue gun sticks if you cut them to length ..drill out the centre if needed and can be used as spacers behind the wings where you need to bring them out to suit the existing panels...they work great...nice work guys and great info for the diy guys ...lovin this👌

@RuskiWeldFab 2 ай бұрын

great tip!

@benhoshinji Жыл бұрын

ilya, wicked content as usual. this style of video is excellent and i enjoy the TOTB and time attack coverage as well. keep it up mate

@RuskiWeldFab Жыл бұрын

Thanks mate

@hall159 Жыл бұрын

Loving the work Ilya, great collaboration 🤘

@RuskiWeldFab Жыл бұрын

Cheers!!

@feathersandtarmac6456 9 ай бұрын

Great stuff I’ll be having a good at this on my little mr2

@krodsgarage Жыл бұрын

640g! nice! this is just the video i was looking for! ty

@RuskiWeldFab Жыл бұрын

Glad I could help!

@ninacossetto2283 Жыл бұрын

Top job, keep going guys🏆

@RuskiWeldFab Жыл бұрын

Thank you! Will do!

@TuningShed Жыл бұрын

Really interesting. I've got to get busy with some composites on my car soon. Glad I came accross your channel. 👊👊

@RuskiWeldFab Жыл бұрын

Awesome, thank you!

@TheRealKlinky Ай бұрын

I freaking love k11 micras!...when i was at university I was sooo broke - I bought a slightly dinged micra for £50 from a colleague at one of my part time jobs, who used it to teach her son to drive, hence the dings...I could barely afford fuel/insurance/road tax let alone service it so it went unserviced for 4 years & despite of which, it used to sail through its yearly MOT with only a hope & prayer on my part! Fantastic little cars!...I ended up giving it to my landlord in lieu of rent just as I started my first proper job out of university - he wanted it to teach his wife to drive. I'd like to think it's still cruising around, probably still not being serviced but stone cold reliable!

@eefui 7 ай бұрын

great job !

@RuskiWeldFab 7 ай бұрын

cheers

@6ixthstage845 Жыл бұрын

I want to do this for my MK2 Golf build. Nice job!

@RuskiWeldFab Жыл бұрын

You should!

@6ixthstage845 Жыл бұрын

@@RuskiWeldFab I will be in touch with questions ❤️ Thanks for the inspiration. Subscribed!

@6ixthstage845 Жыл бұрын

what was the first layer? dialene?

@primeral Ай бұрын

fantastic content, gents. New subscriber from the States

@RuskiWeldFab 27 күн бұрын

Awesome, thank you!

@thunderousity Жыл бұрын

Great job guys. Loving the vids. I'd be interested to see these tested at high speeds and whether you may need to strengthen them a little to stop them vibrating.

@RuskiWeldFab Жыл бұрын

Wings already been tested and they need nothing!

@GizFab Жыл бұрын

Can confirm it’s al good!

@Exotic_drift Жыл бұрын

@@RuskiWeldFab why you mad tho

@HK-uq9by Ай бұрын

Nice. they are just a bit bigger than the original

@RuskiWeldFab 27 күн бұрын

difference is negligible on race car

@grantvxr83 Жыл бұрын

Great stuff as always ❤️ is it possible to make more show car style pieces at home? I think some fancy Ruski Carbon RS4 parts videos 😘

@RuskiWeldFab Жыл бұрын

yeah. just needs more time and effort with polishing etc

@Choober65 Ай бұрын

Why did you not vac bag the panels? I don't think you will get full strength without doing it.

@RuskiWeldFab 27 күн бұрын

not required

@kantorobo7718 Ай бұрын

alright I will be doing this the coming weeks my wings are messed up might as well make new ones from carbon :)

@RuskiWeldFab Ай бұрын

Hope you enjoy

@rickarda9232 Жыл бұрын

what foam do you use that doesn't melt from epoxy cure?

@hairyplotter1121 7 күн бұрын

Wait.. you’re making a k11 micra lighter? I wanna know what this thing weighs when you’re finished with it and is it the standard engine?

@Kapil-Patel Жыл бұрын

Insane weight saving, wish I can afford Ilyas expertees one day. Have you considered marking your parts with your logo on the inside ?

@RuskiWeldFab Жыл бұрын

i have! my roof has my old logo on the inside!

@corahughes7768 2 ай бұрын

Peep tha Rays RE B51's on tha Fozzy STI in tha back ground :3 Looking good! Ah got some on ma JDM 91 Legacy wagon turbo :P JDM only WRX/STI Limited wheels. Quite rare stock wheels. Fer those ah ye who dinnae ken bout them.

@RuskiWeldFab 2 ай бұрын

Right on

@joeygodden Жыл бұрын

Loving the videos, what are the extended arches off they look really smart

@RuskiWeldFab Жыл бұрын

sorry not sure to be honest. head over to @gizfab channel and ask him maybe

@GizFab Жыл бұрын

They are Nismo archs. old scholl stuff. We have the moulds for them.

@minimumpfc Жыл бұрын

@@GizFab Would LOVE a set, been looking for a year now. What do I need to do to acquire some :)

@sandwich.entity3810 Ай бұрын

Bolting the carbon against the nuts doesnt seem like a great idea to me. The small area that the clampng force of the bolt is spread over and the sharp corners of a nut is likely concentrating stress and would make the panel much more likely to break there.

@RuskiWeldFab 27 күн бұрын

nah it works well to be fair

@vicleyend812 Жыл бұрын

Hey guys could you please share a link where I can buy the roll of Carbon fibre layer and all the other stuff?

@RuskiWeldFab Жыл бұрын

@easycomposites

@godzuki2099 4 ай бұрын

The carbon fiber showing on the surface might be a pro move... If it is bumpy enough it might work like the golf ball surface, who knows how useful that might be though

@Divorceization 11 ай бұрын

So the layer you apply to the panel so the carbon panel can be removed is called eglass? Or diolen?

@hondahacks1014 9 ай бұрын

Its pva

@hondahacks1014 9 ай бұрын

You shouldve covered it in peel ply and it wouldve been smoother right?

@RuskiWeldFab 9 ай бұрын

yes if "dry carbon" is the look you going for.

@markscarborough1018 2 ай бұрын

You're gonna need aero to keep this on the floor just to stop a light gust of wind from blowing it away when stationary!

@RuskiWeldFab 2 ай бұрын

That's a great idea!

@gfroudy Жыл бұрын

What did you use for the bottom layer? I have tried to search for it but I can't find anything with that name

@gfroudy Жыл бұрын

The captions spell it as darling but I don't think that's correct

@RuskiWeldFab Жыл бұрын

its called Diolen. but you can use e-glass as well

@psycho3344 4 ай бұрын

Bit of a random question but what do you do if the bonnet you need to skin is from a larger car ie "Toyota supra" that you cant get the carbon cloth to cover the whole bonnet? If you skin the bonnet in x2 lengths of 1200mm carbon wouldn't you see the join/overlap in the center? Would you have to make a mould first in fiberglass so the overlap would be then on the inside of the bonnet?

@RuskiWeldFab 4 ай бұрын

overlap will be on both sides. you just have to make it a very neat one. or find 1.5m sheet

@psycho3344 4 ай бұрын

@@RuskiWeldFab thanks buddy! I want to do the upper layer of my dashboard in carbon but I want to try and save the dash from being damaged as its rare and in good condition. Is there a way I can take a mold from it without damaging it? Every tutorial on yt people doing dashboard they always ruin/sacrifice the dash to build one in carbon

@RuskiWeldFab 4 ай бұрын

Wrap it first.

@kevinkev1530 Жыл бұрын

👍🏾👍🏾

@RuskiWeldFab Жыл бұрын

👍

@jameslee1374 6 ай бұрын

This the same techquie people use to make carbon Lay overs on trim pieces ?? Beside removing the carbon trim, it just stays on the trim pieces then clear coated. Also how xome you guys never clear coated tge carbon after ??

@RuskiWeldFab 6 ай бұрын

Correct. Process is the same. We wanted to save weight. Hence no clear coat

@catalinosolorzano7054 2 ай бұрын

Can you share the product you use to make this please where can i get this stuff

@RuskiWeldFab 2 ай бұрын

@easycomposites

@Dansgotasti Жыл бұрын

How much does the materials cost to do 2 wings

@RuskiWeldFab Жыл бұрын

It really does depend. We bought in bulk to do everything. So hard to say for sure how much just for the wings

@Dansgotasti Жыл бұрын

@@RuskiWeldFab no worries cheers for getting back to us

@johnrobie9694 9 ай бұрын

Nice work, but all the camera movements were making me nauseous.

@Mannin_Watch_Time 2 ай бұрын

Amen

@getthecats 5 күн бұрын

Weak

@junioral9451 11 ай бұрын

I want to make carbon fiber for my car as a project and I have no clue of anything. When i saw how the carbon fiber wing was done I was like thats terrible quality but theyre just the side wings, if it was the door i would have been like yeah they going to die.

@anthonybryantmedia 10 ай бұрын

One thing to consider is they did one layer with epoxy to get the shape. Cured then put on the car. For a quality finish you would then do 3 epoxy coats to get that carbon finsh you are thinking of.