Finally! Someone using measuring instruments for measuring, and marking tools for marking. Thank you!
@arcanix518 жыл бұрын
i have always maintained, that of all the machines in a machine shop: only the lathe has the ability to replicate itself and be completely self sufficent. you sir, have proven this to be true!
@RPMechanics8 жыл бұрын
Thanks for watching!
@paradiselost99465 ай бұрын
make the slides ;)
@macrumpton4 жыл бұрын
This makes a lot more sense than trying to mill on a drill press.
@clutch5sp9893 жыл бұрын
Always wondered about mill'n on a DP. With the lathe, you could fab up a heavy duty spindle of sorts that could withstand the side loads. Then use a cross slide vise and do some primitive milling functions. I've seen some DP's that are already HD enough to perform milling projects.
@fxm57158 жыл бұрын
Great idea, repurposing the compound slide as a vertical milling slide. I'm sure I never would have thought of it myself. I probably wouldn't have gone and bought the milling attachment made by Atlas if I'd seen this first. Nice job!
@RPMechanics8 жыл бұрын
+FXM Thanks, I appreciate it.
@donotwantahandle11118 ай бұрын
I agree! Never thought of doing this.
@dikhed1639 Жыл бұрын
Thank Thor and Wotan! A good video without all the unnecessary yakking going on and on and on. Also, the vid has been trimmed so we don't have to watch the hours and hours that actuially went into making this. BTW, GREAT! milling attachment!
@davidchadwick18927 жыл бұрын
Thank you, you've shown me that I'm not a million miles away from getting my own home made milling attachment correct !
@RPMechanics7 жыл бұрын
Thanks for watching!
@tonywilson47133 жыл бұрын
@@RPMechanics First time I've seen your channel. I'm just setting up a shop and my lathe is about to arrive. This is a great way to not having to immediately buy a mill. I love ho you repurposed the compound slide. How is it for rigidity?
@kolejustin97653 жыл бұрын
pro tip: you can watch series at KaldroStream. Me and my gf have been using them for watching all kinds of movies these days.
@bransonford62823 жыл бұрын
@Kole Justin Definitely, I have been using flixzone} for since november myself =)
@curtwarkentin28878 жыл бұрын
Dang, you make all that work look so simple and easy. I'm sure you put lots of thinking and planning into it and it really does show. Awesome job.
@RPMechanics8 жыл бұрын
+Curt Warkentin Hey Curt, I really appreciate that. Thanks.
@NotSoDumb7 жыл бұрын
I made a similar attachment for my Grizzy G8688. Beats the heck out of buying another machine. Works very well and fun to use. Thanks for the build.
@RPMechanics7 жыл бұрын
Thanks for watching.
@NotSoDumb7 жыл бұрын
You're very welcome. Keep up the good work.
@kkuhn7 жыл бұрын
great idea to use the compound as the vertical slide
@robplotts94127 жыл бұрын
And thats how its done .nice job .im lookin a mini mill lathes right now tryin to anyway but this popped up
@thecontinuingadventureso-qs5zm4 ай бұрын
Thanks great to watch someone who knows what they're doing. Also I love vintage KZfaq ; - )
@hobbyhermit665 жыл бұрын
I gotta try this. Thanks for posting.
@colinbutterfield85805 жыл бұрын
This video explains the mystery parts I found when I bought an Atlas 6-18 that hadn't been used for 20 years! Now I can mill! Many thanks.
@RPMechanics5 жыл бұрын
Thanks for taking a look.
@bobolink8904 жыл бұрын
10:55 Awesome clamping job my man! You would not believe how many people do not know how to use those, until recently I was one of them.
@RPMechanics4 жыл бұрын
Thanks for checking it out.
@NotSoDumb8 жыл бұрын
I was thinking about buying a small mill but I used your general idea and have already started making a similar setup for my Lathe instead. Thanks a bunch.
@RPMechanics8 жыл бұрын
+NotSoDumb Thanks for checking out the video.
@NotSoDumb8 жыл бұрын
Your welcome and thanks for posting it.
@NotSoDumb8 жыл бұрын
My attachment is complete.Dialed in perfectly square to the bed and dead nut to the spindle. Just need to come up with a vice for it, maybe something like you did. It's a small Lathe, a little Grizzly 12" and I have almost 3" of travel and a lot more if I remove the splash guard. Can't wait to try it out, have some bushings I need to make that are keyed outside. I've been broaching but this will be much better. Thanks again.
@jcknives41625 жыл бұрын
Good work. Strong, simple, split!!! Just what you need for small milling operations. NICE!!!
@RPMechanics5 жыл бұрын
Thanks a lot. This setup and some patience will get you through some of the tougher projects.
@williamhorvath34755 жыл бұрын
That's a very ingenious way to make your metal lathe more versatile.
@RPMechanics5 жыл бұрын
Thanks for taking a look.
@stephencutajar25488 жыл бұрын
I'm in the process of buying a lathe, and this may be a better option then buying a combo where space is very limited. It would also be a great project that would serve a useful purpose.
@mediaministries78894 жыл бұрын
I'm also looking to get a lathe - and planning to have to use it for about all my machining needs - right now can only do rough work by hand. We see all these videos where people have every piece of equipment and forget that a lathe can do so many tasks. Yes - a great project to serve a variety of needs.
@tack31988 жыл бұрын
Cracking job, certainly opens up the versatility of your work horse. From an absolute newbee, learning a lot from you guys.
@RPMechanics8 жыл бұрын
Thanks for taking a look.
@jster19638 жыл бұрын
Super Dooper!! Man you do awesome work!
@RPMechanics8 жыл бұрын
+jster1963 Hey thanks Jster! I appreciate you taking a look.
@swarandeep135 жыл бұрын
I made this same attachment when i was just 15 yrs old ..we did not have millin in our workshop my dad always use to give me ideas to use envill cutters on lathe ..have done several type of milling..slotting ..keyway jobs on lathe itself ...my passion keeps getting enhace ...nice attachment
@RPMechanics5 жыл бұрын
Thanks for watching.
@zacharybelford37714 жыл бұрын
wow. I've been trying to figure out a way to make a milling attachment and work holder using ONLY the lathe itself... and here it is! Thanks, this is a really smart idea.
@RPMechanics4 жыл бұрын
Thanks for watching!
@ypaulbrown8 ай бұрын
well done....cheers from Florida,Paul
@ChuckCoy8 жыл бұрын
Nice video! Thanks for taking the time to do it.
@RPMechanics8 жыл бұрын
+Chuck Coy Thanks for taking a look.
@ayamkrew6 ай бұрын
watching in 2023.... thanks for informative video..... 👍
@RPMechanics6 ай бұрын
Thanks for watching!
@guyward51377 жыл бұрын
Great project. Made something similar to that for my old South bend lathe years ago worked well for small projects. GW
@RPMechanics7 жыл бұрын
Thank you.
@Jacob-647 жыл бұрын
Thanks for that ... like your uncomplicated approach this is now on my to do list
@RPMechanics7 жыл бұрын
Thanks for watching.
@gordonagent70378 жыл бұрын
Another great project, easy to follow and have a crack at ourselves, well done
@RPMechanics8 жыл бұрын
+Gordon Agent Thanks a lot.
@garyhall8675 жыл бұрын
Great Job Bloke Thanks for the Vid and Inspiration.
@RPMechanics5 жыл бұрын
Thanks for checking it out.
@killerkane19576 жыл бұрын
Very creative! You’ve got that Atlas rigged up nice and humming! Very nice indeed! Chip on bro!
@RPMechanics6 жыл бұрын
Hey thanks man!
@Kevin_7477 жыл бұрын
Nice work. I have the milling attachment for my Atlas 12" but I still learned from your video.
@RPMechanics7 жыл бұрын
Thanks for watching.
@5005ginger6 жыл бұрын
Good job. Fantastic solution!
@RPMechanics6 жыл бұрын
Thanks!
@jairzuniga49487 жыл бұрын
total respect, i got associate in designg and wanted to start uilding tattoo machibes and stuff for tattoo machines but since i ended my i ternship i have no access to lathe or mill, just have ny drill bench press, thabks alot, just amazing!!! you saved my wallet
@RPMechanics7 жыл бұрын
Thanks for watching.
@phooesnax8 жыл бұрын
Have to admit I have not thought of trying it ......interesting idea. Well done video.
@RPMechanics8 жыл бұрын
+phooesnax Thanks a lot.
@brucewilliams62925 жыл бұрын
Clever idea and well executed!
@RPMechanics5 жыл бұрын
Thanks for watching.
@prenticeemler77097 жыл бұрын
great idea works just like a mill attachment
@RPMechanics7 жыл бұрын
Thanks.
@richdemarti7 жыл бұрын
Nicer than the one I made. Good job. RichD
@jimp6576 Жыл бұрын
Very creative, simple, smart.
@airdave19612 жыл бұрын
Nice. Did with my Boxford and 10 inch Atlas. Gonna do it with my 6Inch. nice stuff.
@themadmailler7 жыл бұрын
awesome job! I think if you did the extra work to attach a small machinist's vise onto the compound, you'd have a lot wider clamping ability than with the little vise you made. Just an observation. Thanks for making the time to make the video!
@UptownSport3 жыл бұрын
How would you get vertical movement?
@antoniopalattella31676 жыл бұрын
Nice job. Clear explanation!
@RPMechanics6 жыл бұрын
Thanks.
@gigipopa47858 жыл бұрын
Great job! Thanks for sharing.
@RPMechanics8 жыл бұрын
+Gigi Popa Thanks for watching.
@MilanDupal7 жыл бұрын
Well done!
@ZappninLLP8 ай бұрын
Great work!
@keemhala8 жыл бұрын
Excellent! How have I missed your channel? I just watched two of your vids and they are great. New subscriber here!
@RPMechanics8 жыл бұрын
+Keem2000 Thanks and thanks for the sub!
@OldSneelock8 жыл бұрын
Nice work. The angle plate and bolting method is a lot sturdier than mine. A suggestion. Having the set screws on opposite sides of the base tends to make the part contact only on the two screws allowing it to teeter on the points. Most setscrews are set at 90 degrees to each other. That makes it always have at least a 3 point contact for better grip and centering.
@RPMechanics8 жыл бұрын
+Old Sneelock's Workshop I was waiting for someone to pick up on that. I didn't realize the error until after the video was made. Still learning. Thanks.
@OldSneelock8 жыл бұрын
RP Mechanics Nothing brings out the mistakes like hitting enter. :-)
@Man-in-da-shed7 жыл бұрын
+Old Sneelock's Workshop what a great saying. And so true.
@sfranklandnf5 жыл бұрын
@Hoefledorf Funny I do it differently. I place my set screws at 120 degrees apart. Makes for 3 equally spaced points of contact. But at the end of the day what ever works and gets the job done is the right way to do it.
@kevinpulver40278 ай бұрын
I really enjoy the genuine humility in which constructive suggestions are given and received. (Truly an online rarity) All he needs to do now is add 2 more set screws perpendicular to the first two. It'll look like design overkill rather than a mistake cover up.
@dustinmasters92397 жыл бұрын
Great project!
@RPMechanics7 жыл бұрын
Thanks!
@tim9lives8 жыл бұрын
Great video. Good instructions and great video production. Just a thought for future use. I always was under the impression that one would get better holding power of round mounts by locating the two set screws at 90 degree point instead of the 180 opposing points. The theory behind that is that the screws tend to push against each other at 180 degree and you now can get a rocking motion with only 2 contact points whereas when located at 90 degrees..... You now have 3 contact points of the rotating mount. No possibility of rocking and actually more surface contact / friction...... Plus the 3rd point of contact is actually more surface area since you get contact of the round portion of the post touching the round rotating flange. For what it's worth..... If you agree.... It's an easy fix. Just drill another set screw and you are off to the races.
@RPMechanics8 жыл бұрын
Thanks. Yes you are correct. I realized the mistake after the video was made and corrected it.
@cdrive5757 Жыл бұрын
@@RPMechanics It should have been placed in "TOP COMMENT" 6 years ago! Wakodahatchee Chris
@johnkinnane5478 жыл бұрын
G'day good job interesting to watch you make it, thanks for sharing it. Regards Tassie John
@RPMechanics8 жыл бұрын
+John Kinnane Thanks John. I appreciate you taking a look.
@adamengland66096 жыл бұрын
Nice mod well executed and filmed.
@RPMechanics6 жыл бұрын
Thanks a lot.
@joemmams57857 жыл бұрын
my old 10" South Bend came with both factory taper and milling attachments,have used the taper attachment much more than the milling attachment...
@DJM1LOVE8 жыл бұрын
thats a good piece of work
@RPMechanics8 жыл бұрын
+Martin Thanks.
@thunderbirdbob17 жыл бұрын
thank you I'm going to make one for my lathe.
@RPMechanics7 жыл бұрын
Good luck.
@MrJuanfelipeayala7 жыл бұрын
Los felicito por su trabajo, y gracias a compartir su gratitud respeto (ARTRUSTA) y cortesía
@tinker4537 жыл бұрын
LOVED THE VIDEO AND THE CRAFTSMAN LATHE! I HAVE ONE LIKE IT. jUST SUBSCRIBED AND THANX FOR THE TUTORIAL.
@RPMechanics7 жыл бұрын
Thanks for watching.
@miura19718 жыл бұрын
Excellent Work !!
@RPMechanics8 жыл бұрын
+miura1971 Thanks!
@ggordon41276 жыл бұрын
Very clever and well done.
@RPMechanics6 жыл бұрын
Thanks.
@hasanaydin227 жыл бұрын
great job done thanks for shearing RP
@RPMechanics7 жыл бұрын
Thanks.
@EitriBrokkr8 жыл бұрын
That is the best idea I've seen in a while. I'm kind of upset I didn't think of it first
@RPMechanics8 жыл бұрын
+EitriBrokkr Thanks, but it's actually an old idea.
@EitriBrokkr8 жыл бұрын
I've seen milling attachments for lathes, I've just never seen one made out of the cross slide
@RPMechanics8 жыл бұрын
+EitriBrokkr That's what I mean. I got the idea from an old picture.
@EitriBrokkr8 жыл бұрын
+RP Mechanics well thanks for passing it on
@pieterbotes89385 жыл бұрын
Nice idea brother!
@RPMechanics5 жыл бұрын
Thanks.
@RickRose8 жыл бұрын
Great instructional as always--I enjoy seeing the old-school layout techniques. Two questions for you: 1) What sort of collet system do you have for holding end mills? 2) Didn't you recently acquire a mill?
@RPMechanics8 жыл бұрын
+Rick Rose Thanks Rick. I have a set MT-2 collets for the lathe headstock. Yes I have a mill but also like to experiment with different set ups and try different things. I always learn something new.
@derekludwig96788 жыл бұрын
THANKS! All I needed was some way to do light milling. Saves me from buying an Atlas 618 milling attachment as those do cost a lot.
@RPMechanics8 жыл бұрын
+Derek Ludwig Thanks for watching and good luck.
@Terry_Baker8 жыл бұрын
Nice work!!
@RPMechanics8 жыл бұрын
+Terry Baker Thanks!
@musicmaneman387 жыл бұрын
Any thoughts on making a steady rest for the spindle to take the strain off of the bearings?
@yleecoyote036 жыл бұрын
Clever! Top drawer!
@RPMechanics6 жыл бұрын
Thanks a lot.
@tradingandautomation24965 жыл бұрын
very helpful video ...keep doing...thank you !!
@RPMechanics5 жыл бұрын
Thanks.
@__austrianoldboy_9861 Жыл бұрын
Smart idea!
@ChunkiieCustomz7 жыл бұрын
How have you not made a spindle nut protector yet. As good as you are and how many upgrades you have done? I'm sorry I know I'm assuming
@coalbuster5 жыл бұрын
You can buy a 1 1/2"-8 steel nut from McMaster for $6 and change and make a spindle nut protector from that for less than the price of round stock.
@stype97798 жыл бұрын
Great video ! Subbed . Cheers
@RPMechanics8 жыл бұрын
+stype977 Thanks a lot.
@samp13946 жыл бұрын
Good work and good idea
@RPMechanics6 жыл бұрын
Thanks.
@joeybobbie12 жыл бұрын
That’s a Great idea. I have a 6” Atlas Lathe just like your Craftsman. I’m guessing yours is a 6”. Is there any other modifications you have done to your Lathe?
@ericschwartz78617 жыл бұрын
thanks great idea am planning on making one for my atlas
@RPMechanics7 жыл бұрын
Thanks for watching.
@cvmikeray28 жыл бұрын
Great work.
@RPMechanics8 жыл бұрын
+Practical Metal Thanks, I appreciate it.
@MrIslandkent8 жыл бұрын
Great Job RP! Made one up since I saw your video. Actually just finished it this morning. Made a double hole T-nut with it for the 3 inch vice using a collet and 1/4" end mill. Had to make small cuts as it would kick it out of true if larger ones were taken. Have you had this problem? Once more thank you for your great videos on the your upgrade on the 6-18! Please keep them coming.
@RPMechanics8 жыл бұрын
+kent stright Thanks a lot. Yes I've had that problem. Happens when I cut with both sides of the end mill. I'm climb milling and conventional milling at the same time. I try to make light cuts to the proper depth and switch to conventional milling to widen the slot.
@miguelcastaneda72368 жыл бұрын
another trick find old 3 inch chuck make a backing plate with shank..also make a block to fit vise or fixture bore out for the dia.on shank..now you can mill hexs and odd shapes
@OldSneelock8 жыл бұрын
+Miguel Castaneda Good suggestion. Would be easy enough to make an indexing plate for the base of the cross slide.
@BisonWorkshop8 жыл бұрын
good job ,am. i like it. very simple
@RPMechanics8 жыл бұрын
+Bison Workshop Thanks Bob.
@jackormrod91287 жыл бұрын
Superb tutorial thank you
@RPMechanics7 жыл бұрын
Thanks for watching.
@McFingal8 жыл бұрын
Damn dude that's pretty sharp. Did you copy that or come up with it yourself. I really like it, but I'm not selling my Bridgeport clone. Lol
@RPMechanics8 жыл бұрын
+The Texas Gun Guy Thanks man. I got the angle plate idea from a picture and worked out the rest.
@McFingal8 жыл бұрын
+RP Mechanics I think that's one of the beast parts about machining, you get to make what you need, Well have a good weekend.
@MegaLostOne3 жыл бұрын
Thanks for the vid. I have the same lathe in Atlas, what size angle plate did you use?
@RPMechanics3 жыл бұрын
3x2.5.
@cnc-ua8 жыл бұрын
If there is a mill in your shop, no need for milling attachment for a lathe ))) Thanks for sharing
@texasgonzo677 жыл бұрын
and if there is no mill in the shop?
@alanvcraig5 жыл бұрын
.... then how could this video be of any use?
@mossturn015 жыл бұрын
Idiot. If there was a milling machine, he wouldn't need to do this.
@leslieaustin1515 жыл бұрын
mossturn01 but he was using a milling machine to make the parts... Les
@mossturn015 жыл бұрын
Really, I never saw one.
@zombieprinting26703 жыл бұрын
is this plate 3x2.5x2?? seems bigger to me but that could be an illusion. Nice easy build. Going to try it. Just unsure about angle plate dimensions. Thanks
@rogerhouston10927 жыл бұрын
mite sound bad but which bandsaw blades are the best for cutting steel ,,,ok thanks for making great video this will help me alot
@RPMechanics7 жыл бұрын
I have bi-metal 14 tpi on this saw.
@skyskelton976 жыл бұрын
Nice job, i plan on making something like this for my grizzly g1001, but unfortunately the swivel/clamping mechanism for my top slide if more complex than yours.
@RPMechanics6 жыл бұрын
Thanks and good luck.
@TrailBusterBrute17 жыл бұрын
That was just fantastic. Just what I needed and you didn't "cheat" with a 5k milling machine. Seems like I can't get around buying an axa tool post for my th42. Where can I get an angle plate?
@RPMechanics7 жыл бұрын
Thanks. I bought my angle plate from Grizzly.
@anthonymarino4260 Жыл бұрын
well done thanks for sharing
@OtisMamed5 жыл бұрын
Did the direction you milled the clamp make a difference for good cutting, and at what RPM did you do the milling? Thanks for the video!
@RPMechanics5 жыл бұрын
I use conventional milling when I can, but when cutting a slot like this I had to cut on both sides. Don't know the rpms.
@thetriode4 жыл бұрын
How's the deflection compared to say a Palmgren? Watching you mill the work holder it seems as if it's a lot more stable than I would have given it credit for. I've got a clapped out Atlas 12" and it's got a ton of slop in it. Maybe having the spindle holding the tooling vs having it in the lathe tool post makes a difference? Overall awesome, a creative solution to an ageless problem.
@RPMechanics2 жыл бұрын
This lathe is a very slow mill.
@miguelcastaneda72368 жыл бұрын
good job laying out base....yr fixture kinda mirrors the articles in popular science and mechanix of the 1940s theres also a few articles with prints
@RPMechanics8 жыл бұрын
+Miguel Castaneda Thanks. Yes, this is an old trick.
@claudiov4288 жыл бұрын
Molto ingegnoso, bravo.
@RPMechanics8 жыл бұрын
+Claudio V. Thank you.
@HarpreetSingh-dd5rw3 жыл бұрын
Thanks for the video, please let me know the instrument that you have used to draw center line on the disc. Subscribed,
@RPMechanics3 жыл бұрын
Hermaphrodite calipers
@HarpreetSingh-dd5rw3 жыл бұрын
Thanks for reply, but i need to know the instrument v in shape n scale at its centre,
@RPMechanics3 жыл бұрын
combination square center finder
@geoffr40184 жыл бұрын
Hi. I am new to home machining. Enjoying your videos. What model of Craftsman lathe are you using? Thank you in advance
@RPMechanics4 жыл бұрын
It is a 101. Identical to an Atlas 618.
@ecs0493 жыл бұрын
I would have put the set screws in the swivel base at 90 or 120 degrees instead of 180 but other than that I really like what you've done. Thanks for posting it.
@RPMechanics3 жыл бұрын
Yes I realized that later. Thanks
@panchovilla14868 жыл бұрын
You are the man😸😸
@RPMechanics8 жыл бұрын
+pancho villa Thanks!
@MakinSumthinFromNuthin7 жыл бұрын
Any more content forthcoming? Always enjoyed your videos.... :)
@RPMechanics7 жыл бұрын
Thanks. Yes I hope to be making more videos.
@jEST3R03318 жыл бұрын
Nice work! Where did you get the angle bracket?
@RPMechanics8 жыл бұрын
Thanks. I got it from Grizzly, I believe. Had it for awhile.
@jEST3R03318 жыл бұрын
OK thanks for the reply... I like that bracket, I might give it a go!
@Tater79bj8 жыл бұрын
Hope you don't mind if I copy your design lol. It's brilliant!
@RPMechanics8 жыл бұрын
+Tater79bj It's actually an old idea that I got from a picture. Good luck with yours. Thanks!