Making Lathe MILLING Tool Attachment at home

Рет қаралды 159,141

3 жыл бұрын

I hope you like the idea
Best Mini Metal Lathe Machine
• Testing New Best Mini ...
How to make an electric snowmobile at home
• How to make an electri...
There is more to watch here:
/ @gs_diy_ideas

Пікірлер: 71

@MrF4eable 3 жыл бұрын

You should have spent a little bit more time making this. The stickout on the shaft was way too high, you should have used a live center. The threads on the shaft leave to be desired (hence the horrendous runout). Lastly, welding the square piece aligned by eye is not the best option for precision. In the end, the finished product looks like what it should be but isn’t really usable as is.

@msamour 2 жыл бұрын

I'm thinking he wasn't aiming for precision.

@joejoejoejoejoejoe4391 5 ай бұрын

Not very rigid either.

@calderon4128 3 жыл бұрын

Finally I do Not see any milling work

@idiotradar1 3 жыл бұрын

I notice his thanks replies are only returned on positive comments by viewers with comparable knowledge. Use the criticisms to learn from, as they are the ones you should be thanking.

@jimzivny1554 3 жыл бұрын

I think I'd spend a little more for a quality chuck to put on the shaft, the runout was horrible. Good project though

@eniregnat 3 жыл бұрын

That chuck can't be that crap. It might be the thread. Should have cut the thread with the lathe instead of die. Or buy an ER chuck with straight shank.

@MrF4eable 3 жыл бұрын

The threads would have needed to be cut with the lathe rather than by hand. And the shaft would have needed to be machined with a rotating center...

@RustyInventions-wz6ir 4 ай бұрын

Very nice work.

@a.nellsechs6817 Жыл бұрын

Should of welded before you inserted bearings, maybe take off just a little more where the bearings went in? Looked like something was warped somewhere

@billjackson9702 3 жыл бұрын

Interesting. Kinda like an indexing system, of sorts? Learning a lot of things from videos like this one. Great job.

@TheSmmp1 2 жыл бұрын

Great job! I recomend you use conical bearings due to the load they recibe and try to add adjustable height for doing diferent opperations. Greets from Uruguay

@rogeronslow1498 2 жыл бұрын

They are called tapered roller bearings.

@kieranh2005 Жыл бұрын

The quick change tool post gives a degree of adjustment in height.

@scratch_440 2 жыл бұрын

Great video! I'm still new to machining so I have a noob question, why do you bore upside down in reverse? I have see a few people thread this way but never noticed anyone else boring this way. Curiosity peaks my interest. Thanks again for the great content.

@LavaDonuts Жыл бұрын

From what I've seen online, there can be alot of different reasons to run a lathe in reverse with upside-down tools. While I don't know about this specific case, sometimes it can be so if there's a lack of rigidity, the tool can deflect upwards and away from the work rather than be pulled down and into the work, scraping your work, artisan makes has a video where he mounts a parting blade upside-down and this was his general explanation

@quocbao2892 Жыл бұрын

anh phải sài bạc đạn đủa ,nó không bị nhồi.và để lên máy chống tâm hai đầu sau đó mới hàn cái cán dao .nó mới ngay tâm.ok

@ARIFINLATHE 2 жыл бұрын

Ide anda bisa saya coba di bengkel saya pak terimaksih idenya..🤝🤝🤝🤝

@bobuk5722 Жыл бұрын

Hi folks, don't hammer bearings, it damages them. Don't hammer things held in the lathe chuck, it damages it's bearings .....

@UnacceptableViews 2 жыл бұрын

cool project and neat idea but that chuck runout gave me a headache...

@Jacob-64 2 жыл бұрын

Sorry ,but this is a bit agricultural. Plus your title is very misleading ,I think it's called "clickbait"

@gayatriengineering4109 Жыл бұрын

You will bore finished after can't welding.but you will do that.the bearing seating not accuracy.The bearing hub make line bore only.

@bharat4806 3 жыл бұрын

This chuck has no smooth movement

@jfjjjjfj 3 жыл бұрын

Good tool 😺 Why do you have the boring bar upside down? And at that strange angle?

@tommartin4979 3 жыл бұрын

Have to wonder if you know what a center drill is used for?

@Henry-gj7mr 2 жыл бұрын

Really ? Just because someone names it a "centre drill" doesn't mean that's it's exclusive use to use it on the centre of work pieces. It provides a "centre" that you can then use for other procedures, (for a steady or further drilling perhaps?). Give it a try on other applications, you might surprise yourself.

@mrimmortal1579 Ай бұрын

@@Henry-gj7mr I used one once as a fork. Gotta say I wasn’t impressed. And it took forever to finish my dinner that night!

@ARIFINLATHE 2 жыл бұрын

I can try your idea in my workshop, sir, thanks for the idea..🤝🤝🤝🤝

@vasileseitan6893 3 жыл бұрын

Bravo Very, Very , good job .

@Gs_DIY_ideas 3 жыл бұрын

Thanks

@mrimmortal1579 Ай бұрын

Wow! You did a fantastic job making a lathe-mounted semi-random hole generator! Wait, it’s supposed to be a milling tool? Are you sure?? I thought those were supposed to be made where you have at least some amount of control over the accuracy that they can produce. This is actually kind of a shitty one of those. Oh well… at least it might still be somewhat useful for woodworking.

@user-vb8vt8km9g 3 ай бұрын

😊😮

@okiedoak201 3 жыл бұрын

Nice and simple....👍

@Gs_DIY_ideas 3 жыл бұрын

Thanks

@user-ir4eq3vj1j 3 жыл бұрын

дикое биение патрона, это устройство выкинуть и сделать с лучшей точностью, а это мусор.

@user-mg4kf9lp5d 3 жыл бұрын

Он руками с плашкой нарезал резьбу под патрон, видно не ровно получилось!

@SergeiPetrov 2 жыл бұрын

@@user-mg4kf9lp5d Он проточил вал без задней бабки, это не смущает? У него нет никакого натяга в подшипниках (забитых молотком). Он сделал несколько перестановок детали в трехкулачковом патроне. Патрон посажен не на конус и вообще взят от ручного инструмента. Он вообще наплевал на всю технологию изготовления (и похоже сознательно наплевал).

@user-de9zb7rt2h 4 ай бұрын

Полностью не выдержана технология изготовления изделия, надо подучить теорию, без нее некуда

@Blademasterssss 2 жыл бұрын

Idea is good, Precision not so much.

@user-or3zq8wj8g 3 жыл бұрын

Интересно и как у людей получается нарезать резьбу плашкой без биения патрона???

@user-ds6qf2mv1q 3 жыл бұрын

Прецизионной леркой)))

@user-mg4kf9lp5d 3 жыл бұрын

Он мог на этом станке нарезать резьбу! Было бы в сто раз точнее!

@ll6261 3 жыл бұрын

Borfutter nicht geeignet.

@juansugueti2748 2 жыл бұрын

La idea es buena, pero el eje está totalmente con movimiento. Lástima que ese eje con los rodamientos no esté justo como debería. Como dije antes, la idea es buena pero el trabajo está mal realizado ya que quien lo fabrica se supone que es un tornero

@brunoboscariol5089 3 жыл бұрын

Doveva fare il filetto preciso "col tornio"

@MaMA-yp4bq Жыл бұрын

ມີເຄື່ອງເກົ່າຂາຍບໍ

@user-qc4tl7lc6u 9 ай бұрын

the attachment is way off line..the drill is vibrating mate.... looks good but isn't accurate...

@homemadetools 3 жыл бұрын

Good job. We posted this video in our homemade tools forum this week :)

@ParsMaker 3 жыл бұрын

nice work

@Gs_DIY_ideas 3 жыл бұрын

Thanks ☺️

@avenuex3731 3 жыл бұрын

Runout so bad.....makes one wonder

@vesslewiththepesstle 2 жыл бұрын

Don't grab the swarf off a running lathe, you could loose half an index finger doing that, thank for the vid though

@65cj55 2 жыл бұрын

Nearly Works..

@lajossenkal1543 Жыл бұрын

Ilyet becsukott szemmel csinálok,üt,rázza a gépet,pontatlan

@charlesstaton8104 Жыл бұрын

Why does everyone on KZfaq weld this way? Like they all learned how to weld from the same video of an Indian welding automotive body panels with a rickety stick welder.

@user-pz8to3fo7x 2 жыл бұрын

а что бьет так сильно?

@elsteb3633 Жыл бұрын

Потому что рукожоп. )

@user-pz8to3fo7x Жыл бұрын

@@elsteb3633 рукожопы рулят, сам такой

@ThisIsToolman 5 ай бұрын

The inside race of the bearing protrudes beyond the outside race, which means when you hammer on the inside race your peening the balls against both races. The bearing is ruined.

@ellieprice363 4 ай бұрын

Sorry. Videos at 4X speed are so hard to follow I always delete them.

@jackdawg4579 3 жыл бұрын

Interesting, I reckon you could use that for milling in keyways etc on a round bar held in the lathe jaws.

@toastyovens8777 4 ай бұрын

Holy chatter

@jonykominiarz6714 Жыл бұрын

fajans jakiś

@hayathayat1462 3 жыл бұрын

Bravo Turkey İzmir selâm

@user-qc4tl7lc6u 9 ай бұрын

Slow the video down Dude...It would be nice to hear your commentry..

@harryhartanto1499 3 жыл бұрын

👍👍👍👍

@henrydando 2 жыл бұрын

jesus take the runout

@KIJs-gc6ux 2 жыл бұрын

@Welder Wayne I completely agree. If you would take notice of the critical comments posted here, the quality of your work would increase, potentially raising subscribers rates. The quality of your work here is certainly a reason for not subscribing to your channel, sorry