Making Soft Plastic Fishing Lures For The FIRST TIME! Mistakes Were Made!

Рет қаралды 20,872

Жыл бұрын

We finally got our Do-It Molds kit out and decided to make our first few batches of soft plastic fishing lures! We did SOME research, watched some videos, and even took some of your advice... and we still messed up lol. The good news is, even with the mistakes we made, the soft plastics still came out pretty good! We learned a lot about lure making in just a few hours! Now we are ready to keep learning and getting better! If you want to make your own soft plastics, just head over to Do-It Molds and pick up one of the starter kits! More lure making will be hitting the channel, so be sure to subscribe, and comment below what you think we should make next!
#luremaking #aggressivelyaverageanglers #fishinglures
Join this channel to get access to perks:
/ @aaanglers
Join the Knuklehed Bass Series for a chance to win $10,000!
www.kayakbassfishing.com/knuk...
Check out MONSTERBASS the Better Box and use code SAVE15 to get your first box for $10. LINK BELOW
Aggressively Average Merch: aggressivelyaverageanglers.my...
Brand Ambassador:
Get Your Free 30 Day Audible Trial: www.audibletrial.com/aaanglers
Monsterbass: bit.ly/3ASUNkd
Monsterbass Lunkersticks: shrsl.com/3z15w
Mule Fishing: www.mulefishing.com/?aff=2
Buzbe Tackle Boxes: buzbe.com/burlyfishing10
OKUMA: bit.ly/2Ns0HV6
Soft Steel Line: bit.ly/3GmkMUf
Fishlab Tackle: bit.ly/38i30oJ
Waterland Sunglasses: www.waterlandco.com use code: BURLY15 for 15% off
Aqua Vu: www.aquavu.com/?ref=burlyfishing
Want to send us something to unbox or for the channel? Reach out to us on Instagram (@aaanglers) or email us: info@burlyfishing.com
Follow BurlyFishing:
Podcast: cms.megaphone.fm/channel/WPCM...
Instagram: burlyfishing and paul_j_glass
Facebook: burlyfishing
Subscribe to my channel: bit.ly/3cPZPRG
Tik Tok: www.tiktok.com/@burlyfishing
My Kayak Videos: bit.ly/2S9MJ9R
My Reviews and Unboxings: bit.ly/2yMotE3
My Tackle Hacks: bit.ly/2W0W4lO
My Fishing Videos: bit.ly/2KGrHMe
My Podcast Episodes: bit.ly/35ePCeX

Пікірлер: 120

@aaanglers Жыл бұрын

What should we make next?

@XxNiteStockerxX Жыл бұрын

Something with action; craw, Swimbait/grub, curl tail worm

@Jason-416 Жыл бұрын

Craw/frog with paddle tail lags

@aronziegler1814 Жыл бұрын

Try an open pour mold of some sort.

@cincinnatiking8008 Жыл бұрын

Paddle tail

@oceanstateangling9828 Жыл бұрын

Hey guys. Protips. 1. Denting comes from the cold molds pulling the heat from the plastic at a fast rate, so preheating with a griddle or even a heat gun to reduce the difference from the ambient temp and the mold temps will help reduce that. (Heat gun can also help warm up the injector). 2. The injectors should pull and push way smoother, try using a little worm oil around the o-ring on the plunger and run it up and down a few times until you get a smooth pull. 3. Bubbles will no longer be an issue if you invest in a vacuum chamber (can also be useful in the future if you decide to make your own silicone molds). 3. With pigments/dyes, the more drops/scoops you use, the more saturated the color of the bait, the more opaque (solid as opposed to see through) it will be. Always start with less drops, especially in a laminate/swirl. 4. Before shooting a set to see how it will match up, you can drizzle some plastic off the stirring utensil onto a work surface to see how they blend, using a teaspoon at max vs over 2 oz of plastic. I'm excited for you guys now that you've started pouring yourselves. The Creepy Crawler vibe is exactly how I perceived it when I started pouring a few years ago. Awesome reference. Can't wait to see how you guys progress on your bait making journey. Tight lines. Side note: Paul... NEVER use that much force to try and inject plastisol... if hot plastic shoots out the sides or with those particular non-locking injectors, the tips come off and it all pours out, you can seriously burn yourself, even through clothing.

@paulglass7268 Жыл бұрын

Fantastic tips!

@aaanglers Жыл бұрын

Thanks for alm the tips!

@coty7228 Жыл бұрын

Need to turn your injector, your shooting one color on each side is why your not getting a laminate. Awesome video guys

@aaanglers Жыл бұрын

Did you see the end where these dummies figured it out finally lol

@coty7228 Жыл бұрын

@@aaanglers lol I typed this before I saw the end 🤣

@buschleaguebassin Жыл бұрын

Also had the creepy crawlers set. It was the bomb! Awesome vid guys!

@terenceparrish6292 Жыл бұрын

I wish you guys all the success in this endeavor 🎉🎉🎉😊I love how you get along ssssssoooooo well!! Please keep it up 😊

@aaanglers Жыл бұрын

🤙

@davidwilliams1805 Жыл бұрын

Great video and great job for 1st time! Thanks for sharing and I hope we will see more bait making videos! It would be cool to see you make some swimbaits. #AggressivelyAverageAnglers rocks!!!

@aaanglers Жыл бұрын

On it!

@bdooley8469 Жыл бұрын

World's worst fishing has awesome videos, Chris makes great training videos

@lindakepler8500 5 ай бұрын

Awesome video! I'm going to get my grandson, who is a great fisherman, his own starter kit for Christmas I'm on my way to the Do-It site right now!

@Tightt88 Жыл бұрын

A Doug reference!? Millennials for the WIN!

@aaanglers Жыл бұрын

🙌finally someone caught it! Nice!

@Tightt88 Жыл бұрын

@@aaanglers I was a huge Doug fan. That is, until Disney ruined it lol.

@BrownBaitCo Жыл бұрын

Heck yeah! Glad yall are messing around with baitin now! Those baits look amazing!

@aaanglers Жыл бұрын

Thanks!

@brianbell1851 Жыл бұрын

great video ,,, really loved this one , great job guys

@aaanglers Жыл бұрын

Thanks!

@Darryl_P_ Жыл бұрын

We need more of this!

@aaanglers Жыл бұрын

There will be more!

@chaditudefitness5075 Жыл бұрын

I remember Paul doing an unboxing video for all this stuff. It was in better condition then. A little more dry.

@aaanglers Жыл бұрын

Haha yup!

@bdiax Жыл бұрын

the stale cracker shout out 🤣 im excited to see what you guys cook up with the color combos 🎣

@egomaniac247 Жыл бұрын

put that on a cracka dood

@sportsock42 Жыл бұрын

Nice. You can add some white before the chartreuse. It makes it opaque for more popping chartreuse

@sportsock42 Жыл бұрын

Also, heaven help you when you start playing with highlight powder.

@aaanglers Жыл бұрын

Hahaha thanks!

@bdooley8469 Жыл бұрын

Great first goes on the Baits i think we all have made the same mistakes starting out

@Jason-416 Жыл бұрын

Love this vid. You guys kill me 😂 I’m sure with practice you guy will kill it

@paulglass7268 Жыл бұрын

Eventually lol

@aaanglers Жыл бұрын

Thanks 🙌

@davidrauschenbach6871 Жыл бұрын

Nice colors, Debo for the save!

@aaanglers Жыл бұрын

🙌

@davidrauschenbach6871 Жыл бұрын

@@aaanglers black with white flakes!

@roanoke_yak_angler Жыл бұрын

My favorite stormtroopers. It's a process at first but once do a few it's easy from there

@aaanglers Жыл бұрын

We're here for the process!

@roanoke_yak_angler Жыл бұрын

Killing it!! Keep it up guys. I was gonna do the knucklehead but couldn't make up my mind on which Ned to fish with

@madtownangler Жыл бұрын

I had a friend of a friend that made a metal mould for plastic baits for one of his finals as a tool and die maker. I have a few baits that he made. He had to design the baits and machine them out of metal and used dowel pins to close them instead of hinges. I used to make them years ago in the plastic things that you could only mould one side of a bait and the rest was just flat. I also made a bunch of rods but I figured out It was just cheaper to buy them. I spent hours spinning a rod in my hands to let the coating dry and the first fish I caught the tip broke off

@robertcadou7096 Жыл бұрын

When remelting plastic you will need to cut it up. And in the winter use a heater on the molds and injector

@aaanglers Жыл бұрын

Good call!

@egomaniac247 Жыл бұрын

Great job guys. This is something I've been wanting to do but I want to make my own mold...I want one of the OG banjo minnows with some limper plastic in a smoke color

@aaanglers Жыл бұрын

🤙

@mackflanagan7002 Жыл бұрын

The hollow part of the worm is where you stick your rattle LOL

@aaanglers Жыл бұрын

Perfect 😂

@JerryN856 Жыл бұрын

I don't think that I have ever commented on this channel even though I've been subbed for quite some time. But I gotta say that this was awesome. Enjoyed it very much. Keep up the good work and fun.

@paulglass7268 Жыл бұрын

That’s awesome!!!

@aaanglers Жыл бұрын

Thank you!

@buschleaguebassin Жыл бұрын

BIG SWIMBAITS!!

@michaelm5203 Жыл бұрын

Loved this episode of aggressively entertaining science

@michaelm5203 Жыл бұрын

Would love to see rod making for the next science series

@hollybunn7352 4 сағат бұрын

Don’t breathe in the fumes 😂😂But we did it our entire childhood making creepy crawlers!

@yakkaboy Жыл бұрын

Make sure you are getting a snug fit with that beard! As someone who used to fit test people, most people with any sort of beard, had to shave. It's really difficult to get a proper seal with the mask with a beard in most cases, just food for thought. Safety is always first! I cannot imagine you'd wanna breath in that funky stuff. Great video and keep up the great work. Tight lines!

@aaanglers Жыл бұрын

Thanks! I pulled it super tight. We had the garage open too to help. I can never shave this beard lol, my kids would freak out!

@willtrax71 Жыл бұрын

Very nice can you PLEASE make me some Hellgrammites Lol I can’t find the Yum or afford the Nikko brand.. It’s so exciting making soft plastics I’m glad you guys are getting into it and a partnership in suing with Do It… great video Guys

@paulglass7268 Жыл бұрын

No partnership but they did hook us up with a starter kit

@charlescook94 8 ай бұрын

Man I'm so glad I found a group for my aggressively average fishing skills

@aaanglers 8 ай бұрын

🙌

@IMKINDOFABIGDEAL13 4 ай бұрын

Nice to see some people honoring the show Doug😂

@JeremyMartin-xq7pb Жыл бұрын

Paul was clearly training for this video with his shakeweight.

@paulglass7268 Жыл бұрын

Ope

@aaanglers Жыл бұрын

🤣

@sly4139 Жыл бұрын

Definitely considering this for those long winter months. What is the finished product like. They’re not salted so more of a yum dinger type plastic?

@paulglass7268 Жыл бұрын

Standard plastic at this point, like yum

@aaanglers Жыл бұрын

Very much like a dinger, maybe even softer. Sink rate is still good. Already caught some fish on em so…. They work!

@sly4139 Жыл бұрын

@@aaanglers that would work for me. In New England with damn beaver dams everywhere so I throw the 4” dinger on a super lite 2/0 ewg a lot. Got it from Creek Fishing Adventures. You get a close presentation to the wacky rig but a lot better for around sticks and branches

@bdooley8469 Жыл бұрын

Did the vacuum pump not work that i sent? Don't forget you can heat your molds to prevent prevent bubbles

@aaanglers Жыл бұрын

We’re just getting it going. Gonna try that next!

@team3d180 2 ай бұрын

21:34 10 drops green to 25 yellow is such an odd guess but id bet my money

@viniciussuguio4618 7 ай бұрын

Hello, I would like to know how do I buy the equipment? because I live in Japan and it's difficult to have these materials here!! your video is very good!!

@aaanglers 7 ай бұрын

Thanks! I'm not sure about shipping to Japan.

@AwesomeA 9 ай бұрын

Hey guys I am trying to get into this what are some tips and additional good things I should know

@aaanglers 9 ай бұрын

We've made a couple videos covering the gear and making. More to come! Check out our guys Debo's Fishing and World's Worst Fishing for good how to videos.

@AwesomeA 9 ай бұрын

alright thanks 👍🏻

@FounderOf4 Жыл бұрын

Breaking Bad - Bass Edition! or Breaking Bass!!!!

@cincinnatiking8008 Жыл бұрын

I'm getting Breaking Bad vibes 😂

@aaanglers Жыл бұрын

Yup

@pesca_man 8 ай бұрын

transparent zenko with blast of red blood flakes

@Scoopy99576 11 ай бұрын

Where do you buy the kit

@aaanglers 11 ай бұрын

Do it molds website

@sonnycarey7566 4 ай бұрын

Where did you get the mold

@aaanglers 4 ай бұрын

Do it molds

@user-eb4dl8xj4x 6 ай бұрын

How much did you buy in the box? Price? Can you tell me where to buy it? I'm begging you.

@aaanglers 6 ай бұрын

Everything is on Do It Molds website

@user-eb4dl8xj4x 6 ай бұрын

@@aaanglers thank you

@brucehouze1620 5 күн бұрын

How about red white and blue?

@steinerp Жыл бұрын

Very disappointed you didnt sing spoonman when Paul was banging

@aaanglers Жыл бұрын

Opportunity missed 😂

@tonyparsley641 8 ай бұрын

Lmao. U need me to help you

@charlescook94 8 ай бұрын

Mmm reminds me of how every time I put a bag of scented worms with my worms and it gets a tiny slit in the bottom of the bag every time

@bdooley8469 Жыл бұрын

You can keep reheating your plastisol... Yep just keep watching and it's there

@user-ok2vl1yo5s 7 ай бұрын

Do you know anyone making saltwater big fish soft baits?

@aaanglers 7 ай бұрын

Not really

@lanedavies7 Жыл бұрын

I'm pretty sure your not supposed to shake the plastic that much, :)

@craqerjaq 3 ай бұрын

95% of what I fish with I make myself now....nothing better than that

@XxNiteStockerxX Жыл бұрын

Watch worlds worst fishing. Best channel making plastics

@aaanglers Жыл бұрын

We called them out in the vid. Learning a lot from him

@glennschramm7255 Жыл бұрын

what was the cost of your little bag of worms

@aaanglers Жыл бұрын

You mean adding up the amount of plastisol and colorant we used?

@Comedycompeaux 6 ай бұрын

try to twist as you inject?

@hookreelfishing Жыл бұрын

With some more practice, yall will get better.

@aaanglers Жыл бұрын

🙌

@glxbe Жыл бұрын

pig and elephant DNA just won't splice

@IMKINDOFABIGDEAL13 4 ай бұрын

Hahahahaha

@killgreen420 8 ай бұрын

Turn the injector the other way not in line with the mold

@killgreen420 8 ай бұрын

My bad answered before I finished the video

@T_J_Fishin Жыл бұрын

World's Worst Fishing - Chris Jones absolutely the best bait making videos check him out.

@aaanglers Жыл бұрын

We did and mentioned in the video. Been watching him a while and learning.

@basslesschap346 2 ай бұрын

Gt yourself a heat gun, then warm your molds, I very much liked those 1st neds you made kind of earthy colors, good video guys, lots of fun Lets Go Brandon !

@computeremail4670 3 ай бұрын

Advising the use of a respirator with facial hair is pretty dumb tbh. It's better than nothing, but it's not working as intended. There are dramatic reductions in filter capability due to lack of seal.