The Griffin CAM-LOK™ (Covert Application Mount

The Griffin CAM-LOK™ (Covert Application Mount - Locking)

Рет қаралды 25,884

4 жыл бұрын

The CAM-LOK™ is a patent-pending universal QD piston system for pistol silencers.
Key points - price and inclusions:
 $79 - pistons $59 - adapters
 Utility patent pending
 Taper locking interface ensures security
 ¾” wrench flats for installing adapters to 20/ft lbs
 3, 120degree locking positions held to high QC for imperceptible POI shift regardless of position
used
 17-4 stainless steel
 Nitrided black for increased surface hardness, corrosion, and wear resistance
Thread pitches supported:
 1/2x28
 1/2x28 special (compact 9mm handguns, ex: G43 , Sig P365, etc. )
 13.5x1 LH metric
 .578x28
 16x1 LH
 16x1 RH
 9/16x24
Pistons available :
 Griffin Armament (Fits all booster compatible suppressors)
 Silencerco Octane 1 & 2, Omega 9K & 45K, Hybrid
 Rugged Obsidian
 Dead Air (Ghost, Wolfman, & Oddessa)
 AAC Ti-Rant 45M

Пікірлер: 91

@TopShotDustin 3 жыл бұрын

Cool deal guys! This is gonna rock the pistol suppressor market!

@akiraman21 3 жыл бұрын

the only bright side of 2020 so far

@Killerloop357 3 жыл бұрын

This kinda thing is looooong over due. I am so tired of having to blue loctite my pistol cans to keep them reliably on. Great Job Griffin for being so innovative! This one surely is gonna be a big winner for you.

@tyler6147 3 жыл бұрын

Hell yeah! This is the kind of stuff I like to see. I will be purchasing this in the near future for sure.

@redeyeshooting579 3 жыл бұрын

Just ordered!! Thank you for inventing this. Much need!!

@operator1192 3 жыл бұрын

I’m really excited about this, you guys are constantly innovating and I will definitely be using these, I have a lot of major company pistol cans and a lot of hosts.

@KirShizzle 3 жыл бұрын

Griffin, if you can make the cam look Male act as a standalone muzzle brake you'll have a huge winner.

@MaxairEngineering 3 жыл бұрын

I’m using this. Awesome system! Needs a thread protector option for those of us who don’t wish to run the compensator option.

@bigchuck83918 3 жыл бұрын

Looks like a Great system, will be considering Griffin Armament for my next suppressor purchase. Just waiting for 1/2x28 three lug muzzle devices to become available for the three lug QD kit for my Resistance 22m

@TOL1488 Жыл бұрын

These things are great, thanks for making them

@arnold-moger 3 жыл бұрын

Griffin is so under rated!

@FirearmEnthusiast Жыл бұрын

The future is now. Eliminating the need for excessive parts and changes while making baffle strikes impossible. The solid locking system and QD mechanism has made this product a must for serious end-users.

@dodgersfnshepard8673 3 жыл бұрын

This type of thinking is what brought me to griffin when other companies had the market saturated. My Optimus with original baffles has seen at least 10k various call rounds with no issue other than connecting hassles. Can't wait to see what they've got coming after this! I'm the only griffin guy in my sub club now they all want this. I've got at least 14 emails and Facebook messages over it Keep it up gents, I tip my hat and owe tall a beer

@salvatorehernwood 3 жыл бұрын

This is awesome. Would be very cool if you guys made replacement barrels with the taper and those threads so that you wouldn’t have to remove the adapter to remove the barrel. Also, any chance you will make pistons for yhm and gemtech? If so I need like 50 adapters lol. Thanks

@evangreen7562 3 жыл бұрын

Which models do you have?

@salvatorehernwood 3 жыл бұрын

Evan Green : I have the gemtech “LID” that I use on multiple cans and the Yankee hill machine sidewinder

@mikef5694 3 жыл бұрын

Genius. Ordering one.

@fireboyrasmussen1976 3 жыл бұрын

I wish Griffin would make cam-lok adapters for the popular rimfire cans.

@victorpapaavp 3 жыл бұрын

You have my attention... Will be considering my finances shortly!

@BearClawAK47 3 жыл бұрын

Got mine in last week. So far so good. It will not fit the glock 43x/48. Hopefully they will offer them in the future.

@FFLDealerNetwork 3 жыл бұрын

Yep, I dig it.

@JLR77 3 жыл бұрын

Nice!

@SwornHeresy 3 жыл бұрын

I'd love one that works with the CGS Mod 9

@austingreen3888 3 жыл бұрын

That's available.

@ORLANDOBUSA 3 жыл бұрын

WOW I LOVE IT!!!!

@_DST0NE_ 3 жыл бұрын

Hell yeh im getting this asap!!!!

@BGC903 3 жыл бұрын

Watching from NY 😞 (from TX originally - here for work lol)

@lucasnelson6344 3 жыл бұрын

Thank you 🙏🏼

@ORLANDOBUSA 3 жыл бұрын

What if i have a Silencerco Osprey 45 for 9mm Carbine and i change the piston to 45 and to 40? can this work for my Osprey for it not to ride out of the threads? also do i have to buy new Barrels for this unit? Thanks let me know because this looks great!

@doejohn8674 3 жыл бұрын

Any chance future compatibility with B&T silencers?

@realf1fan22 3 жыл бұрын

Hey guys - I was able to order from Midway USA - they have a free shipping code right now, so I saved a few bucks.

@Backupnow-gf7wb 3 жыл бұрын

Will this fit YHM 9MM SIDEWINDER SOUND SUPPRESSOR ? What part number to order 1/2” x 28, Thank you

@Jakezor 3 жыл бұрын

If feasible please make a piston for the Osprey, I'd love to have this system!

@iMetalocalypse 3 жыл бұрын

It looks like it supports the SilencerCo line. Those pistons are interchangeable, meaning the Osprey is covered you just have to re-index it once it is on.

@SouthernFamilyandFirearms 3 жыл бұрын

love this idea to end pistol can from backing off !! They mention Tirant-45/M on webiste - any idea if that includes my circa 2014' Tirant 9 ??

@Killerloop357 3 жыл бұрын

I strongly suspect the answer is no. The tirant 9 piston is very small and likely will not accomodate this system. I just happened to notice that one day when holding it side by side to other popular 9mm pistons. Almost every other brand uses a single size piston that is bored to accomodate anything from 9mm to 45. Not the tirant series. The 45 piston is larger than the 9.

@evangreen7562 3 жыл бұрын

@@Killerloop357 Roger that, no dice o the tirant 9

@jollygreekgiant7099 3 жыл бұрын

when is the qd comp hitting your website. i cant find it

@Tcgunner Жыл бұрын

Can you make this work with banish line from silencer central?

@alexspencer8904 3 жыл бұрын

Check out the product page and I have a question. How will using a fixed barrel spacer with this system cause damage to the suppressor? I own a 9mm MG and having a taper mount would be a nice sense of security.

@evangreen7562 3 жыл бұрын

It will cause damage with high powered rounds. This is not engineered for anything more than a pistol caliber. You could use it on a 9mm MG but the Low pro 3 lug kit would be better honestly.

@danw5408 3 жыл бұрын

Will the cam lock barrel adapter work its way lose?

@astronautdolphindetective6908 3 жыл бұрын

do you make a adapter for the hybrid46?

@bigshoe84 3 жыл бұрын

So in order to remove the pistol barrel for cleaning you have to take the cam lok piece off that you just torqued on?

@atwoodatwood1820 3 жыл бұрын

D'oh!

@NathanWisniewski 3 жыл бұрын

You probably could just clean around the barrel with it still floating in the slide. Not ideal but probably not a deal breaker for most.

@paulswift4562 3 жыл бұрын

If you have a threaded barrel, you must remove thread protector or any attachment to remove barrel. Inconvenient but you can clean barrel without removal. Also it is not difficult to remove and re-tourque.

@GriffinArmamentOfficial 3 жыл бұрын

you dont need to fully field strip a pistol very often. Every 6 months to a year is adequate depending on volume of shooting. You can clean alot of a pistol without taking it apart. That being said this takes less than a minute to take off when you want to field strip your handgun. DONT USE THREADLOCKER on the adapter and you wont have an issue. 20FT/LBS of torque is recommended

@trunkmonkey56 3 жыл бұрын

Yep, I shoot almost only suppressed and even my 1911 can sit dirty for a few range trips of 200rds each. I'll take needing a wrench to be able to quick attach my obsidian to multiple hosts fast. I don't clean my guns much anyway and they work great or I sell them lol

@f308gtb1977 3 жыл бұрын

Make a piston for the old AAC Evo-.45 and I’ll order one that very day!

@dylanbrown3840 2 жыл бұрын

Can this work with a Rugged obsidian 9 with a fixed barrel adapter on a PCC?

@GriffinArmamentOfficial 2 жыл бұрын

We have a Rugged compatible piston, as well as fixed mounts that fit the cans.

@ma.santiago89 Жыл бұрын

I got my piston today for my rugged and it didn’t fit. It’s just barely too big.

@GriffinArmamentOfficial Жыл бұрын

Definitely get in touch with our customer service team at cs@griffinarmament.com I'm not aware of such an issue happening previously, but maybe they can help remedy the situation

@maybeiam3367 3 жыл бұрын

Is there a point in buying the taper mounts for pistol caliber carbines now that this is available?

@GriffinArmamentOfficial 3 жыл бұрын

The CAM-LOK system is not intended for use on fixed barrels. Therefore is not compatible with PCC's.

@maybeiam3367 3 жыл бұрын

@@GriffinArmamentOfficial does it loosen on fixed barrels?

@carolanne8118 3 жыл бұрын

Is the comp available yet on ur website

@austingreen3888 3 жыл бұрын

No- It will be a few weeks. We've made prototypes but got some initial orders on other product and that set back the comp manufacturing.

@TheCjanes11 2 жыл бұрын

What piston is used for rugged ?

@GriffinArmamentOfficial 2 жыл бұрын

it's on the dropdown options on the product page. it's the SilencerCo*/Rugged/Dead Air(Odessa)/OSS Rad 9&45 option

@coreylancaster4917 2 жыл бұрын

Does this work with all suppressors or only griffin suppressor

@GriffinArmamentOfficial 2 жыл бұрын

We offer options that work with other branded suppressors. www.griffinarmament.com/cam-lok-pistons-for-tilt-barrel-pistols/

@coreylancaster4917 2 жыл бұрын

@@GriffinArmamentOfficial was hoping for compatibility with the sig mod x9. Thanks for the reply! Qd mount would be nice. Next can will be a griffin

@thomassalisbury4049 3 жыл бұрын

GREAT TO HAVE ON MY WEAPONS

@madmac2419 2 жыл бұрын

Take my money nooow!

@ef6820 3 жыл бұрын

This just made my pistons obsolete Screw that, this just made all pistons obsolete!!

@goober8598 3 жыл бұрын

Msrp?

@atwoodatwood1820 3 жыл бұрын

How do I remove my barrel to clean once I've torqued on the adapter?

@f308gtb1977 3 жыл бұрын

You don’t, but neither do you really need to clean the outside of the barrel.

@trunkmonkey56 3 жыл бұрын

If you need to field strip the pistol and remove the barrel you will need to remove the 20ft-lbs of torque you applied to the adaptor on the end of the barrel and take it off. It's not permanently attached, and you shouldn't clean your gun every range trip unless you like taking this adaptor on and off all the time. I leave my guns dirty for at least 500 rounds and a couple range trips but often more than that. They'll be fine and it's only a socket or wrench to get it on and off.

@f308gtb1977 3 жыл бұрын

What he said.👆🏻

@LJK301 3 жыл бұрын

Isn't this the exact same thing as A-Tec's A-LOCK?

@tyler6147 3 жыл бұрын

I don't think theirs is compatible with pistol suppressors using nielsen devices.

@austingreen3888 3 жыл бұрын

No the A-lock uses a conventional thread, and has only one compatible attachment orientation ala Maxim's original interrupted thread system- the A-lok is the maxim system, interrupted in 3 places rather than 2. This system uses three identical lobes of cam like thread geometry (a novel interface) allowing attachment in each 120 degree orientation possible- eliminating the need to search for or identify the correct mating axial orientation for mounting. This system doesn't use a conventional thread, or a multiple index thread. The thread was not supported by a toolpath in the CAM system, because it didn't exist.

@LJK301 3 жыл бұрын

@@austingreen3888 Gotcha. Thanks for the explanation.

@clintmullins8670 2 жыл бұрын

@@austingreen3888 excellent answe and explanation, thank you!

@deathcogunit106 3 жыл бұрын

2:53 dat nose

@clintmullins8670 2 жыл бұрын

Lol

@djsity 3 жыл бұрын

IT . IS. FUN. TO. TALK. LIKE. A. ROBOT.

@daviddegeorge1665 3 жыл бұрын

Looks like a solution to a problem that doesn’t exist . Is it really that hard to screw a can down 4 turns . Wow we are getting lazy lol great design though

@clintmullins8670 2 жыл бұрын

Actually it takes 8 and 1/2

@clintmullins8670 2 жыл бұрын

Not to ride your ass, but it was impressive to see him shoot for suppressors Two Shots each and under 20 seconds. Have you had a chance to try the system yet

@cookiesinmynose69 3 жыл бұрын

So basically a piston 3 lug.

@spys0ldier 3 жыл бұрын

No. It’s a 3 lug in a sense that they Miller 3 slots to avoid having to thread the piston all the way down like traditional ones. The angled taper is where this shines as it’ll keep cans from unthreading during recoil.

@LonghornShootingSports 3 жыл бұрын

This is really cool! Small suggestion? Would be a better video, especially towards newcomers to firearms if the people in the video didn't point loaded firearms at the body parts.

@austingreen3888 3 жыл бұрын

It's not possible in a product demoing speed to be slow.

@evangreen7562 3 жыл бұрын

Your hand has to come across the centerline of the barrel bore in order to attach something to the firearm. Proper safety, keeping your finger off the trigger, treating the firearm always as if it is loaded are things that will prevent any dangerous events ever occurring. For anyone reading this if you feel at all under-trained or uncomfortable/ill-equipped to safely handle a firearm you should seek professional training from an accredited instructor.

@clintmullins8670 2 жыл бұрын

Why are we even talking about this